common/io/power.c

	power.c revision 9f43a0a2daf56ad3ad8d54fcd9a38e8f649bf99b
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident   "%Z%%M% %I% %E% SMI"

/*
 *  Power Button Driver
 *
 *  This driver handles interrupt generated by the power button on
 *  platforms with "power" device node which has "button" property.
 *  Currently, these platforms are:
 *
 *      ACPI-enabled x86/x64 platforms
 *      Ultra-5_10, Ultra-80, Sun-Blade-100, Sun-Blade-150,
 *      Sun-Blade-1500, Sun-Blade-2500,
 *      Sun-Fire-V210, Sun-Fire-V240, Netra-240
 *
 *  Only one instance is allowed to attach.  In order to know when
 *  an application that has opened the device is going away, a new
 *  minor clone is created for each open(9E) request.  There are
 *  allocations for creating minor clones between 1 and 255.  The ioctl
 *  interface is defined by pbio(7I) and approved as part of
 *  PSARC/1999/393 case.
 */

#include <sys/types.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/ddi_impldefs.h>
#include <sys/cmn_err.h>
#include <sys/errno.h>
#include <sys/modctl.h>
#include <sys/machsystm.h>
#include <sys/open.h>
#include <sys/stat.h>
#include <sys/poll.h>
#include <sys/pbio.h>
#ifdef  ACPI_POWER_BUTTON
#include <sys/acpi/acpi.h>
#include <sys/acpica.h>
#endif  /* ACPI_POWER_BUTTON */

/*
 * Maximum number of clone minors that is allowed.  This value
 * is defined relatively low to save memory.
 */
#define POWER_MAX_CLONE 256

/*
 * Minor number is instance << 8 + clone minor from range 1-255; clone 0
 * is reserved for "original" minor.
 */
#define POWER_MINOR_TO_CLONE(minor) ((minor) & (POWER_MAX_CLONE - 1))

/*
 * Power Button Abort Delay
 */
#define ABORT_INCREMENT_DELAY   10

/*
 * Driver global variables
 */
static void *power_state;
static int power_inst = -1;

static hrtime_t power_button_debounce = NANOSEC/MILLISEC*10;
static hrtime_t power_button_abort_interval = 1.5 * NANOSEC;
static int  power_button_abort_presses = 3;
static int  power_button_abort_enable = 1;
static int  power_button_enable = 1;

static int  power_button_pressed = 0;
static int  power_button_cancel = 0;
static int  power_button_timeouts = 0;
static int  timeout_cancel = 0;
static int  additional_presses = 0;

/*
 * Function prototypes
 */
static int power_attach(dev_info_t *, ddi_attach_cmd_t);
static int power_detach(dev_info_t *, ddi_detach_cmd_t);
static int power_getinfo(dev_info_t *, ddi_info_cmd_t, void *, void **);
static int power_open(dev_t *, int, int, cred_t *);
static int power_close(dev_t, int, int, cred_t *);
static int power_ioctl(dev_t, int, intptr_t, int, cred_t *, int *);
static int power_chpoll(dev_t, short, int, short *, struct pollhead **);
#ifndef ACPI_POWER_BUTTON
static uint_t power_high_intr(caddr_t);
#endif
static uint_t power_soft_intr(caddr_t);
static uint_t power_issue_shutdown(caddr_t);
static void power_timeout(caddr_t);
static void power_log_message(void);

/*
 * Structure used in the driver
 */
struct power_soft_state {
    dev_info_t  *dip;       /* device info pointer */
    kmutex_t    power_mutex;    /* mutex lock */
    kmutex_t    power_intr_mutex; /* interrupt mutex lock */
    ddi_iblock_cookie_t soft_iblock_cookie; /* holds interrupt cookie */
    ddi_iblock_cookie_t high_iblock_cookie; /* holds interrupt cookie */
    ddi_softintr_t  softintr_id;    /* soft interrupt id */
    uchar_t     clones[POWER_MAX_CLONE]; /* array of minor clones */
    int     monitor_on; /* clone monitoring the button event */
                    /* clone 0 indicates no one is */
                    /* monitoring the button event */
    pollhead_t  pollhd;     /* poll head struct */
    int     events;     /* bit map of occured events */
    int     shutdown_pending; /* system shutdown in progress */
#ifdef  ACPI_POWER_BUTTON
    boolean_t   fixed_attached; /* true means fixed is attached */
    boolean_t   gpe_attached;   /* true means GPE is attached */
    ACPI_HANDLE button_obj; /* handle to device power button */
#else
    ddi_acc_handle_t power_rhandle; /* power button register handle */
    uint8_t     *power_btn_reg; /* power button register address */
    uint8_t     power_btn_bit;  /* power button register bit */
    boolean_t   power_regs_mapped; /* flag to tell if regs mapped */
    boolean_t   power_btn_ioctl; /* flag to specify ioctl request */
#endif
};

#ifdef  ACPI_POWER_BUTTON
static int power_attach_acpi(struct power_soft_state *softsp);
static void power_detach_acpi(struct power_soft_state *softsp);
static UINT32 power_acpi_fixed_event(void *ctx);
#else
static int power_setup_regs(struct power_soft_state *softsp);
static void power_free_regs(struct power_soft_state *softsp);
#endif  /* ACPI_POWER_BUTTON */

/*
 * Configuration data structures
 */
static struct cb_ops power_cb_ops = {
    power_open,     /* open */
    power_close,        /* close */
    nodev,          /* strategy */
    nodev,          /* print */
    nodev,          /* dump */
    nodev,          /* read */
    nodev,          /* write */
    power_ioctl,        /* ioctl */
    nodev,          /* devmap */
    nodev,          /* mmap */
    nodev,          /* segmap */
    power_chpoll,       /* poll */
    ddi_prop_op,        /* cb_prop_op */
    NULL,           /* streamtab */
    D_MP | D_NEW,       /* Driver compatibility flag */
    CB_REV,         /* rev */
    nodev,          /* cb_aread */
    nodev           /* cb_awrite */
};

static struct dev_ops power_ops = {
    DEVO_REV,       /* devo_rev, */
    0,          /* refcnt */
    power_getinfo,      /* getinfo */
    nulldev,        /* identify */
    nulldev,        /* probe */
    power_attach,       /* attach */
    power_detach,       /* detach */
    nodev,          /* reset */
    &power_cb_ops,      /* cb_ops */
    (struct bus_ops *)NULL, /* bus_ops */
    NULL            /* power */
};

static struct modldrv modldrv = {
    &mod_driverops,     /* Type of module.  This one is a driver */
    "power button driver v%I%", /* name of module */
    &power_ops,     /* driver ops */
};

static struct modlinkage modlinkage = {
    MODREV_1,
    (void *)&modldrv,
    NULL
};

/*
 * These are the module initialization routines.
 */

int
_init(void)
{
    int error;

    if ((error = ddi_soft_state_init(&power_state,
        sizeof (struct power_soft_state), 0)) != 0)
        return (error);

    if ((error = mod_install(&modlinkage)) != 0)
        ddi_soft_state_fini(&power_state);

    return (error);
}

int
_fini(void)
{
    int error;

    if ((error = mod_remove(&modlinkage)) == 0)
        ddi_soft_state_fini(&power_state);

    return (error);
}

int
_info(struct modinfo *modinfop)
{
    return (mod_info(&modlinkage, modinfop));
}

/*ARGSUSED*/
static int
power_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
    void **result)
{
    struct power_soft_state *softsp;

    if (power_inst == -1)
        return (DDI_FAILURE);

    switch (infocmd) {
    case DDI_INFO_DEVT2DEVINFO:
        if ((softsp = ddi_get_soft_state(power_state, power_inst))
            == NULL)
            return (DDI_FAILURE);
        *result = (void *)softsp->dip;
        return (DDI_SUCCESS);

    case DDI_INFO_DEVT2INSTANCE:
        *result = (void *)(uintptr_t)power_inst;
        return (DDI_SUCCESS);

    default:
        return (DDI_FAILURE);
    }
}

static int
power_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
    struct power_soft_state *softsp;

    switch (cmd) {
    case DDI_ATTACH:
        break;
    case DDI_RESUME:
        return (DDI_SUCCESS);
    default:
        return (DDI_FAILURE);
    }

    /*
     * If the power node doesn't have "button" property, quietly
     * fail to attach.
     */
    if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
        "button") == 0)
        return (DDI_FAILURE);

    if (power_inst != -1)
        return (DDI_FAILURE);

    power_inst = ddi_get_instance(dip);

    if (ddi_soft_state_zalloc(power_state, power_inst) != DDI_SUCCESS)
        return (DDI_FAILURE);

    if (ddi_create_minor_node(dip, "power_button", S_IFCHR,
        (power_inst << 8) + 0, "ddi_power_button", 0) != DDI_SUCCESS)
        return (DDI_FAILURE);

    softsp = ddi_get_soft_state(power_state, power_inst);
    softsp->dip = dip;

#ifdef  ACPI_POWER_BUTTON
    (void) power_attach_acpi(softsp);
#else
    if (power_setup_regs(softsp) != DDI_SUCCESS) {
        cmn_err(CE_WARN, "power_attach: failed to setup registers");
        goto error;
    }

    if (ddi_get_iblock_cookie(dip, 0,
        &softsp->high_iblock_cookie) != DDI_SUCCESS) {
        cmn_err(CE_WARN, "power_attach: ddi_get_soft_iblock_cookie "
            "failed.");
        goto error;
    }
    mutex_init(&softsp->power_intr_mutex, NULL, MUTEX_DRIVER,
        softsp->high_iblock_cookie);

    if (ddi_add_intr(dip, 0, &softsp->high_iblock_cookie, NULL,
        power_high_intr, (caddr_t)softsp) != DDI_SUCCESS) {
        cmn_err(CE_WARN, "power_attach: failed to add high-level "
            " interrupt handler.");
        mutex_destroy(&softsp->power_intr_mutex);
        goto error;
    }
#endif  /* ACPI_POWER_BUTTON */

    if (ddi_get_soft_iblock_cookie(dip, DDI_SOFTINT_LOW,
        &softsp->soft_iblock_cookie) != DDI_SUCCESS) {
        cmn_err(CE_WARN, "power_attach: ddi_get_soft_iblock_cookie "
            "failed.");
        mutex_destroy(&softsp->power_intr_mutex);
        ddi_remove_intr(dip, 0, NULL);
        goto error;
    }

    mutex_init(&softsp->power_mutex, NULL, MUTEX_DRIVER,
        (void *)softsp->soft_iblock_cookie);

    if (ddi_add_softintr(dip, DDI_SOFTINT_LOW, &softsp->softintr_id,
        NULL, NULL, power_soft_intr, (caddr_t)softsp) != DDI_SUCCESS) {
        cmn_err(CE_WARN, "power_attach: failed to add soft "
            "interrupt handler.");
        mutex_destroy(&softsp->power_mutex);
        mutex_destroy(&softsp->power_intr_mutex);
        ddi_remove_intr(dip, 0, NULL);
        goto error;
    }

    ddi_report_dev(dip);

    return (DDI_SUCCESS);

error:
#ifdef  ACPI_POWER_BUTTON
    /*
     * detach ACPI power button
     */
    power_detach_acpi(softsp);
#else
    power_free_regs(softsp);
#endif  /* ACPI_POWER_BUTTON */
    ddi_remove_minor_node(dip, "power_button");
    ddi_soft_state_free(power_state, power_inst);
    return (DDI_FAILURE);
}

/*ARGSUSED*/
/*
 * This driver doesn't detach.
 */
static int
power_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
    /*
     * Since the "power" node has "reg" property, as part of
     * the suspend operation, detach(9E) entry point is called.
     * There is no state to save, since this register is used
     * by OBP to power off the system and the state of the
     * power off is preserved by hardware.
     */
    return ((cmd == DDI_SUSPEND) ? DDI_SUCCESS :
        DDI_FAILURE);
}

#ifndef ACPI_POWER_BUTTON
/*
 * Handler for the high-level interrupt.
 */
static uint_t
power_high_intr(caddr_t arg)
{
    struct power_soft_state *softsp = (struct power_soft_state *)arg;
    ddi_acc_handle_t hdl = softsp->power_rhandle;
    uint8_t     reg;

    hrtime_t tstamp;
    static hrtime_t o_tstamp = 0;
    static hrtime_t power_button_tstamp = 0;
    static int power_button_cnt;

    if (softsp->power_regs_mapped) {
        mutex_enter(&softsp->power_intr_mutex);
        reg = ddi_get8(hdl, softsp->power_btn_reg);
        if (reg & softsp->power_btn_bit) {
            reg &= softsp->power_btn_bit;
            ddi_put8(hdl, softsp->power_btn_reg, reg);
            (void) ddi_get8(hdl, softsp->power_btn_reg);
        } else {
            if (!softsp->power_btn_ioctl) {
                mutex_exit(&softsp->power_intr_mutex);
                return (DDI_INTR_CLAIMED);
            }
            softsp->power_btn_ioctl = B_FALSE;
        }
        mutex_exit(&softsp->power_intr_mutex);
    }

    tstamp = gethrtime();

    /* need to deal with power button debounce */
    if (o_tstamp && (tstamp - o_tstamp) < power_button_debounce) {
        o_tstamp = tstamp;
        return (DDI_INTR_CLAIMED);
    }
    o_tstamp = tstamp;

    power_button_cnt++;

    mutex_enter(&softsp->power_intr_mutex);
    power_button_pressed++;
    mutex_exit(&softsp->power_intr_mutex);

    /*
     * If power button abort is enabled and power button was pressed
     * power_button_abort_presses times within power_button_abort_interval
     * then call abort_sequence_enter();
     */
    if (power_button_abort_enable) {
        if (power_button_abort_presses == 1 ||
            tstamp < (power_button_tstamp +
            power_button_abort_interval)) {
            if (power_button_cnt == power_button_abort_presses) {
                mutex_enter(&softsp->power_intr_mutex);
                power_button_cancel += power_button_timeouts;
                power_button_pressed = 0;
                mutex_exit(&softsp->power_intr_mutex);
                power_button_cnt = 0;
                abort_sequence_enter("Power Button Abort");
                return (DDI_INTR_CLAIMED);
            }
        } else {
            power_button_cnt = 1;
            power_button_tstamp = tstamp;
        }
    }

    if (!power_button_enable)
        return (DDI_INTR_CLAIMED);

    /* post softint to issue timeout for power button action */
    if (softsp->softintr_id != NULL)
        ddi_trigger_softintr(softsp->softintr_id);

    return (DDI_INTR_CLAIMED);
}
#endif  /* ifndef ACPI_POWER_BUTTON */

/*
 * Handle the softints....
 *
 * If only one softint is posted for several button presses, record
 * the number of additional presses just incase this was actually not quite
 * an Abort sequence so that we can log this event later.
 *
 * Issue a timeout with a duration being a fraction larger than
 * the specified Abort interval inorder to perform a power down if required.
 */
static uint_t
power_soft_intr(caddr_t arg)
{
    struct power_soft_state *softsp = (struct power_soft_state *)arg;

    if (!power_button_abort_enable)
        return (power_issue_shutdown(arg));

    mutex_enter(&softsp->power_intr_mutex);
    if (!power_button_pressed) {
        mutex_exit(&softsp->power_intr_mutex);
        return (DDI_INTR_CLAIMED);
    }

    /*
     * Schedule a timeout to do the necessary
     * work for shutdown, only one timeout for
     * n presses if power button was pressed
     * more than once before softint fired
     */
    if (power_button_pressed > 1)
        additional_presses += power_button_pressed - 1;

    timeout_cancel = 0;
    power_button_pressed = 0;
    power_button_timeouts++;
    mutex_exit(&softsp->power_intr_mutex);
    (void) timeout((void(*)(void *))power_timeout,
        softsp, NSEC_TO_TICK(power_button_abort_interval) +
        ABORT_INCREMENT_DELAY);

    return (DDI_INTR_CLAIMED);
}

/*
 * Upon receiving a timeout the following is determined:
 *
 * If an  Abort sequence was issued, then we cancel all outstanding timeouts
 * and additional presses prior to the Abort sequence.
 *
 * If we had multiple timeouts issued and the abort sequence was not met,
 * then we had more than one button press to power down the machine. We
 * were probably trying to issue an abort. So log a message indicating this
 * and cancel all outstanding timeouts.
 *
 * If we had just one timeout and the abort sequence was not met then
 * we really did want to power down the machine, so call power_issue_shutdown()
 * to do the work and schedule a power down
 */
static void
power_timeout(caddr_t arg)
{
    struct power_soft_state *softsp = (struct power_soft_state *)arg;
    static int first = 0;

    /*
     * Abort was generated cancel all outstanding power
     * button timeouts
     */
    mutex_enter(&softsp->power_intr_mutex);
    if (power_button_cancel) {
        power_button_cancel--;
        power_button_timeouts--;
        if (!first) {
            first++;
            additional_presses = 0;
        }
        mutex_exit(&softsp->power_intr_mutex);
        return;
    }
    first = 0;

    /*
     * We get here if the timeout(s) have fired and they were
     * not issued prior to an abort.
     *
     * If we had more than one press in the interval we were
     * probably trying to issue an abort, but didnt press the
     * required number within the interval. Hence cancel all
     * timeouts and do not continue towards shutdown.
     */
    if (!timeout_cancel) {
        timeout_cancel = power_button_timeouts +
            additional_presses;

        power_button_timeouts--;
        if (!power_button_timeouts)
            additional_presses = 0;

        if (timeout_cancel > 1) {
            mutex_exit(&softsp->power_intr_mutex);
            cmn_err(CE_NOTE, "Power Button pressed "
                "%d times, cancelling all requests",
                timeout_cancel);
            return;
        }
        mutex_exit(&softsp->power_intr_mutex);

        /* Go and do the work to request shutdown */
        (void) power_issue_shutdown((caddr_t)softsp);
        return;
    }

    power_button_timeouts--;
    if (!power_button_timeouts)
        additional_presses = 0;
    mutex_exit(&softsp->power_intr_mutex);
}

#ifdef ACPI_POWER_BUTTON
static void
do_shutdown(void)
{
    proc_t *initpp;

    /*
     * If we're still booting and init(1) isn't set up yet, simply halt.
     */
    mutex_enter(&pidlock);
    initpp = prfind(P_INITPID);
    mutex_exit(&pidlock);
    if (initpp == NULL) {
        extern void halt(char *);
        halt("Power off the System");   /* just in case */
    }

    /*
     * else, graceful shutdown with inittab and all getting involved
     */
    psignal(initpp, SIGPWR);
}
#endif

static uint_t
power_issue_shutdown(caddr_t arg)
{
    struct power_soft_state *softsp = (struct power_soft_state *)arg;

    mutex_enter(&softsp->power_mutex);
    softsp->events |= PB_BUTTON_PRESS;
    if (softsp->monitor_on != 0) {
        mutex_exit(&softsp->power_mutex);
        pollwakeup(&softsp->pollhd, POLLRDNORM);
        pollwakeup(&softsp->pollhd, POLLIN);
        return (DDI_INTR_CLAIMED);
    }

    if (!softsp->shutdown_pending) {
        cmn_err(CE_WARN, "Power off requested from power button or "
            "SC, powering down the system!");
        softsp->shutdown_pending = 1;
        do_shutdown();

        /*
         * Wait a while for "do_shutdown()" to shut down the system
         * before logging an error message.
         */
        (void) timeout((void(*)(void *))power_log_message, NULL,
            100 * hz);
    }
    mutex_exit(&softsp->power_mutex);

    return (DDI_INTR_CLAIMED);
}

/*
 * Open the device.
 */
/*ARGSUSED*/
static int
power_open(dev_t *devp, int openflags, int otyp, cred_t *credp)
{
    struct power_soft_state *softsp;
    int clone;

    if (otyp != OTYP_CHR)
        return (EINVAL);

    if ((softsp = ddi_get_soft_state(power_state, power_inst)) ==
        NULL)
        return (ENXIO);

    mutex_enter(&softsp->power_mutex);
    for (clone = 1; clone < POWER_MAX_CLONE; clone++)
        if (!softsp->clones[clone])
            break;

    if (clone == POWER_MAX_CLONE) {
        cmn_err(CE_WARN, "power_open: No more allocation left "
            "to create a clone minor.");
        mutex_exit(&softsp->power_mutex);
        return (ENXIO);
    }

    *devp = makedevice(getmajor(*devp), (power_inst << 8) + clone);
    softsp->clones[clone] = 1;
    mutex_exit(&softsp->power_mutex);

    return (0);
}

/*
 * Close the device.
 */
/*ARGSUSED*/
static  int
power_close(dev_t dev, int openflags, int otyp, cred_t *credp)
{
    struct power_soft_state *softsp;
    int clone;

    if (otyp != OTYP_CHR)
        return (EINVAL);

    if ((softsp = ddi_get_soft_state(power_state, power_inst)) ==
        NULL)
        return (ENXIO);

    clone = POWER_MINOR_TO_CLONE(getminor(dev));
    mutex_enter(&softsp->power_mutex);
    if (softsp->monitor_on == clone)
        softsp->monitor_on = 0;
    softsp->clones[clone] = 0;
    mutex_exit(&softsp->power_mutex);

    return (0);
}

/*ARGSUSED*/
static  int
power_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *cred_p,
    int *rval_p)
{
    struct power_soft_state *softsp;
    int clone;

    if ((softsp = ddi_get_soft_state(power_state, power_inst)) ==
        NULL)
        return (ENXIO);

    clone = POWER_MINOR_TO_CLONE(getminor(dev));
    switch (cmd) {
    case PB_BEGIN_MONITOR:
        mutex_enter(&softsp->power_mutex);
        if (softsp->monitor_on) {
            mutex_exit(&softsp->power_mutex);
            return (EBUSY);
        }
        softsp->monitor_on = clone;
        mutex_exit(&softsp->power_mutex);
        return (0);

    case PB_END_MONITOR:
        mutex_enter(&softsp->power_mutex);

        /*
         * If PB_END_MONITOR is called without first
         * calling PB_BEGIN_MONITOR, an error will be
         * returned.
         */
        if (!softsp->monitor_on) {
            mutex_exit(&softsp->power_mutex);
            return (ENXIO);
        }

        /*
         * This clone is not monitoring the button.
         */
        if (softsp->monitor_on != clone) {
            mutex_exit(&softsp->power_mutex);
            return (EINVAL);
        }
        softsp->monitor_on = 0;
        mutex_exit(&softsp->power_mutex);
        return (0);

    case PB_GET_EVENTS:
        mutex_enter(&softsp->power_mutex);
        if (ddi_copyout((void *)&softsp->events, (void *)arg,
            sizeof (int), mode) != 0) {
            mutex_exit(&softsp->power_mutex);
            return (EFAULT);
        }

        /*
         * This ioctl returned the events detected since last
         * call.  Note that any application can get the events
         * and clear the event register.
         */
        softsp->events = 0;
        mutex_exit(&softsp->power_mutex);
        return (0);

    /*
     * This ioctl is used by the test suite.
     */
    case PB_CREATE_BUTTON_EVENT:
#ifdef  ACPI_POWER_BUTTON
        (UINT32)power_acpi_fixed_event((void *)softsp);
#else
        if (softsp->power_regs_mapped) {
            mutex_enter(&softsp->power_intr_mutex);
            softsp->power_btn_ioctl = B_TRUE;
            mutex_exit(&softsp->power_intr_mutex);
        }
        (void) power_high_intr((caddr_t)softsp);
#endif  /* ACPI_POWER_BUTTON */
        return (0);

    default:
        return (ENOTTY);
    }
}

/*ARGSUSED*/
static int
power_chpoll(dev_t dev, short events, int anyyet,
    short *reventsp, struct pollhead **phpp)
{
    struct power_soft_state *softsp;

    if ((softsp = ddi_get_soft_state(power_state, power_inst)) == NULL)
        return (ENXIO);

    mutex_enter(&softsp->power_mutex);
    *reventsp = 0;
    if (softsp->events)
        *reventsp = POLLRDNORM|POLLIN;
    else {
        if (!anyyet)
            *phpp = &softsp->pollhd;
    }
    mutex_exit(&softsp->power_mutex);

    return (0);
}

static void
power_log_message(void)
{
    struct power_soft_state *softsp;

    if ((softsp = ddi_get_soft_state(power_state, power_inst)) == NULL) {
        cmn_err(CE_WARN, "Failed to get internal state!");
        return;
    }

    mutex_enter(&softsp->power_mutex);
    softsp->shutdown_pending = 0;
    cmn_err(CE_WARN, "Failed to shut down the system!");
    mutex_exit(&softsp->power_mutex);
}

#ifdef  ACPI_POWER_BUTTON
/*
 * Given a handle to a device object, locate a _PRW object
 * if present and fetch the GPE info for this device object
 */
static ACPI_STATUS
power_get_prw_gpe(ACPI_HANDLE dev, ACPI_HANDLE *gpe_dev, UINT32 *gpe_num)
{
    ACPI_BUFFER buf;
    ACPI_STATUS status;
    ACPI_HANDLE prw;
    ACPI_OBJECT *gpe;

    /*
     * Evaluate _PRW if present
     */
    status = AcpiGetHandle(dev, "_PRW", &prw);
    if (status != AE_OK)
        return (status);
    buf.Length = ACPI_ALLOCATE_BUFFER;
    status = AcpiEvaluateObjectTyped(prw, NULL, NULL, &buf,
        ACPI_TYPE_PACKAGE);
    if (status != AE_OK)
        return (status);

    /*
     * Sanity-check the package; need at least two elements
     */
    status = AE_ERROR;
    if (((ACPI_OBJECT *)buf.Pointer)->Package.Count < 2)
        goto done;

    gpe = &((ACPI_OBJECT *)buf.Pointer)->Package.Elements[0];
    if (gpe->Type == ACPI_TYPE_INTEGER) {
        *gpe_dev = NULL;
        *gpe_num = gpe->Integer.Value;
        status = AE_OK;
    } else if (gpe->Type == ACPI_TYPE_PACKAGE) {
        if ((gpe->Package.Count != 2) ||
            (gpe->Package.Elements[0].Type != ACPI_TYPE_DEVICE) ||
            (gpe->Package.Elements[1].Type != ACPI_TYPE_INTEGER))
            goto done;
        *gpe_dev = gpe->Package.Elements[0].Reference.Handle;
        *gpe_num = gpe->Package.Elements[1].Integer.Value;
        status = AE_OK;
    }

done:
    AcpiOsFree(buf.Pointer);
    return (status);
}


/*
 *
 */
/*ARGSUSED*/
static ACPI_STATUS
acpi_device(ACPI_HANDLE obj, UINT32 nesting, void *context, void **rv)
{

    *((ACPI_HANDLE *)context) = obj;
    return (AE_OK);
}

/*
 *
 */
static ACPI_HANDLE
probe_acpi_pwrbutton()
{
    ACPI_HANDLE obj = NULL;

    (void) AcpiGetDevices("PNP0C0C", acpi_device, (void *)&obj, NULL);
    return (obj);
}

static UINT32
power_acpi_fixed_event(void *ctx)
{

    mutex_enter(&((struct power_soft_state *)ctx)->power_intr_mutex);
    power_button_pressed++;
    mutex_exit(&((struct power_soft_state *)ctx)->power_intr_mutex);

    /* post softint to issue timeout for power button action */
    if (((struct power_soft_state *)ctx)->softintr_id != NULL)
        ddi_trigger_softintr(
            ((struct power_soft_state *)ctx)->softintr_id);

    return (AE_OK);
}

/*ARGSUSED*/
static void
power_acpi_notify_event(ACPI_HANDLE obj, UINT32 val, void *ctx)
{
    if (val == 0x80)
        (void) power_acpi_fixed_event(ctx);
}

/*
 *
 */
static int
power_probe_method_button(struct power_soft_state *softsp)
{
    ACPI_HANDLE button_obj;
    UINT32 gpe_num;
    ACPI_HANDLE gpe_dev;

    button_obj = probe_acpi_pwrbutton();
    softsp->button_obj = button_obj;    /* remember obj */
    if ((button_obj != NULL) &&
        (power_get_prw_gpe(button_obj, &gpe_dev, &gpe_num) == AE_OK) &&
        (AcpiSetGpeType(gpe_dev, gpe_num, ACPI_GPE_TYPE_WAKE_RUN) ==
        AE_OK) &&
        (AcpiEnableGpe(gpe_dev, gpe_num, ACPI_NOT_ISR) == AE_OK) &&
        (AcpiInstallNotifyHandler(button_obj, ACPI_DEVICE_NOTIFY,
        power_acpi_notify_event, (void*)softsp) == AE_OK))
        return (1);
    return (0);
}

/*
 *
 */
static int
power_probe_fixed_button(struct power_soft_state *softsp)
{
    FADT_DESCRIPTOR *fadt;

    if (AcpiGetFirmwareTable(FADT_SIG, 1, ACPI_LOGICAL_ADDRESSING,
        (ACPI_TABLE_HEADER **) &fadt) != AE_OK)
        return (0);

    if (!fadt->PwrButton) {
        if (AcpiInstallFixedEventHandler(ACPI_EVENT_POWER_BUTTON,
            power_acpi_fixed_event, (void *)softsp) == AE_OK)
            return (1);
    }
    return (0);
}


/*
 *
 */
static int
power_attach_acpi(struct power_soft_state *softsp)
{

    /*
     * If we've attached anything already, return an error
     */
    if ((softsp->gpe_attached) || (softsp->fixed_attached))
        return (DDI_FAILURE);

    /*
     * attempt to attach both a fixed-event handler and a GPE
     * handler; remember what we got
     */
    softsp->fixed_attached = (power_probe_fixed_button(softsp) != 0);
    softsp->gpe_attached = (power_probe_method_button(softsp) != 0);

    /*
     * If we've attached anything now, return success
     */
    if ((softsp->gpe_attached) || (softsp->fixed_attached))
        return (DDI_SUCCESS);

    return (DDI_FAILURE);
}

/*
 *
 */
static void
power_detach_acpi(struct power_soft_state *softsp)
{
    if (softsp->gpe_attached) {
        if (AcpiRemoveNotifyHandler(softsp->button_obj,
            ACPI_DEVICE_NOTIFY, power_acpi_notify_event) != AE_OK)
            cmn_err(CE_WARN, "!power: failed to remove Notify"
                " handler");
    }

    if (softsp->fixed_attached) {
        if (AcpiRemoveFixedEventHandler(ACPI_EVENT_POWER_BUTTON,
            power_acpi_fixed_event) != AE_OK)
            cmn_err(CE_WARN, "!power: failed to remove Power"
                " Button handler");
    }
}

#else
/*
 * power button register definitions for acpi register on m1535d
 */
#define M1535D_PWR_BTN_REG_01       0x1
#define M1535D_PWR_BTN_EVENT_FLAG   0x1

static int
power_setup_m1535_regs(dev_info_t *dip, struct power_soft_state *softsp)
{
    ddi_device_acc_attr_t   attr;
    uint8_t *reg_base;

    attr.devacc_attr_version = DDI_DEVICE_ATTR_V0;
    attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC;
    attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC;
    if (ddi_regs_map_setup(dip, 0, (caddr_t *)&reg_base, 0, 0, &attr,
        &softsp->power_rhandle) != DDI_SUCCESS) {
        return (DDI_FAILURE);
    }
    softsp->power_btn_reg = &reg_base[M1535D_PWR_BTN_REG_01];
    softsp->power_btn_bit = M1535D_PWR_BTN_EVENT_FLAG;
    softsp->power_regs_mapped = B_TRUE;
    return (DDI_SUCCESS);
}

/*
 * Setup register map for the power button
 * NOTE:- we only map registers for platforms
 * binding with the ali1535d+-power compatible
 * property.
 */
static int
power_setup_regs(struct power_soft_state *softsp)
{
    char    *binding_name;

    softsp->power_regs_mapped = B_FALSE;
    softsp->power_btn_ioctl = B_FALSE;
    binding_name = ddi_binding_name(softsp->dip);
    if (strcmp(binding_name, "ali1535d+-power") == 0)
        return (power_setup_m1535_regs(softsp->dip, softsp));

    return (DDI_SUCCESS);
}

static void
power_free_regs(struct power_soft_state *softsp)
{
    if (softsp->power_regs_mapped)
        ddi_regs_map_free(&softsp->power_rhandle);
}
#endif  /* ACPI_POWER_BUTTON */