gatekeeper.sh revision 9a70fc3be3b1e966bf78825cdb8d509963a6f0a1
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2008 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# Configuration variables for the runtime environment of the nightly
# build script and other tools for construction and packaging of releases.
# This script is sourced by 'nightly' and 'bldenv' to set up the environment
# for the build. This example is suitable for building a gate,
# which will contain the resulting packages and archives (builds of the gate
# are done in children and then the resulting archives, packages, and proto
# area are put into the parent for everyone to use). It is based off
# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do:
# DEBUG and non-DEBUG builds (-D)
# creates cpio archives for bfu (-a)
# checks for new interfaces in libraries (-A)
# runs 'make check' (-C)
# sends mail on completion (-m and the MAILTO variable)
# updates the protolist in the parent for children to compare with (-u)
# updates the proto area in the parent when done (-U)
# checks for changes in ELF runpaths (-r)
# checks for changes in unreferenced files (-f)
#
# This is a variable for the rest of the script - GATE doesn't matter to
# nightly itself
# CODEMGR_WS - where is your workspace at (or what should nightly name it)
# there is only one definition here, which assumes all the gate build machines
# (sparc and x86) are set up the same. But remember, this is a script, so
# you _could_ look at $MACH or `uname -n` and set these variables differently.
# PARENT_WS is used to determine the parent of this workspace. This is
# for the options that deal with the parent workspace (such as where the
# proto area will go).
#
# If you use this, it must be local (or nfs): nightly cannot copy
# over ssh or http.
# CLONE_WS is the workspace nightly should do a bringover from.
# CLOSED_CLONE_WS is the workspace from which nightly will acquire the
CLOSED_CLONE_WS="${CLONE_WS}/usr/closed"
export CLOSED_CLONE_WS
# This flag controls whether to build the closed source. If
# undefined, nightly(1) and bldenv(1) will set it according to whether
# the closed source tree is present. CLOSED_IS_PRESENT="no" means not
# building the closed sources.
# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT
# The bringover, if any, is done as STAFFER.
# Set STAFFER to your own login as gatekeeper or integration engineer.
# The point is to use group "staff" and avoid referencing the parent
# workspace as root.
# Some scripts optionally send mail messages to MAILTO.
#
# The project (see project(4)) under which to run this build. If not
# specified, the build is simply run in a new task in the current project.
BUILD_PROJECT=; export BUILD_PROJECT
# You should not need to change the next four lines
# REF_PROTO_LIST - for comparing the list of stuff in your proto area
# with. Generally this should be left alone, since you want to see differences
# between todays build and yesterdays.
#
# where cpio archives of the OS are placed. Usually this should be left
# alone too. Here they don't go in the build workspace, but in the parent.
# Since this is done as root, the build machine needs root acces to
# the parent over NFS.
#
# build environment variables, including version info for mcs, motd,
# motd, uname and boot messages. Mostly you shouldn't change this except
# when the release slips (nah) or when starting a new release.
#
#
# the RELEASE and RELEASE_DATE variables are set in Makefile.master;
# there might be special reasons to override them here, but that
# should not be the case in general
#
# RELEASE="5.10.1"; export RELEASE
# RELEASE_DATE="October 2007"; export RELEASE_DATE
# proto area in parent for optionally depositing a copy of headers and
# libraries corresponding to the protolibs target
#
#
# package creation variable. This put the packages in the parent.
#
# we want make to do as much as it can, just in case there's more than
# one problem. This is especially important with the gate, since multiple
# unrelated broken things can be integrated.
# mail back to devpro on every use.
# Build tools - don't set these unless you know what you're doing. These
# variables allows you to get the compilers and onbld files locally or
# through cachefs. Set BUILD_TOOLS to pull everything from one location.
# Alternately, you can set ONBLD_TOOLS to where you keep the contents of
# SUNWonbld and SPRO_ROOT to where you keep the compilers.
#
#BUILD_TOOLS=/opt; export BUILD_TOOLS
# This goes along with lint - it is a series of the form "A [y|n]" which
# means "go to directory A and run 'make lint'" Then mail me (y) the
# difference in the lint output. 'y' should only be used if the area you're
# linting is actually lint clean or you'll get lots of mail.
# You shouldn't need to change this though.
#LINTDIRS="$SRC y"; export LINTDIRS
#
# Reference to IA32 IHV workspace, proto area and packages
#
#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS
#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT
#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS
#
# Reference to binary-only IA32 IHV packages
#
#IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin
#export IA32_IHV_BINARY_PKGS
#
# Destination for sparc realmode package SUNWrmodu
#
#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly"
#export SPARC_RM_PKGARCHIVE
# Set this flag to 'n' to disable the automatic validation of the dmake
# version in use. The default is to check it.
#CHECK_DMAKE=y
# Set this flag to 'n' to disable the use of 'checkpaths'. The default,
# if the 'N' option is not specified, is to run this test.
#CHECK_PATHS=y
# Set this flag to 'y' to enable the use of elfsigncmp to validate the
# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS.
# The default is to not verify them.
#VERIFY_ELFSIGN=n
# BRINGOVER_FILES is the list of files nightly passes to bringover.
# If not set the default is "usr", but it can be used for bringing
# over deleted_files or other nifty directories.
#BRINGOVER_FILES="usr deleted_files"
# POST_NIGHTLY can be any command to be run at the end of nightly. See
# nightly(1) for interactions between environment variables and this command.
#POST_NIGHTLY=