common/cpr/cpr_mod.c

	cpr_mod.c revision b97d6ca7333c353b6ca20c20c99fb1be8d32a8de
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 * Copyright (c) 2011 Bayard G. Bell. All rights reserved.
 * Copyright 2012 Milan Jurik. All rights reserved.
 */

/*
 * System call to checkpoint and resume the currently running kernel
 */
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/modctl.h>
#include <sys/syscall.h>
#include <sys/cred.h>
#include <sys/uadmin.h>
#include <sys/cmn_err.h>
#include <sys/systm.h>
#include <sys/cpr.h>
#include <sys/swap.h>
#include <sys/vfs.h>
#include <sys/autoconf.h>
#include <sys/machsystm.h>

extern int i_cpr_is_supported(int sleeptype);
extern int cpr_is_ufs(struct vfs *);
extern int cpr_is_zfs(struct vfs *);
extern int cpr_check_spec_statefile(void);
extern int cpr_reusable_mount_check(void);
extern int i_cpr_reusable_supported(void);
extern int i_cpr_reusefini(void);
extern struct mod_ops mod_miscops;

extern int cpr_init(int);
extern void cpr_done(void);
extern void i_cpr_stop_other_cpus(void);
extern int i_cpr_power_down(int);

#if defined(__sparc)
extern void cpr_forget_cprconfig(void);
#endif

static struct modlmisc modlmisc = {
    &mod_miscops, "checkpoint resume"
};

static struct modlinkage modlinkage = {
    MODREV_1, (void *)&modlmisc, NULL
};

int cpr_reusable_mode;

kmutex_t    cpr_slock;  /* cpr serial lock */
cpr_t       cpr_state;
int     cpr_debug;
int     cpr_test_mode; /* true if called via uadmin testmode */
int     cpr_test_point = LOOP_BACK_NONE;    /* cpr test point */
int     cpr_mp_enable = 0;  /* set to 1 to enable MP suspend */
major_t     cpr_device = 0;     /* major number for S3 on one device */

/*
 * All the loadable module related code follows
 */
int
_init(void)
{
    register int e;

    if ((e = mod_install(&modlinkage)) == 0) {
        mutex_init(&cpr_slock, NULL, MUTEX_DEFAULT, NULL);
    }
    return (e);
}

int
_fini(void)
{
    register int e;

    if ((e = mod_remove(&modlinkage)) == 0) {
        mutex_destroy(&cpr_slock);
    }
    return (e);
}

int
_info(struct modinfo *modinfop)
{
    return (mod_info(&modlinkage, modinfop));
}

static
int
atoi(char *p)
{
    int i;

    i = (*p++ - '0');

    while (*p != '\0')
        i = 10 * i + (*p++ - '0');

    return (i);
}

int
cpr(int fcn, void *mdep)
{

#if defined(__sparc)
    static const char noswapstr[] = "reusable statefile requires "
        "that no swap area be configured.\n";
    static const char blockstr[] = "reusable statefile must be "
        "a block device.  See power.conf(4) and pmconfig(1M).\n";
    static const char normalfmt[] = "cannot run normal "
        "checkpoint/resume when in reusable statefile mode. "
        "use uadmin A_FREEZE AD_REUSEFINI (uadmin %d %d) "
        "to exit reusable statefile mode.\n";
    static const char modefmt[] = "%s in reusable mode.\n";
#endif
    register int rc = 0;
    int cpr_sleeptype;

    /*
     * First, reject commands that we don't (yet) support on this arch.
     * This is easier to understand broken out like this than grotting
     * through the second switch below.
     */

    switch (fcn) {
#if defined(__sparc)
    case AD_CHECK_SUSPEND_TO_RAM:
    case AD_SUSPEND_TO_RAM:
        return (ENOTSUP);
    case AD_CHECK_SUSPEND_TO_DISK:
    case AD_SUSPEND_TO_DISK:
    case AD_CPR_REUSEINIT:
    case AD_CPR_NOCOMPRESS:
    case AD_CPR_FORCE:
    case AD_CPR_REUSABLE:
    case AD_CPR_REUSEFINI:
    case AD_CPR_TESTZ:
    case AD_CPR_TESTNOZ:
    case AD_CPR_TESTHALT:
    case AD_CPR_SUSP_DEVICES:
        cpr_sleeptype = CPR_TODISK;
        break;
#endif
#if defined(__x86)
    case AD_CHECK_SUSPEND_TO_DISK:
    case AD_SUSPEND_TO_DISK:
    case AD_CPR_REUSEINIT:
    case AD_CPR_NOCOMPRESS:
    case AD_CPR_FORCE:
    case AD_CPR_REUSABLE:
    case AD_CPR_REUSEFINI:
    case AD_CPR_TESTZ:
    case AD_CPR_TESTNOZ:
    case AD_CPR_TESTHALT:
    case AD_CPR_PRINT:
        return (ENOTSUP);
    /* The DEV_* values need to be removed after sys-syspend is fixed */
    case DEV_CHECK_SUSPEND_TO_RAM:
    case DEV_SUSPEND_TO_RAM:
    case AD_CPR_SUSP_DEVICES:
    case AD_CHECK_SUSPEND_TO_RAM:
    case AD_SUSPEND_TO_RAM:
    case AD_LOOPBACK_SUSPEND_TO_RAM_PASS:
    case AD_LOOPBACK_SUSPEND_TO_RAM_FAIL:
    case AD_FORCE_SUSPEND_TO_RAM:
    case AD_DEVICE_SUSPEND_TO_RAM:
        cpr_sleeptype = CPR_TORAM;
        break;
#endif
    }
#if defined(__sparc)
    /*
     * Need to know if we're in reusable mode, but we will likely have
     * rebooted since REUSEINIT, so we have to get the info from the
     * file system
     */
    if (!cpr_reusable_mode)
        cpr_reusable_mode = cpr_get_reusable_mode();

    cpr_forget_cprconfig();
#endif

    switch (fcn) {

#if defined(__sparc)
    case AD_CPR_REUSEINIT:
        if (!i_cpr_reusable_supported())
            return (ENOTSUP);
        if (!cpr_statefile_is_spec()) {
            cpr_err(CE_CONT, blockstr);
            return (EINVAL);
        }
        if ((rc = cpr_check_spec_statefile()) != 0)
            return (rc);
        if (swapinfo) {
            cpr_err(CE_CONT, noswapstr);
            return (EINVAL);
        }
        cpr_test_mode = 0;
        break;

    case AD_CPR_NOCOMPRESS:
    case AD_CPR_COMPRESS:
    case AD_CPR_FORCE:
        if (cpr_reusable_mode) {
            cpr_err(CE_CONT, normalfmt, A_FREEZE, AD_REUSEFINI);
            return (ENOTSUP);
        }
        cpr_test_mode = 0;
        break;

    case AD_CPR_REUSABLE:
        if (!i_cpr_reusable_supported())
            return (ENOTSUP);
        if (!cpr_statefile_is_spec()) {
            cpr_err(CE_CONT, blockstr);
            return (EINVAL);
        }
        if ((rc = cpr_check_spec_statefile()) != 0)
            return (rc);
        if (swapinfo) {
            cpr_err(CE_CONT, noswapstr);
            return (EINVAL);
        }
        if ((rc = cpr_reusable_mount_check()) != 0)
            return (rc);
        cpr_test_mode = 0;
        break;

    case AD_CPR_REUSEFINI:
        if (!i_cpr_reusable_supported())
            return (ENOTSUP);
        cpr_test_mode = 0;
        break;

    case AD_CPR_TESTZ:
    case AD_CPR_TESTNOZ:
    case AD_CPR_TESTHALT:
        if (cpr_reusable_mode) {
            cpr_err(CE_CONT, normalfmt, A_FREEZE, AD_REUSEFINI);
            return (ENOTSUP);
        }
        cpr_test_mode = 1;
        break;

    case AD_CPR_CHECK:
        if (!i_cpr_is_supported(cpr_sleeptype) || cpr_reusable_mode)
            return (ENOTSUP);
        return (0);

    case AD_CPR_PRINT:
        CPR_STAT_EVENT_END("POST CPR DELAY");
        cpr_stat_event_print();
        return (0);
#endif

    case AD_CPR_DEBUG0:
        cpr_debug = 0;
        return (0);

    case AD_CPR_DEBUG1:
    case AD_CPR_DEBUG2:
    case AD_CPR_DEBUG3:
    case AD_CPR_DEBUG4:
    case AD_CPR_DEBUG5:
    case AD_CPR_DEBUG7:
    case AD_CPR_DEBUG8:
        cpr_debug |= CPR_DEBUG_BIT(fcn);
        return (0);

    case AD_CPR_DEBUG9:
        cpr_debug |= CPR_DEBUG6;
        return (0);

    /* The DEV_* values need to be removed after sys-syspend is fixed */
    case DEV_CHECK_SUSPEND_TO_RAM:
    case DEV_SUSPEND_TO_RAM:
    case AD_CHECK_SUSPEND_TO_RAM:
    case AD_SUSPEND_TO_RAM:
        cpr_test_point = LOOP_BACK_NONE;
        break;

    case AD_LOOPBACK_SUSPEND_TO_RAM_PASS:
        cpr_test_point = LOOP_BACK_PASS;
        break;

    case AD_LOOPBACK_SUSPEND_TO_RAM_FAIL:
        cpr_test_point = LOOP_BACK_FAIL;
        break;

    case AD_FORCE_SUSPEND_TO_RAM:
        cpr_test_point = FORCE_SUSPEND_TO_RAM;
        break;

    case AD_DEVICE_SUSPEND_TO_RAM:
        if (mdep == NULL) {
            /* Didn't pass enough arguments */
            return (EINVAL);
        }
        cpr_test_point = DEVICE_SUSPEND_TO_RAM;
        cpr_device = (major_t)atoi((char *)mdep);
        break;

    case AD_CPR_SUSP_DEVICES:
        cpr_test_point = FORCE_SUSPEND_TO_RAM;
        if (cpr_suspend_devices(ddi_root_node()) != DDI_SUCCESS)
            cmn_err(CE_WARN,
                "Some devices did not suspend "
                "and may be unusable");
        (void) cpr_resume_devices(ddi_root_node(), 0);
        return (0);

    default:
        return (ENOTSUP);
    }

    if (!i_cpr_is_supported(cpr_sleeptype))
        return (ENOTSUP);

#if defined(__sparc)
    if ((cpr_sleeptype == CPR_TODISK &&
        !cpr_is_ufs(rootvfs) && !cpr_is_zfs(rootvfs)))
        return (ENOTSUP);
#endif

    if (fcn == AD_CHECK_SUSPEND_TO_RAM ||
        fcn == DEV_CHECK_SUSPEND_TO_RAM) {
        ASSERT(i_cpr_is_supported(cpr_sleeptype));
        return (0);
    }

#if defined(__sparc)
    if (fcn == AD_CPR_REUSEINIT) {
        if (mutex_tryenter(&cpr_slock) == 0)
            return (EBUSY);
        if (cpr_reusable_mode) {
            cpr_err(CE_CONT, modefmt, "already");
            mutex_exit(&cpr_slock);
            return (EBUSY);
        }
        rc = i_cpr_reuseinit();
        mutex_exit(&cpr_slock);
        return (rc);
    }

    if (fcn == AD_CPR_REUSEFINI) {
        if (mutex_tryenter(&cpr_slock) == 0)
            return (EBUSY);
        if (!cpr_reusable_mode) {
            cpr_err(CE_CONT, modefmt, "not");
            mutex_exit(&cpr_slock);
            return (EINVAL);
        }
        rc = i_cpr_reusefini();
        mutex_exit(&cpr_slock);
        return (rc);
    }
#endif

    /*
     * acquire cpr serial lock and init cpr state structure.
     */
    if (rc = cpr_init(fcn))
        return (rc);

#if defined(__sparc)
    if (fcn == AD_CPR_REUSABLE) {
        if ((rc = i_cpr_check_cprinfo()) != 0)  {
            mutex_exit(&cpr_slock);
            return (rc);
        }
    }
#endif

    /*
     * Call the main cpr routine. If we are successful, we will be coming
     * down from the resume side, otherwise we are still in suspend.
     */
    cpr_err(CE_CONT, "System is being suspended");
    if (rc = cpr_main(cpr_sleeptype)) {
        CPR->c_flags |= C_ERROR;
        PMD(PMD_SX, ("cpr: Suspend operation failed.\n"))
        cpr_err(CE_NOTE, "Suspend operation failed.");
    } else if (CPR->c_flags & C_SUSPENDING) {

        /*
         * In the suspend to RAM case, by the time we get
         * control back we're already resumed
         */
        if (cpr_sleeptype == CPR_TORAM) {
            PMD(PMD_SX, ("cpr: cpr CPR_TORAM done\n"))
            cpr_done();
            return (rc);
        }

#if defined(__sparc)

        PMD(PMD_SX, ("cpr: Suspend operation succeeded.\n"))
        /*
         * Back from a successful checkpoint
         */
        if (fcn == AD_CPR_TESTZ || fcn == AD_CPR_TESTNOZ) {
            mdboot(0, AD_BOOT, "", B_FALSE);
            /* NOTREACHED */
        }

        /* make sure there are no more changes to the device tree */
        PMD(PMD_SX, ("cpr: dev tree freeze\n"))
        devtree_freeze();

        /*
         * stop other cpus and raise our priority.  since there is only
         * one active cpu after this, and our priority will be too high
         * for us to be preempted, we're essentially single threaded
         * from here on out.
         */
        PMD(PMD_SX, ("cpr: stop other cpus\n"))
        i_cpr_stop_other_cpus();
        PMD(PMD_SX, ("cpr: spl6\n"))
        (void) spl6();

        /*
         * try and reset leaf devices.  reset_leaves() should only
         * be called when there are no other threads that could be
         * accessing devices
         */
        PMD(PMD_SX, ("cpr: reset leaves\n"))
        reset_leaves();

        /*
         * If i_cpr_power_down() succeeds, it'll not return
         *
         * Drives with write-cache enabled need to flush
         * their cache.
         */
        if (fcn != AD_CPR_TESTHALT) {
            PMD(PMD_SX, ("cpr: power down\n"))
            (void) i_cpr_power_down(cpr_sleeptype);
        }
        ASSERT(cpr_sleeptype == CPR_TODISK);
        /* currently CPR_TODISK comes back via a boot path */
        CPR_DEBUG(CPR_DEBUG1, "(Done. Please Switch Off)\n");
        halt(NULL);
        /* NOTREACHED */
#endif
    }
    PMD(PMD_SX, ("cpr: cpr done\n"))
    cpr_done();
    return (rc);
}