common/io/i8042.c

	i8042.c revision fbac63660cc7a6ccfe2042916ea594ac07d63fcb
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#include <sys/types.h>
#include <sys/ddi.h>
#include <sys/inline.h>
#include <sys/conf.h>
#include <sys/sunddi.h>
#include <sys/sunndi.h>
#include <sys/i8042.h>
#include <sys/kmem.h>
#include <sys/promif.h> /* for prom_printf */
#include <sys/note.h>

/*
 * Note: For x86, this driver is used to create keyboard/mouse nodes when
 * booting with ACPI enumeration turned off (acpi-enum=off).
 */

/*
 * Unfortunately, soft interrupts are implemented poorly.  Each additional
 * soft interrupt user impacts the performance of all existing soft interrupt
 * users.  This is not the case on SPARC, however.
 */
#ifdef __sparc
#define USE_SOFT_INTRS
#else
#undef  USE_SOFT_INTRS
#endif

/*
 * The command bytes are different for x86 and for SPARC because on x86,
 * all modern 8042s can properly translate scan code set 2 codes to
 * scan code set 1.  On SPARC systems that have 8042s (e.g. Tadpole laptops),
 * setting the "translation" bit in the command byte has no effect.
 * This is potentially dangerous if, in the future, new SPARC systems uses 8042s
 * that implement the scan code translation when the translation bit is set.
 *
 * On SPARC, kb8042 will attempt to detect which scan code set the keyboard
 * is using.  In order for that code to work, the real scan code set must be the
 * set that is returned by the keyboard (and not a different set that is
 * translated by the 8042). (e.g. If the translation bit were enabled here,
 * and the keyboard returned scan code set 2 when kb8042 queried it, kb8042
 * would not be able to know with certainty that the scan codes it will receive
 * are set 2 scancodes, or set 1 translations made by the 8042).
 */

/*
 * 8042 Command Byte Layout:
 *
 * 0x80:  0   = Reserved, must be zero.
 * 0x40:  1   = Translate to XT codes. (0=No translation)
 * 0x20:  1   = Disable aux (mouse) port. (0=Enable port)
 * 0x10:  1   = Disable main (keyboard) port. (0=Enable port)
 * 0x08:  0   = Reserved, must be zero.
 * 0x04:  1   = System flag, 1 means passed self-test.
 *      Caution:  setting this bit to zero causes some
 *      systems (HP Kayak XA) to fail to reboot without
 *      a hard reset.
 * 0x02:  0   = Disable aux port interrupts. (1=Enable aux port interrupts)
 * 0x01:  0   = Disable main port interrupts. (1=Enable main port interrupts)
 *
 */
#if defined(__sparc)
#define I8042_CMD_DISABLE_ALL   0x34
#define I8042_CMD_ENABLE_ALL    0x07
#elif defined(__i386) || defined(__amd64)
#define I8042_CMD_DISABLE_ALL   0x74
#define I8042_CMD_ENABLE_ALL    0x47
#endif

#define BUFSIZ  64

/*
 * Child nodes, used to determine which to create at bus_config time
 */
#define I8042_KEYBOARD 2
#define I8042_MOUSE 1

enum i8042_ports {
    MAIN_PORT = 0,
    AUX_PORT
};

#define NUM_PORTS   2

/*
 * Only register at most MAX_INTERRUPTS interrupt handlers,
 * regardless of the number of interrupts in the prom node.
 * This is important, as registering for all interrupts on
 * some systems (e.g. Tadpole laptops) results in a flood
 * of spurious interrupts (for Tadpole, the first 2 interrupts
 * are for the keyboard and mouse, respectively, and the
 * third is for a proprietary device that is also accessed
 * via the same I/O addresses.)
 */
#define MAX_INTERRUPTS  2

/*
 * One of these for each port - main (keyboard) and aux (mouse).
 */
struct i8042_port {
    boolean_t       initialized;
    dev_info_t      *dip;
    int         inumber;
    enum i8042_ports    which;      /* main or aux port */
#if defined(USE_SOFT_INTRS)
    ddi_softint_handle_t    soft_hdl;
    boolean_t       soft_intr_enabled;
#else
    kmutex_t        intr_mutex;
#endif
    uint_t          (*intr_func)(caddr_t arg1, caddr_t arg2);
    caddr_t         intr_arg1;
    caddr_t         intr_arg2;
    struct i8042        *i8042_global;
    /*
     * wptr is next byte to write
     */
    int         wptr;
    /*
     * rptr is next byte to read, == wptr means empty
     * NB:  At full, one byte is unused.
     */
    int         rptr;
    int         overruns;
    unsigned char       buf[BUFSIZ];

    /*
     * Used during i8042_rep_put8 to intercept the 8042 response in
     * i8042_intr()
     */
    boolean_t       intercept_complete;
    boolean_t       intr_intercept_enabled;
    uint8_t         intercept[2];
    uint8_t         intercepted_byte;
    kcondvar_t      intercept_cv;
    kmutex_t        intercept_mutex;
};

/*
 * Describes entire 8042 device.
 */
struct i8042 {
    dev_info_t      *dip;
    struct i8042_port   i8042_ports[NUM_PORTS];
    kmutex_t        i8042_mutex;
    kmutex_t        i8042_out_mutex;
    boolean_t       initialized;
    ddi_acc_handle_t    io_handle;
    uint8_t         *io_addr;
    int         nintrs;
    ddi_iblock_cookie_t *iblock_cookies;
    uint_t          init_state;
/* Initialization states: */
#define I8042_INIT_BASIC        0x00000001
#define I8042_INIT_REGS_MAPPED      0x00000002
#define I8042_INIT_MUTEXES      0x00000004
#define I8042_INIT_INTRS_ENABLED    0x00000010
    uint_t          intrs_added;
#ifdef __sparc
    timeout_id_t        timeout_id;
#endif
#ifdef DEBUG
    /*
     * intr_thread is set to curthread in i8042_intr and is
     * tested against curthread in i8402_rep_put8().
     */
    kthread_t       *intr_thread;
#endif
    ddi_softint_handle_t    intercept_sih;
};

/*
 * i8042 hardware register definitions
 */

/*
 * These are I/O registers, relative to the device's base (normally 0x60).
 */
#define I8042_DATA  0x00    /* read/write data here */
#define I8042_STAT  0x04    /* read status here */
#define I8042_CMD   0x04    /* write commands here */

/*
 * These are bits in I8042_STAT.
 */
#define I8042_STAT_OUTBF    0x01    /* Output (to host) buffer full */
#define I8042_STAT_INBF     0x02    /* Input (from host) buffer full */
#define I8042_STAT_AUXBF    0x20    /* Output buffer data is from aux */

/*
 * These are commands to the i8042 itself (as distinct from the devices
 * attached to it).
 */
#define I8042_CMD_RCB       0x20    /* Read command byte (we don't use) */
#define I8042_CMD_WCB       0x60    /* Write command byte */
#define I8042_CMD_WRITE_AUX 0xD4    /* Send next data byte to aux port */

/*
 * Maximum number of times to loop while clearing pending data from the
 * keyboard controller.
 */
#define MAX_JUNK_ITERATIONS 1000

/*
 * Maximum time to wait for the keyboard to become ready to accept data
 * (maximum time = MAX_WAIT_ITERATIONS * USECS_PER_WAIT (default is 250ms))
 */
#define MAX_WAIT_ITERATIONS 25000
#define USECS_PER_WAIT      10


#ifdef __sparc

#define PLATFORM_MATCH(s) (strncmp(ddi_get_name(ddi_root_node()), \
    (s), strlen(s)) == 0)

/*
 * On some older SPARC platforms that have problems with the
 * interrupt line attached to the PS/2 keyboard/mouse, it
 * may be necessary to change the operating mode of the nexus
 * to a polling-based (instead of interrupt-based) method.
 * this variable is present to enable a worst-case workaround so
 * owners of these systems can still retain a working keyboard.
 *
 * The `i8042_polled_mode' variable can be used to force polled
 * mode for platforms that have this issue, but for which
 * automatic relief is not implemented.
 *
 * In the off chance that one of the platforms is misidentified
 * as requiried polling mode, `i8042_force_interrupt_mode' can
 * be set to force the nexus to use interrupts.
 */
#define I8042_MIN_POLL_INTERVAL 1000    /* usecs */
int i8042_poll_interval = 8000;     /* usecs */
int i8042_fast_poll_interval;       /* usecs */
int i8042_slow_poll_interval;       /* usecs */

boolean_t i8042_polled_mode = B_FALSE;
boolean_t i8042_force_interrupt_mode = B_FALSE;
#endif /* __sparc */

int max_wait_iterations = MAX_WAIT_ITERATIONS;

#ifdef DEBUG
int i8042_debug = 0;
#endif

/*
 * function prototypes for bus ops routines:
 */
static int i8042_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp,
    off_t offset, off_t len, caddr_t *addrp);
static int i8042_ctlops(dev_info_t *dip, dev_info_t *rdip,
    ddi_ctl_enum_t op, void *arg, void *result);

/*
 * function prototypes for dev ops routines:
 */
static int i8042_attach(dev_info_t *dip, ddi_attach_cmd_t cmd);
static int i8042_detach(dev_info_t *dip, ddi_detach_cmd_t cmd);
static  int i8042_intr_ops(dev_info_t *dip, dev_info_t *rdip,
    ddi_intr_op_t intr_op, ddi_intr_handle_impl_t *hdlp, void *result);
static int i8042_bus_config(dev_info_t *, uint_t, ddi_bus_config_op_t,
    void *, dev_info_t **);
static int i8042_bus_unconfig(dev_info_t *, uint_t,
    ddi_bus_config_op_t, void *);
#ifdef __sparc
static int i8042_build_interrupts_property(dev_info_t *dip);
static boolean_t i8042_is_polling_platform(void);
#endif

/*
 * bus ops and dev ops structures:
 */
static struct bus_ops i8042_bus_ops = {
    BUSO_REV,
    i8042_map,
    NULL,
    NULL,
    NULL,
    NULL,       /* ddi_map_fault */
    NULL,       /* ddi_dma_map */
    NULL,       /* ddi_dma_allochdl */
    NULL,       /* ddi_dma_freehdl */
    NULL,       /* ddi_dma_bindhdl */
    NULL,       /* ddi_dma_unbindhdl */
    NULL,       /* ddi_dma_flush */
    NULL,       /* ddi_dma_win */
    NULL,       /* ddi_dma_mctl */
    i8042_ctlops,
    ddi_bus_prop_op,
    NULL,           /* (*bus_get_eventcookie)();    */
    NULL,           /* (*bus_add_eventcall)();  */
    NULL,           /* (*bus_remove_eventcall)();   */
    NULL,           /* (*bus_post_event)();     */
    NULL,           /* bus_intr_ctl */
    i8042_bus_config,   /* bus_config */
    i8042_bus_unconfig, /* bus_unconfig */
    NULL,           /* bus_fm_init */
    NULL,           /* bus_fm_fini */
    NULL,           /* bus_fm_access_enter */
    NULL,           /* bus_fm_access_exit */
    NULL,           /* bus_power */
    i8042_intr_ops      /* bus_intr_op */
};

static struct dev_ops i8042_ops = {
    DEVO_REV,
    0,
    ddi_no_info,
    nulldev,
    0,
    i8042_attach,
    i8042_detach,
    nodev,
    (struct cb_ops *)0,
    &i8042_bus_ops,
    NULL,
    ddi_quiesce_not_needed,
};


/*
 * module definitions:
 */
#include <sys/modctl.h>
extern struct mod_ops mod_driverops;

static struct modldrv modldrv = {
    &mod_driverops,     /* Type of module.  This one is a driver */
    "i8042 nexus driver",   /* Name of module. */
    &i8042_ops,     /* driver ops */
};

static struct modlinkage modlinkage = {
    MODREV_1, (void *)&modldrv, NULL
};

int
_init(void)
{
    int e;

    /*
     * Install the module.
     */
    e = mod_install(&modlinkage);
    return (e);
}

int
_fini(void)
{
    int e;

    /*
     * Remove the module.
     */
    e = mod_remove(&modlinkage);
    if (e != 0)
        return (e);

    return (e);
}

int
_info(struct modinfo *modinfop)
{
    return (mod_info(&modlinkage, modinfop));
}

#define DRIVER_NAME(dip)    ddi_driver_name(dip)

static void i8042_timeout(void *arg);
static unsigned int i8042_intr(caddr_t arg);
static void i8042_write_command_byte(struct i8042 *, unsigned char);
static uint8_t i8042_get8(ddi_acc_impl_t *handlep, uint8_t *addr);
static void i8042_put8(ddi_acc_impl_t *handlep, uint8_t *addr,
    uint8_t value);
static void i8042_put8_nolock(ddi_acc_impl_t *handlep, uint8_t *addr,
    uint8_t value);
static void i8042_rep_put8(ddi_acc_impl_t *handlep, uint8_t *haddr,
    uint8_t *daddr, size_t repcount, uint_t flags);
static void i8042_send(struct i8042 *global, int reg, unsigned char cmd);
static uint_t i8042_intercept_softint(caddr_t arg1, caddr_t arg2);

unsigned int i8042_unclaimed_interrupts = 0;

static void
i8042_discard_junk_data(struct i8042 *global)
{
    /* Discard any junk data that may have been left around */
    for (;;) {
        unsigned char       stat;

        stat = ddi_get8(global->io_handle,
            global->io_addr + I8042_STAT);
        if (! (stat & I8042_STAT_OUTBF))
            break;
        (void) ddi_get8(global->io_handle,
            global->io_addr + I8042_DATA);

    }
}

static int
i8042_cleanup(struct i8042 *global)
{
    int which_port, i;
    struct i8042_port *port;

    ASSERT(global != NULL);

    if (global->initialized == B_TRUE) {
        /*
         * If any children still have regs mapped or interrupts
         * registered, return immediate failure (and do nothing).
         */
        mutex_enter(&global->i8042_mutex);

        for (which_port = 0; which_port < NUM_PORTS; which_port++) {
            port = &global->i8042_ports[which_port];

            if (port->initialized == B_TRUE) {
                mutex_exit(&global->i8042_mutex);
                return (DDI_FAILURE);
            }
#if defined(USE_SOFT_INTRS)
            if (port->soft_hdl != 0) {
                mutex_exit(&global->i8042_mutex);
                return (DDI_FAILURE);
            }
#else
            mutex_enter(&port->intr_mutex);
            if (port->intr_func != NULL) {
                mutex_exit(&port->intr_mutex);
                mutex_exit(&global->i8042_mutex);
                return (DDI_FAILURE);
            }
            mutex_exit(&port->intr_mutex);
#endif
        }
        global->initialized = B_FALSE;

        mutex_exit(&global->i8042_mutex);
    }

#ifdef __sparc
    /* If there may be an outstanding timeout, cancel it */
    if (global->timeout_id != 0) {
        (void) untimeout(global->timeout_id);
    }
#endif

    /* Stop the controller from generating interrupts */
    if (global->init_state & I8042_INIT_INTRS_ENABLED)
        i8042_write_command_byte(global, I8042_CMD_DISABLE_ALL);

    if (global->intrs_added) {
        /*
         * Remove the interrupts in the reverse order in
         * which they were added
         */
        for (i = global->nintrs - 1; i >= 0; i--) {
            if (global->intrs_added & (1 << i))
                ddi_remove_intr(global->dip, i,
                    global->iblock_cookies[i]);
        }
    }

    (void) ddi_intr_remove_softint(global->intercept_sih);


    if (global->init_state & I8042_INIT_MUTEXES) {
        for (which_port = 0; which_port < NUM_PORTS; which_port++) {
#ifndef USE_SOFT_INTRS
            port = &global->i8042_ports[which_port];
            mutex_destroy(&port->intr_mutex);
#endif
            mutex_destroy(&port->intercept_mutex);
            cv_destroy(&port->intercept_cv);
        }
        mutex_destroy(&global->i8042_out_mutex);
        mutex_destroy(&global->i8042_mutex);
    }

    if (global->init_state & I8042_INIT_REGS_MAPPED)
        ddi_regs_map_free(&global->io_handle);

    if (global->init_state & I8042_INIT_BASIC) {
        ddi_set_driver_private(global->dip, (caddr_t)NULL);
        if (global->nintrs > 0) {
            kmem_free(global->iblock_cookies, global->nintrs *
                sizeof (ddi_iblock_cookie_t));
        }
        kmem_free(global, sizeof (struct i8042));
    }

    return (DDI_SUCCESS);
}

#define OBF_WAIT_COUNT 1000 /* in granules of 10uS */

/*
 * Wait for the 8042 to fill the 'output' (from 8042 to host)
 * buffer.  If 8042 fails to fill the output buffer within an
 * allowed time, return 1 (which means there is no data available),
 * otherwise return 0
 */
static int
i8042_wait_obf(struct i8042 *global)
{
    int timer = 0;

    while (!(ddi_get8(global->io_handle, global->io_addr + I8042_STAT) &
        I8042_STAT_OUTBF)) {
        if (++timer > OBF_WAIT_COUNT)
            return (1);
        drv_usecwait(10);
    }
    return (0);
}

/*
 * Drain all queued bytes from the 8042.
 * Return 0 for no error, <> 0 if there was an error.
 */
static int
i8042_purge_outbuf(struct i8042 *global)
{
    int i;

    for (i = 0; i < MAX_JUNK_ITERATIONS; i++) {
        if (i8042_wait_obf(global))
            break;
        (void) ddi_get8(global->io_handle,
            global->io_addr + I8042_DATA);
    }

    /*
     * If we hit the maximum number of iterations, then there
     * was a serious problem (e.g. our hardware may not be
     * present or working properly).
     */
    return (i == MAX_JUNK_ITERATIONS);
}

static int
i8042_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
    struct i8042_port   *port;
    enum i8042_ports    which_port;
    int         i;
#if !defined(USE_SOFT_INTRS)
    ddi_iblock_cookie_t cookie;
#endif
    static ddi_device_acc_attr_t attr = {
        DDI_DEVICE_ATTR_V0,
        DDI_NEVERSWAP_ACC,
        DDI_STRICTORDER_ACC,
    };
    struct i8042 *global;
#ifdef __sparc
    int         interval;
#endif

    switch (cmd) {
    case DDI_RESUME:
        global = (struct i8042 *)ddi_get_driver_private(dip);
        i8042_discard_junk_data(global);
        i8042_write_command_byte(global, I8042_CMD_ENABLE_ALL);
        return (DDI_SUCCESS);

    case DDI_ATTACH:
        /* Handled in the main function block */
        break;

    default:
        return (DDI_FAILURE);
    }

    /*
     * DDI_ATTACH processing
     */

    global = (struct i8042 *)kmem_zalloc(sizeof (struct i8042), KM_SLEEP);
    ddi_set_driver_private(dip, (caddr_t)global);
    global->dip = dip;
    global->initialized = B_FALSE;

    global->init_state |= I8042_INIT_BASIC;

    if (ddi_regs_map_setup(dip, 0, (caddr_t *)&global->io_addr,
        (offset_t)0, (offset_t)0, &attr, &global->io_handle)
        != DDI_SUCCESS)
        goto fail;

    global->init_state |= I8042_INIT_REGS_MAPPED;

    /*
     * Get the number of interrupts for this nexus
     */
    if (ddi_dev_nintrs(dip, &global->nintrs) == DDI_FAILURE)
        goto fail;

#ifdef __sparc
    if ((i8042_polled_mode || i8042_is_polling_platform()) &&
        !i8042_force_interrupt_mode) {
        /*
         * If we're on a platform that has known
         * interrupt issues with the keyboard/mouse,
         * use polled mode.
         */
        i8042_polled_mode = B_TRUE;
        global->nintrs = 0;
    } else if (global->nintrs == 0) {
        /*
         * If there are no interrupts on the i8042 node,
         * we may be on a brain-dead platform that only
         * has interrupts properties on i8042's children
         * (e.g. some UltraII-based boards)
         * In this case, scan first-level children, and
         * build a list of interrupts that each child uses,
         * then create an `interrupts' property on the nexus node
         * that contains the interrupts used by all children
         */
        if (i8042_build_interrupts_property(dip) == DDI_FAILURE ||
            ddi_dev_nintrs(dip, &global->nintrs) == DDI_FAILURE ||
            global->nintrs == 0) {
            cmn_err(CE_WARN, "i8042#%d: No interrupts defined!",
                ddi_get_instance(global->dip));
            goto fail;
        }
    }
#else
    if (global->nintrs == 0) {
        cmn_err(CE_WARN, "i8042#%d: No interrupts defined!",
            ddi_get_instance(global->dip));
        goto fail;
    }
#endif

    if (global->nintrs > MAX_INTERRUPTS)
        global->nintrs = MAX_INTERRUPTS;

    if (global->nintrs > 0) {
        global->iblock_cookies = kmem_zalloc(global->nintrs *
            sizeof (ddi_iblock_cookie_t), KM_NOSLEEP);

        for (i = 0; i < global->nintrs; i++) {
            if (ddi_get_iblock_cookie(dip, i,
                &global->iblock_cookies[i]) != DDI_SUCCESS)
                goto fail;
        }
    } else
        global->iblock_cookies = NULL;

    mutex_init(&global->i8042_mutex, NULL, MUTEX_DRIVER,
        (global->nintrs > 0) ? global->iblock_cookies[0] : NULL);

    mutex_init(&global->i8042_out_mutex, NULL, MUTEX_DRIVER, NULL);

    for (which_port = 0; which_port < NUM_PORTS; ++which_port) {
        port = &global->i8042_ports[which_port];
        port->initialized = B_FALSE;
        port->i8042_global = global;
        port->which = which_port;
        port->intr_intercept_enabled = B_FALSE;
        cv_init(&port->intercept_cv, NULL, CV_DRIVER, NULL);
#if defined(USE_SOFT_INTRS)
        port->soft_hdl = 0;
#else

        mutex_init(&port->intercept_mutex, NULL, MUTEX_DRIVER,
            (void *)DDI_INTR_SOFTPRI_DEFAULT);

        /*
         * Assume that the interrupt block cookie for port <n>
         * is iblock_cookies[<n>] (a 1:1 mapping).  If there are not
         * enough interrupts to cover the number of ports, use
         * the cookie from interrupt 0.
         */
        if (global->nintrs > 0) {
            cookie = global->iblock_cookies[
                (which_port < global->nintrs) ? which_port : 0];

            mutex_init(&port->intr_mutex, NULL, MUTEX_DRIVER,
                cookie);

        } else {
            mutex_init(&port->intr_mutex, NULL, MUTEX_DRIVER, NULL);
            mutex_init(&port->intercept_mutex, NULL, MUTEX_DRIVER,
                NULL);
        }

#endif
    }

    global->init_state |= I8042_INIT_MUTEXES;

    /*
     * Disable input and interrupts from both the main and aux ports.
     *
     * It is difficult if not impossible to read the command byte in
     * a completely clean way.  Reading the command byte may cause
     * an interrupt, and there is no way to suppress interrupts without
     * writing the command byte.  On a PC we might rely on the fact
     * that IRQ 1 is disabled and guaranteed not shared, but on
     * other platforms the interrupt line might be shared and so
     * causing an interrupt could be bad.
     *
     * Since we can't read the command byte and update it, we
     * just set it to static values.
     */
    i8042_write_command_byte(global, I8042_CMD_DISABLE_ALL);

    global->init_state &= ~I8042_INIT_INTRS_ENABLED;

    /* Discard any junk data that may have been left around */
    if (i8042_purge_outbuf(global) != 0)
        goto fail;


    if (ddi_intr_add_softint(dip, &global->intercept_sih,
        DDI_INTR_SOFTPRI_DEFAULT, i8042_intercept_softint, global)
        != DDI_SUCCESS)
        goto fail;

    /*
     * Assume the number of interrupts is less that the number of
     * bits in the variable used to keep track of which interrupt
     * was added.
     */
    ASSERT(global->nintrs <= (sizeof (global->intrs_added) * NBBY));

    for (i = 0; i < global->nintrs; i++) {
        /*
         * The 8042 handles all interrupts, because all
         * device access goes through the same I/O addresses.
         */
        if (ddi_add_intr(dip, i,
            (ddi_iblock_cookie_t *)NULL,
            (ddi_idevice_cookie_t *)NULL,
            i8042_intr, (caddr_t)global) != DDI_SUCCESS)
            goto fail;

        global->intrs_added |= (1 << i);
    }

    global->initialized = B_TRUE;

    /*
     * Enable the main and aux data ports and interrupts
     */
    i8042_write_command_byte(global, I8042_CMD_ENABLE_ALL);
    global->init_state |= I8042_INIT_INTRS_ENABLED;

#ifdef __sparc
    if (i8042_polled_mode) {
        /*
         * Do not allow anyone to set the polling interval
         * to an interval more frequent than I8042_MIN_POLL_INTERVAL --
         * it could hose the system.
         */
        interval = i8042_poll_interval;
        if (interval < I8042_MIN_POLL_INTERVAL)
            interval = I8042_MIN_POLL_INTERVAL;
        i8042_fast_poll_interval = interval;
        i8042_slow_poll_interval = interval << 3;

        global->timeout_id = timeout(i8042_timeout, global,
            drv_usectohz(i8042_slow_poll_interval));
    }
#endif

    return (DDI_SUCCESS);

fail:
    /* cleanup will succeed because no children have attached yet */
    (void) i8042_cleanup(global);
    return (DDI_FAILURE);
}

/*ARGSUSED*/
static int
i8042_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
    struct i8042 *global = (struct i8042 *)ddi_get_driver_private(dip);

    ASSERT(global != NULL);

    switch (cmd) {
    case DDI_SUSPEND:
        /*
         * Do not disable the keyboard controller for x86 suspend, as
         * the keyboard can be used to bring the system out of
         * suspend.
         */
#ifdef __sparc
        /* Disable interrupts and controller devices before suspend */
        i8042_write_command_byte(global, I8042_CMD_DISABLE_ALL);
#endif
        return (DDI_SUCCESS);

    case DDI_DETACH:
        /* DETACH can only succeed if cleanup succeeds */
        return (i8042_cleanup(global));

    default:
        return (DDI_FAILURE);
    }
}

/*
 * The primary interface to us from our children is via virtual registers.
 * This is the entry point that allows our children to "map" these
 * virtual registers.
 */
static int
i8042_map(
    dev_info_t *dip,
    dev_info_t *rdip,
    ddi_map_req_t *mp,
    off_t offset,
    off_t len,
    caddr_t *addrp)
{
    struct i8042_port   *port;
    struct i8042        *global;
    enum i8042_ports    which_port;
    int         *iprop;
    unsigned int        iprop_len;
    int         rnumber;
    ddi_acc_hdl_t       *handle;
    ddi_acc_impl_t      *ap;

    global = ddi_get_driver_private(dip);

    switch (mp->map_type) {
    case DDI_MT_REGSPEC:
        which_port = *(int *)mp->map_obj.rp;
        break;

    case DDI_MT_RNUMBER:
        rnumber = mp->map_obj.rnumber;
        if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, rdip,
            DDI_PROP_DONTPASS, "reg", &iprop, &iprop_len) !=
            DDI_SUCCESS) {
#if defined(DEBUG)
            cmn_err(CE_WARN, "%s #%d:  Missing 'reg' on %s@%s",
                DRIVER_NAME(dip), ddi_get_instance(dip),
                ddi_node_name(rdip), ddi_get_name_addr(rdip));
#endif
            return (DDI_FAILURE);
        }
#if defined(DEBUG)
        if (iprop_len != 1) {
            cmn_err(CE_WARN, "%s #%d:  Malformed 'reg' on %s@%s",
                DRIVER_NAME(dip), ddi_get_instance(dip),
                ddi_node_name(rdip), ddi_get_name_addr(rdip));
            return (DDI_FAILURE);
        }
        if (rnumber < 0 || rnumber >= iprop_len) {
            cmn_err(CE_WARN, "%s #%d:  bad map request for %s@%s",
                DRIVER_NAME(dip), ddi_get_instance(dip),
                ddi_node_name(rdip), ddi_get_name_addr(rdip));
            return (DDI_FAILURE);
        }
#endif
        which_port = iprop[rnumber];
        ddi_prop_free((void *)iprop);
#if defined(DEBUG)
        if (which_port != MAIN_PORT && which_port != AUX_PORT) {
            cmn_err(CE_WARN,
                "%s #%d:  bad 'reg' value %d on %s@%s",
                DRIVER_NAME(dip), ddi_get_instance(dip),
                which_port,
                ddi_node_name(rdip), ddi_get_name_addr(rdip));
            return (DDI_FAILURE);
        }
#endif
        break;

    default:
#if defined(DEBUG)
        cmn_err(CE_WARN, "%s #%d:  unknown map type %d for %s@%s",
            DRIVER_NAME(dip), ddi_get_instance(dip),
            mp->map_type,
            ddi_node_name(rdip), ddi_get_name_addr(rdip));
#endif
        return (DDI_FAILURE);
    }

#if defined(DEBUG)
    if (offset != 0 || len != 0) {
        cmn_err(CE_WARN,
            "%s #%d:  partial mapping attempt for %s@%s ignored",
            DRIVER_NAME(dip), ddi_get_instance(dip),
            ddi_node_name(rdip), ddi_get_name_addr(rdip));
    }
#endif

    port = &global->i8042_ports[which_port];

    switch (mp->map_op) {
    case DDI_MO_MAP_LOCKED:
#if defined(USE_SOFT_INTRS)
        port->soft_intr_enabled = B_FALSE;
#else
        port->intr_func = NULL;
#endif
        port->wptr = 0;
        port->rptr = 0;
        port->dip = dip;
        port->inumber = 0;
        port->initialized = B_TRUE;

        handle = mp->map_handlep;
        handle->ah_bus_private = port;
        handle->ah_addr = 0;
        ap = (ddi_acc_impl_t *)handle->ah_platform_private;
        /*
         * Support get8, put8 and _rep_put8
         */
        ap->ahi_put8 = i8042_put8;
        ap->ahi_get8 = i8042_get8;
        ap->ahi_put16 = NULL;
        ap->ahi_get16 = NULL;
        ap->ahi_put32 = NULL;
        ap->ahi_get32 = NULL;
        ap->ahi_put64 = NULL;
        ap->ahi_get64 = NULL;
        ap->ahi_rep_put8 = i8042_rep_put8;
        ap->ahi_rep_get8 = NULL;
        ap->ahi_rep_put16 = NULL;
        ap->ahi_rep_get16 = NULL;
        ap->ahi_rep_put32 = NULL;
        ap->ahi_rep_get32 = NULL;
        ap->ahi_rep_put64 = NULL;
        ap->ahi_rep_get64 = NULL;
        *addrp = 0;
        return (DDI_SUCCESS);

    case DDI_MO_UNMAP:
        port->initialized = B_FALSE;
        return (DDI_SUCCESS);

    default:
        cmn_err(CE_WARN, "%s:  map operation %d not supported",
            DRIVER_NAME(dip), mp->map_op);
        return (DDI_FAILURE);
    }
}

#ifdef __sparc
static void
i8042_timeout(void *arg)
{
    struct i8042 *i8042_p = (struct i8042 *)arg;
    int interval;

    /*
     * Allow the polling speed to be changed on the fly --
     * catch it here and update the intervals used.
     */
    if (i8042_fast_poll_interval != i8042_poll_interval) {
        interval = i8042_poll_interval;
        if (interval < I8042_MIN_POLL_INTERVAL)
            interval = I8042_MIN_POLL_INTERVAL;
        i8042_fast_poll_interval = interval;
        i8042_slow_poll_interval = interval << 3;
    }

    /*
     * If the ISR returned true, start polling at a faster rate to
     * increate responsiveness.  Once the keyboard or mouse go idle,
     * the ISR will return UNCLAIMED, and we'll go back to the slower
     * polling rate.  This gives some positive hysteresis (but not
     * negative, since we go back to the slower polling interval after
     * only one UNCLAIMED).  This has shown to be responsive enough,
     * even for fast typers.
     */
    interval = (i8042_intr((caddr_t)i8042_p) == DDI_INTR_CLAIMED) ?
        i8042_fast_poll_interval : i8042_slow_poll_interval;

    if (i8042_polled_mode)
        i8042_p->timeout_id = timeout(i8042_timeout, arg,
            drv_usectohz(interval));
    else
        i8042_p->timeout_id = 0;
}
#endif

/*
 * i8042 hardware interrupt routine.  Called for both main and aux port
 * interrupts.
 */
static unsigned int
i8042_intr(caddr_t arg)
{
    struct i8042        *global = (struct i8042 *)arg;
    enum i8042_ports    which_port;
    unsigned char       stat;
    unsigned char       byte;
    int         new_wptr;
    struct i8042_port   *port;

#ifdef DEBUG
    global->intr_thread = curthread;
#endif
    mutex_enter(&global->i8042_mutex);

    stat = ddi_get8(global->io_handle, global->io_addr + I8042_STAT);

    if (! (stat & I8042_STAT_OUTBF)) {
        ++i8042_unclaimed_interrupts;
        mutex_exit(&global->i8042_mutex);
#ifdef DEBUG
        global->intr_thread = NULL;
#endif
        return (DDI_INTR_UNCLAIMED);
    }

    byte = ddi_get8(global->io_handle, global->io_addr + I8042_DATA);

    which_port = (stat & I8042_STAT_AUXBF) ? AUX_PORT : MAIN_PORT;

    port = &global->i8042_ports[which_port];

    if (! port->initialized) {
        mutex_exit(&global->i8042_mutex);
#ifdef DEBUG
        global->intr_thread = NULL;
#endif
        return (DDI_INTR_CLAIMED);
    }

    /*
     * If interception is enabled, and the byte matches what is being
     * waited for, clear the interception flag and trigger a softintr
     * that will signal the waiter, then exit the interrupt handler
     * without passing the byte to the child's interrupt handler.
     */
    if (port->intr_intercept_enabled && (port->intercept[0] == byte ||
        port->intercept[1] == byte)) {
        port->intercepted_byte = byte;
        port->intr_intercept_enabled = B_FALSE;
        (void) ddi_intr_trigger_softint(global->intercept_sih, port);
        mutex_exit(&global->i8042_mutex);
#ifdef DEBUG
        global->intr_thread = NULL;
#endif
        return (DDI_INTR_CLAIMED);
    }

    new_wptr = (port->wptr + 1) % BUFSIZ;
    if (new_wptr == port->rptr) {
        port->overruns++;
#if defined(DEBUG)
        if (port->overruns % 50 == 1) {
            cmn_err(CE_WARN, "i8042/%d: %d overruns\n",
                which_port, port->overruns);
        }
#endif

        mutex_exit(&global->i8042_mutex);

#ifdef DEBUG
        global->intr_thread = NULL;
#endif
        return (DDI_INTR_CLAIMED);
    }

    port->buf[port->wptr] = byte;
    port->wptr = new_wptr;

#if defined(USE_SOFT_INTRS)
    if (port->soft_intr_enabled)
        (void) ddi_intr_trigger_softint(port->soft_hdl,
            port->intr_arg2);
#endif

    mutex_exit(&global->i8042_mutex);

#if !defined(USE_SOFT_INTRS)
    mutex_enter(&port->intr_mutex);
    if (port->intr_func != NULL)
        port->intr_func(port->intr_arg1, NULL);
    mutex_exit(&port->intr_mutex);
#endif

#ifdef DEBUG
    global->intr_thread = NULL;
#endif
    return (DDI_INTR_CLAIMED);
}

static void
i8042_write_command_byte(struct i8042 *global, unsigned char cb)
{
    mutex_enter(&global->i8042_out_mutex);
    i8042_send(global, I8042_CMD, I8042_CMD_WCB);
    i8042_send(global, I8042_DATA, cb);
    mutex_exit(&global->i8042_out_mutex);
}

/*
 * Send a byte to either the i8042 command or data register, depending on
 * the argument.
 */
static void
i8042_send(struct i8042 *global, int reg, unsigned char val)
{
    uint8_t stat;
    int tries = 0;

    /*
     * First, wait for the i8042 to be ready to accept data.
     */
    /*CONSTANTCONDITION*/
    while (1) {
        stat = ddi_get8(global->io_handle,
            global->io_addr + I8042_STAT);

        if ((stat & I8042_STAT_INBF) == 0) {
            ddi_put8(global->io_handle, global->io_addr+reg, val);
            break;
        }

        /* Don't wait unless we're going to check again */
        if (++tries >= max_wait_iterations)
            break;
        else
            drv_usecwait(USECS_PER_WAIT);
    }

#ifdef DEBUG
    if (tries >= MAX_WAIT_ITERATIONS)
        cmn_err(CE_WARN, "i8042_send: timeout!");
#endif
}

/*
 * Here's the interface to the virtual registers on the device.
 *
 * Normal interrupt-driven I/O:
 *
 * I8042_INT_INPUT_AVAIL    (r/o)
 *  Interrupt mode input bytes available?  Zero = No.
 * I8042_INT_INPUT_DATA     (r/o)
 *  Fetch interrupt mode input byte.
 * I8042_INT_OUTPUT_DATA    (w/o)
 *  Interrupt mode output byte.
 *
 * Polled I/O, used by (e.g.) kmdb, when normal system services are
 * unavailable:
 *
 * I8042_POLL_INPUT_AVAIL   (r/o)
 *  Polled mode input bytes available?  Zero = No.
 * I8042_POLL_INPUT_DATA    (r/o)
 *  Polled mode input byte.
 * I8042_POLL_OUTPUT_DATA   (w/o)
 *  Polled mode output byte.
 *
 * Note that in polled mode we cannot use cmn_err; only prom_printf is safe.
 */
static uint8_t
i8042_get8(ddi_acc_impl_t *handlep, uint8_t *addr)
{
    struct i8042_port *port;
    struct i8042 *global;
    uint8_t ret;
    ddi_acc_hdl_t   *h;
    uint8_t stat;

    h = (ddi_acc_hdl_t *)handlep;

    port = (struct i8042_port *)h->ah_bus_private;
    global = port->i8042_global;

    switch ((uintptr_t)addr) {
    case I8042_INT_INPUT_AVAIL:
        mutex_enter(&global->i8042_mutex);
        ret = port->rptr != port->wptr;
        mutex_exit(&global->i8042_mutex);
        return (ret);

    case I8042_INT_INPUT_DATA:
        mutex_enter(&global->i8042_mutex);

        if (port->rptr != port->wptr) {
            ret = port->buf[port->rptr];
            port->rptr = (port->rptr + 1) % BUFSIZ;
        } else {
#if defined(DEBUG)
            cmn_err(CE_WARN,
                "i8042:  Tried to read from empty buffer");
#endif
            ret = 0;
        }


        mutex_exit(&global->i8042_mutex);

        break;

#if defined(DEBUG)
    case I8042_INT_OUTPUT_DATA:
    case I8042_POLL_OUTPUT_DATA:
        cmn_err(CE_WARN, "i8042:  read of write-only register 0x%p",
            (void *)addr);
        ret = 0;
        break;
#endif

    case I8042_POLL_INPUT_AVAIL:
        if (port->rptr != port->wptr)
            return (B_TRUE);
        for (;;) {
            stat = ddi_get8(global->io_handle,
                global->io_addr + I8042_STAT);
            if ((stat & I8042_STAT_OUTBF) == 0)
                return (B_FALSE);
            switch (port->which) {
            case MAIN_PORT:
                if ((stat & I8042_STAT_AUXBF) == 0)
                    return (B_TRUE);
                break;
            case AUX_PORT:
                if ((stat & I8042_STAT_AUXBF) != 0)
                    return (B_TRUE);
                break;
            default:
                cmn_err(CE_WARN, "data from unknown port: %d",
                    port->which);
            }
            /*
             * Data for wrong port pending; discard it.
             */
            (void) ddi_get8(global->io_handle,
                global->io_addr + I8042_DATA);
        }

        /* NOTREACHED */

    case I8042_POLL_INPUT_DATA:
        if (port->rptr != port->wptr) {
            ret = port->buf[port->rptr];
            port->rptr = (port->rptr + 1) % BUFSIZ;
            return (ret);
        }

        stat = ddi_get8(global->io_handle,
            global->io_addr + I8042_STAT);
        if ((stat & I8042_STAT_OUTBF) == 0) {
#if defined(DEBUG)
            prom_printf("I8042_POLL_INPUT_DATA:  no data!\n");
#endif
            return (0);
        }
        ret = ddi_get8(global->io_handle,
            global->io_addr + I8042_DATA);
        switch (port->which) {
        case MAIN_PORT:
            if ((stat & I8042_STAT_AUXBF) == 0)
                return (ret);
            break;
        case AUX_PORT:
            if ((stat & I8042_STAT_AUXBF) != 0)
                return (ret);
            break;
        }
#if defined(DEBUG)
        prom_printf("I8042_POLL_INPUT_DATA:  data for wrong port!\n");
#endif
        return (0);

    default:
#if defined(DEBUG)
        cmn_err(CE_WARN, "i8042:  read of undefined register 0x%p",
            (void *)addr);
#endif
        ret = 0;
        break;
    }
    return (ret);
}

/*
 * Send the byte specified and wait for a reply -- either the retry response,
 * or another response (assumed to be an acknowledgement).  If the retry
 * response is received within the timeout period, the initial byte is resent
 * to the 8042.
 */
static int
i8042_do_intercept(ddi_acc_impl_t *handlep, struct i8042_port *port,
    uint8_t *oaddr, uint8_t byte, uint8_t retry_response)
{
    int     timedout = 0;
    clock_t tval;

    /*
     * Intercept the command response so that the 8042 interrupt handler
     * does not call the port's interrupt handler.
     */
    port->intercept_complete = B_FALSE;
    port->intr_intercept_enabled = B_TRUE;

    /* Maximum time to wait: */
    tval = ddi_get_lbolt() + drv_usectohz(MAX_WAIT_ITERATIONS *
        USECS_PER_WAIT);

    do {
        i8042_put8_nolock(handlep, oaddr, byte);

        /*
         * Wait for the command response
         */
        while (!port->intercept_complete) {
            if (cv_timedwait(&port->intercept_cv,
                &port->intercept_mutex, tval) < 0 &&
                !port->intercept_complete) {
                timedout = 1;
                break;
            }
        }

        /*
         * If the intercepted byte is the retry response, keep retrying
         * until we time out, or until the success response is received.
         */
        if (port->intercept_complete &&
            port->intercepted_byte == retry_response)
            port->intercept_complete = B_FALSE;

    } while (!timedout && !port->intercept_complete);

    port->intr_intercept_enabled = B_FALSE;

    return (timedout);
}

/*
 * The _rep_put8() operation is designed to allow child drivers to
 * execute commands that have responses or that have responses plus an
 * option byte.  These commands need to be executed atomically with respect
 * to commands from other children (some 8042 implementations get confused
 * when other child devices intersperse their commands while a command
 * to a different 8042-connected device is in flight).
 *
 * haddr points to a buffer with either 3 or 4 bytes.  Three bytes if a
 * command (byte 0) is being sent for which we expect a response code (byte 1)
 * (this function blocks until we either read a response code (or the retry
 * code (byte 2)) or until a timer expires).
 * Four if the command (byte 0) requires a response (byte 1) and then an
 * option byte (byte 3).  The option byte is only sent iff the response code
 * expected is received before the timeout.  As with the 3-byte request, byte
 * 2 is the retry response.
 *
 * While this function may technically called in interrupt context, it may
 * block (depending on the IPL of the i8042 interrupt handler vs. the handler
 * executing) for as long as the timeout (and fail if i8042_intr cannot run).
 *
 * flags are ignored.
 *
 */
/*ARGSUSED*/
static void
i8042_rep_put8(ddi_acc_impl_t *handlep, uint8_t *haddr, uint8_t *daddr,
    size_t repcount, uint_t flags)
{
    struct i8042_port   *port;
    struct i8042        *global;
    uint8_t         *oaddr;
    uintptr_t       devaddr = (uintptr_t)daddr;
    int         timedout = 0;
    boolean_t       polled;
    ddi_acc_hdl_t       *h;

    h = (ddi_acc_hdl_t *)handlep;

    port = (struct i8042_port *)h->ah_bus_private;
    global = port->i8042_global;

    /*
     * If this function is called, somehow, while we're in i8042_intr,
     * the logic below will not work.  That situation should never be
     * possible.
     */
    ASSERT(global->intr_thread != curthread);

    /*
     * Only support the main port for now
     */
    if (port->which != MAIN_PORT || (devaddr != I8042_INT_CMD_PLUS_PARAM &&
        devaddr != I8042_POLL_CMD_PLUS_PARAM)) {
#ifdef DEBUG
        prom_printf("WARNING: i8042_rep_put8(): port or address "
            "invalid\n");
#endif
        return;
    }

    /*
     * Only support commands with MAX one parameter.  The format of the
     * buffer supplied must be { <CMD>, <CMD_OK_RESPONSE>[, <PARAMETER>] }
     */
    if (repcount != 3 && repcount != 4) {
#ifdef DEBUG
        prom_printf("WARNING: i8042_rep_put8(): Invalid repetition "
            "count (%d)\n", (int)repcount);
#endif
        return;
    }

    polled = (devaddr == I8042_POLL_CMD_PLUS_PARAM);

    if (polled) {
        oaddr = (uint8_t *)I8042_POLL_OUTPUT_DATA;
    } else {
        oaddr = (uint8_t *)I8042_INT_OUTPUT_DATA;
        /*
         * Mutexes are only required for the non-polled (polled
         * via the virtual registers, NOT via the polling mechanism
         * used for systems without 8042 interrupts) case, because
         * when polling is used, the system is single-threaded
         * with interrupts disabled.
         */
        mutex_enter(&global->i8042_out_mutex);
    }

    /* Initialize the response and retry bytes from the caller */
    port->intercept[0] = haddr[1];
    port->intercept[1] = haddr[2];

    mutex_enter(&port->intercept_mutex);

    timedout = i8042_do_intercept(handlep, port, oaddr, haddr[0], haddr[2]);

    /*
     * If the first byte was processed before the timeout period, and
     * there's an option byte, send it now.
     */
    if (!timedout && repcount == 4) {
        timedout = i8042_do_intercept(handlep, port, oaddr, haddr[3],
            haddr[2]);
    }

    mutex_exit(&port->intercept_mutex);

#ifdef DEBUG
    if (timedout && i8042_debug)
        prom_printf("WARNING: i8042_rep_put8(): timed out waiting for "
            "command response\n");
#endif

    if (!polled)
        mutex_exit(&global->i8042_out_mutex);
}

static void
i8042_put8_nolock(ddi_acc_impl_t *handlep, uint8_t *addr, uint8_t value)
{
    struct i8042_port *port;
    struct i8042 *global;
    ddi_acc_hdl_t   *h;

    h = (ddi_acc_hdl_t *)handlep;

    port = (struct i8042_port *)h->ah_bus_private;
    global = port->i8042_global;

    switch ((uintptr_t)addr) {
    case I8042_INT_OUTPUT_DATA:
    case I8042_POLL_OUTPUT_DATA:

        if (port->which == AUX_PORT)
            i8042_send(global, I8042_CMD, I8042_CMD_WRITE_AUX);

        i8042_send(global, I8042_DATA, value);

        break;
    }
}

static void
i8042_put8(ddi_acc_impl_t *handlep, uint8_t *addr, uint8_t value)
{
    struct i8042 *global;
    ddi_acc_hdl_t   *h;

    h = (ddi_acc_hdl_t *)handlep;
    global = ((struct i8042_port *)h->ah_bus_private)->i8042_global;

    switch ((uintptr_t)addr) {
    case I8042_INT_OUTPUT_DATA:
    case I8042_POLL_OUTPUT_DATA:

        if ((uintptr_t)addr == I8042_INT_OUTPUT_DATA)
            mutex_enter(&global->i8042_out_mutex);

        i8042_put8_nolock(handlep, addr, value);

        if ((uintptr_t)addr == I8042_INT_OUTPUT_DATA)
            mutex_exit(&global->i8042_out_mutex);

        break;

    case I8042_INT_CMD_PLUS_PARAM:
    case I8042_POLL_CMD_PLUS_PARAM:

        break;

#if defined(DEBUG)
    case I8042_INT_INPUT_AVAIL:
    case I8042_INT_INPUT_DATA:
    case I8042_POLL_INPUT_AVAIL:
    case I8042_POLL_INPUT_DATA:
        cmn_err(CE_WARN, "i8042:  write of read-only register 0x%p",
            (void *)addr);
        break;

    default:
        cmn_err(CE_WARN, "i8042:  read of undefined register 0x%p",
            (void *)addr);
        break;
#endif
    }
}


/* ARGSUSED */
static int
i8042_intr_ops(dev_info_t *dip, dev_info_t *rdip, ddi_intr_op_t intr_op,
    ddi_intr_handle_impl_t *hdlp, void *result)
{
    struct i8042_port *port;
#if defined(USE_SOFT_INTRS)
    struct i8042    *global;
    int     ret;
#endif

    switch (intr_op) {
    case DDI_INTROP_SUPPORTED_TYPES:
        *(int *)result = DDI_INTR_TYPE_FIXED;
        break;
    case DDI_INTROP_GETCAP:
        if (i_ddi_intr_ops(dip, rdip, intr_op, hdlp, result)
            == DDI_FAILURE)
            *(int *)result = 0;
        break;
    case DDI_INTROP_NINTRS:
    case DDI_INTROP_NAVAIL:
        *(int *)result = 1;
        break;
    case DDI_INTROP_ALLOC:
        *(int *)result = hdlp->ih_scratch1;
        break;
    case DDI_INTROP_FREE:
        break;
    case DDI_INTROP_GETPRI:
        /* Hard coding it for x86 */
        *(int *)result = 5;
        break;
    case DDI_INTROP_ADDISR:
        port = ddi_get_parent_data(rdip);

#if defined(USE_SOFT_INTRS)
        global = port->i8042_global;
        ret = ddi_intr_add_softint(rdip, &port->soft_hdl,
            I8042_SOFTINT_PRI, hdlp->ih_cb_func, hdlp->ih_cb_arg1);

        if (ret != DDI_SUCCESS) {
#if defined(DEBUG)
            cmn_err(CE_WARN, "%s #%d:  "
                "Cannot add soft interrupt for %s #%d, ret=%d.",
                DRIVER_NAME(dip), ddi_get_instance(dip),
                DRIVER_NAME(rdip), ddi_get_instance(rdip), ret);
#endif  /* defined(DEBUG) */
            return (ret);
        }

#else   /* defined(USE_SOFT_INTRS) */
        mutex_enter(&port->intr_mutex);
        port->intr_func = hdlp->ih_cb_func;
        port->intr_arg1 = hdlp->ih_cb_arg1;
        port->intr_arg2 = hdlp->ih_cb_arg2;
        mutex_exit(&port->intr_mutex);
#endif  /* defined(USE_SOFT_INTRS) */
        break;
    case DDI_INTROP_REMISR:
        port = ddi_get_parent_data(rdip);

#if defined(USE_SOFT_INTRS)
        global = port->i8042_global;
        mutex_enter(&global->i8042_mutex);
        port->soft_hdl = 0;
        mutex_exit(&global->i8042_mutex);
#else   /* defined(USE_SOFT_INTRS) */
        mutex_enter(&port->intr_mutex);
        port->intr_func = NULL;
        mutex_exit(&port->intr_mutex);
#endif  /* defined(USE_SOFT_INTRS) */
        break;
    case DDI_INTROP_ENABLE:
        port = ddi_get_parent_data(rdip);
#if defined(USE_SOFT_INTRS)
        global = port->i8042_global;
        mutex_enter(&global->i8042_mutex);
        port->soft_intr_enabled = B_TRUE;
        if (port->wptr != port->rptr)
            (void) ddi_intr_trigger_softint(port->soft_hdl,
                port->intr_arg2);
        mutex_exit(&global->i8042_mutex);
#else   /* defined(USE_SOFT_INTRS) */
        mutex_enter(&port->intr_mutex);
        if (port->wptr != port->rptr)
            port->intr_func(port->intr_arg1, port->intr_arg2);
        mutex_exit(&port->intr_mutex);
#endif  /* defined(USE_SOFT_INTRS) */
        break;
    case DDI_INTROP_DISABLE:
#if defined(USE_SOFT_INTRS)
        port = ddi_get_parent_data(rdip);
        global = port->i8042_global;
        mutex_enter(&global->i8042_mutex);
        port->soft_intr_enabled = B_FALSE;
        (void) ddi_intr_remove_softint(port->soft_hdl);
        mutex_exit(&global->i8042_mutex);
#endif  /* defined(USE_SOFT_INTRS) */
        break;
    default:
        return (DDI_FAILURE);
    }

    return (DDI_SUCCESS);
}

static int
i8042_ctlops(dev_info_t *dip, dev_info_t *rdip,
    ddi_ctl_enum_t op, void *arg, void *result)
{
    int *iprop;
    unsigned int    iprop_len;
    int which_port;
    char    name[16];
    struct i8042    *global;
    dev_info_t  *child;

    global = ddi_get_driver_private(dip);

    switch (op) {
    case DDI_CTLOPS_INITCHILD:
        child = (dev_info_t *)arg;
        if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, child,
            DDI_PROP_DONTPASS, "reg", &iprop, &iprop_len) !=
            DDI_SUCCESS) {
#if defined(DEBUG)
            cmn_err(CE_WARN, "%s #%d:  Missing 'reg' on %s@???",
                DRIVER_NAME(dip), ddi_get_instance(dip),
                ddi_node_name(child));
#endif
            return (DDI_FAILURE);
        }
        which_port = iprop[0];
        ddi_prop_free((void *)iprop);

        (void) sprintf(name, "%d", which_port);
        ddi_set_name_addr(child, name);
        ddi_set_parent_data(child,
            (caddr_t)&global->i8042_ports[which_port]);
        return (DDI_SUCCESS);

    case DDI_CTLOPS_UNINITCHILD:
        child = (dev_info_t *)arg;
        ddi_set_name_addr(child, NULL);
        ddi_set_parent_data(child, NULL);
        return (DDI_SUCCESS);

    case DDI_CTLOPS_REPORTDEV:
        cmn_err(CE_CONT, "?8042 device:  %s@%s, %s # %d\n",
            ddi_node_name(rdip), ddi_get_name_addr(rdip),
            DRIVER_NAME(rdip), ddi_get_instance(rdip));
        return (DDI_SUCCESS);

    default:
        return (ddi_ctlops(dip, rdip, op, arg, result));
    }
    /* NOTREACHED */
}

#if defined(__i386) || defined(__amd64)
static dev_info_t *
i8042_devi_findchild_by_node_name(dev_info_t *pdip, char *nodename)
{
    dev_info_t *child;

    ASSERT(DEVI_BUSY_OWNED(pdip));

    if (nodename == NULL) {
        return ((dev_info_t *)NULL);
    }

    for (child = ddi_get_child(pdip); child != NULL;
        child = ddi_get_next_sibling(child)) {

        if (strcmp(ddi_node_name(child), nodename) == 0)
            break;
    }
    return (child);
}

static void
alloc_kb_mouse(dev_info_t *i8042_dip, int nodes_needed)
{
    dev_info_t *xdip;
    int acpi_off = 0;
    char *acpi_prop;

    /* don't alloc unless acpi is off */
    if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(),
        DDI_PROP_DONTPASS, "acpi-enum", &acpi_prop) == DDI_PROP_SUCCESS) {
        if (strcmp("off", acpi_prop) == 0) {
            acpi_off = 1;
        }
        ddi_prop_free(acpi_prop);
    }
    if (acpi_off == 0) {
        return;
    }

    if (nodes_needed & I8042_MOUSE) {
        /* mouse */
        ndi_devi_alloc_sleep(i8042_dip, "mouse",
            (pnode_t)DEVI_SID_NODEID, &xdip);
        (void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
            "reg", 1);
        (void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
            "interrupts", 2);
        (void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
            "compatible", "pnpPNP,f03");
        /*
         * The device_type property does not matter on SPARC.  Retain it
         * on x86 for compatibility with the previous pseudo-prom.
         */
        (void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
            "device_type", "mouse");
        (void) ndi_devi_bind_driver(xdip, 0);
    }

    if (nodes_needed & I8042_KEYBOARD) {
        /* keyboard */
        ndi_devi_alloc_sleep(i8042_dip, "keyboard",
            (pnode_t)DEVI_SID_NODEID, &xdip);
        (void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
            "reg", 0);
        (void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
            "interrupts", 1);
        (void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
            "compatible", "pnpPNP,303");
        (void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
            "device_type", "keyboard");
        (void) ndi_devi_bind_driver(xdip, 0);
    }
}
#endif

static int
i8042_bus_config(dev_info_t *parent, uint_t flags,
    ddi_bus_config_op_t op, void *arg, dev_info_t **childp)
{
#if defined(__i386) || defined(__amd64)
    int nodes_needed = 0;
    int circ;

    /*
     * On x86 systems, if ACPI is disabled, the only way the
     * keyboard and mouse can be enumerated is by creating them
     * manually.  The following code searches for the existence of
     * the keyboard and mouse nodes and creates them if they are not
     * found.
     */
    ndi_devi_enter(parent, &circ);
    if (i8042_devi_findchild_by_node_name(parent, "keyboard") == NULL)
        nodes_needed |= I8042_KEYBOARD;
    if (i8042_devi_findchild_by_node_name(parent, "mouse") == NULL)
        nodes_needed |= I8042_MOUSE;

    /* If the mouse and keyboard nodes do not already exist, create them */
    if (nodes_needed)
        alloc_kb_mouse(parent, nodes_needed);
    ndi_devi_exit(parent, circ);
#endif
    return (ndi_busop_bus_config(parent, flags, op, arg, childp, 0));
}

static int
i8042_bus_unconfig(dev_info_t *parent, uint_t flags,
    ddi_bus_config_op_t op, void *arg)
{
    /*
     * The NDI_UNCONFIG flag allows the reference count on this nexus to be
     * decremented when children's drivers are unloaded, enabling the nexus
     * itself to be unloaded.
     */
    return (ndi_busop_bus_unconfig(parent, flags | NDI_UNCONFIG, op, arg));
}

#ifdef __sparc
static int
i8042_build_interrupts_property(dev_info_t *dip)
{
    dev_info_t *child = ddi_get_child(dip);
    uint_t nintr;
    int *intrs = NULL;
    int interrupts[MAX_INTERRUPTS];
    int i = 0;

    /* Walk the children of this node, scanning for interrupts properties */
    while (child != NULL && i < MAX_INTERRUPTS) {

        if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, child,
            DDI_PROP_DONTPASS, "interrupts", &intrs, &nintr)
            == DDI_PROP_SUCCESS && intrs != NULL) {

            while (nintr > 0 && i < MAX_INTERRUPTS) {
                interrupts[i++] = intrs[--nintr];
            }
            ddi_prop_free(intrs);
        }

        child = ddi_get_next_sibling(child);
    }

    if (ddi_prop_update_int_array(DDI_DEV_T_NONE, dip, "interrupts",
        interrupts, i) != DDI_PROP_SUCCESS) {

        return (DDI_FAILURE);
    }

    /*
     * Oh, the humanity. On the platforms on which we need to
     * synthesize an interrupts property, we ALSO need to update the
     * device_type property, and set it to "serial" in order for the
     * correct interrupt PIL to be chosen by the framework.
     */
    if (ddi_prop_update_string(DDI_DEV_T_NONE, dip, "device_type", "serial")
        != DDI_PROP_SUCCESS) {

        return (DDI_FAILURE);
    }

    return (DDI_SUCCESS);
}

static boolean_t
i8042_is_polling_platform(void)
{
    /*
     * Returns true if this platform is one of the platforms
     * that has interrupt issues with the PS/2 keyboard/mouse.
     */
    if (PLATFORM_MATCH("SUNW,UltraAX-"))
        return (B_TRUE);
    else
        return (B_FALSE);
}
#endif

/*
 * arg1 is the global i8042 state pointer (not used)
 * arg2 is the port pointer for the intercepted port
 */
/*ARGSUSED*/
static uint_t
i8042_intercept_softint(caddr_t arg1, caddr_t arg2)
{
    struct i8042_port *port = (struct i8042_port *)arg2;
    ASSERT(port != NULL);

    mutex_enter(&port->intercept_mutex);
    if (!port->intercept_complete) {
        port->intercept_complete = B_TRUE;
        cv_signal(&port->intercept_cv);
        mutex_exit(&port->intercept_mutex);
        return (DDI_INTR_CLAIMED);
    }
    mutex_exit(&port->intercept_mutex);
    return (DDI_INTR_UNCLAIMED);
}