adapters/mpt_sas/mptsas_raid.c

	mptsas_raid.c revision cdc7c7fe7b52f0c955073224bbd5fd2002db45d0
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 * Copyright (c) 2000 to 2010, LSI Corporation.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms of all code within
 * this file that is exclusively owned by LSI, with or without
 * modification, is permitted provided that, in addition to the CDDL 1.0
 * License requirements, the following conditions are met:
 *
 *    Neither the name of the author nor the names of its contributors may be
 *    used to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
 * DAMAGE.
 */

/*
 * mptsas_raid - This file contains all the RAID related functions for the
 * MPT interface.
 */

#if defined(lint) || defined(DEBUG)
#define MPTSAS_DEBUG
#endif

#define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX    2

/*
 * standard header files
 */
#include <sys/note.h>
#include <sys/scsi/scsi.h>
#include <sys/byteorder.h>
#include <sys/raidioctl.h>

#pragma pack(1)

#include <sys/scsi/adapters/mpt_sas/mpi/mpi2_type.h>
#include <sys/scsi/adapters/mpt_sas/mpi/mpi2.h>
#include <sys/scsi/adapters/mpt_sas/mpi/mpi2_cnfg.h>
#include <sys/scsi/adapters/mpt_sas/mpi/mpi2_init.h>
#include <sys/scsi/adapters/mpt_sas/mpi/mpi2_ioc.h>
#include <sys/scsi/adapters/mpt_sas/mpi/mpi2_raid.h>
#include <sys/scsi/adapters/mpt_sas/mpi/mpi2_tool.h>

#pragma pack()

/*
 * private header files.
 */
#include <sys/scsi/adapters/mpt_sas/mptsas_var.h>

static int mptsas_get_raid_wwid(mptsas_t *mpt, mptsas_raidvol_t *raidvol);

extern int mptsas_check_dma_handle(ddi_dma_handle_t handle);
extern int mptsas_check_acc_handle(ddi_acc_handle_t handle);
extern mptsas_target_t *mptsas_tgt_alloc(mptsas_hash_table_t *, uint16_t,
    uint64_t, uint32_t, mptsas_phymask_t, uint8_t);

static int
mptsas_raidconf_page_0_cb(mptsas_t *mpt, caddr_t page_memp,
    ddi_acc_handle_t accessp, uint16_t iocstatus, uint32_t iocloginfo,
    va_list ap)
{
#ifndef __lock_lint
    _NOTE(ARGUNUSED(ap))
#endif
    pMpi2RaidConfigurationPage0_t   raidconfig_page0;
    pMpi2RaidConfig0ConfigElement_t element;
    uint32_t *confignum;
    int rval = DDI_SUCCESS, i;
    uint8_t numelements, vol, disk;
    uint16_t elementtype, voldevhandle;
    uint16_t etype_vol, etype_pd, etype_hs;
    uint16_t etype_oce;
    mptsas_slots_t *slots = mpt->m_active;
    m_raidconfig_t *raidconfig;
    uint64_t raidwwn;
    uint32_t native;
    mptsas_target_t *ptgt;
    uint32_t configindex;

    if (iocstatus == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) {
        return (DDI_FAILURE);
    }

    if (iocstatus != MPI2_IOCSTATUS_SUCCESS) {
        mptsas_log(mpt, CE_WARN, "mptsas_get_raid_conf_page0 "
            "config: IOCStatus=0x%x, IOCLogInfo=0x%x",
            iocstatus, iocloginfo);
        rval = DDI_FAILURE;
        return (rval);
    }
    confignum = va_arg(ap,  uint32_t *);
    configindex = va_arg(ap, uint32_t);
    raidconfig_page0 = (pMpi2RaidConfigurationPage0_t)page_memp;
    /*
     * Get all RAID configurations.
     */
    etype_vol = MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT;
    etype_pd = MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT;
    etype_hs = MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT;
    etype_oce = MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT;
    /*
     * Set up page address for next time through.
     */
    *confignum =  ddi_get8(accessp,
        &raidconfig_page0->ConfigNum);

    /*
     * Point to the right config in the structure.
     * Increment the number of valid RAID configs.
     */
    raidconfig = &slots->m_raidconfig[configindex];
    slots->m_num_raid_configs++;

    /*
     * Set the native flag if this is not a foreign
     * configuration.
     */
    native = ddi_get32(accessp, &raidconfig_page0->Flags);
    if (native & MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG) {
        native = FALSE;
    } else {
        native = TRUE;
    }
    raidconfig->m_native = (uint8_t)native;

    /*
     * Get volume information for the volumes in the
     * config.
     */
    numelements = ddi_get8(accessp, &raidconfig_page0->NumElements);
    vol = 0;
    disk = 0;
    element = (pMpi2RaidConfig0ConfigElement_t)
        &raidconfig_page0->ConfigElement;

    for (i = 0; ((i < numelements) && native); i++, element++) {
        /*
         * Get the element type.  Could be Volume,
         * PhysDisk, Hot Spare, or Online Capacity
         * Expansion PhysDisk.
         */
        elementtype = ddi_get16(accessp, &element->ElementFlags);
        elementtype &= MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;

        /*
         * For volumes, get the RAID settings and the
         * WWID.
         */
        if (elementtype == etype_vol) {
            voldevhandle = ddi_get16(accessp,
                &element->VolDevHandle);
            raidconfig->m_raidvol[vol].m_israid = 1;
            raidconfig->m_raidvol[vol].
                m_raidhandle = voldevhandle;
            /*
             * Get the settings for the raid
             * volume.  This includes the
             * DevHandles for the disks making up
             * the raid volume.
             */
            if (mptsas_get_raid_settings(mpt,
                &raidconfig->m_raidvol[vol]))
                continue;

            /*
             * Get the WWID of the RAID volume for
             * SAS HBA
             */
            if (mptsas_get_raid_wwid(mpt,
                &raidconfig->m_raidvol[vol]))
                continue;

            raidwwn = raidconfig->m_raidvol[vol].
                m_raidwwid;

            /*
             * RAID uses phymask of 0.
             */
            ptgt = mptsas_tgt_alloc(&slots->m_tgttbl,
                voldevhandle, raidwwn, 0, 0, 0);

            raidconfig->m_raidvol[vol].m_raidtgt =
                ptgt;

            /*
             * Increment volume index within this
             * raid config.
             */
            vol++;
        } else if ((elementtype == etype_pd) ||
            (elementtype == etype_hs) ||
            (elementtype == etype_oce)) {
            /*
             * For all other element types, put
             * their DevHandles in the phys disk
             * list of the config.  These are all
             * some variation of a Phys Disk and
             * this list is used to keep these
             * disks from going online.
             */
            raidconfig->m_physdisk_devhdl[disk] = ddi_get16(accessp,
                &element->PhysDiskDevHandle);

            /*
             * Increment disk index within this
             * raid config.
             */
            disk++;
        }
    }

    return (rval);
}

int
mptsas_get_raid_info(mptsas_t *mpt)
{
    int rval = DDI_SUCCESS;
    uint32_t confignum, pageaddress;
    uint8_t configindex;
    mptsas_slots_t *slots = mpt->m_active;

    ASSERT(mutex_owned(&mpt->m_mutex));

    /*
     * Clear all RAID info before starting.
     */
    bzero(slots->m_raidconfig, sizeof (slots->m_raidconfig));
    slots->m_num_raid_configs = 0;

    configindex = 0;
    confignum = 0xff;
    pageaddress = MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM | confignum;
    while (rval == DDI_SUCCESS) {
        /*
         * Get the header and config page.  reply contains the reply
         * frame, which holds status info for the request.
         */
        rval = mptsas_access_config_page(mpt,
            MPI2_CONFIG_ACTION_PAGE_READ_CURRENT,
            MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG, 0, pageaddress,
            mptsas_raidconf_page_0_cb, &confignum, configindex);
        configindex++;
        pageaddress = MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM |
            confignum;
    }

    return (rval);
}

static int
mptsas_raidvol_page_0_cb(mptsas_t *mpt, caddr_t page_memp,
    ddi_acc_handle_t accessp, uint16_t iocstatus, uint32_t iocloginfo,
    va_list ap)
{
#ifndef __lock_lint
    _NOTE(ARGUNUSED(ap))
#endif
    pMpi2RaidVolPage0_t raidpage;
    int rval = DDI_SUCCESS, i;
    mptsas_raidvol_t *raidvol;
    uint8_t numdisks, volstate, voltype, physdisknum;
    uint32_t volsetting;
    uint32_t statusflags, resync_flag;

    if (iocstatus == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
        return (DDI_FAILURE);

    if (iocstatus != MPI2_IOCSTATUS_SUCCESS) {
        mptsas_log(mpt, CE_WARN, "mptsas_raidvol_page0_cb "
            "config: IOCStatus=0x%x, IOCLogInfo=0x%x",
            iocstatus, iocloginfo);
        rval = DDI_FAILURE;
        return (rval);
    }

    raidvol = va_arg(ap,  mptsas_raidvol_t *);

    raidpage = (pMpi2RaidVolPage0_t)page_memp;
    volstate = ddi_get8(accessp, &raidpage->VolumeState);
    volsetting = ddi_get32(accessp,
        (uint32_t *)(void *)&raidpage->VolumeSettings);
    statusflags = ddi_get32(accessp, &raidpage->VolumeStatusFlags);
    voltype = ddi_get8(accessp, &raidpage->VolumeType);

    raidvol->m_state = volstate;
    raidvol->m_statusflags = statusflags;
    /*
     * Volume size is not used right now. Set to 0.
     */
    raidvol->m_raidsize = 0;
    raidvol->m_settings = volsetting;
    raidvol->m_raidlevel = voltype;

    if (statusflags & MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED) {
        mptsas_log(mpt, CE_NOTE, "?Volume %d is quiesced\n",
            raidvol->m_raidhandle);
    }

    if (statusflags &
        MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
        mptsas_log(mpt, CE_NOTE, "?Volume %d is resyncing\n",
            raidvol->m_raidhandle);
    }

    resync_flag = MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS;
    switch (volstate) {
    case MPI2_RAID_VOL_STATE_OPTIMAL:
        mptsas_log(mpt, CE_NOTE, "?Volume %d is "
            "optimal\n", raidvol->m_raidhandle);
        break;
    case MPI2_RAID_VOL_STATE_DEGRADED:
        if ((statusflags & resync_flag) == 0) {
            mptsas_log(mpt, CE_WARN, "Volume %d "
                "is degraded\n",
                raidvol->m_raidhandle);
        }
        break;
    case MPI2_RAID_VOL_STATE_FAILED:
        mptsas_log(mpt, CE_WARN, "Volume %d is "
            "failed\n", raidvol->m_raidhandle);
        break;
    case MPI2_RAID_VOL_STATE_MISSING:
        mptsas_log(mpt, CE_WARN, "Volume %d is "
            "missing\n", raidvol->m_raidhandle);
        break;
    default:
        break;
    }
    numdisks = raidpage->NumPhysDisks;
    raidvol->m_ndisks = numdisks;
    for (i = 0; i < numdisks; i++) {
        physdisknum = raidpage->PhysDisk[i].PhysDiskNum;
        raidvol->m_disknum[i] = physdisknum;
        if (mptsas_get_physdisk_settings(mpt, raidvol,
            physdisknum))
            break;
    }
    return (rval);
}

int
mptsas_get_raid_settings(mptsas_t *mpt, mptsas_raidvol_t *raidvol)
{
    int rval = DDI_SUCCESS;
    uint32_t page_address;

    ASSERT(mutex_owned(&mpt->m_mutex));

    /*
     * Get the header and config page.  reply contains the reply frame,
     * which holds status info for the request.
     */
    page_address = (MPI2_RAID_VOLUME_PGAD_FORM_MASK &
        MPI2_RAID_VOLUME_PGAD_FORM_HANDLE) | raidvol->m_raidhandle;
    rval = mptsas_access_config_page(mpt,
        MPI2_CONFIG_ACTION_PAGE_READ_CURRENT,
        MPI2_CONFIG_PAGETYPE_RAID_VOLUME, 0, page_address,
        mptsas_raidvol_page_0_cb, raidvol);

    return (rval);
}

static int
mptsas_raidvol_page_1_cb(mptsas_t *mpt, caddr_t page_memp,
    ddi_acc_handle_t accessp, uint16_t iocstatus, uint32_t iocloginfo,
    va_list ap)
{
#ifndef __lock_lint
    _NOTE(ARGUNUSED(ap))
#endif
    pMpi2RaidVolPage1_t raidpage;
    int         rval = DDI_SUCCESS, i;
    uint8_t         *sas_addr = NULL;
    uint8_t         tmp_sas_wwn[SAS_WWN_BYTE_SIZE];
    uint64_t        *sas_wwn;

    if (iocstatus != MPI2_IOCSTATUS_SUCCESS) {
        mptsas_log(mpt, CE_WARN, "mptsas_raidvol_page_1_cb "
            "config: IOCStatus=0x%x, IOCLogInfo=0x%x",
            iocstatus, iocloginfo);
        rval = DDI_FAILURE;
        return (rval);
    }
    sas_wwn = va_arg(ap, uint64_t *);

    raidpage = (pMpi2RaidVolPage1_t)page_memp;
    sas_addr = (uint8_t *)(&raidpage->WWID);
    for (i = 0; i < SAS_WWN_BYTE_SIZE; i++) {
        tmp_sas_wwn[i] = ddi_get8(accessp, sas_addr + i);
    }
    bcopy(tmp_sas_wwn, sas_wwn, SAS_WWN_BYTE_SIZE);
    *sas_wwn = LE_64(*sas_wwn);
    return (rval);
}

static int
mptsas_get_raid_wwid(mptsas_t *mpt, mptsas_raidvol_t *raidvol)
{
    int rval = DDI_SUCCESS;
    uint32_t page_address;
    uint64_t sas_wwn;

    ASSERT(mutex_owned(&mpt->m_mutex));

    /*
     * Get the header and config page.  reply contains the reply frame,
     * which holds status info for the request.
     */
    page_address = (MPI2_RAID_VOLUME_PGAD_FORM_MASK &
        MPI2_RAID_VOLUME_PGAD_FORM_HANDLE) | raidvol->m_raidhandle;
    rval = mptsas_access_config_page(mpt,
        MPI2_CONFIG_ACTION_PAGE_READ_CURRENT,
        MPI2_CONFIG_PAGETYPE_RAID_VOLUME, 1, page_address,
        mptsas_raidvol_page_1_cb, &sas_wwn);

    /*
     * Get the required information from the page.
     */
    if (rval == DDI_SUCCESS) {

        /*
         * replace top nibble of WWID of RAID to '3' for OBP
         */
        sas_wwn = MPTSAS_RAID_WWID(sas_wwn);
        raidvol->m_raidwwid = sas_wwn;
    }

done:
    return (rval);
}

static int
mptsas_raidphydsk_page_0_cb(mptsas_t *mpt, caddr_t page_memp,
    ddi_acc_handle_t accessp, uint16_t iocstatus, uint32_t iocloginfo,
    va_list ap)
{
#ifndef __lock_lint
    _NOTE(ARGUNUSED(ap))
#endif
    pMpi2RaidPhysDiskPage0_t    diskpage;
    int         rval = DDI_SUCCESS;
    uint16_t        *devhdl;
    uint8_t         *state;

    if (iocstatus == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
        return (DDI_FAILURE);

    if (iocstatus != MPI2_IOCSTATUS_SUCCESS) {
        mptsas_log(mpt, CE_WARN, "mptsas_raidphydsk_page0_cb "
            "config: IOCStatus=0x%x, IOCLogInfo=0x%x",
            iocstatus, iocloginfo);
        rval = DDI_FAILURE;
        return (rval);
    }
    devhdl = va_arg(ap, uint16_t *);
    state = va_arg(ap, uint8_t *);
    diskpage = (pMpi2RaidPhysDiskPage0_t)page_memp;
    *devhdl = ddi_get16(accessp, &diskpage->DevHandle);
    *state = ddi_get8(accessp, &diskpage->PhysDiskState);
    return (rval);
}

int
mptsas_get_physdisk_settings(mptsas_t *mpt, mptsas_raidvol_t *raidvol,
    uint8_t physdisknum)
{
    int         rval = DDI_SUCCESS, i;
    uint8_t         state;
    uint16_t        devhdl;
    uint32_t        page_address;

    ASSERT(mutex_owned(&mpt->m_mutex));

    /*
     * Get the header and config page.  reply contains the reply frame,
     * which holds status info for the request.
     */
    page_address = (MPI2_PHYSDISK_PGAD_FORM_MASK &
        MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM) | physdisknum;
    rval = mptsas_access_config_page(mpt,
        MPI2_CONFIG_ACTION_PAGE_READ_CURRENT,
        MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK, 0, page_address,
        mptsas_raidphydsk_page_0_cb, &devhdl, &state);

    /*
     * Get the required information from the page.
     */
    if (rval == DDI_SUCCESS) {
        for (i = 0; i < MPTSAS_MAX_DISKS_IN_VOL; i++) {
            /* find the correct position in the arrays */
            if (raidvol->m_disknum[i] == physdisknum)
                break;
        }
        raidvol->m_devhdl[i] = devhdl;

        switch (state) {
            case MPI2_RAID_PD_STATE_OFFLINE:
                raidvol->m_diskstatus[i] =
                    RAID_DISKSTATUS_FAILED;
                break;

            case MPI2_RAID_PD_STATE_HOT_SPARE:
            case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
            case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
                break;

            case MPI2_RAID_PD_STATE_DEGRADED:
            case MPI2_RAID_PD_STATE_OPTIMAL:
            case MPI2_RAID_PD_STATE_REBUILDING:
            case MPI2_RAID_PD_STATE_ONLINE:
            default:
                raidvol->m_diskstatus[i] =
                    RAID_DISKSTATUS_GOOD;
                break;
        }
    }

    return (rval);
}

/*
 * RAID Action for System Shutdown. This request uses the dedicated TM slot to
 * avoid a call to mptsas_save_cmd.  Since Solaris requires that the mutex is
 * not held during the mptsas_quiesce function, this RAID action must not use
 * the normal code path of requests and replies.
 */
void
mptsas_raid_action_system_shutdown(mptsas_t *mpt)
{
    pMpi2RaidActionRequest_t    action;
    uint8_t             ir_active = FALSE, reply_type;
    uint8_t             function, found_reply = FALSE;
    uint16_t            SMID, action_type;
    mptsas_slots_t          *slots = mpt->m_active;
    int             config, vol;
    mptsas_cmd_t            *cmd;
    uint32_t            request_desc_low, reply_addr;
    int             cnt;
    pMpi2ReplyDescriptorsUnion_t    reply_desc_union;
    pMPI2DefaultReply_t     reply;
    pMpi2AddressReplyDescriptor_t   address_reply;

    /*
     * Before doing the system shutdown RAID Action, make sure that the IOC
     * supports IR and make sure there is a valid volume for the request.
     */
    if (mpt->m_ir_capable) {
        for (config = 0; (config < slots->m_num_raid_configs) &&
            (!ir_active); config++) {
            for (vol = 0; vol < MPTSAS_MAX_RAIDVOLS; vol++) {
                if (slots->m_raidconfig[config].m_raidvol[vol].
                    m_israid) {
                    ir_active = TRUE;
                    break;
                }
            }
        }
    }
    if (!ir_active) {
        return;
    }

    /*
     * If TM slot is already being used (highly unlikely), show message and
     * don't issue the RAID action.
     */
    if (slots->m_slot[MPTSAS_TM_SLOT(mpt)] != NULL) {
        mptsas_log(mpt, CE_WARN, "RAID Action slot in use.  Cancelling"
            " System Shutdown RAID Action.\n");
        return;
    }

    /*
     * Create the cmd and put it in the dedicated TM slot.
     */
    cmd = &(mpt->m_event_task_mgmt.m_event_cmd);
    bzero((caddr_t)cmd, sizeof (*cmd));
    cmd->cmd_pkt = NULL;
    cmd->cmd_slot = MPTSAS_TM_SLOT(mpt);
    slots->m_slot[MPTSAS_TM_SLOT(mpt)] = cmd;

    /*
     * Form message for raid action.
     */
    action = (pMpi2RaidActionRequest_t)(mpt->m_req_frame +
        (mpt->m_req_frame_size * cmd->cmd_slot));
    bzero(action, mpt->m_req_frame_size);
    action->Function = MPI2_FUNCTION_RAID_ACTION;
    action->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;

    /*
     * Send RAID Action.
     */
    (void) ddi_dma_sync(mpt->m_dma_req_frame_hdl, 0, 0,
        DDI_DMA_SYNC_FORDEV);
    request_desc_low = (cmd->cmd_slot << 16) +
        MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
    MPTSAS_START_CMD(mpt, request_desc_low, 0);

    /*
     * Even though reply does not matter because the system is shutting
     * down, wait no more than 5 seconds here to get the reply just because
     * we don't want to leave it hanging if it's coming.  Poll because
     * interrupts are disabled when this function is called.
     */
    for (cnt = 0; cnt < 5000; cnt++) {
        /*
         * Check for a reply.
         */
        (void) ddi_dma_sync(mpt->m_dma_post_queue_hdl, 0, 0,
            DDI_DMA_SYNC_FORCPU);

        reply_desc_union = (pMpi2ReplyDescriptorsUnion_t)
            MPTSAS_GET_NEXT_REPLY(mpt, mpt->m_post_index);

        if (ddi_get32(mpt->m_acc_post_queue_hdl,
            &reply_desc_union->Words.Low) == 0xFFFFFFFF ||
            ddi_get32(mpt->m_acc_post_queue_hdl,
            &reply_desc_union->Words.High) == 0xFFFFFFFF) {
            drv_usecwait(1000);
            continue;
        }

        /*
         * There is a reply.  If it's not an address reply, ignore it.
         */
        reply_type = ddi_get8(mpt->m_acc_post_queue_hdl,
            &reply_desc_union->Default.ReplyFlags);
        reply_type &= MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
        if (reply_type != MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
            goto clear_and_continue;
        }

        /*
         * SMID must be the TM slot since that's what we're using for
         * this RAID action.  If not, ignore this reply.
         */
        address_reply =
            (pMpi2AddressReplyDescriptor_t)reply_desc_union;
        SMID = ddi_get16(mpt->m_acc_post_queue_hdl,
            &address_reply->SMID);
        if (SMID != MPTSAS_TM_SLOT(mpt)) {
            goto clear_and_continue;
        }

        /*
         * If reply frame is not in the proper range ignore it.
         */
        reply_addr = ddi_get32(mpt->m_acc_post_queue_hdl,
            &address_reply->ReplyFrameAddress);
        if ((reply_addr < mpt->m_reply_frame_dma_addr) ||
            (reply_addr >= (mpt->m_reply_frame_dma_addr +
            (mpt->m_reply_frame_size * mpt->m_free_queue_depth))) ||
            ((reply_addr - mpt->m_reply_frame_dma_addr) %
            mpt->m_reply_frame_size != 0)) {
            goto clear_and_continue;
        }

        /*
         * If not a RAID action reply ignore it.
         */
        (void) ddi_dma_sync(mpt->m_dma_reply_frame_hdl, 0, 0,
            DDI_DMA_SYNC_FORCPU);
        reply = (pMPI2DefaultReply_t)(mpt->m_reply_frame +
            (reply_addr - mpt->m_reply_frame_dma_addr));
        function = ddi_get8(mpt->m_acc_reply_frame_hdl,
            &reply->Function);
        if (function != MPI2_FUNCTION_RAID_ACTION) {
            goto clear_and_continue;
        }

        /*
         * Finally, make sure this is the System Shutdown RAID action.
         * If not, ignore reply.
         */
        action_type = ddi_get16(mpt->m_acc_reply_frame_hdl,
            &reply->FunctionDependent1);
        if (action_type !=
            MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED) {
            goto clear_and_continue;
        }
        found_reply = TRUE;

clear_and_continue:
        /*
         * Clear the reply descriptor for re-use and increment index.
         */
        ddi_put64(mpt->m_acc_post_queue_hdl,
            &((uint64_t *)(void *)mpt->m_post_queue)[mpt->m_post_index],
            0xFFFFFFFFFFFFFFFF);
        (void) ddi_dma_sync(mpt->m_dma_post_queue_hdl, 0, 0,
            DDI_DMA_SYNC_FORDEV);

        /*
         * Update the global reply index and keep looking for the
         * reply if not found yet.
         */
        if (++mpt->m_post_index == mpt->m_post_queue_depth) {
            mpt->m_post_index = 0;
        }
        ddi_put32(mpt->m_datap, &mpt->m_reg->ReplyPostHostIndex,
            mpt->m_post_index);
        if (!found_reply) {
            continue;
        }

        break;
    }

    /*
     * clear the used slot as the last step.
     */
    slots->m_slot[MPTSAS_TM_SLOT(mpt)] = NULL;
}

int
mptsas_delete_volume(mptsas_t *mpt, uint16_t volid)
{
    int     config, i = 0, vol = (-1);
    mptsas_slots_t  *slots = mpt->m_active;

    for (config = 0; (config < slots->m_num_raid_configs) && (vol != i);
        config++) {
        for (i = 0; i < MPTSAS_MAX_RAIDVOLS; i++) {
            if (slots->m_raidconfig[config].m_raidvol[i].
                m_raidhandle == volid) {
                vol = i;
                break;
            }
        }
    }

    if (vol < 0) {
        mptsas_log(mpt, CE_WARN, "raid doesn't exist at specified "
            "target.");
        return (-1);
    }

    slots->m_raidconfig[config].m_raidvol[vol].m_israid = 0;
    slots->m_raidconfig[config].m_raidvol[vol].m_ndisks = 0;
    for (i = 0; i < MPTSAS_MAX_DISKS_IN_VOL; i++) {
        slots->m_raidconfig[config].m_raidvol[vol].m_disknum[i] = 0;
        slots->m_raidconfig[config].m_raidvol[vol].m_devhdl[i] = 0;
    }

    return (0);
}