common/dtrace/profile.c

	profile.c revision ae115bc77f6fcde83175c75b4206dc2e50747966
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident   "%Z%%M% %I% %E% SMI"

#include <sys/errno.h>
#include <sys/stat.h>
#include <sys/modctl.h>
#include <sys/conf.h>
#include <sys/systm.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/cpuvar.h>
#include <sys/kmem.h>
#include <sys/strsubr.h>
#include <sys/dtrace.h>
#include <sys/cyclic.h>
#include <sys/atomic.h>

static dev_info_t *profile_devi;
static dtrace_provider_id_t profile_id;

/*
 * Regardless of platform, the stack frames look like this in the case of the
 * profile provider:
 *
 *  profile_fire
 *  cyclic_expire
 *  cyclic_fire
 *  [ cbe ]
 *  [ interrupt code ]
 *
 * On x86, there are five frames from the generic interrupt code; further, the
 * interrupted instruction appears as its own stack frame, giving us a total of
 * 10.
 *
 * On SPARC, the picture is further complicated because the compiler
 * optimizes away tail-calls -- so the following frames are optimized away:
 *
 *  profile_fire
 *  cyclic_expire
 *
 * This gives three frames.  However, on DEBUG kernels, the cyclic_expire
 * frame cannot be tail-call eliminated, yielding four frames in this case.
 *
 * All of the above constraints lead to the mess below.  Yes, the profile
 * provider should ideally figure this out on-the-fly by hitting one of its own
 * probes and then walking its own stack trace.  This is complicated, however,
 * and the static definition doesn't seem to be overly brittle.  Still, we
 * allow for a manual override in case we get it completely wrong.
 */
#ifdef __x86
#define PROF_ARTIFICIAL_FRAMES  10
#else
#ifdef __sparc
#ifdef DEBUG
#define PROF_ARTIFICIAL_FRAMES  4
#else
#define PROF_ARTIFICIAL_FRAMES  3
#endif
#endif
#endif

#define PROF_NAMELEN        15

#define PROF_PROFILE        0
#define PROF_TICK       1
#define PROF_PREFIX_PROFILE "profile-"
#define PROF_PREFIX_TICK    "tick-"

typedef struct profile_probe {
    char        prof_name[PROF_NAMELEN];
    dtrace_id_t prof_id;
    int     prof_kind;
    hrtime_t    prof_interval;
    cyclic_id_t prof_cyclic;
} profile_probe_t;

typedef struct profile_probe_percpu {
    hrtime_t    profc_expected;
    hrtime_t    profc_interval;
    profile_probe_t *profc_probe;
} profile_probe_percpu_t;

hrtime_t    profile_interval_min = NANOSEC / 5000;      /* 5000 hz */
int     profile_aframes = 0;                /* override */

static int profile_rates[] = {
    97, 199, 499, 997, 1999,
    4001, 4999, 0, 0, 0,
    0, 0, 0, 0, 0,
    0, 0, 0, 0, 0
};

static int profile_ticks[] = {
    1, 10, 100, 500, 1000,
    5000, 0, 0, 0, 0,
    0, 0, 0, 0, 0
};

/*
 * profile_max defines the upper bound on the number of profile probes that
 * can exist (this is to prevent malicious or clumsy users from exhausing
 * system resources by creating a slew of profile probes). At mod load time,
 * this gets its value from PROFILE_MAX_DEFAULT or profile-max-probes if it's
 * present in the profile.conf file.
 */
#define PROFILE_MAX_DEFAULT 1000    /* default max. number of probes */
static uint32_t profile_max;        /* maximum number of profile probes */
static uint32_t profile_total;  /* current number of profile probes */

static void
profile_fire(void *arg)
{
    profile_probe_percpu_t *pcpu = arg;
    profile_probe_t *prof = pcpu->profc_probe;
    hrtime_t late;

    late = dtrace_gethrtime() - pcpu->profc_expected;
    pcpu->profc_expected += pcpu->profc_interval;

    dtrace_probe(prof->prof_id, CPU->cpu_profile_pc,
        CPU->cpu_profile_upc, late, 0, 0);
}

static void
profile_tick(void *arg)
{
    profile_probe_t *prof = arg;

    dtrace_probe(prof->prof_id, CPU->cpu_profile_pc,
        CPU->cpu_profile_upc, 0, 0, 0);
}

static void
profile_create(hrtime_t interval, const char *name, int kind)
{
    profile_probe_t *prof;
    int nr_frames = PROF_ARTIFICIAL_FRAMES + dtrace_mach_aframes();

    if (profile_aframes)
        nr_frames = profile_aframes;

    if (interval < profile_interval_min)
        return;

    if (dtrace_probe_lookup(profile_id, NULL, NULL, name) != 0)
        return;

    atomic_add_32(&profile_total, 1);
    if (profile_total > profile_max) {
        atomic_add_32(&profile_total, -1);
        return;
    }

    prof = kmem_zalloc(sizeof (profile_probe_t), KM_SLEEP);
    (void) strcpy(prof->prof_name, name);
    prof->prof_interval = interval;
    prof->prof_cyclic = CYCLIC_NONE;
    prof->prof_kind = kind;
    prof->prof_id = dtrace_probe_create(profile_id,
        NULL, NULL, name, nr_frames, prof);
}

/*ARGSUSED*/
static void
profile_provide(void *arg, const dtrace_probedesc_t *desc)
{
    int i, j, rate, kind;
    hrtime_t val = 0, mult = 1, len;
    const char *name, *suffix = NULL;

    const struct {
        char *prefix;
        int kind;
    } types[] = {
        { PROF_PREFIX_PROFILE, PROF_PROFILE },
        { PROF_PREFIX_TICK, PROF_TICK },
        { NULL, NULL }
    };

    const struct {
        char *name;
        hrtime_t mult;
    } suffixes[] = {
        { "ns",     NANOSEC / NANOSEC },
        { "nsec",   NANOSEC / NANOSEC },
        { "us",     NANOSEC / MICROSEC },
        { "usec",   NANOSEC / MICROSEC },
        { "ms",     NANOSEC / MILLISEC },
        { "msec",   NANOSEC / MILLISEC },
        { "s",      NANOSEC / SEC },
        { "sec",    NANOSEC / SEC },
        { "m",      NANOSEC * (hrtime_t)60 },
        { "min",    NANOSEC * (hrtime_t)60 },
        { "h",      NANOSEC * (hrtime_t)(60 * 60) },
        { "hour",   NANOSEC * (hrtime_t)(60 * 60) },
        { "d",      NANOSEC * (hrtime_t)(24 * 60 * 60) },
        { "day",    NANOSEC * (hrtime_t)(24 * 60 * 60) },
        { "hz",     0 },
        { NULL }
    };

    if (desc == NULL) {
        char n[PROF_NAMELEN];

        /*
         * If no description was provided, provide all of our probes.
         */
        for (i = 0; i < sizeof (profile_rates) / sizeof (int); i++) {
            if ((rate = profile_rates[i]) == 0)
                continue;

            (void) snprintf(n, PROF_NAMELEN, "%s%d",
                PROF_PREFIX_PROFILE, rate);
            profile_create(NANOSEC / rate, n, PROF_PROFILE);
        }

        for (i = 0; i < sizeof (profile_ticks) / sizeof (int); i++) {
            if ((rate = profile_ticks[i]) == 0)
                continue;

            (void) snprintf(n, PROF_NAMELEN, "%s%d",
                PROF_PREFIX_TICK, rate);
            profile_create(NANOSEC / rate, n, PROF_TICK);
        }

        return;
    }

    name = desc->dtpd_name;

    for (i = 0; types[i].prefix != NULL; i++) {
        len = strlen(types[i].prefix);

        if (strncmp(name, types[i].prefix, len) != 0)
            continue;
        break;
    }

    if (types[i].prefix == NULL)
        return;

    kind = types[i].kind;
    j = strlen(name) - len;

    /*
     * We need to start before any time suffix.
     */
    for (j = strlen(name); j >= len; j--) {
        if (name[j] >= '0' && name[j] <= '9')
            break;
        suffix = &name[j];
    }

    ASSERT(suffix != NULL);

    /*
     * Now determine the numerical value present in the probe name.
     */
    for (; j >= len; j--) {
        if (name[j] < '0' || name[j] > '9')
            return;

        val += (name[j] - '0') * mult;
        mult *= (hrtime_t)10;
    }

    if (val == 0)
        return;

    /*
     * Look-up the suffix to determine the multiplier.
     */
    for (i = 0, mult = 0; suffixes[i].name != NULL; i++) {
        if (strcasecmp(suffixes[i].name, suffix) == 0) {
            mult = suffixes[i].mult;
            break;
        }
    }

    if (suffixes[i].name == NULL && *suffix != '\0')
        return;

    if (mult == 0) {
        /*
         * The default is frequency-per-second.
         */
        val = NANOSEC / val;
    } else {
        val *= mult;
    }

    profile_create(val, name, kind);
}

/*ARGSUSED*/
static void
profile_destroy(void *arg, dtrace_id_t id, void *parg)
{
    profile_probe_t *prof = parg;

    ASSERT(prof->prof_cyclic == CYCLIC_NONE);
    kmem_free(prof, sizeof (profile_probe_t));

    ASSERT(profile_total >= 1);
    atomic_add_32(&profile_total, -1);
}

/*ARGSUSED*/
static void
profile_online(void *arg, cpu_t *cpu, cyc_handler_t *hdlr, cyc_time_t *when)
{
    profile_probe_t *prof = arg;
    profile_probe_percpu_t *pcpu;

    pcpu = kmem_zalloc(sizeof (profile_probe_percpu_t), KM_SLEEP);
    pcpu->profc_probe = prof;

    hdlr->cyh_func = profile_fire;
    hdlr->cyh_arg = pcpu;
    hdlr->cyh_level = CY_HIGH_LEVEL;

    when->cyt_interval = prof->prof_interval;
    when->cyt_when = dtrace_gethrtime() + when->cyt_interval;

    pcpu->profc_expected = when->cyt_when;
    pcpu->profc_interval = when->cyt_interval;
}

/*ARGSUSED*/
static void
profile_offline(void *arg, cpu_t *cpu, void *oarg)
{
    profile_probe_percpu_t *pcpu = oarg;

    ASSERT(pcpu->profc_probe == arg);
    kmem_free(pcpu, sizeof (profile_probe_percpu_t));
}

/*ARGSUSED*/
static void
profile_enable(void *arg, dtrace_id_t id, void *parg)
{
    profile_probe_t *prof = parg;
    cyc_omni_handler_t omni;
    cyc_handler_t hdlr;
    cyc_time_t when;

    ASSERT(prof->prof_interval != 0);
    ASSERT(MUTEX_HELD(&cpu_lock));

    if (prof->prof_kind == PROF_TICK) {
        hdlr.cyh_func = profile_tick;
        hdlr.cyh_arg = prof;
        hdlr.cyh_level = CY_HIGH_LEVEL;

        when.cyt_interval = prof->prof_interval;
        when.cyt_when = dtrace_gethrtime() + when.cyt_interval;
    } else {
        ASSERT(prof->prof_kind == PROF_PROFILE);
        omni.cyo_online = profile_online;
        omni.cyo_offline = profile_offline;
        omni.cyo_arg = prof;
    }

    if (prof->prof_kind == PROF_TICK) {
        prof->prof_cyclic = cyclic_add(&hdlr, &when);
    } else {
        prof->prof_cyclic = cyclic_add_omni(&omni);
    }
}

/*ARGSUSED*/
static void
profile_disable(void *arg, dtrace_id_t id, void *parg)
{
    profile_probe_t *prof = parg;

    ASSERT(prof->prof_cyclic != CYCLIC_NONE);
    ASSERT(MUTEX_HELD(&cpu_lock));

    cyclic_remove(prof->prof_cyclic);
    prof->prof_cyclic = CYCLIC_NONE;
}

/*ARGSUSED*/
static int
profile_usermode(void *arg, dtrace_id_t id, void *parg)
{
    return (CPU->cpu_profile_pc == 0);
}

static dtrace_pattr_t profile_attr = {
{ DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON },
{ DTRACE_STABILITY_UNSTABLE, DTRACE_STABILITY_UNSTABLE, DTRACE_CLASS_UNKNOWN },
{ DTRACE_STABILITY_PRIVATE, DTRACE_STABILITY_PRIVATE, DTRACE_CLASS_UNKNOWN },
{ DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON },
{ DTRACE_STABILITY_EVOLVING, DTRACE_STABILITY_EVOLVING, DTRACE_CLASS_COMMON },
};

static dtrace_pops_t profile_pops = {
    profile_provide,
    NULL,
    profile_enable,
    profile_disable,
    NULL,
    NULL,
    NULL,
    NULL,
    profile_usermode,
    profile_destroy
};

static int
profile_attach(dev_info_t *devi, ddi_attach_cmd_t cmd)
{
    switch (cmd) {
    case DDI_ATTACH:
        break;
    case DDI_RESUME:
        return (DDI_SUCCESS);
    default:
        return (DDI_FAILURE);
    }

    if (ddi_create_minor_node(devi, "profile", S_IFCHR, 0,
        DDI_PSEUDO, NULL) == DDI_FAILURE ||
        dtrace_register("profile", &profile_attr,
        DTRACE_PRIV_KERNEL | DTRACE_PRIV_USER, NULL,
        &profile_pops, NULL, &profile_id) != 0) {
        ddi_remove_minor_node(devi, NULL);
        return (DDI_FAILURE);
    }

    profile_max = ddi_getprop(DDI_DEV_T_ANY, devi, DDI_PROP_DONTPASS,
        "profile-max-probes", PROFILE_MAX_DEFAULT);

    ddi_report_dev(devi);
    profile_devi = devi;
    return (DDI_SUCCESS);
}

static int
profile_detach(dev_info_t *devi, ddi_detach_cmd_t cmd)
{
    switch (cmd) {
    case DDI_DETACH:
        break;
    case DDI_SUSPEND:
        return (DDI_SUCCESS);
    default:
        return (DDI_FAILURE);
    }

    if (dtrace_unregister(profile_id) != 0)
        return (DDI_FAILURE);

    ddi_remove_minor_node(devi, NULL);
    return (DDI_SUCCESS);
}

/*ARGSUSED*/
static int
profile_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
{
    int error;

    switch (infocmd) {
    case DDI_INFO_DEVT2DEVINFO:
        *result = (void *)profile_devi;
        error = DDI_SUCCESS;
        break;
    case DDI_INFO_DEVT2INSTANCE:
        *result = (void *)0;
        error = DDI_SUCCESS;
        break;
    default:
        error = DDI_FAILURE;
    }
    return (error);
}

/*ARGSUSED*/
static int
profile_open(dev_t *devp, int flag, int otyp, cred_t *cred_p)
{
    return (0);
}

static struct cb_ops profile_cb_ops = {
    profile_open,       /* open */
    nodev,          /* close */
    nulldev,        /* strategy */
    nulldev,        /* print */
    nodev,          /* dump */
    nodev,          /* read */
    nodev,          /* write */
    nodev,          /* ioctl */
    nodev,          /* devmap */
    nodev,          /* mmap */
    nodev,          /* segmap */
    nochpoll,       /* poll */
    ddi_prop_op,        /* cb_prop_op */
    0,          /* streamtab  */
    D_NEW | D_MP        /* Driver compatibility flag */
};

static struct dev_ops profile_ops = {
    DEVO_REV,       /* devo_rev, */
    0,          /* refcnt  */
    profile_info,       /* get_dev_info */
    nulldev,        /* identify */
    nulldev,        /* probe */
    profile_attach,     /* attach */
    profile_detach,     /* detach */
    nodev,          /* reset */
    &profile_cb_ops,    /* driver operations */
    NULL,           /* bus operations */
    nodev           /* dev power */
};

/*
 * Module linkage information for the kernel.
 */
static struct modldrv modldrv = {
    &mod_driverops,     /* module type (this is a pseudo driver) */
    "Profile Interrupt Tracing",    /* name of module */
    &profile_ops,       /* driver ops */
};

static struct modlinkage modlinkage = {
    MODREV_1,
    (void *)&modldrv,
    NULL
};

int
_init(void)
{
    return (mod_install(&modlinkage));
}

int
_info(struct modinfo *modinfop)
{
    return (mod_info(&modlinkage, modinfop));
}

int
_fini(void)
{
    return (mod_remove(&modlinkage));
}