arn_main.c revision 0dc2366f7b9f9f36e10909b1e95edbf2a261c2ac
/*
* Copyright 2010 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/*
* Copyright (c) 2008 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/param.h>
#include <sys/types.h>
#include <sys/signal.h>
#include <sys/stream.h>
#include <sys/termio.h>
#include <sys/errno.h>
#include <sys/file.h>
#include <sys/cmn_err.h>
#include <sys/stropts.h>
#include <sys/strsubr.h>
#include <sys/strtty.h>
#include <sys/kbio.h>
#include <sys/cred.h>
#include <sys/stat.h>
#include <sys/consdev.h>
#include <sys/kmem.h>
#include <sys/modctl.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/pci.h>
#include <sys/errno.h>
#include <sys/mac_provider.h>
#include <sys/dlpi.h>
#include <sys/ethernet.h>
#include <sys/list.h>
#include <sys/byteorder.h>
#include <sys/strsun.h>
#include <sys/policy.h>
#include <inet/common.h>
#include <inet/nd.h>
#include <inet/mi.h>
#include <inet/wifi_ioctl.h>
#include <sys/mac_wifi.h>
#include <sys/net80211.h>
#include <sys/net80211_proto.h>
#include <sys/net80211_ht.h>
#include "arn_ath9k.h"
#include "arn_core.h"
#include "arn_reg.h"
#include "arn_hw.h"
#define ARN_MAX_RSSI 45 /* max rssi */
/*
* Default 11n reates supported by this station.
*/
extern struct ieee80211_htrateset ieee80211_rateset_11n;
/*
* PIO access attributes for registers
*/
static ddi_device_acc_attr_t arn_reg_accattr = {
DDI_DEVICE_ATTR_V0,
DDI_STRUCTURE_LE_ACC,
DDI_STRICTORDER_ACC,
DDI_DEFAULT_ACC
};
/*
* DMA access attributes for descriptors: NOT to be byte swapped.
*/
static ddi_device_acc_attr_t arn_desc_accattr = {
DDI_DEVICE_ATTR_V0,
DDI_STRUCTURE_LE_ACC,
DDI_STRICTORDER_ACC,
DDI_DEFAULT_ACC
};
/*
* Describes the chip's DMA engine
*/
static ddi_dma_attr_t arn_dma_attr = {
DMA_ATTR_V0, /* version number */
0, /* low address */
0xffffffffU, /* high address */
0x3ffffU, /* counter register max */
1, /* alignment */
0xFFF, /* burst sizes */
1, /* minimum transfer size */
0x3ffffU, /* max transfer size */
0xffffffffU, /* address register max */
1, /* no scatter-gather */
1, /* granularity of device */
0, /* DMA flags */
};
static ddi_dma_attr_t arn_desc_dma_attr = {
DMA_ATTR_V0, /* version number */
0, /* low address */
0xffffffffU, /* high address */
0xffffffffU, /* counter register max */
0x1000, /* alignment */
0xFFF, /* burst sizes */
1, /* minimum transfer size */
0xffffffffU, /* max transfer size */
0xffffffffU, /* address register max */
1, /* no scatter-gather */
1, /* granularity of device */
0, /* DMA flags */
};
#define ATH_DEF_CACHE_BYTES 32 /* default cache line size */
static kmutex_t arn_loglock;
static void *arn_soft_state_p = NULL;
static int arn_dwelltime = 200; /* scan interval */
static int arn_m_stat(void *, uint_t, uint64_t *);
static int arn_m_start(void *);
static void arn_m_stop(void *);
static int arn_m_promisc(void *, boolean_t);
static int arn_m_multicst(void *, boolean_t, const uint8_t *);
static int arn_m_unicst(void *, const uint8_t *);
static mblk_t *arn_m_tx(void *, mblk_t *);
static void arn_m_ioctl(void *, queue_t *, mblk_t *);
static int arn_m_setprop(void *, const char *, mac_prop_id_t,
uint_t, const void *);
static int arn_m_getprop(void *, const char *, mac_prop_id_t,
uint_t, void *);
static void arn_m_propinfo(void *, const char *, mac_prop_id_t,
mac_prop_info_handle_t);
/* MAC Callcack Functions */
static mac_callbacks_t arn_m_callbacks = {
MC_IOCTL | MC_SETPROP | MC_GETPROP | MC_PROPINFO,
arn_m_stat,
arn_m_start,
arn_m_stop,
arn_m_promisc,
arn_m_multicst,
arn_m_unicst,
arn_m_tx,
NULL,
arn_m_ioctl,
NULL,
NULL,
NULL,
arn_m_setprop,
arn_m_getprop,
arn_m_propinfo
};
/*
* ARN_DBG_HW
* ARN_DBG_REG_IO
* ARN_DBG_QUEUE
* ARN_DBG_EEPROM
* ARN_DBG_XMIT
* ARN_DBG_RECV
* ARN_DBG_CALIBRATE
* ARN_DBG_CHANNEL
* ARN_DBG_INTERRUPT
* ARN_DBG_REGULATORY
* ARN_DBG_ANI
* ARN_DBG_POWER_MGMT
* ARN_DBG_KEYCACHE
* ARN_DBG_BEACON
* ARN_DBG_RATE
* ARN_DBG_INIT
* ARN_DBG_ATTACH
* ARN_DBG_DEATCH
* ARN_DBG_AGGR
* ARN_DBG_RESET
* ARN_DBG_FATAL
* ARN_DBG_ANY
* ARN_DBG_ALL
*/
uint32_t arn_dbg_mask = 0;
/*
* Exception/warning cases not leading to panic.
*/
void
arn_problem(const int8_t *fmt, ...)
{
va_list args;
mutex_enter(&arn_loglock);
va_start(args, fmt);
vcmn_err(CE_WARN, fmt, args);
va_end(args);
mutex_exit(&arn_loglock);
}
/*
* Normal log information independent of debug.
*/
void
arn_log(const int8_t *fmt, ...)
{
va_list args;
mutex_enter(&arn_loglock);
va_start(args, fmt);
vcmn_err(CE_CONT, fmt, args);
va_end(args);
mutex_exit(&arn_loglock);
}
void
arn_dbg(uint32_t dbg_flags, const int8_t *fmt, ...)
{
va_list args;
if (dbg_flags & arn_dbg_mask) {
mutex_enter(&arn_loglock);
va_start(args, fmt);
vcmn_err(CE_CONT, fmt, args);
va_end(args);
mutex_exit(&arn_loglock);
}
}
/*
* Read and write, they both share the same lock. We do this to serialize
* reads and writes on Atheros 802.11n PCI devices only. This is required
* as the FIFO on these devices can only accept sanely 2 requests. After
* that the device goes bananas. Serializing the reads/writes prevents this
* from happening.
*/
void
arn_iowrite32(struct ath_hal *ah, uint32_t reg_offset, uint32_t val)
{
struct arn_softc *sc = ah->ah_sc;
if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
mutex_enter(&sc->sc_serial_rw);
ddi_put32(sc->sc_io_handle,
(uint32_t *)((uintptr_t)(sc->mem) + (reg_offset)), val);
mutex_exit(&sc->sc_serial_rw);
} else {
ddi_put32(sc->sc_io_handle,
(uint32_t *)((uintptr_t)(sc->mem) + (reg_offset)), val);
}
}
unsigned int
arn_ioread32(struct ath_hal *ah, uint32_t reg_offset)
{
uint32_t val;
struct arn_softc *sc = ah->ah_sc;
if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
mutex_enter(&sc->sc_serial_rw);
val = ddi_get32(sc->sc_io_handle,
(uint32_t *)((uintptr_t)(sc->mem) + (reg_offset)));
mutex_exit(&sc->sc_serial_rw);
} else {
val = ddi_get32(sc->sc_io_handle,
(uint32_t *)((uintptr_t)(sc->mem) + (reg_offset)));
}
return (val);
}
/*
* Allocate an area of memory and a DMA handle for accessing it
*/
static int
arn_alloc_dma_mem(dev_info_t *devinfo, ddi_dma_attr_t *dma_attr, size_t memsize,
ddi_device_acc_attr_t *attr_p, uint_t alloc_flags,
uint_t bind_flags, dma_area_t *dma_p)
{
int err;
/*
* Allocate handle
*/
err = ddi_dma_alloc_handle(devinfo, dma_attr,
DDI_DMA_SLEEP, NULL, &dma_p->dma_hdl);
if (err != DDI_SUCCESS)
return (DDI_FAILURE);
/*
* Allocate memory
*/
err = ddi_dma_mem_alloc(dma_p->dma_hdl, memsize, attr_p,
alloc_flags, DDI_DMA_SLEEP, NULL, &dma_p->mem_va,
&dma_p->alength, &dma_p->acc_hdl);
if (err != DDI_SUCCESS)
return (DDI_FAILURE);
/*
* Bind the two together
*/
err = ddi_dma_addr_bind_handle(dma_p->dma_hdl, NULL,
dma_p->mem_va, dma_p->alength, bind_flags,
DDI_DMA_SLEEP, NULL, &dma_p->cookie, &dma_p->ncookies);
if (err != DDI_DMA_MAPPED)
return (DDI_FAILURE);
dma_p->nslots = ~0U;
dma_p->size = ~0U;
dma_p->token = ~0U;
dma_p->offset = 0;
return (DDI_SUCCESS);
}
/*
* Free one allocated area of DMAable memory
*/
static void
arn_free_dma_mem(dma_area_t *dma_p)
{
if (dma_p->dma_hdl != NULL) {
(void) ddi_dma_unbind_handle(dma_p->dma_hdl);
if (dma_p->acc_hdl != NULL) {
ddi_dma_mem_free(&dma_p->acc_hdl);
dma_p->acc_hdl = NULL;
}
ddi_dma_free_handle(&dma_p->dma_hdl);
dma_p->ncookies = 0;
dma_p->dma_hdl = NULL;
}
}
/*
* Initialize tx, rx. or beacon buffer list. Allocate DMA memory for
* each buffer.
*/
static int
arn_buflist_setup(dev_info_t *devinfo,
struct arn_softc *sc,
list_t *bflist,
struct ath_buf **pbf,
struct ath_desc **pds,
int nbuf,
uint_t dmabflags,
uint32_t buflen)
{
int i, err;
struct ath_buf *bf = *pbf;
struct ath_desc *ds = *pds;
list_create(bflist, sizeof (struct ath_buf),
offsetof(struct ath_buf, bf_node));
for (i = 0; i < nbuf; i++, bf++, ds++) {
bf->bf_desc = ds;
bf->bf_daddr = sc->sc_desc_dma.cookie.dmac_address +
((uintptr_t)ds - (uintptr_t)sc->sc_desc);
list_insert_tail(bflist, bf);
/* alloc DMA memory */
err = arn_alloc_dma_mem(devinfo, &arn_dma_attr,
buflen, &arn_desc_accattr, DDI_DMA_STREAMING,
dmabflags, &bf->bf_dma);
if (err != DDI_SUCCESS)
return (err);
}
*pbf = bf;
*pds = ds;
return (DDI_SUCCESS);
}
/*
* Destroy tx, rx or beacon buffer list. Free DMA memory.
*/
static void
arn_buflist_cleanup(list_t *buflist)
{
struct ath_buf *bf;
if (!buflist)
return;
bf = list_head(buflist);
while (bf != NULL) {
if (bf->bf_m != NULL) {
freemsg(bf->bf_m);
bf->bf_m = NULL;
}
/* Free DMA buffer */
arn_free_dma_mem(&bf->bf_dma);
if (bf->bf_in != NULL) {
ieee80211_free_node(bf->bf_in);
bf->bf_in = NULL;
}
list_remove(buflist, bf);
bf = list_head(buflist);
}
list_destroy(buflist);
}
static void
arn_desc_free(struct arn_softc *sc)
{
arn_buflist_cleanup(&sc->sc_txbuf_list);
arn_buflist_cleanup(&sc->sc_rxbuf_list);
#ifdef ARN_IBSS
arn_buflist_cleanup(&sc->sc_bcbuf_list);
#endif
/* Free descriptor DMA buffer */
arn_free_dma_mem(&sc->sc_desc_dma);
kmem_free((void *)sc->sc_vbufptr, sc->sc_vbuflen);
sc->sc_vbufptr = NULL;
}
static int
arn_desc_alloc(dev_info_t *devinfo, struct arn_softc *sc)
{
int err;
size_t size;
struct ath_desc *ds;
struct ath_buf *bf;
#ifdef ARN_IBSS
size = sizeof (struct ath_desc) * (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF);
#else
size = sizeof (struct ath_desc) * (ATH_TXBUF + ATH_RXBUF);
#endif
err = arn_alloc_dma_mem(devinfo, &arn_desc_dma_attr, size,
&arn_desc_accattr, DDI_DMA_CONSISTENT,
DDI_DMA_RDWR | DDI_DMA_CONSISTENT, &sc->sc_desc_dma);
/* virtual address of the first descriptor */
sc->sc_desc = (struct ath_desc *)sc->sc_desc_dma.mem_va;
ds = sc->sc_desc;
ARN_DBG((ARN_DBG_INIT, "arn: arn_desc_alloc(): DMA map: "
"%p (%d) -> %p\n",
sc->sc_desc, sc->sc_desc_dma.alength,
sc->sc_desc_dma.cookie.dmac_address));
/* allocate data structures to describe TX/RX DMA buffers */
#ifdef ARN_IBSS
sc->sc_vbuflen = sizeof (struct ath_buf) * (ATH_TXBUF + ATH_RXBUF +
ATH_BCBUF);
#else
sc->sc_vbuflen = sizeof (struct ath_buf) * (ATH_TXBUF + ATH_RXBUF);
#endif
bf = (struct ath_buf *)kmem_zalloc(sc->sc_vbuflen, KM_SLEEP);
sc->sc_vbufptr = bf;
/* DMA buffer size for each TX/RX packet */
#ifdef ARN_TX_AGGREGRATION
sc->tx_dmabuf_size =
roundup((IEEE80211_MAX_MPDU_LEN + 3840 * 2),
min(sc->sc_cachelsz, (uint16_t)64));
#else
sc->tx_dmabuf_size =
roundup(IEEE80211_MAX_MPDU_LEN, min(sc->sc_cachelsz, (uint16_t)64));
#endif
sc->rx_dmabuf_size =
roundup(IEEE80211_MAX_MPDU_LEN, min(sc->sc_cachelsz, (uint16_t)64));
/* create RX buffer list */
err = arn_buflist_setup(devinfo, sc, &sc->sc_rxbuf_list, &bf, &ds,
ATH_RXBUF, DDI_DMA_READ | DDI_DMA_STREAMING, sc->rx_dmabuf_size);
if (err != DDI_SUCCESS) {
arn_desc_free(sc);
return (err);
}
/* create TX buffer list */
err = arn_buflist_setup(devinfo, sc, &sc->sc_txbuf_list, &bf, &ds,
ATH_TXBUF, DDI_DMA_STREAMING, sc->tx_dmabuf_size);
if (err != DDI_SUCCESS) {
arn_desc_free(sc);
return (err);
}
/* create beacon buffer list */
#ifdef ARN_IBSS
err = arn_buflist_setup(devinfo, sc, &sc->sc_bcbuf_list, &bf, &ds,
ATH_BCBUF, DDI_DMA_STREAMING);
if (err != DDI_SUCCESS) {
arn_desc_free(sc);
return (err);
}
#endif
return (DDI_SUCCESS);
}
static struct ath_rate_table *
/* LINTED E_STATIC_UNUSED */
arn_get_ratetable(struct arn_softc *sc, uint32_t mode)
{
struct ath_rate_table *rate_table = NULL;
switch (mode) {
case IEEE80211_MODE_11A:
rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
break;
case IEEE80211_MODE_11B:
rate_table = sc->hw_rate_table[ATH9K_MODE_11B];
break;
case IEEE80211_MODE_11G:
rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
break;
#ifdef ARB_11N
case IEEE80211_MODE_11NA_HT20:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
break;
case IEEE80211_MODE_11NG_HT20:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
break;
case IEEE80211_MODE_11NA_HT40PLUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
break;
case IEEE80211_MODE_11NA_HT40MINUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
break;
case IEEE80211_MODE_11NG_HT40PLUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
break;
case IEEE80211_MODE_11NG_HT40MINUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
break;
#endif
default:
ARN_DBG((ARN_DBG_FATAL, "arn: arn_get_ratetable(): "
"invalid mode %u\n", mode));
return (NULL);
}
return (rate_table);
}
static void
arn_setcurmode(struct arn_softc *sc, enum wireless_mode mode)
{
struct ath_rate_table *rt;
int i;
for (i = 0; i < sizeof (sc->asc_rixmap); i++)
sc->asc_rixmap[i] = 0xff;
rt = sc->hw_rate_table[mode];
ASSERT(rt != NULL);
for (i = 0; i < rt->rate_cnt; i++)
sc->asc_rixmap[rt->info[i].dot11rate &
IEEE80211_RATE_VAL] = (uint8_t)i; /* LINT */
sc->sc_currates = rt;
sc->sc_curmode = mode;
/*
* All protection frames are transmited at 2Mb/s for
* 11g, otherwise at 1Mb/s.
* XXX select protection rate index from rate table.
*/
sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0);
}
static enum wireless_mode
arn_chan2mode(struct ath9k_channel *chan)
{
if (chan->chanmode == CHANNEL_A)
return (ATH9K_MODE_11A);
else if (chan->chanmode == CHANNEL_G)
return (ATH9K_MODE_11G);
else if (chan->chanmode == CHANNEL_B)
return (ATH9K_MODE_11B);
else if (chan->chanmode == CHANNEL_A_HT20)
return (ATH9K_MODE_11NA_HT20);
else if (chan->chanmode == CHANNEL_G_HT20)
return (ATH9K_MODE_11NG_HT20);
else if (chan->chanmode == CHANNEL_A_HT40PLUS)
return (ATH9K_MODE_11NA_HT40PLUS);
else if (chan->chanmode == CHANNEL_A_HT40MINUS)
return (ATH9K_MODE_11NA_HT40MINUS);
else if (chan->chanmode == CHANNEL_G_HT40PLUS)
return (ATH9K_MODE_11NG_HT40PLUS);
else if (chan->chanmode == CHANNEL_G_HT40MINUS)
return (ATH9K_MODE_11NG_HT40MINUS);
return (ATH9K_MODE_11B);
}
static void
arn_update_txpow(struct arn_softc *sc)
{
struct ath_hal *ah = sc->sc_ah;
uint32_t txpow;
if (sc->sc_curtxpow != sc->sc_config.txpowlimit) {
(void) ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit);
/* read back in case value is clamped */
(void) ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
sc->sc_curtxpow = (uint32_t)txpow;
}
}
uint8_t
parse_mpdudensity(uint8_t mpdudensity)
{
/*
* 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
* 0 for no restriction
* 1 for 1/4 us
* 2 for 1/2 us
* 3 for 1 us
* 4 for 2 us
* 5 for 4 us
* 6 for 8 us
* 7 for 16 us
*/
switch (mpdudensity) {
case 0:
return (0);
case 1:
case 2:
case 3:
/*
* Our lower layer calculations limit our
* precision to 1 microsecond
*/
return (1);
case 4:
return (2);
case 5:
return (4);
case 6:
return (8);
case 7:
return (16);
default:
return (0);
}
}
static void
arn_setup_rates(struct arn_softc *sc, uint32_t mode)
{
int i, maxrates;
struct ath_rate_table *rate_table = NULL;
struct ieee80211_rateset *rateset;
ieee80211com_t *ic = (ieee80211com_t *)sc;
/* rate_table = arn_get_ratetable(sc, mode); */
switch (mode) {
case IEEE80211_MODE_11A:
rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
break;
case IEEE80211_MODE_11B:
rate_table = sc->hw_rate_table[ATH9K_MODE_11B];
break;
case IEEE80211_MODE_11G:
rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
break;
#ifdef ARN_11N
case IEEE80211_MODE_11NA_HT20:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
break;
case IEEE80211_MODE_11NG_HT20:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
break;
case IEEE80211_MODE_11NA_HT40PLUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
break;
case IEEE80211_MODE_11NA_HT40MINUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
break;
case IEEE80211_MODE_11NG_HT40PLUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
break;
case IEEE80211_MODE_11NG_HT40MINUS:
rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
break;
#endif
default:
ARN_DBG((ARN_DBG_RATE, "arn: arn_get_ratetable(): "
"invalid mode %u\n", mode));
break;
}
if (rate_table == NULL)
return;
if (rate_table->rate_cnt > ATH_RATE_MAX) {
ARN_DBG((ARN_DBG_RATE, "arn: arn_rate_setup(): "
"rate table too small (%u > %u)\n",
rate_table->rate_cnt, IEEE80211_RATE_MAXSIZE));
maxrates = ATH_RATE_MAX;
} else
maxrates = rate_table->rate_cnt;
ARN_DBG((ARN_DBG_RATE, "arn: arn_rate_setup(): "
"maxrates is %d\n", maxrates));
rateset = &ic->ic_sup_rates[mode];
for (i = 0; i < maxrates; i++) {
rateset->ir_rates[i] = rate_table->info[i].dot11rate;
ARN_DBG((ARN_DBG_RATE, "arn: arn_rate_setup(): "
"%d\n", rate_table->info[i].dot11rate));
}
rateset->ir_nrates = (uint8_t)maxrates; /* ??? */
}
static int
arn_setup_channels(struct arn_softc *sc)
{
struct ath_hal *ah = sc->sc_ah;
ieee80211com_t *ic = (ieee80211com_t *)sc;
int nchan, i, index;
uint8_t regclassids[ATH_REGCLASSIDS_MAX];
uint32_t nregclass = 0;
struct ath9k_channel *c;
/* Fill in ah->ah_channels */
if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (uint32_t *)&nchan,
regclassids, ATH_REGCLASSIDS_MAX, &nregclass, CTRY_DEFAULT,
B_FALSE, 1)) {
uint32_t rd = ah->ah_currentRD;
ARN_DBG((ARN_DBG_CHANNEL, "arn: arn_setup_channels(): "
"unable to collect channel list; "
"regdomain likely %u country code %u\n",
rd, CTRY_DEFAULT));
return (EINVAL);
}
ARN_DBG((ARN_DBG_CHANNEL, "arn: arn_setup_channels(): "
"number of channel is %d\n", nchan));
for (i = 0; i < nchan; i++) {
c = &ah->ah_channels[i];
uint32_t flags;
index = ath9k_hw_mhz2ieee(ah, c->channel, c->channelFlags);
if (index > IEEE80211_CHAN_MAX) {
ARN_DBG((ARN_DBG_CHANNEL,
"arn: arn_setup_channels(): "
"bad hal channel %d (%u/%x) ignored\n",
index, c->channel, c->channelFlags));
continue;
}
/* NB: flags are known to be compatible */
if (index < 0) {
/*
* can't handle frequency <2400MHz (negative
* channels) right now
*/
ARN_DBG((ARN_DBG_CHANNEL,
"arn: arn_setup_channels(): "
"hal channel %d (%u/%x) "
"cannot be handled, ignored\n",
index, c->channel, c->channelFlags));
continue;
}
/*
* Calculate net80211 flags; most are compatible
* but some need massaging. Note the static turbo
* conversion can be removed once net80211 is updated
* to understand static vs. dynamic turbo.
*/
flags = c->channelFlags & (CHANNEL_ALL | CHANNEL_PASSIVE);
if (ic->ic_sup_channels[index].ich_freq == 0) {
ic->ic_sup_channels[index].ich_freq = c->channel;
ic->ic_sup_channels[index].ich_flags = flags;
} else {
/* channels overlap; e.g. 11g and 11b */
ic->ic_sup_channels[index].ich_flags |= flags;
}
if ((c->channelFlags & CHANNEL_G) == CHANNEL_G) {
sc->sc_have11g = 1;
ic->ic_caps |= IEEE80211_C_SHPREAMBLE |
IEEE80211_C_SHSLOT; /* short slot time */
}
}
return (0);
}
uint32_t
arn_chan2flags(ieee80211com_t *isc, struct ieee80211_channel *chan)
{
uint32_t channel_mode;
switch (ieee80211_chan2mode(isc, chan)) {
case IEEE80211_MODE_11NA:
if (chan->ich_flags & IEEE80211_CHAN_HT40U)
channel_mode = CHANNEL_A_HT40PLUS;
else if (chan->ich_flags & IEEE80211_CHAN_HT40D)
channel_mode = CHANNEL_A_HT40MINUS;
else
channel_mode = CHANNEL_A_HT20;
break;
case IEEE80211_MODE_11NG:
if (chan->ich_flags & IEEE80211_CHAN_HT40U)
channel_mode = CHANNEL_G_HT40PLUS;
else if (chan->ich_flags & IEEE80211_CHAN_HT40D)
channel_mode = CHANNEL_G_HT40MINUS;
else
channel_mode = CHANNEL_G_HT20;
break;
case IEEE80211_MODE_TURBO_G:
case IEEE80211_MODE_STURBO_A:
case IEEE80211_MODE_TURBO_A:
channel_mode = 0;
break;
case IEEE80211_MODE_11A:
channel_mode = CHANNEL_A;
break;
case IEEE80211_MODE_11G:
channel_mode = CHANNEL_B;
break;
case IEEE80211_MODE_11B:
channel_mode = CHANNEL_G;
break;
case IEEE80211_MODE_FH:
channel_mode = 0;
break;
default:
break;
}
return (channel_mode);
}
/*
* Update internal state after a channel change.
*/
void
arn_chan_change(struct arn_softc *sc, struct ieee80211_channel *chan)
{
struct ieee80211com *ic = &sc->sc_isc;
enum ieee80211_phymode mode;
enum wireless_mode wlmode;
/*
* Change channels and update the h/w rate map
* if we're switching; e.g. 11a to 11b/g.
*/
mode = ieee80211_chan2mode(ic, chan);
switch (mode) {
case IEEE80211_MODE_11A:
wlmode = ATH9K_MODE_11A;
break;
case IEEE80211_MODE_11B:
wlmode = ATH9K_MODE_11B;
break;
case IEEE80211_MODE_11G:
wlmode = ATH9K_MODE_11B;
break;
default:
break;
}
if (wlmode != sc->sc_curmode)
arn_setcurmode(sc, wlmode);
}
/*
* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
static int
arn_set_channel(struct arn_softc *sc, struct ath9k_channel *hchan)
{
struct ath_hal *ah = sc->sc_ah;
ieee80211com_t *ic = &sc->sc_isc;
boolean_t fastcc = B_TRUE;
boolean_t stopped;
struct ieee80211_channel chan;
enum wireless_mode curmode;
if (sc->sc_flags & SC_OP_INVALID)
return (EIO);
if (hchan->channel != sc->sc_ah->ah_curchan->channel ||
hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags ||
(sc->sc_flags & SC_OP_CHAINMASK_UPDATE) ||
(sc->sc_flags & SC_OP_FULL_RESET)) {
int status;
/*
* This is only performed if the channel settings have
* actually changed.
*
* To switch channels clear any pending DMA operations;
* wait long enough for the RX fifo to drain, reset the
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
(void) ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */
arn_draintxq(sc, B_FALSE); /* clear pending tx frames */
stopped = arn_stoprecv(sc); /* turn off frame recv */
/*
* XXX: do not flush receive queue here. We don't want
* to flush data frames already in queue because of
* changing channel.
*/
if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
fastcc = B_FALSE;
ARN_DBG((ARN_DBG_CHANNEL, "arn: arn_set_channel(): "
"(%u MHz) -> (%u MHz), cflags:%x, chanwidth: %d\n",
sc->sc_ah->ah_curchan->channel,
hchan->channel, hchan->channelFlags, sc->tx_chan_width));
if (!ath9k_hw_reset(ah, hchan, sc->tx_chan_width,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, fastcc, &status)) {
ARN_DBG((ARN_DBG_FATAL, "arn: arn_set_channel(): "
"unable to reset channel %u (%uMhz) "
"flags 0x%x hal status %u\n",
ath9k_hw_mhz2ieee(ah, hchan->channel,
hchan->channelFlags),
hchan->channel, hchan->channelFlags, status));
return (EIO);
}
sc->sc_curchan = *hchan;
sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
sc->sc_flags &= ~SC_OP_FULL_RESET;
if (arn_startrecv(sc) != 0) {
arn_problem("arn: arn_set_channel(): "
"unable to restart recv logic\n");
return (EIO);
}
chan.ich_freq = hchan->channel;
chan.ich_flags = hchan->channelFlags;
ic->ic_ibss_chan = &chan;
/*
* Change channels and update the h/w rate map
* if we're switching; e.g. 11a to 11b/g.
*/
curmode = arn_chan2mode(hchan);
if (curmode != sc->sc_curmode)
arn_setcurmode(sc, arn_chan2mode(hchan));
arn_update_txpow(sc);
(void) ath9k_hw_set_interrupts(ah, sc->sc_imask);
}
return (0);
}
/*
* This routine performs the periodic noise floor calibration function
* that is used to adjust and optimize the chip performance. This
* takes environmental changes (location, temperature) into account.
* When the task is complete, it reschedules itself depending on the
* appropriate interval that was calculated.
*/
static void
arn_ani_calibrate(void *arg)
{
ieee80211com_t *ic = (ieee80211com_t *)arg;
struct arn_softc *sc = (struct arn_softc *)ic;
struct ath_hal *ah = sc->sc_ah;
boolean_t longcal = B_FALSE;
boolean_t shortcal = B_FALSE;
boolean_t aniflag = B_FALSE;
unsigned int timestamp = drv_hztousec(ddi_get_lbolt())/1000;
uint32_t cal_interval;
/*
* don't calibrate when we're scanning.
* we are most likely not on our home channel.
*/
if (ic->ic_state != IEEE80211_S_RUN)
goto settimer;
/* Long calibration runs independently of short calibration. */
if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) {
longcal = B_TRUE;
ARN_DBG((ARN_DBG_CALIBRATE, "arn: "
"%s: longcal @%lu\n", __func__, drv_hztousec));
sc->sc_ani.sc_longcal_timer = timestamp;
}
/* Short calibration applies only while sc_caldone is FALSE */
if (!sc->sc_ani.sc_caldone) {
if ((timestamp - sc->sc_ani.sc_shortcal_timer) >=
ATH_SHORT_CALINTERVAL) {
shortcal = B_TRUE;
ARN_DBG((ARN_DBG_CALIBRATE, "arn: "
"%s: shortcal @%lu\n",
__func__, drv_hztousec));
sc->sc_ani.sc_shortcal_timer = timestamp;
sc->sc_ani.sc_resetcal_timer = timestamp;
}
} else {
if ((timestamp - sc->sc_ani.sc_resetcal_timer) >=
ATH_RESTART_CALINTERVAL) {
ath9k_hw_reset_calvalid(ah, ah->ah_curchan,
&sc->sc_ani.sc_caldone);
if (sc->sc_ani.sc_caldone)
sc->sc_ani.sc_resetcal_timer = timestamp;
}
}
/* Verify whether we must check ANI */
if ((timestamp - sc->sc_ani.sc_checkani_timer) >=
ATH_ANI_POLLINTERVAL) {
aniflag = B_TRUE;
sc->sc_ani.sc_checkani_timer = timestamp;
}
/* Skip all processing if there's nothing to do. */
if (longcal || shortcal || aniflag) {
/* Call ANI routine if necessary */
if (aniflag)
ath9k_hw_ani_monitor(ah, &sc->sc_halstats,
ah->ah_curchan);
/* Perform calibration if necessary */
if (longcal || shortcal) {
boolean_t iscaldone = B_FALSE;
if (ath9k_hw_calibrate(ah, ah->ah_curchan,
sc->sc_rx_chainmask, longcal, &iscaldone)) {
if (longcal)
sc->sc_ani.sc_noise_floor =
ath9k_hw_getchan_noise(ah,
ah->ah_curchan);
ARN_DBG((ARN_DBG_CALIBRATE, "arn: "
"%s: calibrate chan %u/%x nf: %d\n",
__func__,
ah->ah_curchan->channel,
ah->ah_curchan->channelFlags,
sc->sc_ani.sc_noise_floor));
} else {
ARN_DBG((ARN_DBG_CALIBRATE, "arn: "
"%s: calibrate chan %u/%x failed\n",
__func__,
ah->ah_curchan->channel,
ah->ah_curchan->channelFlags));
}
sc->sc_ani.sc_caldone = iscaldone;
}
}
settimer:
/*
* Set timer interval based on previous results.
* The interval must be the shortest necessary to satisfy ANI,
* short calibration and long calibration.
*/
cal_interval = ATH_LONG_CALINTERVAL;
if (sc->sc_ah->ah_config.enable_ani)
cal_interval =
min(cal_interval, (uint32_t)ATH_ANI_POLLINTERVAL);
if (!sc->sc_ani.sc_caldone)
cal_interval = min(cal_interval,
(uint32_t)ATH_SHORT_CALINTERVAL);
sc->sc_scan_timer = 0;
sc->sc_scan_timer = timeout(arn_ani_calibrate, (void *)sc,
drv_usectohz(cal_interval * 1000));
}
static void
arn_stop_caltimer(struct arn_softc *sc)
{
timeout_id_t tmp_id = 0;
while ((sc->sc_cal_timer != 0) && (tmp_id != sc->sc_cal_timer)) {
tmp_id = sc->sc_cal_timer;
(void) untimeout(tmp_id);
}
sc->sc_cal_timer = 0;
}
static uint_t
arn_isr(caddr_t arg)
{
/* LINTED E_BAD_PTR_CAST_ALIGN */
struct arn_softc *sc = (struct arn_softc *)arg;
struct ath_hal *ah = sc->sc_ah;
enum ath9k_int status;
ieee80211com_t *ic = (ieee80211com_t *)sc;
ARN_LOCK(sc);
if (sc->sc_flags & SC_OP_INVALID) {
/*
* The hardware is not ready/present, don't
* touch anything. Note this can happen early
* on if the IRQ is shared.
*/
ARN_UNLOCK(sc);
return (DDI_INTR_UNCLAIMED);
}
if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */
ARN_UNLOCK(sc);
return (DDI_INTR_UNCLAIMED);
}
/*
* Figure out the reason(s) for the interrupt. Note
* that the hal returns a pseudo-ISR that may include
* bits we haven't explicitly enabled so we mask the
* value to insure we only process bits we requested.
*/
(void) ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
status &= sc->sc_imask; /* discard unasked-for bits */
/*
* If there are no status bits set, then this interrupt was not
* for me (should have been caught above).
*/
if (!status) {
ARN_UNLOCK(sc);
return (DDI_INTR_UNCLAIMED);
}
sc->sc_intrstatus = status;
if (status & ATH9K_INT_FATAL) {
/* need a chip reset */
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_FATAL\n"));
goto reset;
} else if (status & ATH9K_INT_RXORN) {
/* need a chip reset */
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_RXORN\n"));
goto reset;
} else {
if (status & ATH9K_INT_RXEOL) {
/*
* NB: the hardware should re-read the link when
* RXE bit is written, but it doesn't work
* at least on older hardware revs.
*/
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_RXEOL\n"));
sc->sc_rxlink = NULL;
}
if (status & ATH9K_INT_TXURN) {
/* bump tx trigger level */
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_TXURN\n"));
(void) ath9k_hw_updatetxtriglevel(ah, B_TRUE);
}
/* XXX: optimize this */
if (status & ATH9K_INT_RX) {
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_RX\n"));
sc->sc_rx_pend = 1;
ddi_trigger_softintr(sc->sc_softint_id);
}
if (status & ATH9K_INT_TX) {
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_TX\n"));
if (ddi_taskq_dispatch(sc->sc_tq,
arn_tx_int_proc, sc, DDI_NOSLEEP) !=
DDI_SUCCESS) {
arn_problem("arn: arn_isr(): "
"No memory for tx taskq\n");
}
}
#ifdef ARN_ATH9K_INT_MIB
if (status & ATH9K_INT_MIB) {
/*
* Disable interrupts until we service the MIB
* interrupt; otherwise it will continue to
* fire.
*/
(void) ath9k_hw_set_interrupts(ah, 0);
/*
* Let the hal handle the event. We assume
* it will clear whatever condition caused
* the interrupt.
*/
ath9k_hw_procmibevent(ah, &sc->sc_halstats);
(void) ath9k_hw_set_interrupts(ah, sc->sc_imask);
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_MIB\n"));
}
#endif
#ifdef ARN_ATH9K_INT_TIM_TIMER
if (status & ATH9K_INT_TIM_TIMER) {
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_TIM_TIMER\n"));
if (!(ah->ah_caps.hw_caps &
ATH9K_HW_CAP_AUTOSLEEP)) {
/*
* Clear RxAbort bit so that we can
* receive frames
*/
ath9k_hw_setrxabort(ah, 0);
goto reset;
}
}
#endif
if (status & ATH9K_INT_BMISS) {
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_BMISS\n"));
#ifdef ARN_HW_BEACON_MISS_HANDLE
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"handle beacon mmiss by H/W mechanism\n"));
if (ddi_taskq_dispatch(sc->sc_tq, arn_bmiss_proc,
sc, DDI_NOSLEEP) != DDI_SUCCESS) {
arn_problem("arn: arn_isr(): "
"No memory available for bmiss taskq\n");
}
#else
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"handle beacon mmiss by S/W mechanism\n"));
#endif /* ARN_HW_BEACON_MISS_HANDLE */
}
ARN_UNLOCK(sc);
#ifdef ARN_ATH9K_INT_CST
/* carrier sense timeout */
if (status & ATH9K_INT_CST) {
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_CST\n"));
return (DDI_INTR_CLAIMED);
}
#endif
if (status & ATH9K_INT_SWBA) {
ARN_DBG((ARN_DBG_INTERRUPT, "arn: arn_isr(): "
"ATH9K_INT_SWBA\n"));
/* This will occur only in Host-AP or Ad-Hoc mode */
return (DDI_INTR_CLAIMED);
}
}
return (DDI_INTR_CLAIMED);
reset:
ARN_DBG((ARN_DBG_INTERRUPT, "Rset for fatal err\n"));
(void) arn_reset(ic);
ARN_UNLOCK(sc);
return (DDI_INTR_CLAIMED);
}
static int
arn_get_channel(struct arn_softc *sc, struct ieee80211_channel *chan)
{
int i;
for (i = 0; i < sc->sc_ah->ah_nchan; i++) {
if (sc->sc_ah->ah_channels[i].channel == chan->ich_freq)
return (i);
}
return (-1);
}
int
arn_reset(ieee80211com_t *ic)
{
struct arn_softc *sc = (struct arn_softc *)ic;
struct ath_hal *ah = sc->sc_ah;
int status;
int error = 0;
(void) ath9k_hw_set_interrupts(ah, 0);
arn_draintxq(sc, 0);
(void) arn_stoprecv(sc);
if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, sc->tx_chan_width,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, B_FALSE, &status)) {
ARN_DBG((ARN_DBG_RESET, "arn: arn_reset(): "
"unable to reset hardware; hal status %u\n", status));
error = EIO;
}
if (arn_startrecv(sc) != 0)
ARN_DBG((ARN_DBG_RESET, "arn: arn_reset(): "
"unable to start recv logic\n"));
/*
* We may be doing a reset in response to a request
* that changes the channel so update any state that
* might change as a result.
*/
arn_setcurmode(sc, arn_chan2mode(sc->sc_ah->ah_curchan));
arn_update_txpow(sc);
if (sc->sc_flags & SC_OP_BEACONS)
arn_beacon_config(sc); /* restart beacons */
(void) ath9k_hw_set_interrupts(ah, sc->sc_imask);
return (error);
}
int
arn_get_hal_qnum(uint16_t queue, struct arn_softc *sc)
{
int qnum;
switch (queue) {
case WME_AC_VO:
qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO];
break;
case WME_AC_VI:
qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI];
break;
case WME_AC_BE:
qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
break;
case WME_AC_BK:
qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK];
break;
default:
qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
break;
}
return (qnum);
}
static struct {
uint32_t version;
const char *name;
} ath_mac_bb_names[] = {
{ AR_SREV_VERSION_5416_PCI, "5416" },
{ AR_SREV_VERSION_5416_PCIE, "5418" },
{ AR_SREV_VERSION_9100, "9100" },
{ AR_SREV_VERSION_9160, "9160" },
{ AR_SREV_VERSION_9280, "9280" },
{ AR_SREV_VERSION_9285, "9285" }
};
static struct {
uint16_t version;
const char *name;
} ath_rf_names[] = {
{ 0, "5133" },
{ AR_RAD5133_SREV_MAJOR, "5133" },
{ AR_RAD5122_SREV_MAJOR, "5122" },
{ AR_RAD2133_SREV_MAJOR, "2133" },
{ AR_RAD2122_SREV_MAJOR, "2122" }
};
/*
* Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
*/
static const char *
arn_mac_bb_name(uint32_t mac_bb_version)
{
int i;
for (i = 0; i < ARRAY_SIZE(ath_mac_bb_names); i++) {
if (ath_mac_bb_names[i].version == mac_bb_version) {
return (ath_mac_bb_names[i].name);
}
}
return ("????");
}
/*
* Return the RF name. "????" is returned if the RF is unknown.
*/
static const char *
arn_rf_name(uint16_t rf_version)
{
int i;
for (i = 0; i < ARRAY_SIZE(ath_rf_names); i++) {
if (ath_rf_names[i].version == rf_version) {
return (ath_rf_names[i].name);
}
}
return ("????");
}
static void
arn_next_scan(void *arg)
{
ieee80211com_t *ic = arg;
struct arn_softc *sc = (struct arn_softc *)ic;
sc->sc_scan_timer = 0;
if (ic->ic_state == IEEE80211_S_SCAN) {
sc->sc_scan_timer = timeout(arn_next_scan, (void *)sc,
drv_usectohz(arn_dwelltime * 1000));
ieee80211_next_scan(ic);
}
}
static void
arn_stop_scantimer(struct arn_softc *sc)
{
timeout_id_t tmp_id = 0;
while ((sc->sc_scan_timer != 0) && (tmp_id != sc->sc_scan_timer)) {
tmp_id = sc->sc_scan_timer;
(void) untimeout(tmp_id);
}
sc->sc_scan_timer = 0;
}
static int32_t
arn_newstate(ieee80211com_t *ic, enum ieee80211_state nstate, int arg)
{
struct arn_softc *sc = (struct arn_softc *)ic;
struct ath_hal *ah = sc->sc_ah;
struct ieee80211_node *in;
int32_t i, error;
uint8_t *bssid;
uint32_t rfilt;
enum ieee80211_state ostate;
struct ath9k_channel *channel;
int pos;
/* Should set up & init LED here */
if (sc->sc_flags & SC_OP_INVALID)
return (0);
ostate = ic->ic_state;
ARN_DBG((ARN_DBG_INIT, "arn: arn_newstate(): "
"%x -> %x!\n", ostate, nstate));
ARN_LOCK(sc);
if (nstate != IEEE80211_S_SCAN)
arn_stop_scantimer(sc);
if (nstate != IEEE80211_S_RUN)
arn_stop_caltimer(sc);
/* Should set LED here */
if (nstate == IEEE80211_S_INIT) {
sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
/*
* Disable interrupts.
*/
(void) ath9k_hw_set_interrupts
(ah, sc->sc_imask &~ ATH9K_INT_GLOBAL);
#ifdef ARN_IBSS
if (ic->ic_opmode == IEEE80211_M_IBSS) {
(void) ath9k_hw_stoptxdma(ah, sc->sc_beaconq);
arn_beacon_return(sc);
}
#endif
ARN_UNLOCK(sc);
ieee80211_stop_watchdog(ic);
goto done;
}
in = ic->ic_bss;
pos = arn_get_channel(sc, ic->ic_curchan);
if (pos == -1) {
ARN_DBG((ARN_DBG_FATAL, "arn: "
"%s: Invalid channel\n", __func__));
error = EINVAL;
ARN_UNLOCK(sc);
goto bad;
}
if (in->in_htcap & IEEE80211_HTCAP_CHWIDTH40) {
arn_update_chainmask(sc);
sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
} else
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
sc->sc_ah->ah_channels[pos].chanmode =
arn_chan2flags(ic, ic->ic_curchan);
channel = &sc->sc_ah->ah_channels[pos];
if (channel == NULL) {
arn_problem("arn_newstate(): channel == NULL");
ARN_UNLOCK(sc);
goto bad;
}
error = arn_set_channel(sc, channel);
if (error != 0) {
if (nstate != IEEE80211_S_SCAN) {
ARN_UNLOCK(sc);
ieee80211_reset_chan(ic);
goto bad;
}
}
/*
* Get the receive filter according to the
* operating mode and state
*/
rfilt = arn_calcrxfilter(sc);
if (nstate == IEEE80211_S_SCAN)
bssid = ic->ic_macaddr;
else
bssid = in->in_bssid;
ath9k_hw_setrxfilter(ah, rfilt);
if (nstate == IEEE80211_S_RUN && ic->ic_opmode != IEEE80211_M_IBSS)
ath9k_hw_write_associd(ah, bssid, in->in_associd);
else
ath9k_hw_write_associd(ah, bssid, 0);
/* Check for WLAN_CAPABILITY_PRIVACY ? */
if (ic->ic_flags & IEEE80211_F_PRIVACY) {
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
if (ath9k_hw_keyisvalid(ah, (uint16_t)i))
(void) ath9k_hw_keysetmac(ah, (uint16_t)i,
bssid);
}
}
if (nstate == IEEE80211_S_RUN) {
switch (ic->ic_opmode) {
#ifdef ARN_IBSS
case IEEE80211_M_IBSS:
/*
* Allocate and setup the beacon frame.
* Stop any previous beacon DMA.
*/
(void) ath9k_hw_stoptxdma(ah, sc->sc_beaconq);
arn_beacon_return(sc);
error = arn_beacon_alloc(sc, in);
if (error != 0) {
ARN_UNLOCK(sc);
goto bad;
}
/*
* If joining an adhoc network defer beacon timer
* configuration to the next beacon frame so we
* have a current TSF to use. Otherwise we're
* starting an ibss/bss so there's no need to delay.
*/
if (ic->ic_opmode == IEEE80211_M_IBSS &&
ic->ic_bss->in_tstamp.tsf != 0) {
sc->sc_bsync = 1;
} else {
arn_beacon_config(sc);
}
break;
#endif /* ARN_IBSS */
case IEEE80211_M_STA:
if (ostate != IEEE80211_S_RUN) {
/*
* Defer beacon timer configuration to the next
* beacon frame so we have a current TSF to use.
* Any TSF collected when scanning is likely old
*/
#ifdef ARN_IBSS
sc->sc_bsync = 1;
#else
/* Configure the beacon and sleep timers. */
arn_beacon_config(sc);
/* Reset rssi stats */
sc->sc_halstats.ns_avgbrssi =
ATH_RSSI_DUMMY_MARKER;
sc->sc_halstats.ns_avgrssi =
ATH_RSSI_DUMMY_MARKER;
sc->sc_halstats.ns_avgtxrssi =
ATH_RSSI_DUMMY_MARKER;
sc->sc_halstats.ns_avgtxrate =
ATH_RATE_DUMMY_MARKER;
/* end */
#endif /* ARN_IBSS */
}
break;
default:
break;
}
} else {
sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
(void) ath9k_hw_set_interrupts(ah, sc->sc_imask);
}
/*
* Reset the rate control state.
*/
arn_rate_ctl_reset(sc, nstate);
ARN_UNLOCK(sc);
done:
/*
* Invoke the parent method to complete the work.
*/
error = sc->sc_newstate(ic, nstate, arg);
/*
* Finally, start any timers.
*/
if (nstate == IEEE80211_S_RUN) {
ieee80211_start_watchdog(ic, 1);
ASSERT(sc->sc_cal_timer == 0);
sc->sc_cal_timer = timeout(arn_ani_calibrate, (void *)sc,
drv_usectohz(100 * 1000));
} else if ((nstate == IEEE80211_S_SCAN) && (ostate != nstate)) {
/* start ap/neighbor scan timer */
/* ASSERT(sc->sc_scan_timer == 0); */
if (sc->sc_scan_timer != 0) {
(void) untimeout(sc->sc_scan_timer);
sc->sc_scan_timer = 0;
}
sc->sc_scan_timer = timeout(arn_next_scan, (void *)sc,
drv_usectohz(arn_dwelltime * 1000));
}
bad:
return (error);
}
static void
arn_watchdog(void *arg)
{
struct arn_softc *sc = arg;
ieee80211com_t *ic = &sc->sc_isc;
int ntimer = 0;
ARN_LOCK(sc);
ic->ic_watchdog_timer = 0;
if (sc->sc_flags & SC_OP_INVALID) {
ARN_UNLOCK(sc);
return;
}
if (ic->ic_state == IEEE80211_S_RUN) {
/*
* Start the background rate control thread if we
* are not configured to use a fixed xmit rate.
*/
#ifdef ARN_LEGACY_RC
if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) {
sc->sc_stats.ast_rate_calls ++;
if (ic->ic_opmode == IEEE80211_M_STA)
arn_rate_ctl(ic, ic->ic_bss);
else
ieee80211_iterate_nodes(&ic->ic_sta,
arn_rate_ctl, sc);
}
#endif /* ARN_LEGACY_RC */
#ifdef ARN_HW_BEACON_MISS_HANDLE
/* nothing to do here */
#else
/* currently set 10 seconds as beacon miss threshold */
if (ic->ic_beaconmiss++ > 100) {
ARN_DBG((ARN_DBG_BEACON, "arn_watchdog():"
"Beacon missed for 10 seconds, run"
"ieee80211_new_state(ic, IEEE80211_S_INIT, -1)\n"));
ARN_UNLOCK(sc);
(void) ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
return;
}
#endif /* ARN_HW_BEACON_MISS_HANDLE */
ntimer = 1;
}
ARN_UNLOCK(sc);
ieee80211_watchdog(ic);
if (ntimer != 0)
ieee80211_start_watchdog(ic, ntimer);
}
/* ARGSUSED */
static struct ieee80211_node *
arn_node_alloc(ieee80211com_t *ic)
{
struct ath_node *an;
#ifdef ARN_TX_AGGREGATION
struct arn_softc *sc = (struct arn_softc *)ic;
#endif
an = kmem_zalloc(sizeof (struct ath_node), KM_SLEEP);
/* legacy rate control */
#ifdef ARN_LEGACY_RC
arn_rate_update(sc, &an->an_node, 0);
#endif
#ifdef ARN_TX_AGGREGATION
if (sc->sc_flags & SC_OP_TXAGGR) {
arn_tx_node_init(sc, an);
}
#endif /* ARN_TX_AGGREGATION */
an->last_rssi = ATH_RSSI_DUMMY_MARKER;
return ((an != NULL) ? &an->an_node : NULL);
}
static void
arn_node_free(struct ieee80211_node *in)
{
ieee80211com_t *ic = in->in_ic;
struct arn_softc *sc = (struct arn_softc *)ic;
struct ath_buf *bf;
struct ath_txq *txq;
int32_t i;
#ifdef ARN_TX_AGGREGATION
if (sc->sc_flags & SC_OP_TXAGGR)
arn_tx_node_cleanup(sc, in);
#endif /* TX_AGGREGATION */
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ARN_TXQ_SETUP(sc, i)) {
txq = &sc->sc_txq[i];
mutex_enter(&txq->axq_lock);
bf = list_head(&txq->axq_list);
while (bf != NULL) {
if (bf->bf_in == in) {
bf->bf_in = NULL;
}
bf = list_next(&txq->axq_list, bf);
}
mutex_exit(&txq->axq_lock);
}
}
ic->ic_node_cleanup(in);
if (in->in_wpa_ie != NULL)
ieee80211_free(in->in_wpa_ie);
if (in->in_wme_ie != NULL)
ieee80211_free(in->in_wme_ie);
if (in->in_htcap_ie != NULL)
ieee80211_free(in->in_htcap_ie);
kmem_free(in, sizeof (struct ath_node));
}
/*
* Allocate tx/rx key slots for TKIP. We allocate one slot for
* each key. MIC is right after the decrypt/encrypt key.
*/
static uint16_t
arn_key_alloc_pair(struct arn_softc *sc, ieee80211_keyix *txkeyix,
ieee80211_keyix *rxkeyix)
{
uint16_t i, keyix;
ASSERT(!sc->sc_splitmic);
for (i = 0; i < ARRAY_SIZE(sc->sc_keymap)/4; i++) {
uint8_t b = sc->sc_keymap[i];
if (b == 0xff)
continue;
for (keyix = i * NBBY; keyix < (i + 1) * NBBY;
keyix++, b >>= 1) {
if ((b & 1) || is_set(keyix+64, sc->sc_keymap)) {
/* full pair unavailable */
continue;
}
set_bit(keyix, sc->sc_keymap);
set_bit(keyix+64, sc->sc_keymap);
ARN_DBG((ARN_DBG_KEYCACHE,
"arn_key_alloc_pair(): key pair %u,%u\n",
keyix, keyix+64));
*txkeyix = *rxkeyix = keyix;
return (1);
}
}
ARN_DBG((ARN_DBG_KEYCACHE, "arn_key_alloc_pair():"
" out of pair space\n"));
return (0);
}
/*
* Allocate tx/rx key slots for TKIP. We allocate two slots for
* each key, one for decrypt/encrypt and the other for the MIC.
*/
static int
arn_key_alloc_2pair(struct arn_softc *sc, ieee80211_keyix *txkeyix,
ieee80211_keyix *rxkeyix)
{
uint16_t i, keyix;
ASSERT(sc->sc_splitmic);
for (i = 0; i < ARRAY_SIZE(sc->sc_keymap)/4; i++) {
uint8_t b = sc->sc_keymap[i];
if (b != 0xff) {
/*
* One or more slots in this byte are free.
*/
keyix = i*NBBY;
while (b & 1) {
again:
keyix++;
b >>= 1;
}
/* XXX IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV */
if (is_set(keyix+32, sc->sc_keymap) ||
is_set(keyix+64, sc->sc_keymap) ||
is_set(keyix+32+64, sc->sc_keymap)) {
/* full pair unavailable */
if (keyix == (i+1)*NBBY) {
/* no slots were appropriate, advance */
continue;
}
goto again;
}
set_bit(keyix, sc->sc_keymap);
set_bit(keyix+64, sc->sc_keymap);
set_bit(keyix+32, sc->sc_keymap);
set_bit(keyix+32+64, sc->sc_keymap);
ARN_DBG((ARN_DBG_KEYCACHE,
"arn_key_alloc_2pair(): key pair %u,%u %u,%u\n",
keyix, keyix+64,
keyix+32, keyix+32+64));
*txkeyix = *rxkeyix = keyix;
return (1);
}
}
ARN_DBG((ARN_DBG_KEYCACHE, "arn_key_alloc_2pair(): "
" out of pair space\n"));
return (0);
}
/*
* Allocate a single key cache slot.
*/
static int
arn_key_alloc_single(struct arn_softc *sc, ieee80211_keyix *txkeyix,
ieee80211_keyix *rxkeyix)
{
uint16_t i, keyix;
/* try i,i+32,i+64,i+32+64 to minimize key pair conflicts */
for (i = 0; i < ARRAY_SIZE(sc->sc_keymap); i++) {
uint8_t b = sc->sc_keymap[i];
if (b != 0xff) {
/*
* One or more slots are free.
*/
keyix = i*NBBY;
while (b & 1)
keyix++, b >>= 1;
set_bit(keyix, sc->sc_keymap);
ARN_DBG((ARN_DBG_KEYCACHE, "arn_key_alloc_single(): "
"key %u\n", keyix));
*txkeyix = *rxkeyix = keyix;
return (1);
}
}
return (0);
}
/*
* Allocate one or more key cache slots for a unicast key. The
* key itself is needed only to identify the cipher. For hardware
* TKIP with split cipher+MIC keys we allocate two key cache slot
* pairs so that we can setup separate TX and RX MIC keys. Note
* that the MIC key for a TKIP key at slot i is assumed by the
* hardware to be at slot i+64. This limits TKIP keys to the first
* 64 entries.
*/
/* ARGSUSED */
int
arn_key_alloc(ieee80211com_t *ic, const struct ieee80211_key *k,
ieee80211_keyix *keyix, ieee80211_keyix *rxkeyix)
{
struct arn_softc *sc = (struct arn_softc *)ic;
/*
* We allocate two pair for TKIP when using the h/w to do
* the MIC. For everything else, including software crypto,
* we allocate a single entry. Note that s/w crypto requires
* a pass-through slot on the 5211 and 5212. The 5210 does
* not support pass-through cache entries and we map all
* those requests to slot 0.
*/
if (k->wk_flags & IEEE80211_KEY_SWCRYPT) {
return (arn_key_alloc_single(sc, keyix, rxkeyix));
} else if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP &&
(k->wk_flags & IEEE80211_KEY_SWMIC) == 0) {
if (sc->sc_splitmic)
return (arn_key_alloc_2pair(sc, keyix, rxkeyix));
else
return (arn_key_alloc_pair(sc, keyix, rxkeyix));
} else {
return (arn_key_alloc_single(sc, keyix, rxkeyix));
}
}
/*
* Delete an entry in the key cache allocated by ath_key_alloc.
*/
int
arn_key_delete(ieee80211com_t *ic, const struct ieee80211_key *k)
{
struct arn_softc *sc = (struct arn_softc *)ic;
struct ath_hal *ah = sc->sc_ah;
const struct ieee80211_cipher *cip = k->wk_cipher;
ieee80211_keyix keyix = k->wk_keyix;
ARN_DBG((ARN_DBG_KEYCACHE, "arn_key_delete():"
" delete key %u ic_cipher=0x%x\n", keyix, cip->ic_cipher));
(void) ath9k_hw_keyreset(ah, keyix);
/*
* Handle split tx/rx keying required for TKIP with h/w MIC.
*/
if (cip->ic_cipher == IEEE80211_CIPHER_TKIP &&
(k->wk_flags & IEEE80211_KEY_SWMIC) == 0 && sc->sc_splitmic)
(void) ath9k_hw_keyreset(ah, keyix+32); /* RX key */
if (keyix >= IEEE80211_WEP_NKID) {
/*
* Don't touch keymap entries for global keys so
* they are never considered for dynamic allocation.
*/
clr_bit(keyix, sc->sc_keymap);
if (cip->ic_cipher == IEEE80211_CIPHER_TKIP &&
(k->wk_flags & IEEE80211_KEY_SWMIC) == 0) {
/*
* If splitmic is true +64 is TX key MIC,
* else +64 is RX key + RX key MIC.
*/
clr_bit(keyix+64, sc->sc_keymap);
if (sc->sc_splitmic) {
/* Rx key */
clr_bit(keyix+32, sc->sc_keymap);
/* RX key MIC */
clr_bit(keyix+32+64, sc->sc_keymap);
}
}
}
return (1);
}
/*
* Set a TKIP key into the hardware. This handles the
* potential distribution of key state to multiple key
* cache slots for TKIP.
*/
static int
arn_keyset_tkip(struct arn_softc *sc, const struct ieee80211_key *k,
struct ath9k_keyval *hk, const uint8_t mac[IEEE80211_ADDR_LEN])
{
uint8_t *key_rxmic = NULL;
uint8_t *key_txmic = NULL;
uint8_t *key = (uint8_t *)&(k->wk_key[0]);
struct ath_hal *ah = sc->sc_ah;
key_txmic = key + 16;
key_rxmic = key + 24;
if (mac == NULL) {
/* Group key installation */
(void) memcpy(hk->kv_mic, key_rxmic, sizeof (hk->kv_mic));
return (ath9k_hw_set_keycache_entry(ah, k->wk_keyix, hk,
mac, B_FALSE));
}
if (!sc->sc_splitmic) {
/*
* data key goes at first index,
* the hal handles the MIC keys at index+64.
*/
(void) memcpy(hk->kv_mic, key_rxmic, sizeof (hk->kv_mic));
(void) memcpy(hk->kv_txmic, key_txmic, sizeof (hk->kv_txmic));
return (ath9k_hw_set_keycache_entry(ah, k->wk_keyix, hk,
mac, B_FALSE));
}
/*
* TX key goes at first index, RX key at +32.
* The hal handles the MIC keys at index+64.
*/
(void) memcpy(hk->kv_mic, key_txmic, sizeof (hk->kv_mic));
if (!(ath9k_hw_set_keycache_entry(ah, k->wk_keyix, hk, NULL,
B_FALSE))) {
/* Txmic entry failed. No need to proceed further */
ARN_DBG((ARN_DBG_KEYCACHE,
"%s Setting TX MIC Key Failed\n", __func__));
return (0);
}
(void) memcpy(hk->kv_mic, key_rxmic, sizeof (hk->kv_mic));
/* XXX delete tx key on failure? */
return (ath9k_hw_set_keycache_entry(ah, k->wk_keyix, hk, mac, B_FALSE));
}
int
arn_key_set(ieee80211com_t *ic, const struct ieee80211_key *k,
const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct arn_softc *sc = (struct arn_softc *)ic;
const struct ieee80211_cipher *cip = k->wk_cipher;
struct ath9k_keyval hk;
/* cipher table */
static const uint8_t ciphermap[] = {
ATH9K_CIPHER_WEP, /* IEEE80211_CIPHER_WEP */
ATH9K_CIPHER_TKIP, /* IEEE80211_CIPHER_TKIP */
ATH9K_CIPHER_AES_OCB, /* IEEE80211_CIPHER_AES_OCB */
ATH9K_CIPHER_AES_CCM, /* IEEE80211_CIPHER_AES_CCM */
ATH9K_CIPHER_CKIP, /* IEEE80211_CIPHER_CKIP */
ATH9K_CIPHER_CLR, /* IEEE80211_CIPHER_NONE */
};
bzero(&hk, sizeof (hk));
/*
* Software crypto uses a "clear key" so non-crypto
* state kept in the key cache are maintainedd so that
* rx frames have an entry to match.
*/
if ((k->wk_flags & IEEE80211_KEY_SWCRYPT) == 0) {
ASSERT(cip->ic_cipher < 6);
hk.kv_type = ciphermap[cip->ic_cipher];
hk.kv_len = k->wk_keylen;
bcopy(k->wk_key, hk.kv_val, k->wk_keylen);
} else {
hk.kv_type = ATH9K_CIPHER_CLR;
}
if (hk.kv_type == ATH9K_CIPHER_TKIP &&
(k->wk_flags & IEEE80211_KEY_SWMIC) == 0) {
return (arn_keyset_tkip(sc, k, &hk, mac));
} else {
return (ath9k_hw_set_keycache_entry(sc->sc_ah,
k->wk_keyix, &hk, mac, B_FALSE));
}
}
/*
* Enable/Disable short slot timing
*/
void
arn_set_shortslot(ieee80211com_t *ic, int onoff)
{
struct ath_hal *ah = ((struct arn_softc *)ic)->sc_ah;
if (onoff)
(void) ath9k_hw_setslottime(ah, ATH9K_SLOT_TIME_9);
else
(void) ath9k_hw_setslottime(ah, ATH9K_SLOT_TIME_20);
}
static int
arn_open(struct arn_softc *sc)
{
ieee80211com_t *ic = (ieee80211com_t *)sc;
struct ieee80211_channel *curchan = ic->ic_curchan;
struct ath9k_channel *init_channel;
int error = 0, pos, status;
ARN_LOCK_ASSERT(sc);
pos = arn_get_channel(sc, curchan);
if (pos == -1) {
ARN_DBG((ARN_DBG_FATAL, "arn: "
"%s: Invalid channel\n", __func__));
error = EINVAL;
goto error;
}
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
if (sc->sc_curmode == ATH9K_MODE_11A) {
sc->sc_ah->ah_channels[pos].chanmode = CHANNEL_A;
} else {
sc->sc_ah->ah_channels[pos].chanmode = CHANNEL_G;
}
init_channel = &sc->sc_ah->ah_channels[pos];
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(sc->sc_ah, 0);
/*
* The basic interface to setting the hardware in a good
* state is ``reset''. On return the hardware is known to
* be powered up and with interrupts disabled. This must
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
if (!ath9k_hw_reset(sc->sc_ah, init_channel,
sc->tx_chan_width, sc->sc_tx_chainmask,
sc->sc_rx_chainmask, sc->sc_ht_extprotspacing,
B_FALSE, &status)) {
ARN_DBG((ARN_DBG_FATAL, "arn: "
"%s: unable to reset hardware; hal status %u "
"(freq %u flags 0x%x)\n", __func__, status,
init_channel->channel, init_channel->channelFlags));
error = EIO;
goto error;
}
/*
* This is needed only to setup initial state
* but it's best done after a reset.
*/
arn_update_txpow(sc);
/*
* Setup the hardware after reset:
* The receive engine is set going.
* Frame transmit is handled entirely
* in the frame output path; there's nothing to do
* here except setup the interrupt mask.
*/
if (arn_startrecv(sc) != 0) {
ARN_DBG((ARN_DBG_INIT, "arn: "
"%s: unable to start recv logic\n", __func__));
error = EIO;
goto error;
}
/* Setup our intr mask. */
sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX |
ATH9K_INT_RXEOL | ATH9K_INT_RXORN |
ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
#ifdef ARN_ATH9K_HW_CAP_GTT
if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT)
sc->sc_imask |= ATH9K_INT_GTT;
#endif
#ifdef ARN_ATH9K_HW_CAP_GTT
if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
sc->sc_imask |= ATH9K_INT_CST;
#endif
/*
* Enable MIB interrupts when there are hardware phy counters.
* Note we only do this (at the moment) for station mode.
*/
#ifdef ARN_ATH9K_INT_MIB
if (ath9k_hw_phycounters(sc->sc_ah) &&
((sc->sc_ah->ah_opmode == ATH9K_M_STA) ||
(sc->sc_ah->ah_opmode == ATH9K_M_IBSS)))
sc->sc_imask |= ATH9K_INT_MIB;
#endif
/*
* Some hardware processes the TIM IE and fires an
* interrupt when the TIM bit is set. For hardware
* that does, if not overridden by configuration,
* enable the TIM interrupt when operating as station.
*/
#ifdef ARN_ATH9K_INT_TIM
if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
(sc->sc_ah->ah_opmode == ATH9K_M_STA) &&
!sc->sc_config.swBeaconProcess)
sc->sc_imask |= ATH9K_INT_TIM;
#endif
if (arn_chan2mode(init_channel) != sc->sc_curmode)
arn_setcurmode(sc, arn_chan2mode(init_channel));
ARN_DBG((ARN_DBG_INIT, "arn: "
"%s: current mode after arn_setcurmode is %d\n",
__func__, sc->sc_curmode));
sc->sc_isrunning = 1;
/* Disable BMISS interrupt when we're not associated */
sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
(void) ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
return (0);
error:
return (error);
}
static void
arn_close(struct arn_softc *sc)
{
ieee80211com_t *ic = (ieee80211com_t *)sc;
struct ath_hal *ah = sc->sc_ah;
ARN_LOCK_ASSERT(sc);
if (!sc->sc_isrunning)
return;
/*
* Shutdown the hardware and driver
* Note that some of this work is not possible if the
* hardware is gone (invalid).
*/
ARN_UNLOCK(sc);
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
ieee80211_stop_watchdog(ic);
ARN_LOCK(sc);
/*
* make sure h/w will not generate any interrupt
* before setting the invalid flag.
*/
(void) ath9k_hw_set_interrupts(ah, 0);
if (!(sc->sc_flags & SC_OP_INVALID)) {
arn_draintxq(sc, 0);
(void) arn_stoprecv(sc);
(void) ath9k_hw_phy_disable(ah);
} else {
sc->sc_rxlink = NULL;
}
sc->sc_isrunning = 0;
}
/*
* MAC callback functions
*/
static int
arn_m_stat(void *arg, uint_t stat, uint64_t *val)
{
struct arn_softc *sc = arg;
ieee80211com_t *ic = (ieee80211com_t *)sc;
struct ieee80211_node *in;
struct ieee80211_rateset *rs;
ARN_LOCK(sc);
switch (stat) {
case MAC_STAT_IFSPEED:
in = ic->ic_bss;
rs = &in->in_rates;
*val = (rs->ir_rates[in->in_txrate] & IEEE80211_RATE_VAL) / 2 *
1000000ull;
break;
case MAC_STAT_NOXMTBUF:
*val = sc->sc_stats.ast_tx_nobuf +
sc->sc_stats.ast_tx_nobufmgt;
break;
case MAC_STAT_IERRORS:
*val = sc->sc_stats.ast_rx_tooshort;
break;
case MAC_STAT_RBYTES:
*val = ic->ic_stats.is_rx_bytes;
break;
case MAC_STAT_IPACKETS:
*val = ic->ic_stats.is_rx_frags;
break;
case MAC_STAT_OBYTES:
*val = ic->ic_stats.is_tx_bytes;
break;
case MAC_STAT_OPACKETS:
*val = ic->ic_stats.is_tx_frags;
break;
case MAC_STAT_OERRORS:
case WIFI_STAT_TX_FAILED:
*val = sc->sc_stats.ast_tx_fifoerr +
sc->sc_stats.ast_tx_xretries +
sc->sc_stats.ast_tx_discard;
break;
case WIFI_STAT_TX_RETRANS:
*val = sc->sc_stats.ast_tx_xretries;
break;
case WIFI_STAT_FCS_ERRORS:
*val = sc->sc_stats.ast_rx_crcerr;
break;
case WIFI_STAT_WEP_ERRORS:
*val = sc->sc_stats.ast_rx_badcrypt;
break;
case WIFI_STAT_TX_FRAGS:
case WIFI_STAT_MCAST_TX:
case WIFI_STAT_RTS_SUCCESS:
case WIFI_STAT_RTS_FAILURE:
case WIFI_STAT_ACK_FAILURE:
case WIFI_STAT_RX_FRAGS:
case WIFI_STAT_MCAST_RX:
case WIFI_STAT_RX_DUPS:
ARN_UNLOCK(sc);
return (ieee80211_stat(ic, stat, val));
default:
ARN_UNLOCK(sc);
return (ENOTSUP);
}
ARN_UNLOCK(sc);
return (0);
}
int
arn_m_start(void *arg)
{
struct arn_softc *sc = arg;
int err = 0;
ARN_LOCK(sc);
/*
* Stop anything previously setup. This is safe
* whether this is the first time through or not.
*/
arn_close(sc);
if ((err = arn_open(sc)) != 0) {
ARN_UNLOCK(sc);
return (err);
}
/* H/W is reday now */
sc->sc_flags &= ~SC_OP_INVALID;
ARN_UNLOCK(sc);
return (0);
}
static void
arn_m_stop(void *arg)
{
struct arn_softc *sc = arg;
ARN_LOCK(sc);
arn_close(sc);
/* disable HAL and put h/w to sleep */
(void) ath9k_hw_disable(sc->sc_ah);
ath9k_hw_configpcipowersave(sc->sc_ah, 1);
/* XXX: hardware will not be ready in suspend state */
sc->sc_flags |= SC_OP_INVALID;
ARN_UNLOCK(sc);
}
static int
arn_m_promisc(void *arg, boolean_t on)
{
struct arn_softc *sc = arg;
struct ath_hal *ah = sc->sc_ah;
uint32_t rfilt;
ARN_LOCK(sc);
rfilt = ath9k_hw_getrxfilter(ah);
if (on)
rfilt |= ATH9K_RX_FILTER_PROM;
else
rfilt &= ~ATH9K_RX_FILTER_PROM;
sc->sc_promisc = on;
ath9k_hw_setrxfilter(ah, rfilt);
ARN_UNLOCK(sc);
return (0);
}
static int
arn_m_multicst(void *arg, boolean_t add, const uint8_t *mca)
{
struct arn_softc *sc = arg;
struct ath_hal *ah = sc->sc_ah;
uint32_t val, index, bit;
uint8_t pos;
uint32_t *mfilt = sc->sc_mcast_hash;
ARN_LOCK(sc);
/* calculate XOR of eight 6bit values */
val = ARN_LE_READ_32(mca + 0);
pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
val = ARN_LE_READ_32(mca + 3);
pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
pos &= 0x3f;
index = pos / 32;
bit = 1 << (pos % 32);
if (add) { /* enable multicast */
sc->sc_mcast_refs[pos]++;
mfilt[index] |= bit;
} else { /* disable multicast */
if (--sc->sc_mcast_refs[pos] == 0)
mfilt[index] &= ~bit;
}
ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]);
ARN_UNLOCK(sc);
return (0);
}
static int
arn_m_unicst(void *arg, const uint8_t *macaddr)
{
struct arn_softc *sc = arg;
struct ath_hal *ah = sc->sc_ah;
ieee80211com_t *ic = (ieee80211com_t *)sc;
ARN_DBG((ARN_DBG_XMIT, "ath: ath_gld_saddr(): "
"%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]));
ARN_LOCK(sc);
IEEE80211_ADDR_COPY(sc->sc_isc.ic_macaddr, macaddr);
(void) ath9k_hw_setmac(ah, sc->sc_isc.ic_macaddr);
(void) arn_reset(ic);
ARN_UNLOCK(sc);
return (0);
}
static mblk_t *
arn_m_tx(void *arg, mblk_t *mp)
{
struct arn_softc *sc = arg;
int error = 0;
mblk_t *next;
ieee80211com_t *ic = (ieee80211com_t *)sc;
/*
* No data frames go out unless we're associated; this
* should not happen as the 802.11 layer does not enable
* the xmit queue until we enter the RUN state.
*/
if (ic->ic_state != IEEE80211_S_RUN) {
ARN_DBG((ARN_DBG_XMIT, "arn: arn_m_tx(): "
"discard, state %u\n", ic->ic_state));
sc->sc_stats.ast_tx_discard++;
freemsgchain(mp);
return (NULL);
}
while (mp != NULL) {
next = mp->b_next;
mp->b_next = NULL;
error = arn_tx(ic, mp, IEEE80211_FC0_TYPE_DATA);
if (error != 0) {
mp->b_next = next;
if (error == ENOMEM) {
break;
} else {
freemsgchain(mp);
return (NULL);
}
}
mp = next;
}
return (mp);
}
static void
arn_m_ioctl(void *arg, queue_t *wq, mblk_t *mp)
{
struct arn_softc *sc = arg;
int32_t err;
err = ieee80211_ioctl(&sc->sc_isc, wq, mp);
ARN_LOCK(sc);
if (err == ENETRESET) {
if (!(sc->sc_flags & SC_OP_INVALID)) {
ARN_UNLOCK(sc);
(void) arn_m_start(sc);
(void) ieee80211_new_state(&sc->sc_isc,
IEEE80211_S_SCAN, -1);
ARN_LOCK(sc);
}
}
ARN_UNLOCK(sc);
}
static int
arn_m_setprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num,
uint_t wldp_length, const void *wldp_buf)
{
struct arn_softc *sc = arg;
int err;
err = ieee80211_setprop(&sc->sc_isc, pr_name, wldp_pr_num,
wldp_length, wldp_buf);
ARN_LOCK(sc);
if (err == ENETRESET) {
if (!(sc->sc_flags & SC_OP_INVALID)) {
ARN_UNLOCK(sc);
(void) arn_m_start(sc);
(void) ieee80211_new_state(&sc->sc_isc,
IEEE80211_S_SCAN, -1);
ARN_LOCK(sc);
}
err = 0;
}
ARN_UNLOCK(sc);
return (err);
}
/* ARGSUSED */
static int
arn_m_getprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num,
uint_t wldp_length, void *wldp_buf)
{
struct arn_softc *sc = arg;
int err = 0;
err = ieee80211_getprop(&sc->sc_isc, pr_name, wldp_pr_num,
wldp_length, wldp_buf);
return (err);
}
static void
arn_m_propinfo(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num,
mac_prop_info_handle_t prh)
{
struct arn_softc *sc = arg;
ieee80211_propinfo(&sc->sc_isc, pr_name, wldp_pr_num, prh);
}
/* return bus cachesize in 4B word units */
static void
arn_pci_config_cachesize(struct arn_softc *sc)
{
uint8_t csz;
/*
* Cache line size is used to size and align various
* structures used to communicate with the hardware.
*/
csz = pci_config_get8(sc->sc_cfg_handle, PCI_CONF_CACHE_LINESZ);
if (csz == 0) {
/*
* We must have this setup properly for rx buffer
* DMA to work so force a reasonable value here if it
* comes up zero.
*/
csz = ATH_DEF_CACHE_BYTES / sizeof (uint32_t);
pci_config_put8(sc->sc_cfg_handle, PCI_CONF_CACHE_LINESZ,
csz);
}
sc->sc_cachelsz = csz << 2;
}
static int
arn_pci_setup(struct arn_softc *sc)
{
uint16_t command;
/*
* Enable memory mapping and bus mastering
*/
ASSERT(sc != NULL);
command = pci_config_get16(sc->sc_cfg_handle, PCI_CONF_COMM);
command |= PCI_COMM_MAE | PCI_COMM_ME;
pci_config_put16(sc->sc_cfg_handle, PCI_CONF_COMM, command);
command = pci_config_get16(sc->sc_cfg_handle, PCI_CONF_COMM);
if ((command & PCI_COMM_MAE) == 0) {
arn_problem("arn: arn_pci_setup(): "
"failed to enable memory mapping\n");
return (EIO);
}
if ((command & PCI_COMM_ME) == 0) {
arn_problem("arn: arn_pci_setup(): "
"failed to enable bus mastering\n");
return (EIO);
}
ARN_DBG((ARN_DBG_INIT, "arn: arn_pci_setup(): "
"set command reg to 0x%x \n", command));
return (0);
}
static void
arn_get_hw_encap(struct arn_softc *sc)
{
ieee80211com_t *ic;
struct ath_hal *ah;
ic = (ieee80211com_t *)sc;
ah = sc->sc_ah;
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_AES_CCM, NULL))
ic->ic_caps |= IEEE80211_C_AES_CCM;
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_AES_OCB, NULL))
ic->ic_caps |= IEEE80211_C_AES;
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_TKIP, NULL))
ic->ic_caps |= IEEE80211_C_TKIP;
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_WEP, NULL))
ic->ic_caps |= IEEE80211_C_WEP;
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_MIC, NULL))
ic->ic_caps |= IEEE80211_C_TKIPMIC;
}
static void
arn_setup_ht_cap(struct arn_softc *sc)
{
#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
/* LINTED E_FUNC_SET_NOT_USED */
uint8_t tx_streams;
uint8_t rx_streams;
arn_ht_conf *ht_info = &sc->sc_ht_conf;
ht_info->ht_supported = B_TRUE;
/* Todo: IEEE80211_HTCAP_SMPS */
ht_info->cap = IEEE80211_HTCAP_CHWIDTH40|
IEEE80211_HTCAP_SHORTGI40 |
IEEE80211_HTCAP_DSSSCCK40;
ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
/* set up supported mcs set */
(void) memset(&ht_info->rx_mcs_mask, 0, sizeof (ht_info->rx_mcs_mask));
tx_streams =
!(sc->sc_ah->ah_caps.tx_chainmask &
(sc->sc_ah->ah_caps.tx_chainmask - 1)) ? 1 : 2;
rx_streams =
!(sc->sc_ah->ah_caps.rx_chainmask &
(sc->sc_ah->ah_caps.rx_chainmask - 1)) ? 1 : 2;
ht_info->rx_mcs_mask[0] = 0xff;
if (rx_streams >= 2)
ht_info->rx_mcs_mask[1] = 0xff;
}
/* xxx should be used for ht rate set negotiating ? */
static void
arn_overwrite_11n_rateset(struct arn_softc *sc)
{
uint8_t *ht_rs = sc->sc_ht_conf.rx_mcs_mask;
int mcs_idx, mcs_count = 0;
int i, j;
(void) memset(&ieee80211_rateset_11n, 0,
sizeof (ieee80211_rateset_11n));
for (i = 0; i < 10; i++) {
for (j = 0; j < 8; j++) {
if (ht_rs[i] & (1 << j)) {
mcs_idx = i * 8 + j;
if (mcs_idx >= IEEE80211_HTRATE_MAXSIZE) {
break;
}
ieee80211_rateset_11n.rs_rates[mcs_idx] =
(uint8_t)mcs_idx;
mcs_count++;
}
}
}
ieee80211_rateset_11n.rs_nrates = (uint8_t)mcs_count;
ARN_DBG((ARN_DBG_RATE, "arn_overwrite_11n_rateset(): "
"MCS rate set supported by this station is as follows:\n"));
for (i = 0; i < ieee80211_rateset_11n.rs_nrates; i++) {
ARN_DBG((ARN_DBG_RATE, "MCS rate %d is %d\n",
i, ieee80211_rateset_11n.rs_rates[i]));
}
}
/*
* Update WME parameters for a transmit queue.
*/
static int
arn_tx_queue_update(struct arn_softc *sc, int ac)
{
#define ATH_EXPONENT_TO_VALUE(v) ((1<<v)-1)
#define ATH_TXOP_TO_US(v) (v<<5)
ieee80211com_t *ic = (ieee80211com_t *)sc;
struct ath_txq *txq;
struct wmeParams *wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
struct ath_hal *ah = sc->sc_ah;
struct ath9k_tx_queue_info qi;
txq = &sc->sc_txq[arn_get_hal_qnum(ac, sc)];
(void) ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi);
/*
* TXQ_FLAG_TXOKINT_ENABLE = 0x0001
* TXQ_FLAG_TXERRINT_ENABLE = 0x0001
* TXQ_FLAG_TXDESCINT_ENABLE = 0x0002
* TXQ_FLAG_TXEOLINT_ENABLE = 0x0004
* TXQ_FLAG_TXURNINT_ENABLE = 0x0008
* TXQ_FLAG_BACKOFF_DISABLE = 0x0010
* TXQ_FLAG_COMPRESSION_ENABLE = 0x0020
* TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE = 0x0040
* TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE = 0x0080
*/
/* xxx should update these flags here? */
#if 0
qi.tqi_qflags = TXQ_FLAG_TXOKINT_ENABLE |
TXQ_FLAG_TXERRINT_ENABLE |
TXQ_FLAG_TXDESCINT_ENABLE |
TXQ_FLAG_TXURNINT_ENABLE;
#endif
qi.tqi_aifs = wmep->wmep_aifsn;
qi.tqi_cwmin = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
qi.tqi_readyTime = 0;
qi.tqi_burstTime = ATH_TXOP_TO_US(wmep->wmep_txopLimit);
ARN_DBG((ARN_DBG_INIT,
"%s:"
"Q%u"
"qflags 0x%x"
"aifs %u"
"cwmin %u"
"cwmax %u"
"burstTime %u\n",
__func__,
txq->axq_qnum,
qi.tqi_qflags,
qi.tqi_aifs,
qi.tqi_cwmin,
qi.tqi_cwmax,
qi.tqi_burstTime));
if (!ath9k_hw_set_txq_props(ah, txq->axq_qnum, &qi)) {
arn_problem("unable to update hardware queue "
"parameters for %s traffic!\n",
ieee80211_wme_acnames[ac]);
return (0);
} else {
/* push to H/W */
(void) ath9k_hw_resettxqueue(ah, txq->axq_qnum);
return (1);
}
#undef ATH_TXOP_TO_US
#undef ATH_EXPONENT_TO_VALUE
}
/* Update WME parameters */
static int
arn_wme_update(ieee80211com_t *ic)
{
struct arn_softc *sc = (struct arn_softc *)ic;
/* updateing */
return (!arn_tx_queue_update(sc, WME_AC_BE) ||
!arn_tx_queue_update(sc, WME_AC_BK) ||
!arn_tx_queue_update(sc, WME_AC_VI) ||
!arn_tx_queue_update(sc, WME_AC_VO) ? EIO : 0);
}
/*
* Update tx/rx chainmask. For legacy association,
* hard code chainmask to 1x1, for 11n association, use
* the chainmask configuration.
*/
void
arn_update_chainmask(struct arn_softc *sc)
{
boolean_t is_ht = B_FALSE;
sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
is_ht = sc->sc_ht_conf.ht_supported;
if (is_ht) {
sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask;
sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask;
} else {
sc->sc_tx_chainmask = 1;
sc->sc_rx_chainmask = 1;
}
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"tx_chainmask = %d, rx_chainmask = %d\n",
sc->sc_tx_chainmask, sc->sc_rx_chainmask));
}
static int
arn_resume(dev_info_t *devinfo)
{
struct arn_softc *sc;
int ret = DDI_SUCCESS;
sc = ddi_get_soft_state(arn_soft_state_p, ddi_get_instance(devinfo));
if (sc == NULL) {
ARN_DBG((ARN_DBG_INIT, "ath: ath_resume(): "
"failed to get soft state\n"));
return (DDI_FAILURE);
}
ARN_LOCK(sc);
/*
* Set up config space command register(s). Refuse
* to resume on failure.
*/
if (arn_pci_setup(sc) != 0) {
ARN_DBG((ARN_DBG_INIT, "ath: ath_resume(): "
"ath_pci_setup() failed\n"));
ARN_UNLOCK(sc);
return (DDI_FAILURE);
}
if (!(sc->sc_flags & SC_OP_INVALID))
ret = arn_open(sc);
ARN_UNLOCK(sc);
return (ret);
}
static int
arn_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd)
{
struct arn_softc *sc;
int instance;
int status;
int32_t err;
uint16_t vendor_id;
uint16_t device_id;
uint32_t i;
uint32_t val;
char strbuf[32];
ieee80211com_t *ic;
struct ath_hal *ah;
wifi_data_t wd = { 0 };
mac_register_t *macp;
switch (cmd) {
case DDI_ATTACH:
break;
case DDI_RESUME:
return (arn_resume(devinfo));
default:
return (DDI_FAILURE);
}
instance = ddi_get_instance(devinfo);
if (ddi_soft_state_zalloc(arn_soft_state_p, instance) != DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: "
"%s: Unable to alloc softstate\n", __func__));
return (DDI_FAILURE);
}
sc = ddi_get_soft_state(arn_soft_state_p, ddi_get_instance(devinfo));
ic = (ieee80211com_t *)sc;
sc->sc_dev = devinfo;
mutex_init(&sc->sc_genlock, NULL, MUTEX_DRIVER, NULL);
mutex_init(&sc->sc_serial_rw, NULL, MUTEX_DRIVER, NULL);
mutex_init(&sc->sc_txbuflock, NULL, MUTEX_DRIVER, NULL);
mutex_init(&sc->sc_rxbuflock, NULL, MUTEX_DRIVER, NULL);
mutex_init(&sc->sc_resched_lock, NULL, MUTEX_DRIVER, NULL);
#ifdef ARN_IBSS
mutex_init(&sc->sc_bcbuflock, NULL, MUTEX_DRIVER, NULL);
#endif
sc->sc_flags |= SC_OP_INVALID;
err = pci_config_setup(devinfo, &sc->sc_cfg_handle);
if (err != DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"pci_config_setup() failed"));
goto attach_fail0;
}
if (arn_pci_setup(sc) != 0)
goto attach_fail1;
/* Cache line size set up */
arn_pci_config_cachesize(sc);
vendor_id = pci_config_get16(sc->sc_cfg_handle, PCI_CONF_VENID);
device_id = pci_config_get16(sc->sc_cfg_handle, PCI_CONF_DEVID);
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): vendor 0x%x, "
"device id 0x%x, cache size %d\n",
vendor_id, device_id,
pci_config_get8(sc->sc_cfg_handle, PCI_CONF_CACHE_LINESZ)));
pci_config_put8(sc->sc_cfg_handle, PCI_CONF_LATENCY_TIMER, 0xa8);
val = pci_config_get32(sc->sc_cfg_handle, 0x40);
if ((val & 0x0000ff00) != 0)
pci_config_put32(sc->sc_cfg_handle, 0x40, val & 0xffff00ff);
err = ddi_regs_map_setup(devinfo, 1,
&sc->mem, 0, 0, &arn_reg_accattr, &sc->sc_io_handle);
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"regs map1 = %x err=%d\n", sc->mem, err));
if (err != DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"ddi_regs_map_setup() failed"));
goto attach_fail1;
}
ah = ath9k_hw_attach(device_id, sc, sc->mem, &status);
if (ah == NULL) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to attach hw: H/W status %u\n",
status));
goto attach_fail2;
}
sc->sc_ah = ah;
ath9k_hw_getmac(ah, ic->ic_macaddr);
/* Get the hardware key cache size. */
sc->sc_keymax = ah->ah_caps.keycache_size;
if (sc->sc_keymax > ATH_KEYMAX) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"Warning, using only %u entries in %u key cache\n",
ATH_KEYMAX, sc->sc_keymax));
sc->sc_keymax = ATH_KEYMAX;
}
/*
* Reset the key cache since some parts do not
* reset the contents on initial power up.
*/
for (i = 0; i < sc->sc_keymax; i++)
(void) ath9k_hw_keyreset(ah, (uint16_t)i);
/*
* Mark key cache slots associated with global keys
* as in use. If we knew TKIP was not to be used we
* could leave the +32, +64, and +32+64 slots free.
* XXX only for splitmic.
*/
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
set_bit(i, sc->sc_keymap);
set_bit(i + 32, sc->sc_keymap);
set_bit(i + 64, sc->sc_keymap);
set_bit(i + 32 + 64, sc->sc_keymap);
}
/* Collect the channel list using the default country code */
err = arn_setup_channels(sc);
if (err == EINVAL) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"ERR:arn_setup_channels\n"));
goto attach_fail3;
}
/* default to STA mode */
sc->sc_ah->ah_opmode = ATH9K_M_STA;
/* Setup rate tables */
arn_rate_attach(sc);
arn_setup_rates(sc, IEEE80211_MODE_11A);
arn_setup_rates(sc, IEEE80211_MODE_11B);
arn_setup_rates(sc, IEEE80211_MODE_11G);
/* Setup current mode here */
arn_setcurmode(sc, ATH9K_MODE_11G);
/* 802.11g features */
if (sc->sc_have11g)
ic->ic_caps |= IEEE80211_C_SHPREAMBLE |
IEEE80211_C_SHSLOT; /* short slot time */
/* Temp workaround */
sc->sc_mrretry = 1;
sc->sc_config.ath_aggr_prot = 0;
/* Setup tx/rx descriptors */
err = arn_desc_alloc(devinfo, sc);
if (err != DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"failed to allocate descriptors: %d\n", err));
goto attach_fail3;
}
if ((sc->sc_tq = ddi_taskq_create(devinfo, "ath_taskq", 1,
TASKQ_DEFAULTPRI, 0)) == NULL) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"ERR:ddi_taskq_create\n"));
goto attach_fail4;
}
/*
* Allocate hardware transmit queues: one queue for
* beacon frames and one data queue for each QoS
* priority. Note that the hal handles reseting
* these queues at the needed time.
*/
#ifdef ARN_IBSS
sc->sc_beaconq = arn_beaconq_setup(ah);
if (sc->sc_beaconq == (-1)) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to setup a beacon xmit queue\n"));
goto attach_fail4;
}
#endif
#ifdef ARN_HOSTAP
sc->sc_cabq = arn_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
if (sc->sc_cabq == NULL) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to setup CAB xmit queue\n"));
goto attach_fail4;
}
sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME;
ath_cabq_update(sc);
#endif
for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++)
sc->sc_haltype2q[i] = -1;
/* Setup data queues */
/* NB: ensure BK queue is the lowest priority h/w queue */
if (!arn_tx_setup(sc, ATH9K_WME_AC_BK)) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to setup xmit queue for BK traffic\n"));
goto attach_fail4;
}
if (!arn_tx_setup(sc, ATH9K_WME_AC_BE)) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to setup xmit queue for BE traffic\n"));
goto attach_fail4;
}
if (!arn_tx_setup(sc, ATH9K_WME_AC_VI)) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to setup xmit queue for VI traffic\n"));
goto attach_fail4;
}
if (!arn_tx_setup(sc, ATH9K_WME_AC_VO)) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"unable to setup xmit queue for VO traffic\n"));
goto attach_fail4;
}
/*
* Initializes the noise floor to a reasonable default value.
* Later on this will be updated during ANI processing.
*/
sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR;
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_TKIP, NULL)) {
/*
* Whether we should enable h/w TKIP MIC.
* XXX: if we don't support WME TKIP MIC, then we wouldn't
* report WMM capable, so it's always safe to turn on
* TKIP MIC in this case.
*/
(void) ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
0, 1, NULL);
}
/* Get cipher releated capability information */
arn_get_hw_encap(sc);
/*
* Check whether the separate key cache entries
* are required to handle both tx+rx MIC keys.
* With split mic keys the number of stations is limited
* to 27 otherwise 59.
*/
if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_TKIP, NULL) &&
ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
ATH9K_CIPHER_MIC, NULL) &&
ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
0, NULL))
sc->sc_splitmic = 1;
/* turn on mcast key search if possible */
if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
(void) ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
1, NULL);
sc->sc_config.txpowlimit = ATH_TXPOWER_MAX;
sc->sc_config.txpowlimit_override = 0;
/* 11n Capabilities */
if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
sc->sc_flags |= SC_OP_TXAGGR;
sc->sc_flags |= SC_OP_RXAGGR;
arn_setup_ht_cap(sc);
arn_overwrite_11n_rateset(sc);
}
sc->sc_tx_chainmask = 1;
sc->sc_rx_chainmask = 1;
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"tx_chainmask = %d, rx_chainmask = %d\n",
sc->sc_tx_chainmask, sc->sc_rx_chainmask));
/* arn_update_chainmask(sc); */
(void) ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, B_TRUE, NULL);
sc->sc_defant = ath9k_hw_getdefantenna(ah);
ath9k_hw_getmac(ah, sc->sc_myaddr);
if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) {
ath9k_hw_getbssidmask(ah, sc->sc_bssidmask);
ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask);
(void) ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
}
/* set default value to short slot time */
sc->sc_slottime = ATH9K_SLOT_TIME_9;
(void) ath9k_hw_setslottime(ah, ATH9K_SLOT_TIME_9);
/* initialize beacon slots */
for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++)
sc->sc_bslot[i] = ATH_IF_ID_ANY;
/* Save MISC configurations */
sc->sc_config.swBeaconProcess = 1;
/* Support QoS/WME */
ic->ic_caps |= IEEE80211_C_WME;
ic->ic_wme.wme_update = arn_wme_update;
/* Support 802.11n/HT */
if (sc->sc_ht_conf.ht_supported) {
ic->ic_htcaps =
IEEE80211_HTCAP_CHWIDTH40 |
IEEE80211_HTCAP_SHORTGI40 |
IEEE80211_HTCAP_DSSSCCK40 |
IEEE80211_HTCAP_MAXAMSDU_7935 |
IEEE80211_HTC_HT |
IEEE80211_HTC_AMSDU |
IEEE80211_HTCAP_RXSTBC_2STREAM;
#ifdef ARN_TX_AGGREGATION
ic->ic_htcaps |= IEEE80211_HTC_AMPDU;
#endif
}
/* Header padding requested by driver */
ic->ic_flags |= IEEE80211_F_DATAPAD;
/* Support WPA/WPA2 */
ic->ic_caps |= IEEE80211_C_WPA;
#if 0
ic->ic_caps |= IEEE80211_C_TXFRAG; /* handle tx frags */
ic->ic_caps |= IEEE80211_C_BGSCAN; /* capable of bg scanning */
#endif
ic->ic_phytype = IEEE80211_T_HT;
ic->ic_opmode = IEEE80211_M_STA;
ic->ic_state = IEEE80211_S_INIT;
ic->ic_maxrssi = ARN_MAX_RSSI;
ic->ic_set_shortslot = arn_set_shortslot;
ic->ic_xmit = arn_tx;
ieee80211_attach(ic);
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"ic->ic_curchan->ich_freq: %d\n", ic->ic_curchan->ich_freq));
/* different instance has different WPA door */
(void) snprintf(ic->ic_wpadoor, MAX_IEEE80211STR, "%s_%s%d", WPA_DOOR,
ddi_driver_name(devinfo),
ddi_get_instance(devinfo));
if (sc->sc_ht_conf.ht_supported) {
sc->sc_recv_action = ic->ic_recv_action;
ic->ic_recv_action = arn_ampdu_recv_action;
// sc->sc_send_action = ic->ic_send_action;
// ic->ic_send_action = arn_ampdu_send_action;
ic->ic_ampdu_rxmax = sc->sc_ht_conf.ampdu_factor;
ic->ic_ampdu_density = sc->sc_ht_conf.ampdu_density;
ic->ic_ampdu_limit = ic->ic_ampdu_rxmax;
}
/* Override 80211 default routines */
sc->sc_newstate = ic->ic_newstate;
ic->ic_newstate = arn_newstate;
#ifdef ARN_IBSS
sc->sc_recv_mgmt = ic->ic_recv_mgmt;
ic->ic_recv_mgmt = arn_recv_mgmt;
#endif
ic->ic_watchdog = arn_watchdog;
ic->ic_node_alloc = arn_node_alloc;
ic->ic_node_free = arn_node_free;
ic->ic_crypto.cs_key_alloc = arn_key_alloc;
ic->ic_crypto.cs_key_delete = arn_key_delete;
ic->ic_crypto.cs_key_set = arn_key_set;
ieee80211_media_init(ic);
/*
* initialize default tx key
*/
ic->ic_def_txkey = 0;
sc->sc_rx_pend = 0;
(void) ath9k_hw_set_interrupts(sc->sc_ah, 0);
err = ddi_add_softintr(devinfo, DDI_SOFTINT_LOW,
&sc->sc_softint_id, NULL, 0, arn_softint_handler, (caddr_t)sc);
if (err != DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"ddi_add_softintr() failed....\n"));
goto attach_fail5;
}
if (ddi_get_iblock_cookie(devinfo, 0, &sc->sc_iblock)
!= DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"Can not get iblock cookie for INT\n"));
goto attach_fail6;
}
if (ddi_add_intr(devinfo, 0, NULL, NULL, arn_isr,
(caddr_t)sc) != DDI_SUCCESS) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"Can not set intr for ARN driver\n"));
goto attach_fail6;
}
/*
* Provide initial settings for the WiFi plugin; whenever this
* information changes, we need to call mac_plugindata_update()
*/
wd.wd_opmode = ic->ic_opmode;
wd.wd_secalloc = WIFI_SEC_NONE;
IEEE80211_ADDR_COPY(wd.wd_bssid, ic->ic_bss->in_bssid);
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"IEEE80211_ADDR_COPY(wd.wd_bssid, ic->ic_bss->in_bssid)"
"%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
wd.wd_bssid[0], wd.wd_bssid[1], wd.wd_bssid[2],
wd.wd_bssid[3], wd.wd_bssid[4], wd.wd_bssid[5]));
if ((macp = mac_alloc(MAC_VERSION)) == NULL) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"MAC version mismatch\n"));
goto attach_fail7;
}
macp->m_type_ident = MAC_PLUGIN_IDENT_WIFI;
macp->m_driver = sc;
macp->m_dip = devinfo;
macp->m_src_addr = ic->ic_macaddr;
macp->m_callbacks = &arn_m_callbacks;
macp->m_min_sdu = 0;
macp->m_max_sdu = IEEE80211_MTU;
macp->m_pdata = &wd;
macp->m_pdata_size = sizeof (wd);
err = mac_register(macp, &ic->ic_mach);
mac_free(macp);
if (err != 0) {
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"mac_register err %x\n", err));
goto attach_fail7;
}
/* Create minor node of type DDI_NT_NET_WIFI */
(void) snprintf(strbuf, sizeof (strbuf), "%s%d",
ARN_NODENAME, instance);
err = ddi_create_minor_node(devinfo, strbuf, S_IFCHR,
instance + 1, DDI_NT_NET_WIFI, 0);
if (err != DDI_SUCCESS)
ARN_DBG((ARN_DBG_ATTACH, "WARN: arn: arn_attach(): "
"Create minor node failed - %d\n", err));
/* Notify link is down now */
mac_link_update(ic->ic_mach, LINK_STATE_DOWN);
sc->sc_promisc = B_FALSE;
bzero(sc->sc_mcast_refs, sizeof (sc->sc_mcast_refs));
bzero(sc->sc_mcast_hash, sizeof (sc->sc_mcast_hash));
ARN_DBG((ARN_DBG_ATTACH, "arn: arn_attach(): "
"Atheros AR%s MAC/BB Rev:%x "
"AR%s RF Rev:%x: mem=0x%lx\n",
arn_mac_bb_name(ah->ah_macVersion),
ah->ah_macRev,
arn_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
ah->ah_phyRev,
(unsigned long)sc->mem));
/* XXX: hardware will not be ready until arn_open() being called */
sc->sc_flags |= SC_OP_INVALID;
sc->sc_isrunning = 0;
return (DDI_SUCCESS);
attach_fail7:
ddi_remove_intr(devinfo, 0, sc->sc_iblock);
attach_fail6:
ddi_remove_softintr(sc->sc_softint_id);
attach_fail5:
(void) ieee80211_detach(ic);
attach_fail4:
arn_desc_free(sc);
if (sc->sc_tq)
ddi_taskq_destroy(sc->sc_tq);
attach_fail3:
ath9k_hw_detach(ah);
attach_fail2:
ddi_regs_map_free(&sc->sc_io_handle);
attach_fail1:
pci_config_teardown(&sc->sc_cfg_handle);
attach_fail0:
sc->sc_flags |= SC_OP_INVALID;
/* cleanup tx queues */
mutex_destroy(&sc->sc_txbuflock);
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ARN_TXQ_SETUP(sc, i)) {
/* arn_tx_cleanupq(asc, &asc->sc_txq[i]); */
mutex_destroy(&((&sc->sc_txq[i])->axq_lock));
}
}
mutex_destroy(&sc->sc_rxbuflock);
mutex_destroy(&sc->sc_serial_rw);
mutex_destroy(&sc->sc_genlock);
mutex_destroy(&sc->sc_resched_lock);
#ifdef ARN_IBSS
mutex_destroy(&sc->sc_bcbuflock);
#endif
ddi_soft_state_free(arn_soft_state_p, instance);
return (DDI_FAILURE);
}
/*
* Suspend transmit/receive for powerdown
*/
static int
arn_suspend(struct arn_softc *sc)
{
ARN_LOCK(sc);
arn_close(sc);
ARN_UNLOCK(sc);
return (DDI_SUCCESS);
}
static int32_t
arn_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd)
{
struct arn_softc *sc;
int i;
sc = ddi_get_soft_state(arn_soft_state_p, ddi_get_instance(devinfo));
ASSERT(sc != NULL);
switch (cmd) {
case DDI_DETACH:
break;
case DDI_SUSPEND:
return (arn_suspend(sc));
default:
return (DDI_FAILURE);
}
if (mac_disable(sc->sc_isc.ic_mach) != 0)
return (DDI_FAILURE);
arn_stop_scantimer(sc);
arn_stop_caltimer(sc);
/* disable interrupts */
(void) ath9k_hw_set_interrupts(sc->sc_ah, 0);
/*
* Unregister from the MAC layer subsystem
*/
(void) mac_unregister(sc->sc_isc.ic_mach);
/* free intterrupt resources */
ddi_remove_intr(devinfo, 0, sc->sc_iblock);
ddi_remove_softintr(sc->sc_softint_id);
/*
* NB: the order of these is important:
* o call the 802.11 layer before detaching the hal to
* insure callbacks into the driver to delete global
* key cache entries can be handled
* o reclaim the tx queue data structures after calling
* the 802.11 layer as we'll get called back to reclaim
* node state and potentially want to use them
* o to cleanup the tx queues the hal is called, so detach
* it last
*/
ieee80211_detach(&sc->sc_isc);
arn_desc_free(sc);
ddi_taskq_destroy(sc->sc_tq);
if (!(sc->sc_flags & SC_OP_INVALID))
(void) ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
/* cleanup tx queues */
mutex_destroy(&sc->sc_txbuflock);
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ARN_TXQ_SETUP(sc, i)) {
arn_tx_cleanupq(sc, &sc->sc_txq[i]);
mutex_destroy(&((&sc->sc_txq[i])->axq_lock));
}
}
ath9k_hw_detach(sc->sc_ah);
/* free io handle */
ddi_regs_map_free(&sc->sc_io_handle);
pci_config_teardown(&sc->sc_cfg_handle);
/* destroy locks */
mutex_destroy(&sc->sc_genlock);
mutex_destroy(&sc->sc_serial_rw);
mutex_destroy(&sc->sc_rxbuflock);
mutex_destroy(&sc->sc_resched_lock);
#ifdef ARN_IBSS
mutex_destroy(&sc->sc_bcbuflock);
#endif
ddi_remove_minor_node(devinfo, NULL);
ddi_soft_state_free(arn_soft_state_p, ddi_get_instance(devinfo));
return (DDI_SUCCESS);
}
/*
* quiesce(9E) entry point.
*
* This function is called when the system is single-threaded at high
* PIL with preemption disabled. Therefore, this function must not be
* blocked.
*
* This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure.
* DDI_FAILURE indicates an error condition and should almost never happen.
*/
static int32_t
arn_quiesce(dev_info_t *devinfo)
{
struct arn_softc *sc;
int i;
struct ath_hal *ah;
sc = ddi_get_soft_state(arn_soft_state_p, ddi_get_instance(devinfo));
if (sc == NULL || (ah = sc->sc_ah) == NULL)
return (DDI_FAILURE);
/*
* Disable interrupts
*/
(void) ath9k_hw_set_interrupts(ah, 0);
/*
* Disable TX HW
*/
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ARN_TXQ_SETUP(sc, i))
(void) ath9k_hw_stoptxdma(ah, sc->sc_txq[i].axq_qnum);
}
/*
* Disable RX HW
*/
ath9k_hw_stoppcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
(void) ath9k_hw_stopdmarecv(ah);
drv_usecwait(3000);
/*
* Power down HW
*/
(void) ath9k_hw_phy_disable(ah);
return (DDI_SUCCESS);
}
DDI_DEFINE_STREAM_OPS(arn_dev_ops, nulldev, nulldev, arn_attach, arn_detach,
nodev, NULL, D_MP, NULL, arn_quiesce);
static struct modldrv arn_modldrv = {
&mod_driverops, /* Type of module. This one is a driver */
"arn-Atheros 9000 series driver:2.0", /* short description */
&arn_dev_ops /* driver specific ops */
};
static struct modlinkage modlinkage = {
MODREV_1, (void *)&arn_modldrv, NULL
};
int
_info(struct modinfo *modinfop)
{
return (mod_info(&modlinkage, modinfop));
}
int
_init(void)
{
int status;
status = ddi_soft_state_init
(&arn_soft_state_p, sizeof (struct arn_softc), 1);
if (status != 0)
return (status);
mutex_init(&arn_loglock, NULL, MUTEX_DRIVER, NULL);
mac_init_ops(&arn_dev_ops, "arn");
status = mod_install(&modlinkage);
if (status != 0) {
mac_fini_ops(&arn_dev_ops);
mutex_destroy(&arn_loglock);
ddi_soft_state_fini(&arn_soft_state_p);
}
return (status);
}
int
_fini(void)
{
int status;
status = mod_remove(&modlinkage);
if (status == 0) {
mac_fini_ops(&arn_dev_ops);
mutex_destroy(&arn_loglock);
ddi_soft_state_fini(&arn_soft_state_p);
}
return (status);
}