port/srpt/srpt_ch.c

	srpt_ch.c revision 1bdd6c0e3710e91cb1f31aa78de33cb638494480
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 * RDMA channel interface for Solaris SCSI RDMA Protocol Target (SRP)
 * transport port provider module for the COMSTAR framework.
 */

#include <sys/cpuvar.h>
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/stat.h>
#include <sys/file.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/modctl.h>
#include <sys/sysmacros.h>
#include <sys/sdt.h>
#include <sys/taskq.h>
#include <sys/scsi/scsi.h>
#include <sys/ib/ibtl/ibti.h>

#include <stmf.h>
#include <stmf_ioctl.h>
#include <portif.h>

#include "srp.h"
#include "srpt_impl.h"
#include "srpt_ioc.h"
#include "srpt_stp.h"
#include "srpt_ch.h"

extern srpt_ctxt_t *srpt_ctxt;
extern uint16_t srpt_send_msg_depth;

/*
 * Prototypes.
 */
static void srpt_ch_scq_hdlr(ibt_cq_hdl_t cq_dhl, void *arg);
static void srpt_ch_rcq_hdlr(ibt_cq_hdl_t cq_dhl, void *arg);
static void srpt_ch_process_iu(srpt_channel_t *ch, srpt_iu_t *iu);

/*
 * srpt_ch_alloc()
 */
srpt_channel_t *
srpt_ch_alloc(srpt_target_port_t *tgt, uint8_t port)
{
    ibt_status_t            status;
    srpt_channel_t          *ch;
    ibt_cq_attr_t           cq_attr;
    ibt_rc_chan_alloc_args_t    ch_args;
    uint32_t            cq_real_size;
    srpt_ioc_t          *ioc;

    ASSERT(tgt != NULL);
    ioc = tgt->tp_ioc;
    ASSERT(ioc != NULL);

    ch = kmem_zalloc(sizeof (*ch), KM_SLEEP);
    rw_init(&ch->ch_rwlock, NULL, RW_DRIVER, NULL);
    mutex_init(&ch->ch_reflock, NULL, MUTEX_DRIVER, NULL);
    cv_init(&ch->ch_cv_complete, NULL, CV_DRIVER, NULL);
    ch->ch_refcnt   = 1;
    ch->ch_cv_waiters = 0;

    ch->ch_state  = SRPT_CHANNEL_CONNECTING;
    ch->ch_tgt    = tgt;
    ch->ch_req_lim_delta = 0;
    ch->ch_ti_iu_len = 0;

    cq_attr.cq_size  = srpt_send_msg_depth * 2;
    cq_attr.cq_sched = 0;
    cq_attr.cq_flags = IBT_CQ_NO_FLAGS;

    status = ibt_alloc_cq(ioc->ioc_ibt_hdl, &cq_attr, &ch->ch_scq_hdl,
        &cq_real_size);
    if (status != IBT_SUCCESS) {
        SRPT_DPRINTF_L1("ch_alloc, send CQ alloc error (%d)",
            status);
        goto scq_alloc_err;
    }

    cq_attr.cq_size  = srpt_send_msg_depth + 1;
    cq_attr.cq_sched = 0;
    cq_attr.cq_flags = IBT_CQ_NO_FLAGS;

    status = ibt_alloc_cq(ioc->ioc_ibt_hdl, &cq_attr, &ch->ch_rcq_hdl,
        &cq_real_size);
    if (status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_alloc, receive CQ alloc error (%d)",
            status);
        goto rcq_alloc_err;
    }

    ibt_set_cq_handler(ch->ch_scq_hdl, srpt_ch_scq_hdlr, ch);
    ibt_set_cq_handler(ch->ch_rcq_hdl, srpt_ch_rcq_hdlr, ch);
    ibt_enable_cq_notify(ch->ch_scq_hdl, IBT_NEXT_COMPLETION);
    ibt_enable_cq_notify(ch->ch_rcq_hdl, IBT_NEXT_COMPLETION);

    ch_args.rc_flags   = IBT_WR_SIGNALED;

    /* Maker certain initiator can not read/write our memory */
    ch_args.rc_control = 0;

    ch_args.rc_hca_port_num = port;

    /*
     * Any SRP IU can result in a number of STMF data buffer transfers
     * and those transfers themselves could span multiple initiator
     * buffers.  Therefore, the number of send WQE's actually required
     * can vary.  Here we assume that on average an I/O will require
     * no more than SRPT_MAX_OUT_IO_PER_CMD send WQE's.  In practice
     * this will prevent send work queue overrun, but we will also
     * inform STMF to throttle I/O should the work queue become full.
     *
     * If the HCA tells us the max outstanding WRs for a channel is
     * lower than our default, use the HCA value.
     */
    ch_args.rc_sizes.cs_sq = min(ioc->ioc_attr.hca_max_chan_sz,
        (srpt_send_msg_depth * SRPT_MAX_OUT_IO_PER_CMD));
    ch_args.rc_sizes.cs_rq =  0;
    ch_args.rc_sizes.cs_sq_sgl = 2;
    ch_args.rc_sizes.cs_rq_sgl = 0;

    ch_args.rc_scq = ch->ch_scq_hdl;
    ch_args.rc_rcq = ch->ch_rcq_hdl;
    ch_args.rc_pd  = ioc->ioc_pd_hdl;
    ch_args.rc_clone_chan = NULL;
    ch_args.rc_srq = ioc->ioc_srq_hdl;

    status = ibt_alloc_rc_channel(ioc->ioc_ibt_hdl, IBT_ACHAN_USES_SRQ,
        &ch_args, &ch->ch_chan_hdl, &ch->ch_sizes);
    if (status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_alloc, IBT channel alloc error (%d)",
            status);
        goto qp_alloc_err;
    }

    /*
     * Create pool of send WQE entries to map send wqe work IDs
     * to various types (specifically in error cases where OP
     * is not known).
     */
    ch->ch_num_swqe = ch->ch_sizes.cs_sq;
    SRPT_DPRINTF_L2("ch_alloc, number of SWQEs = %u", ch->ch_num_swqe);
    ch->ch_swqe = kmem_zalloc(sizeof (srpt_swqe_t) * ch->ch_num_swqe,
        KM_SLEEP);
    if (ch->ch_swqe == NULL) {
        SRPT_DPRINTF_L2("ch_alloc, SWQE alloc error");
        ibt_free_channel(ch->ch_chan_hdl);
        goto qp_alloc_err;
    }
    mutex_init(&ch->ch_swqe_lock, NULL, MUTEX_DRIVER, NULL);
    ch->ch_head = 1;
    for (ch->ch_tail = 1; ch->ch_tail < ch->ch_num_swqe -1; ch->ch_tail++) {
        ch->ch_swqe[ch->ch_tail].sw_next = ch->ch_tail + 1;
    }
    ch->ch_swqe[ch->ch_tail].sw_next = 0;

    ibt_set_chan_private(ch->ch_chan_hdl, ch);
    return (ch);

qp_alloc_err:
    ibt_free_cq(ch->ch_rcq_hdl);

rcq_alloc_err:
    ibt_free_cq(ch->ch_scq_hdl);

scq_alloc_err:
    cv_destroy(&ch->ch_cv_complete);
    mutex_destroy(&ch->ch_reflock);
    rw_destroy(&ch->ch_rwlock);
    kmem_free(ch, sizeof (*ch));

    return (NULL);
}

/*
 * srpt_ch_add_ref()
 */
void
srpt_ch_add_ref(srpt_channel_t *ch)
{
    mutex_enter(&ch->ch_reflock);
    ch->ch_refcnt++;
    SRPT_DPRINTF_L4("ch_add_ref, ch (%p), refcnt (%d)",
        (void *)ch, ch->ch_refcnt);
    ASSERT(ch->ch_refcnt != 0);
    mutex_exit(&ch->ch_reflock);
}

/*
 * srpt_ch_release_ref()
 *
 * A non-zero value for wait causes thread to block until all references
 * to channel are released.
 */
void
srpt_ch_release_ref(srpt_channel_t *ch, uint_t wait)
{
    mutex_enter(&ch->ch_reflock);

    SRPT_DPRINTF_L4("ch_release_ref, ch (%p), refcnt (%d), wait (%d)",
        (void *)ch, ch->ch_refcnt, wait);

    ASSERT(ch->ch_refcnt != 0);

    ch->ch_refcnt--;

    if (ch->ch_refcnt != 0) {
        if (wait) {
            ch->ch_cv_waiters++;
            while (ch->ch_refcnt != 0) {
                cv_wait(&ch->ch_cv_complete, &ch->ch_reflock);
            }
            ch->ch_cv_waiters--;
        } else {
            mutex_exit(&ch->ch_reflock);
            return;
        }
    }

    /*
     * Last thread out frees the IB resources, locks/conditions and memory
     */
    if (ch->ch_cv_waiters > 0) {
        /* we're not last, wake someone else up */
        cv_signal(&ch->ch_cv_complete);
        mutex_exit(&ch->ch_reflock);
        return;
    }

    SRPT_DPRINTF_L3("ch_release_ref - release resources");
    if (ch->ch_chan_hdl) {
        SRPT_DPRINTF_L3("ch_release_ref - free channel");
        ibt_free_channel(ch->ch_chan_hdl);
    }

    if (ch->ch_scq_hdl) {
        ibt_free_cq(ch->ch_scq_hdl);
    }

    if (ch->ch_rcq_hdl) {
        ibt_free_cq(ch->ch_rcq_hdl);
    }

    /*
     * There should be no IU's associated with this
     * channel on the SCSI session.
     */
    if (ch->ch_session != NULL) {
        ASSERT(list_is_empty(&ch->ch_session->ss_task_list));

        /*
         * Currently only have one channel per session, we will
         * need to release a reference when support is added
         * for multi-channel target login.
         */
        srpt_stp_free_session(ch->ch_session);
        ch->ch_session = NULL;
    }

    kmem_free(ch->ch_swqe, sizeof (srpt_swqe_t) * ch->ch_num_swqe);
    mutex_destroy(&ch->ch_swqe_lock);
    mutex_exit(&ch->ch_reflock);
    mutex_destroy(&ch->ch_reflock);
    rw_destroy(&ch->ch_rwlock);
    kmem_free(ch, sizeof (srpt_channel_t));
}

/*
 * srpt_ch_disconnect()
 */
void
srpt_ch_disconnect(srpt_channel_t *ch)
{
    ibt_status_t        status;

    SRPT_DPRINTF_L3("ch_disconnect, invoked for ch (%p)",
        (void *)ch);

    rw_enter(&ch->ch_rwlock, RW_WRITER);

    /*
     * If we are already in the process of disconnecting then
     * nothing need be done, CM will call-back into us when done.
     */
    if (ch->ch_state == SRPT_CHANNEL_DISCONNECTING) {
        SRPT_DPRINTF_L2("ch_disconnect, called when"
            " disconnect in progress");
        rw_exit(&ch->ch_rwlock);
        return;
    }
    ch->ch_state = SRPT_CHANNEL_DISCONNECTING;
    rw_exit(&ch->ch_rwlock);

    /*
     * Initiate the sending of the CM DREQ message, the private data
     * should be the SRP Target logout IU.  We don't really care about
     * the remote CM DREP message returned.  We issue this in an
     * asynchronous manner and will cleanup when called back by CM.
     */
    status = ibt_close_rc_channel(ch->ch_chan_hdl, IBT_NONBLOCKING,
        NULL, 0, NULL, NULL, 0);

    if (status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_disconnect, close RC channel"
            " err(%d)", status);
    }
}

/*
 * srpt_ch_cleanup()
 */
void
srpt_ch_cleanup(srpt_channel_t *ch)
{
    srpt_iu_t       *iu;
    srpt_iu_t       *next;
    ibt_wc_t        wc;
    srpt_target_port_t  *tgt;
    srpt_channel_t      *tgt_ch;
    scsi_task_t     *iutask;

    SRPT_DPRINTF_L3("ch_cleanup, invoked for ch(%p), state(%d)",
        (void *)ch, ch->ch_state);

    /* add a ref for the channel until we're done */
    srpt_ch_add_ref(ch);

    tgt = ch->ch_tgt;
    ASSERT(tgt != NULL);

    /*
     * Make certain the channel is in the target ports list of
     * known channels and remove it (releasing the target
     * ports reference to the channel).
     */
    mutex_enter(&tgt->tp_ch_list_lock);
    tgt_ch = list_head(&tgt->tp_ch_list);
    while (tgt_ch != NULL) {
        if (tgt_ch == ch) {
            list_remove(&tgt->tp_ch_list, tgt_ch);
            srpt_ch_release_ref(tgt_ch, 0);
            break;
        }
        tgt_ch = list_next(&tgt->tp_ch_list, tgt_ch);
    }
    mutex_exit(&tgt->tp_ch_list_lock);

    if (tgt_ch == NULL) {
        SRPT_DPRINTF_L2("ch_cleanup, target channel no"
            "longer known to target");
        srpt_ch_release_ref(ch, 0);
        return;
    }

    rw_enter(&ch->ch_rwlock, RW_WRITER);
    ch->ch_state = SRPT_CHANNEL_DISCONNECTING;
    rw_exit(&ch->ch_rwlock);


    /*
     * Generally the IB CQ's will have been drained prior to
     * getting to this call; but we check here to make certain.
     */
    if (ch->ch_scq_hdl) {
        SRPT_DPRINTF_L4("ch_cleanup, start drain (%d)",
            ch->ch_swqe_posted);
        while ((int)ch->ch_swqe_posted > 0) {
            delay(drv_usectohz(1000));
        }
        ibt_set_cq_handler(ch->ch_scq_hdl, NULL, NULL);
    }

    if (ch->ch_rcq_hdl) {
        ibt_set_cq_handler(ch->ch_rcq_hdl, NULL, NULL);

        while (ibt_poll_cq(ch->ch_rcq_hdl, &wc, 1, NULL) ==
            IBT_SUCCESS) {
            iu = (srpt_iu_t *)(uintptr_t)wc.wc_id;
            SRPT_DPRINTF_L4("ch_cleanup, recovering"
                " outstanding RX iu(%p)", (void *)iu);
            mutex_enter(&iu->iu_lock);
            srpt_ioc_repost_recv_iu(iu->iu_ioc, iu);
            /*
             * Channel reference has not yet been added for this
             * IU, so do not decrement.
             */
            mutex_exit(&iu->iu_lock);
        }
    }

    /*
     * Go through the list of outstanding IU for the channel's SCSI
     * session and for each either abort or complete an abort.
     */
    rw_enter(&ch->ch_rwlock, RW_READER);
    if (ch->ch_session != NULL) {
        rw_enter(&ch->ch_session->ss_rwlock, RW_READER);
        iu = list_head(&ch->ch_session->ss_task_list);
        while (iu != NULL) {
            next = list_next(&ch->ch_session->ss_task_list, iu);

            mutex_enter(&iu->iu_lock);
            if (ch == iu->iu_ch) {
                if (iu->iu_stmf_task == NULL) {
                    cmn_err(CE_NOTE,
                        "ch_cleanup, NULL stmf task");
                    ASSERT(0);
                }
                iutask = iu->iu_stmf_task;
            } else {
                iutask = NULL;
            }
            mutex_exit(&iu->iu_lock);

            if (iutask != NULL) {
                SRPT_DPRINTF_L4("ch_cleanup, aborting "
                    "task(%p)", (void *)iutask);
                stmf_abort(STMF_QUEUE_TASK_ABORT, iutask,
                    STMF_ABORTED, NULL);
            }
            iu = next;
        }
        rw_exit(&ch->ch_session->ss_rwlock);
    }
    rw_exit(&ch->ch_rwlock);

    srpt_ch_release_ref(ch, 0);
}

/*
 * srpt_ch_rsp_comp()
 *
 * Process a completion for an IB SEND message.  A SEND completion
 * is for a SRP response packet sent back to the initiator.  It
 * will not have a STMF SCSI task associated with it if it was
 * sent for a rejected IU, or was a task management abort response.
 */
static void
srpt_ch_rsp_comp(srpt_channel_t *ch, srpt_iu_t *iu,
    ibt_wc_status_t wc_status)
{
    ASSERT(iu->iu_ch == ch);

    /*
     * If work completion indicates failure, decrement the
     * send posted count.  If it is a flush error, we are
     * done; for all other errors start a channel disconnect.
     */
    if (wc_status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_rsp_comp, WC status err(%d)",
            wc_status);
        atomic_dec_32(&iu->iu_sq_posted_cnt);

        if (wc_status != IBT_WC_WR_FLUSHED_ERR) {
            srpt_ch_disconnect(ch);
        }

        mutex_enter(&iu->iu_lock);
        if (iu->iu_stmf_task == NULL) {
            srpt_ioc_repost_recv_iu(iu->iu_ioc, iu);
            mutex_exit(&iu->iu_lock);
            srpt_ch_release_ref(ch, 0);
        } else {
            /* cleanup handled in task_free */
            mutex_exit(&iu->iu_lock);
        }
        return;
    }

    /*
     * If the IU response completion is not associated with
     * with a SCSI task, release the IU to return the resource
     * and the reference to the channel it holds.
     */
    mutex_enter(&iu->iu_lock);
    atomic_dec_32(&iu->iu_sq_posted_cnt);

    if (iu->iu_stmf_task == NULL) {
        srpt_ioc_repost_recv_iu(iu->iu_ioc, iu);
        mutex_exit(&iu->iu_lock);
        srpt_ch_release_ref(ch, 0);
        return;
    }

    /*
     * If STMF has requested the IU task be aborted, then notify STMF
     * the command is now aborted.
     */
    if ((iu->iu_flags & SRPT_IU_STMF_ABORTING) != 0) {
        scsi_task_t *abort_task = iu->iu_stmf_task;

        mutex_exit(&iu->iu_lock);
        stmf_abort(STMF_REQUEUE_TASK_ABORT_LPORT, abort_task,
            STMF_ABORTED, NULL);
        return;
    }

    /*
     * We should not get a SEND completion where the task has already
     * completed aborting and STMF has been informed.
     */
    ASSERT((iu->iu_flags & SRPT_IU_ABORTED) == 0);

    /*
     * Successful status response completion for SCSI task.
     * Let STMF know we are done.
     */
    mutex_exit(&iu->iu_lock);

    stmf_send_status_done(iu->iu_stmf_task, STMF_SUCCESS,
        STMF_IOF_LPORT_DONE);
}

/*
 * srpt_ch_data_comp()
 *
 * Process an IB completion for a RDMA operation.  This completion
 * should be associated with the last RDMA operation for any
 * data buffer transfer.
 */
static void
srpt_ch_data_comp(srpt_channel_t *ch, stmf_data_buf_t *stmf_dbuf,
    ibt_wc_status_t wc_status)
{
    srpt_ds_dbuf_t      *dbuf;
    srpt_iu_t       *iu;
    stmf_status_t       status;

    ASSERT(stmf_dbuf != NULL);

    dbuf = (srpt_ds_dbuf_t *)stmf_dbuf->db_port_private;

    ASSERT(dbuf != NULL);

    iu = dbuf->db_iu;

    ASSERT(iu != NULL);
    ASSERT(iu->iu_ch == ch);

    /*
     * If work completion indicates non-flush failure, then
     * start a channel disconnect (asynchronous) and release
     * the reference to the IU.  The task will be cleaned
     * up with STMF during channel shutdown processing.
     */
    if (wc_status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_data_comp, WC status err(%d)",
            wc_status);
        if (wc_status != IBT_WC_WR_FLUSHED_ERR) {
            srpt_ch_disconnect(ch);
        }
        atomic_dec_32(&iu->iu_sq_posted_cnt);
        return;
    }

    /*
     * If STMF has requested this task be aborted, then if this is the
     * last I/O operation outstanding, notify STMF the task has been
     *  aborted and ignore the completion.
     */
    mutex_enter(&iu->iu_lock);
    atomic_dec_32(&iu->iu_sq_posted_cnt);

    if ((iu->iu_flags & SRPT_IU_STMF_ABORTING) != 0) {
        scsi_task_t *abort_task = iu->iu_stmf_task;

        mutex_exit(&iu->iu_lock);
        stmf_abort(STMF_REQUEUE_TASK_ABORT_LPORT, abort_task,
            STMF_ABORTED, NULL);
        return;
    }

    /*
     * We should not get an RDMA completion where the task has already
     * completed aborting and STMF has been informed.
     */
    ASSERT((iu->iu_flags & SRPT_IU_ABORTED) == 0);

    /*
     * Good completion for last RDMA op associated with a data buffer
     * I/O, if specified initiate status otherwise let STMF know we are
     * done.
     */
    stmf_dbuf->db_xfer_status = STMF_SUCCESS;
    mutex_exit(&iu->iu_lock);
    if ((stmf_dbuf->db_flags & DB_SEND_STATUS_GOOD) != 0) {
        status = srpt_stp_send_status(dbuf->db_iu->iu_stmf_task, 0);
        if (status == STMF_SUCCESS) {
            return;
        }
        stmf_dbuf->db_xfer_status = STMF_FAILURE;
    }

    stmf_data_xfer_done(dbuf->db_iu->iu_stmf_task, stmf_dbuf, 0);
}

/*
 * srpt_ch_scq_hdlr()
 */
static void
srpt_ch_scq_hdlr(ibt_cq_hdl_t cq_hdl, void *arg)
{
    ibt_status_t        status;
    srpt_channel_t      *ch = arg;
    ibt_wc_t        wc[SRPT_SEND_WC_POLL_SIZE];
    ibt_wc_t        *wcp;
    int         i;
    uint32_t        cq_rearmed = 0;
    uint32_t        entries;
    srpt_swqe_t     *swqe;

    ASSERT(ch != NULL);

    /* Reference channel for the duration of this call */
    srpt_ch_add_ref(ch);

    for (;;) {
        status = ibt_poll_cq(cq_hdl, &wc[0], SRPT_SEND_WC_POLL_SIZE,
            &entries);
        if (status == IBT_CQ_EMPTY) {
            /*
             * CQ drained, if we have not rearmed the CQ
             * do so and poll to eliminate race; otherwise
             * we are done.
             */
            if (cq_rearmed == 0) {
                ibt_enable_cq_notify(ch->ch_scq_hdl,
                    IBT_NEXT_COMPLETION);
                cq_rearmed = 1;
                continue;
            } else {
                break;
            }
        } else if (status != IBT_SUCCESS) {
            /*
             * This error should not happen, it indicates something
             * abnormal has gone wrong and represents either a
             * hardware or programming logic coding error.
             */
            SRPT_DPRINTF_L2("ch_scq_hdlr, unexpected CQ err(%d)",
                status);
            srpt_ch_disconnect(ch);
            break;
        }

        for (wcp = wc, i = 0; i < entries; i++, wcp++) {

            /*
             * A zero work ID indicates this CQE is associated
             * with an intermediate post of a RDMA data transfer
             * operation.  Since intermediate data requests are
             * unsignaled, we should only get these if there was
             * an error.  No action is required.
             */
            if (wcp->wc_id == 0) {
                continue;
            }
            swqe = ch->ch_swqe + wcp->wc_id;

            switch (swqe->sw_type) {
            case SRPT_SWQE_TYPE_RESP:
                srpt_ch_rsp_comp(ch, (srpt_iu_t *)
                    swqe->sw_addr, wcp->wc_status);
                break;

            case SRPT_SWQE_TYPE_DATA:
                srpt_ch_data_comp(ch, (stmf_data_buf_t *)
                    swqe->sw_addr, wcp->wc_status);
                break;

            default:
                SRPT_DPRINTF_L2("ch_scq_hdlr, bad type(%d)",
                    swqe->sw_type);
                ASSERT(0);
            }

            srpt_ch_free_swqe_wrid(ch, wcp->wc_id);
        }
    }

    srpt_ch_release_ref(ch, 0);
}

/*
 * srpt_ch_rcq_hdlr()
 */
static void
srpt_ch_rcq_hdlr(ibt_cq_hdl_t cq_hdl, void *arg)
{
    ibt_status_t        status;
    srpt_channel_t      *ch = arg;
    ibt_wc_t        wc[SRPT_RECV_WC_POLL_SIZE];
    ibt_wc_t        *wcp;
    int         i;
    uint32_t        entries;
    srpt_iu_t       *iu;
    uint_t          cq_rearmed = 0;

    /*
     * The channel object will exists while the CQ handler call-back
     * is installed.
     */
    ASSERT(ch != NULL);
    srpt_ch_add_ref(ch);

    /*
     * If we know a channel disconnect has started do nothing
     * and let channel cleanup code recover resources from the CQ.
     * We are not concerned about races with the state transition
     * since the code will do the correct thing either way. This
     * is simply to circumvent rearming the CQ, and it will
     * catch the state next time.
     */
    rw_enter(&ch->ch_rwlock, RW_READER);
    if (ch->ch_state == SRPT_CHANNEL_DISCONNECTING) {
        SRPT_DPRINTF_L2("ch_rcq_hdlr, channel disconnecting");
        rw_exit(&ch->ch_rwlock);
        srpt_ch_release_ref(ch, 0);
        return;
    }
    rw_exit(&ch->ch_rwlock);

    for (;;) {
        status = ibt_poll_cq(cq_hdl, &wc[0], SRPT_RECV_WC_POLL_SIZE,
            &entries);
        if (status == IBT_CQ_EMPTY) {
            /*
             * OK, empty, if we have not rearmed the CQ
             * do so, and poll to eliminate race; otherwise
             * we are done.
             */
            if (cq_rearmed == 0) {
                ibt_enable_cq_notify(ch->ch_rcq_hdl,
                    IBT_NEXT_COMPLETION);
                cq_rearmed = 1;
                continue;
            } else {
                break;
            }
        } else if (status != IBT_SUCCESS) {
            /*
             * This error should not happen, it indicates something
             * abnormal has gone wrong and represents either a
             * hardware or programming logic coding error.
             */
            SRPT_DPRINTF_L2("ch_rcq_hdlr, unexpected CQ err(%d)",
                status);
            srpt_ch_disconnect(ch);
            break;
        }

        for (wcp = wc, i = 0; i < entries; i++, wcp++) {

            /*
             *  Check wc_status before proceeding.  If the
             *  status indicates a channel problem, stop processing.
             */
            if (wcp->wc_status != IBT_WC_SUCCESS) {
                if (wcp->wc_status == IBT_WC_WR_FLUSHED_ERR) {
                    SRPT_DPRINTF_L2(
                        "ch_rcq, unexpected"
                        " wc_status err(%d)",
                        wcp->wc_status);
                    srpt_ch_disconnect(ch);
                    /* XXX - verify not leaking IUs */
                    goto done;
                } else {
                    /* skip IUs with errors */
                    SRPT_DPRINTF_L2(
                        "ch_rcq, ERROR comp(%d)",
                        wcp->wc_status);
                    /* XXX - verify not leaking IUs */
                    continue;
                }
            }

            iu = (srpt_iu_t *)(uintptr_t)wcp->wc_id;
            ASSERT(iu != NULL);

            /*
             * Process the IU.
             */
            ASSERT(wcp->wc_type == IBT_WRC_RECV);
            srpt_ch_process_iu(ch, iu);
        }
    }

done:
    srpt_ch_release_ref(ch, 0);
}

/*
 * srpt_ch_srp_cmd()
 */
static int
srpt_ch_srp_cmd(srpt_channel_t *ch, srpt_iu_t *iu)
{
    srp_cmd_req_t       *cmd = (srp_cmd_req_t *)iu->iu_buf;
    srp_indirect_desc_t *i_desc;
    uint_t          i_di_cnt;
    uint_t          i_do_cnt;
    uint8_t         do_fmt;
    uint8_t         di_fmt;
    uint32_t        *cur_desc_off;
    int         i;
    ibt_status_t        status;
    uint8_t         addlen;

    iu->iu_ch  = ch;
    iu->iu_tag = cmd->cr_tag;

    /*
     * The SRP specification and SAM require support for bi-directional
     * data transfer, so we create a single buffer descriptor list that
     * in the IU buffer that covers the data-in and data-out buffers.
     * In practice we will just see unidirectional transfers with either
     * data-in or data out descriptors.  If we were to take that as fact,
     * we could reduce overhead slightly.
     */

    /*
     * additional length is a 6-bit number in 4-byte words, so multiply by 4
     * to get bytes.
     */
    addlen = cmd->cr_add_cdb_len & 0x3f;    /* mask off 6 bits */

    cur_desc_off = (uint32_t *)(void *)&cmd->cr_add_data;
    cur_desc_off  += addlen;        /* 32-bit arithmetic */
    iu->iu_num_rdescs = 0;
    iu->iu_rdescs = (srp_direct_desc_t *)(void *)cur_desc_off;

    /*
     * Examine buffer description for Data In (i.e. data flows
     * to the initiator).
     */
    i_do_cnt = i_di_cnt = 0;
    di_fmt = cmd->cr_buf_fmt >> 4;
    if (di_fmt == SRP_DATA_DESC_DIRECT) {
        iu->iu_num_rdescs = 1;
        cur_desc_off = (uint32_t *)(void *)&iu->iu_rdescs[1];
    } else if (di_fmt == SRP_DATA_DESC_INDIRECT) {
        i_desc = (srp_indirect_desc_t *)iu->iu_rdescs;
        i_di_cnt  = b2h32(i_desc->id_table.dd_len) /
            sizeof (srp_direct_desc_t);

        /*
         * Some initiators like OFED occasionally use the wrong counts,
         * so check total to allow for this.  NOTE: we do not support
         * reading of the descriptor table from the initiator, so if
         * not all descriptors are in the IU we drop the task.
         */
        if (i_di_cnt > (cmd->cr_dicnt + cmd->cr_docnt)) {
            SRPT_DPRINTF_L2("ch_srp_cmd, remote RDMA of"
                " descriptors not supported");
            SRPT_DPRINTF_L2("ch_srp_cmd, sizeof entry (%d),"
                " i_di_cnt(%d), cr_dicnt(%d)",
                (uint_t)sizeof (srp_direct_desc_t),
                i_di_cnt, cmd->cr_dicnt);
            iu->iu_rdescs = NULL;
            return (1);
        }
        bcopy(&i_desc->id_desc[0], iu->iu_rdescs,
            sizeof (srp_direct_desc_t) * i_di_cnt);
        iu->iu_num_rdescs += i_di_cnt;
        cur_desc_off = (uint32_t *)(void *)&i_desc->id_desc[i_di_cnt];
    }

    /*
     * Examine buffer description for Data Out (i.e. data flows
     * from the initiator).
     */
    do_fmt = cmd->cr_buf_fmt & 0x0F;
    if (do_fmt == SRP_DATA_DESC_DIRECT) {
        if (di_fmt == SRP_DATA_DESC_DIRECT) {
            bcopy(cur_desc_off, &iu->iu_rdescs[iu->iu_num_rdescs],
                sizeof (srp_direct_desc_t));
        }
        iu->iu_num_rdescs++;
    } else if (do_fmt == SRP_DATA_DESC_INDIRECT) {
        i_desc = (srp_indirect_desc_t *)cur_desc_off;
        i_do_cnt  = b2h32(i_desc->id_table.dd_len) /
            sizeof (srp_direct_desc_t);

        /*
         * Some initiators like OFED occasionally use the wrong counts,
         * so check total to allow for this.  NOTE: we do not support
         * reading of the descriptor table from the initiator, so if
         * not all descriptors are in the IU we drop the task.
         */
        if ((i_di_cnt + i_do_cnt) > (cmd->cr_dicnt + cmd->cr_docnt)) {
            SRPT_DPRINTF_L2("ch_srp_cmd, remote RDMA of"
                " descriptors not supported");
            SRPT_DPRINTF_L2("ch_srp_cmd, sizeof entry (%d),"
                " i_do_cnt(%d), cr_docnt(%d)",
                (uint_t)sizeof (srp_direct_desc_t),
                i_do_cnt, cmd->cr_docnt);
            iu->iu_rdescs = 0;
            return (1);
        }
        bcopy(&i_desc->id_desc[0], &iu->iu_rdescs[iu->iu_num_rdescs],
            sizeof (srp_direct_desc_t) * i_do_cnt);
        iu->iu_num_rdescs += i_do_cnt;
    }

    iu->iu_tot_xfer_len = 0;
    for (i = 0; i < iu->iu_num_rdescs; i++) {
        iu->iu_rdescs[i].dd_vaddr = b2h64(iu->iu_rdescs[i].dd_vaddr);
        iu->iu_rdescs[i].dd_hdl   = b2h32(iu->iu_rdescs[i].dd_hdl);
        iu->iu_rdescs[i].dd_len   = b2h32(iu->iu_rdescs[i].dd_len);
        iu->iu_tot_xfer_len += iu->iu_rdescs[i].dd_len;
    }

#ifdef DEBUG
    if (srpt_errlevel >= SRPT_LOG_L4) {
        SRPT_DPRINTF_L4("ch_srp_cmd, iu->iu_tot_xfer_len (%d)",
            iu->iu_tot_xfer_len);
        for (i = 0; i < iu->iu_num_rdescs; i++) {
            SRPT_DPRINTF_L4("ch_srp_cmd, rdescs[%d].dd_vaddr"
                " (0x%08llx)",
                i, (u_longlong_t)iu->iu_rdescs[i].dd_vaddr);
            SRPT_DPRINTF_L4("ch_srp_cmd, rdescs[%d].dd_hdl"
                " (0x%08x)", i, iu->iu_rdescs[i].dd_hdl);
            SRPT_DPRINTF_L4("ch_srp_cmd, rdescs[%d].dd_len (%d)",
                i, iu->iu_rdescs[i].dd_len);
        }
        SRPT_DPRINTF_L4("ch_srp_cmd, LUN (0x%08lx)",
            (unsigned long int) *((uint64_t *)(void *) cmd->cr_lun));
    }
#endif
    rw_enter(&ch->ch_rwlock, RW_READER);

    if (ch->ch_state == SRPT_CHANNEL_DISCONNECTING) {
        /*
         * The channel has begun disconnecting, so ignore the
         * the command returning the IU resources.
         */
        rw_exit(&ch->ch_rwlock);
        return (1);
    }

    /*
     * Once a SCSI task is allocated and assigned to the IU, it
     * owns those IU resources, which will be held until STMF
     * is notified the task is done (from a lport perspective).
     */
    iu->iu_stmf_task = stmf_task_alloc(ch->ch_tgt->tp_lport,
        ch->ch_session->ss_ss, cmd->cr_lun,
        SRP_CDB_SIZE + (addlen * 4), 0);
    if (iu->iu_stmf_task == NULL) {
        /*
         * Could not allocate, return status to the initiator
         * indicating that we are temporarily unable to process
         * commands.  If unable to send, immediately return IU
         * resource.
         */
        SRPT_DPRINTF_L2("ch_srp_cmd, SCSI task allocation failure");
        rw_exit(&ch->ch_rwlock);
        mutex_enter(&iu->iu_lock);
        status = srpt_stp_send_response(iu, STATUS_BUSY, 0, 0, 0,
            NULL, SRPT_NO_FENCE_SEND);
        mutex_exit(&iu->iu_lock);
        if (status != IBT_SUCCESS) {
            SRPT_DPRINTF_L2("ch_srp_cmd, error(%d) posting error"
                " response", status);
            return (1);
        } else {
            return (0);
        }
    }

    iu->iu_stmf_task->task_port_private = iu;
    iu->iu_stmf_task->task_flags = 0;

    if (di_fmt != 0) {
        iu->iu_stmf_task->task_flags |= TF_WRITE_DATA;
    }
    if (do_fmt != 0) {
        iu->iu_stmf_task->task_flags |= TF_READ_DATA;
    }

    switch (cmd->cr_task_attr) {
    case SRP_TSK_ATTR_QTYPE_SIMPLE:
        iu->iu_stmf_task->task_flags |= TF_ATTR_SIMPLE_QUEUE;
        break;

    case SRP_TSK_ATTR_QTYPE_HEAD_OF_Q:
        iu->iu_stmf_task->task_flags |= TF_ATTR_HEAD_OF_QUEUE;
        break;

    case SRP_TSK_ATTR_QTYPE_ORDERED:
        iu->iu_stmf_task->task_flags |= TF_ATTR_ORDERED_QUEUE;
        break;

    case SRP_TSK_ATTR_QTYPE_ACA_Q_TAG:
        iu->iu_stmf_task->task_flags |= TF_ATTR_ACA;
        break;

    default:
        SRPT_DPRINTF_L2("ch_srp_cmd, reserved task attr (%d)",
            cmd->cr_task_attr);
        iu->iu_stmf_task->task_flags |= TF_ATTR_ORDERED_QUEUE;
        break;
    }
    iu->iu_stmf_task->task_additional_flags = 0;
    iu->iu_stmf_task->task_priority     = 0;
    iu->iu_stmf_task->task_mgmt_function    = TM_NONE;
    iu->iu_stmf_task->task_max_nbufs    = STMF_BUFS_MAX;
    iu->iu_stmf_task->task_expected_xfer_length = iu->iu_tot_xfer_len;
    iu->iu_stmf_task->task_csn_size     = 0;

    bcopy(cmd->cr_cdb, iu->iu_stmf_task->task_cdb,
        SRP_CDB_SIZE);
    if (addlen != 0) {
        bcopy(&cmd->cr_add_data,
            iu->iu_stmf_task->task_cdb + SRP_CDB_SIZE,
            addlen * 4);
    }

    /*
     * Add the IU/task to the session and post to STMF.  The task will
     * remain in the session's list until STMF is informed by SRP that
     * it is done with the task.
     */
    srpt_stp_add_task(ch->ch_session, iu);

    SRPT_DPRINTF_L3("ch_srp_cmd, new task (%p) posted",
        (void *)iu->iu_stmf_task);
    stmf_post_task(iu->iu_stmf_task, NULL);
    rw_exit(&ch->ch_rwlock);

    return (0);
}

/*
 * srpt_ch_task_mgmt_abort()
 *
 * Returns 0 on success, indicating we've sent a management response.
 * Returns !0 to indicate failure; the IU should be reposted.
 */
static ibt_status_t
srpt_ch_task_mgmt_abort(srpt_channel_t *ch, srpt_iu_t *iu,
    uint64_t tag_to_abort)
{
    srpt_session_t  *session = ch->ch_session;
    srpt_iu_t   *ss_iu;
    ibt_status_t    status;

    /*
     * Locate the associated task (tag_to_abort) in the
     * session's active task list.
     */
    rw_enter(&session->ss_rwlock, RW_READER);
    ss_iu = list_head(&session->ss_task_list);
    while (ss_iu != NULL) {
        mutex_enter(&ss_iu->iu_lock);
        if ((tag_to_abort == ss_iu->iu_tag)) {
            mutex_exit(&ss_iu->iu_lock);
            break;
        }
        mutex_exit(&ss_iu->iu_lock);
        ss_iu = list_next(&session->ss_task_list, ss_iu);
    }
    rw_exit(&session->ss_rwlock);

    /*
     * Take appropriate action based on state of task
     * to be aborted:
     * 1) No longer exists - do nothing.
     * 2) Previously aborted or status queued - do nothing.
     * 3) Otherwise - initiate abort.
     */
    if (ss_iu == NULL)  {
        goto send_mgmt_resp;
    }

    mutex_enter(&ss_iu->iu_lock);
    if ((ss_iu->iu_flags & (SRPT_IU_STMF_ABORTING |
        SRPT_IU_ABORTED | SRPT_IU_RESP_SENT)) != 0) {
        mutex_exit(&ss_iu->iu_lock);
        goto send_mgmt_resp;
    }

    /*
     * Set aborting flag and notify STMF of abort request.  No
     * additional I/O will be queued for this IU.
     */
    SRPT_DPRINTF_L3("ch_task_mgmt_abort, task found");
    ss_iu->iu_flags |= SRPT_IU_SRP_ABORTING;
    mutex_exit(&ss_iu->iu_lock);
    stmf_abort(STMF_QUEUE_TASK_ABORT,
        ss_iu->iu_stmf_task, STMF_ABORTED, NULL);

send_mgmt_resp:
    mutex_enter(&iu->iu_lock);
    status = srpt_stp_send_mgmt_response(iu, SRP_TM_SUCCESS,
        SRPT_FENCE_SEND);
    mutex_exit(&iu->iu_lock);

    if (status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_task_mgmt_abort, err(%d)"
            " posting abort response", status);
    }

    return (status);
}

/*
 * srpt_ch_srp_task_mgmt()
 */
static int
srpt_ch_srp_task_mgmt(srpt_channel_t *ch, srpt_iu_t *iu)
{
    srp_tsk_mgmt_t      *tsk = (srp_tsk_mgmt_t *)iu->iu_buf;
    uint8_t         tm_fn;
    ibt_status_t        status;

    SRPT_DPRINTF_L3("ch_srp_task_mgmt, SRP TASK MGMT func(%d)",
        tsk->tm_function);

    iu->iu_ch  = ch;
    iu->iu_tag = tsk->tm_tag;

    /*
     * Task management aborts are processed directly by the SRP driver;
     * all other task management requests are handed off to STMF.
     */
    switch (tsk->tm_function) {
    case SRP_TSK_MGMT_ABORT_TASK:
        /*
         * Initiate SCSI transport protocol specific task abort
         * logic.
         */
        status = srpt_ch_task_mgmt_abort(ch, iu, tsk->tm_task_tag);
        if (status != IBT_SUCCESS) {
            /* repost this IU */
            return (1);
        } else {
            return (0);
        }

    case SRP_TSK_MGMT_ABORT_TASK_SET:
        tm_fn = TM_ABORT_TASK_SET;
        break;

    case SRP_TSK_MGMT_CLEAR_TASK_SET:
        tm_fn = TM_CLEAR_TASK_SET;
        break;

    case SRP_TSK_MGMT_LUN_RESET:
        tm_fn = TM_LUN_RESET;
        break;

    case SRP_TSK_MGMT_CLEAR_ACA:
        tm_fn = TM_CLEAR_ACA;
        break;

    default:
        /*
         * SRP does not support the requested task management
         * function; return a not supported status in the response.
         */
        SRPT_DPRINTF_L2("ch_srp_task_mgmt, SRP task mgmt fn(%d)"
            " not supported", tsk->tm_function);
        mutex_enter(&iu->iu_lock);
        status = srpt_stp_send_mgmt_response(iu,
            SRP_TM_NOT_SUPPORTED, SRPT_NO_FENCE_SEND);
        mutex_exit(&iu->iu_lock);
        if (status != IBT_SUCCESS) {
            SRPT_DPRINTF_L2("ch_srp_task_mgmt, err(%d) posting"
                " response", status);
            return (1);
        }
        return (0);
    }

    rw_enter(&ch->ch_rwlock, RW_READER);
    if (ch->ch_state == SRPT_CHANNEL_DISCONNECTING) {
        /*
         * The channel has begun disconnecting, so ignore the
         * the command returning the IU resources.
         */
        rw_exit(&ch->ch_rwlock);
        return (1);
    }

    /*
     * Once a SCSI mgmt task is allocated and assigned to the IU, it
     * owns those IU resources, which will be held until we inform
     * STMF that we are done with the task (from an lports perspective).
     */
    iu->iu_stmf_task = stmf_task_alloc(ch->ch_tgt->tp_lport,
        ch->ch_session->ss_ss, tsk->tm_lun, 0, STMF_TASK_EXT_NONE);
    if (iu->iu_stmf_task == NULL) {
        /*
         * Could not allocate, return status to the initiator
         * indicating that we are temporarily unable to process
         * commands.  If unable to send, immediately return IU
         * resource.
         */
        SRPT_DPRINTF_L2("ch_srp_task_mgmt, SCSI task allocation"
            " failure");
        rw_exit(&ch->ch_rwlock);
        mutex_enter(&iu->iu_lock);
        status = srpt_stp_send_response(iu, STATUS_BUSY, 0, 0, 0,
            NULL, SRPT_NO_FENCE_SEND);
        mutex_exit(&iu->iu_lock);
        if (status != IBT_SUCCESS) {
            SRPT_DPRINTF_L2("ch_srp_task_mgmt, err(%d) posting"
                "busy response", status);
            /* repost the IU */
            return (1);
        }
        return (0);
    }

    iu->iu_stmf_task->task_port_private = iu;
    iu->iu_stmf_task->task_flags = 0;
    iu->iu_stmf_task->task_additional_flags =
        TASK_AF_NO_EXPECTED_XFER_LENGTH;
    iu->iu_stmf_task->task_priority = 0;
    iu->iu_stmf_task->task_mgmt_function = tm_fn;
    iu->iu_stmf_task->task_max_nbufs = STMF_BUFS_MAX;
    iu->iu_stmf_task->task_expected_xfer_length = 0;
    iu->iu_stmf_task->task_csn_size = 0;

    /*
     * Add the IU/task to the session and post to STMF.  The task will
     * remain in the session's list until STMF is informed by SRP that
     * it is done with the task.
     */
    srpt_stp_add_task(ch->ch_session, iu);

    SRPT_DPRINTF_L3("ch_srp_task_mgmt, new mgmt task(%p) posted",
        (void *)iu->iu_stmf_task);
    stmf_post_task(iu->iu_stmf_task, NULL);
    rw_exit(&ch->ch_rwlock);

    return (0);
}

/*
 * srpt_ch_process_iu()
 */
static void
srpt_ch_process_iu(srpt_channel_t *ch, srpt_iu_t *iu)
{
    srpt_iu_data_t  *iud;
    int     status = 1;

    /*
     * IU adds reference to channel which will represent a
     * a reference by STMF.  If for whatever reason the IU
     * is not handed off to STMF, then this reference will be
     * released.  Otherwise, the reference will be released when
     * SRP informs STMF that the associated SCSI task is done.
     */
    srpt_ch_add_ref(ch);

    /*
     * Validate login RC channel state. Normally active, if
     * not active then we need to handle a possible race between the
     * receipt of a implied RTU and CM calling back to notify of the
     * state transition.
     */
    rw_enter(&ch->ch_rwlock, RW_READER);
    if (ch->ch_state == SRPT_CHANNEL_DISCONNECTING) {
        rw_exit(&ch->ch_rwlock);
        goto repost_iu;
    }
    rw_exit(&ch->ch_rwlock);

    iud = iu->iu_buf;

    switch (iud->rx_iu.srp_op) {
    case SRP_IU_CMD:
        status = srpt_ch_srp_cmd(ch, iu);
        break;

    case SRP_IU_TASK_MGMT:
        status = srpt_ch_srp_task_mgmt(ch, iu);
        return;

    case SRP_IU_I_LOGOUT:
        SRPT_DPRINTF_L3("ch_process_iu, SRP INITIATOR LOGOUT");
        /*
         * Initiators should logout by issuing a CM disconnect
         * request (DREQ) with the logout IU in the private data;
         * however some initiators have been known to send the
         * IU in-band, if this happens just initiate the logout.
         * Note that we do not return a response as per the
         * specification.
         */
        srpt_stp_logout(ch);
        break;

    case SRP_IU_AER_RSP:
    case SRP_IU_CRED_RSP:
    default:
        /*
         * We don't send asynchronous events or ask for credit
         * adjustments, so nothing need be done.  Log we got an
         * unexpected IU but then just repost the IU to the SRQ.
         */
        SRPT_DPRINTF_L2("ch_process_iu, invalid IU from initiator,"
            " IU opcode(%d)", iud->rx_iu.srp_op);
        break;
    }

    if (status == 0) {
        return;
    }

repost_iu:
    SRPT_DPRINTF_L4("process_iu:  reposting iu %p", (void *)iu);
    mutex_enter(&iu->iu_lock);
    srpt_ioc_repost_recv_iu(iu->iu_ioc, iu);
    mutex_exit(&iu->iu_lock);
    srpt_ch_release_ref(ch, 0);
}

/*
 * srpt_ch_post_send
 */
ibt_status_t
srpt_ch_post_send(srpt_channel_t *ch, srpt_iu_t *iu, uint32_t len,
    uint_t fence)
{
    ibt_status_t        status;
    ibt_send_wr_t       wr;
    ibt_wr_ds_t     ds;
    uint_t          posted;

    ASSERT(ch != NULL);
    ASSERT(iu != NULL);
    ASSERT(mutex_owned(&iu->iu_lock));

    rw_enter(&ch->ch_rwlock, RW_READER);
    if (ch->ch_state == SRPT_CHANNEL_DISCONNECTING) {
        rw_exit(&ch->ch_rwlock);
        SRPT_DPRINTF_L2("ch_post_send, bad ch state (%d)",
            ch->ch_state);
        return (IBT_FAILURE);
    }
    rw_exit(&ch->ch_rwlock);

    wr.wr_id = srpt_ch_alloc_swqe_wrid(ch, SRPT_SWQE_TYPE_RESP,
        (void *)iu);
    if (wr.wr_id == 0) {
        SRPT_DPRINTF_L2("ch_post_send, queue full");
        return (IBT_FAILURE);
    }

    atomic_inc_32(&iu->iu_sq_posted_cnt);

    wr.wr_flags = IBT_WR_SEND_SIGNAL;
    if (fence == SRPT_FENCE_SEND) {
        wr.wr_flags |= IBT_WR_SEND_FENCE;
    }
    wr.wr_opcode = IBT_WRC_SEND;
    wr.wr_trans  = IBT_RC_SRV;
    wr.wr_nds = 1;
    wr.wr_sgl = &ds;

    ds.ds_va = iu->iu_sge.ds_va;
    ds.ds_key = iu->iu_sge.ds_key;
    ds.ds_len = len;

    SRPT_DPRINTF_L4("ch_post_send, posting SRP response to channel"
        " ds.ds_va (0x%16llx), ds.ds_key (0x%08x), "
        " ds.ds_len (%d)",
        (u_longlong_t)ds.ds_va, ds.ds_key, ds.ds_len);

    status = ibt_post_send(ch->ch_chan_hdl, &wr, 1, &posted);
    if (status != IBT_SUCCESS) {
        SRPT_DPRINTF_L2("ch_post_send, post_send failed (%d)",
            status);
        atomic_dec_32(&iu->iu_sq_posted_cnt);
        srpt_ch_free_swqe_wrid(ch, wr.wr_id);
        return (status);
    }

    return (IBT_SUCCESS);
}

/*
 * srpt_ch_alloc_swqe_wrid()
 */
ibt_wrid_t
srpt_ch_alloc_swqe_wrid(srpt_channel_t *ch,
    srpt_swqe_type_t wqe_type, void *addr)
{
    ibt_wrid_t  wrid;

    mutex_enter(&ch->ch_swqe_lock);
    if (ch->ch_head == ch->ch_tail) {
        mutex_exit(&ch->ch_swqe_lock);
        return ((ibt_wrid_t)0);
    }
    wrid = (ibt_wrid_t)ch->ch_head;
    ch->ch_swqe[ch->ch_head].sw_type = wqe_type;
    ch->ch_swqe[ch->ch_head].sw_addr = addr;
    ch->ch_head = ch->ch_swqe[ch->ch_head].sw_next;
    ch->ch_swqe_posted++;
    mutex_exit(&ch->ch_swqe_lock);
    return (wrid);
}

/*
 * srpt_ch_free_swqe_wrid()
 */
void
srpt_ch_free_swqe_wrid(srpt_channel_t *ch, ibt_wrid_t id)
{
    mutex_enter(&ch->ch_swqe_lock);
    ch->ch_swqe[ch->ch_tail].sw_next = id;
    ch->ch_tail = (uint32_t)id;
    ch->ch_swqe_posted--;
    mutex_exit(&ch->ch_swqe_lock);
}