developer.sh revision 40bc9153236fa42f7cbe2c25c5476e8703eb7894
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
#ident "%Z%%M% %I% %E% SMI"
#
# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# Configuration variables for the runtime environment of the nightly
# build script and other tools for construction and packaging of releases.
# This script is sourced by 'nightly' and 'bldenv' to set up the environment
# for the build. This example is suitable for building a developers workspace,
# which will contain the resulting packages and archives. It is based off
# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do:
# creates cpio archives for bfu (-a)
# runs 'make check' (-C)
# DEBUG and non-DEBUG builds (-D)
# sends mail on completion (-m and the MAILTO variable)
# checks for changes in ELF runpaths (-r)
#
# This is a variable for the rest of the script - GATE doesn't matter to
# nightly itself
# CODEMGR_WS - where is your workspace at (or what should nightly name it)
# PARENT_WS is used to determine the parent of this workspace. This is
# for the options that deal with the parent workspace (such as where the
# proto area will go).
# CLONE_WS is the workspace nightly should do a bringover from. Since it's
# clone instead of the gate (see the gate's README).
# This flag controls whether to build the closed source. If
# undefined, nightly(1) and bldenv(1) will set it according to whether
# the closed tree is present.
# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT
# The bringover, if any, is done as STAFFER.
# Set STAFFER to your own login as gatekeeper or developer
# The point is to use group "staff" and avoid referencing the parent
# workspace as root.
# Some scripts optionally send mail messages to MAILTO.
#
# The project (see project(4)) under which to run this build. If not
# specified, the build is simply run in a new task in the current project.
BUILD_PROJECT=; export BUILD_PROJECT
# You should not need to change the next four lines
# REF_PROTO_LIST - for comparing the list of stuff in your proto area
# with. Generally this should be left alone, since you want to see differences
# from your parent (the gate).
#
# where cpio archives of the OS are placed. Usually this should be left
# alone too.
#
# build environment variables, including version info for mcs, motd,
# motd, uname and boot messages. Mostly you shouldn't change this except
# when the release slips (nah) or you move an environment file to a new
# release
#
# the source product has no SCCS history, and is modified to remove source
# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then
# modified with 'make EXPORT_SRC'.
# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in
# the domestic build.
#
# the RELEASE and RELEASE_DATE variables are set in Makefile.master;
# there might be special reasons to override them here, but that
# should not be the case in general
#
# RELEASE="5.10.1"; export RELEASE
# RELEASE_DATE="October 2007"; export RELEASE_DATE
# proto area in parent for optionally depositing a copy of headers and
# libraries corresponding to the protolibs target
# not applicable given the NIGHTLY_OPTIONS
#
#
# package creation variable. you probably shouldn't change this either.
#
# we want make to do as much as it can, just in case there's more than
# one problem.
# mail back to devpro on every use.
# Build tools - don't set these unless you know what you're doing. These
# variables allows you to get the compilers and onbld files locally or
# through cachefs. Set BUILD_TOOLS to pull everything from one location.
# Alternately, you can set ONBLD_TOOLS to where you keep the contents of
# SUNWonbld and SPRO_ROOT to where you keep the compilers.
#
#BUILD_TOOLS=/opt; export BUILD_TOOLS
# This goes along with lint - it is a series of the form "A [y|n]" which
# means "go to directory A and run 'make lint'" Then mail me (y) the
# difference in the lint output. 'y' should only be used if the area you're
# linting is actually lint clean or you'll get lots of mail.
# You shouldn't need to change this though.
#LINTDIRS="$SRC y"; export LINTDIRS
#
# NT server for realmode builds
#
#NTSERVER=<hostname>; export NTSERVER
#
# Reference to IA32 IHV workspace, proto area and packages
#
#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS
#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT
#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS
#
# Reference to binary-only IA32 IHV packages (for boot floppy construction)
#
#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin
#export IA32_IHV_BINARY_PKGS
#
# Boot floppy proto area
#
#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}"
#export DCB_ROOT
#export BOOTFLOPPY_ROOT
#
# Destination for sparc realmode package SUNWrmodu
#
#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly"
#export SPARC_RM_PKGARCHIVE
# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY
# To compare the list of stuff in your DCB and BootFloppy proto areas
# against. Generally this should be left alone, since you want to see
# differences from your parent (the gate).
#
#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH}
#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH}
#export REF_PROTO_LIST_DCB
#export REF_PROTO_LIST_BOOTFLOPPY
# Set this flag to 'n' to disable the automatic validation of the dmake
# version in use. The default is to check it.
#CHECK_DMAKE=y
# Set this flag to 'n' to disable the use of 'checkpaths'. The default,
# if the 'N' option is not specified, is to run this test.
#CHECK_PATHS=y
# Set this flag to 'y' to enable the use of elfsigncmp to validate the
# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS.
# The default is to not verify them.
#VERIFY_ELFSIGN=n
# BRINGOVER_FILES is the list of files nightly passes to bringover.
# If not set the default is "usr", but it can be used for bringing
# over deleted_files or other nifty directories.
#BRINGOVER_FILES="usr deleted_files"
# POST_NIGHTLY can be any command to be run at the end of nightly. See
# nightly(1) for interactions between environment variables and this command.
#POST_NIGHTLY=