Makefile revision c10c16dec587a0662068f6e2991c29ed3a9db943
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
#
#
# Make sure we're getting a consistent execution environment for the
# embedded scripts.
#
#
# To suppress package dependency generation on any system, regardless
# of how it was installed, set SUPPRESSPKGDEP=true in the build
# environment.
#
SUPPRESSPKGDEP= false
#
# Comment this line out or set "PKGDEBUG=" in your build environment
#
PKGDEBUG= @
#
# Cross platform packaging notes
#
# By default, we package the proto area from the same architecture as
# the packaging build. In other words, if you're running nightly or
# bldenv on an x86 platform, it will take objects from the x86 proto
# area and use them to create x86 repositories.
#
# If you want to create repositories for an architecture that's
# different from $(uname -p), you do so by setting PKGMACH in your
# build environment.
#
# For this to work correctly, the following must all happen:
#
# 1. You need the desired proto area, which you can get either by
# doing a gatekeeper-style build with the -U option to
# nightly(1), or by using rsync. If you don't do this, you will
# get packaging failures building all packages, because pkgsend
# is unable to find the required binaries.
# 2. You need the desired tools proto area, which you can get in the
# same ways as the normal proto area. If you don't do this, you
# will get packaging failures building onbld, because pkgsend is
# unable to find the tools binaries.
# 3. The remainder of this Makefile should never refer directly to
# $(MACH). Instead, $(PKGMACH) should be used whenever an
# architecture-specific path or token is needed. If this is done
# incorrectly, then packaging will fail, and you will see the
# value of $(uname -p) instead of the value of $(PKGMACH) in the
# commands that fail.
# 4. Each time a rule in this Makefile invokes $(MAKE), it should
# pass PKGMACH=$(PKGMACH) explicitly on the command line. If
# this is done incorrectly, then packaging will fail, and you
# will see the value of $(uname -p) instead of the value of
# $(PKGMACH) in the commands that fail.
#
# Refer also to the convenience targets defined later in this
# Makefile.
#
#
# ROOT, TOOLS_PROTO, and PKGARCHIVE should be set by nightly or
# bldenv. These macros translate them into terms of $PKGMACH, instead
# of $ARCH.
#
PKGROOT= $(PKGROOT.cmd:sh)
TOOLSROOT= $(TOOLSROOT.cmd:sh)
PKGDEST= $(PKGDEST.cmd:sh)
#
# Always build the redistributable repository, but only build the
# nonredistributable bits if we have access to closed source.
#
# Some objects that result from the closed build are still
# redistributable, and should be packaged as part of an open-only
# build. Access to those objects is provided via the closed-bins
# tarball. See usr/src/tools/scripts/bindrop.sh for details.
#
#
# The packages directory will contain the processed manifests as
# direct build targets and subdirectories for package metadata extracted
# incidentally during manifest processing.
#
# Nothing underneath $(PDIR) should ever be managed by SCM.
#
#
# The tools proto must be specified for dependency generation.
# Publication from the tools proto area is managed in the
# publication rule.
#
#
# To get these defaults, manifests should simply refer to $(PKGVERS).
#
#
# The ARCH32 and ARCH64 macros are used in the manifests to express
# architecture-specific subdirectories in the installation paths
# for isaexec'd commands.
#
# We can't simply use $(MACH32) and $(MACH64) here, because they're
# only defined for the build architecture. To do cross-platform
# packaging, we need both values.
#
#
# macros and transforms needed by pkgmogrify
#
# If you append to this list using target-specific assignments (:=),
# be very careful that the targets are of the form $(PDIR)/pkgname. If
# you use a higher level target, or a package list, you'll trigger a
# complete reprocessing of all manifests because they'll fail command
# dependency checking.
#
i386_ONLY=$(POUND_SIGN) \
sparc_ONLY=$(POUND_SIGN) \
'PLATFORM=i86hvm' \
'PLATFORM=i86pc' \
'PLATFORM=i86xpv' \
'ISALIST=amd64' \
'ISALIST=i386'
'PLATFORM=sun4u' \
'PLATFORM=sun4v' \
'ISALIST=sparcv9' \
'ISALIST=sparc'
#
# The package lists are generated with $(PKGDEP_TYPE) as their
# dependency types, so that they can be included by either an
# incorporation or a group package.
#
#
# All packaging build products should go into $(PDIR), so they don't
# need to be included separately in CLOBBERFILES.
#
#
# subset of packages, override this on the command line or in the
# build environment and then reference (implicitly or explicitly) the all
# or install targets.
#
#
# Track the synthetic manifests separately so we can properly express
# build rules and dependencies. The synthetic and real packages use
# different sets of transforms and macros for pkgmogrify.
#
#
# Root of pkg image to use for dependency resolution
# Normally / on the machine used to build the binaries
#
#
# For each package, we determine the target repository based on
# manifest-embedded metadata. Because we make that determination on
# the fly, the publication target cannot be expressed as a
# subdirectory inside the unknown-by-the-makefile target repository.
#
# In order to limit the target set to real files in known locations,
# we use a ".pub" file in $(PDIR) for each processed manifest, regardless
# of content or target repository.
#
#
# Any given repository- and status-specific package list may be empty,
# but we can only determine that dynamically, so we always generate all
# lists for each repository we're building.
#
# The meanings of each package status are as follows:
#
# PKGSTAT meaning
# ---------- ----------------------------------------------------
# noincorp Do not include in incorporation or group package
# obsolete Include in incorporation, but not group package
# renamed Include in incorporation, but not group package
# current Include in incorporation and group package
#
# Since the semantics of the "noincorp" package status dictate that
# such packages are not included in the incorporation or group packages,
# there is no need to build noincorp package lists.
#
PKGLISTS= \
#
# For a single manifest, the dependency chain looks like this:
#
# raw manifest (mypkg.mf)
# |
# | use pkgmogrify to process raw manifest
# |
# processed manifest (mypkg.mog)
# |
# * | use pkgdepend generate to generate dependencies
# |
# manifest with TBD dependencies (mypkg.dep)
# |
# % | use pkgdepend resolve to resolve dependencies
# |
# manifest with dependencies resolved (mypkg.res)
# |
# | use pkgsend to publish the package
# |
# placeholder to indicate successful publication (mypkg.pub)
#
# * This may be suppressed via SUPPRESSPKGDEP. The resulting
# packages will install correctly, but care must be taken to
# install all dependencies, because pkg will not have the input
# it needs to determine this automatically.
#
# % This is included in this diagram to make the picture complete, but
# this is a point of synchronization in the build process.
# Dependency resolution is actually done once on the entire set of
# manifests, not on a per-package basis.
#
# The full dependency chain for generating everything that needs to be
# published, without actually publishing it, looks like this:
#
# processed synthetic packages
# | |
# package lists synthetic package manifests
# |
# processed real packages
# | |
# package dir real package manifests
#
# Here, each item is a set of real or synthetic packages. For this
# portion of the build, no reference is made to the proto area. It is
# therefore suitable for the "all" target, as opposed to "install."
#
# Since each of these steps is expressed explicitly, "all" need only
# depend on the head of the chain.
#
# From the end of manifest processing, the publication dependency
# chain looks like this:
#
# repository metadata (catalogs and search indices)
# |
# | pkg.depotd
# |
# published packages
# | |
# | | pkgsend publish
# | |
# repositories resolved dependencies
# | |
# pkgsend | | pkgdepend resolve
# create-repository |
# | generated dependencies
# repo directories |
# | pkgdepend
# |
# processed manifests
#
all: $(ALL_TARGETS)
#
# This will build the directory to contain the processed manifests
# and the metadata symlinks.
#
$(PDIR):
@print "Creating $(@)"
#
# This rule resolves dependencies across all published manifests.
#
# We shouldn't have to ignore the error from pkgdepend, but until
# 16012 and its dependencies are resolved, pkgdepend will always exit
# with an error.
#
print "Suppressing dependency resolution"; \
done; \
else \
print "Resolving dependencies"; \
-m $(DEP_SYNTH_PKGS) $(DEP_PKGS); \
then \
print "Removing dependency versions from $$p"; \
$(PKGMOGRIFY) $(PKGMOG_VERBOSE) \
-O $$p.res -I transforms \
strip_versions $$p.dep.res; \
else \
fi; \
done; \
fi
@print "Creating repository metadata"
done
#
# Since we create zero-length processed manifests for a graceful abort
# from pkgmogrify, we need to detect that here and make no effort to
# publish the package.
#
# For all other packages, we publish them regardless of status. We
# derive the target repository as a component of the metadata-derived
# symlink for each package.
#
#
# Before publishing, we want to pull the license files from $CODEMGR_WS
# into the proto area. This allows us to NOT pass $SRC (or
# $CODEMGR_WS) as a basedir for publication.
#
#
# Initialize the empty on-disk repositories
#
@print "Initializing $(@F)"
#
# rule to process real manifests
#
# To allow redistributability and package status to change, we must
# remove not only the actual build target (the processed manifest), but
# also the incidental ones (the metadata-derived symlinks).
#
# If pkgmogrify exits cleanly but fails to create the specified output
# file, it means that it encountered an abort directive. That means
# that this package should not be published for this particular build
# environment. Since we can't prune such packages from $(PKGS)
# retroactively, we need to create an empty target file to keep make
# from trying to rebuild it every time. For these empty targets, we
# do not create metadata symlinks.
#
# Automatic dependency resolution to files is also done at this phase of
# processing. The skipped packages are skipped due to existing bugs
# in pkgdepend.
#
# The incorporation dependency is tricky: it needs to go into all
# current and renamed manifests (ie all incorporated packages), but we
# don't know which those are until after we run pkgmogrify. So
# instead of expressing it as a transform, we tack it on ex post facto.
#
# Implementation notes:
#
# - The first $(RM) must not match other manifests, or we'll run into
# race conditions with parallel manifest processing.
#
# - The make macros [ie $(MACRO)] are evaluated when the makefile is
# read in, and will result in a fixed, macro-expanded rule for each
# target enumerated in $(PROC_PKGS).
#
# - The shell variables (ie $$VAR) are assigned on the fly, as the rule
# is executed. The results may only be referenced in the shell in
# which they are assigned, so from the perspective of make, all code
# that needs these variables needs to be part of the same line of
# code. Hence the use of command separators and line continuation
# characters.
#
# - The extract_metadata transforms are designed to spit out shell
# variable assignments to stdout. Those are published to the
# .vars temporary files, and then used as input to the eval
# statement. This is done in stages specifically so that pkgmogrify
# can signal failure if the manifest has a syntactic or other error.
# The eval statement should begin with the default values, and the
# output from pkgmogrify (if any) should be in the form of a
# variable assignment to override those defaults.
#
# - When this rule completes execution, it must leave an updated
# target file ($@) in place, or make will reprocess the package
# every time it encounters it as a dependency. Hence the "touch"
# statement to ensure that the target is created, even when
# pkgmogrify encounters an abort in the publish transforms.
#
@print "Processing manifest $(<F)"
@pkgfmt -c $<
$(<) $(PM_TRANSFORMS)
if [ -f $(@) ]; then \
if [ "$$NODEPEND" != "false" ]; then \
fi; \
$(LN) -s $(@F) \
if [ \( "$$PKGSTAT" = "current" \) -o \
\( "$$PKGSTAT" = "renamed" \) ]; \
then print $(PKGDEP_INCORP) >> $(@); \
fi; \
else \
fi
@print "Generating dependencies for $(<F)"
$(PKGROOT) > $(@); \
else \
fi
#
# The full chain implies that there should be a .dep.res suffix rule,
# but dependency generation is done on a set of manifests, rather than
# on a per-manifest basis. Instead, see the gendeps rule above.
#
r=$${m#$(@F:%.pub=%.metadata.)+(?).}; \
if [ -s $(<) ]; then \
fi; \
$(TOUCH) $(@);
#
# rule to build the synthetic manifests
#
# This rule necessarily has PKGDEP_TYPE that changes according to
# the specific synthetic manifest. Rather than escape command
# dependency checking for the real manifest processing, or failing to
# express the (indirect) dependency of synthetic manifests on real
# manifests, we simply split this rule out from the one above.
#
# The implementation notes from the previous rule are applicable
# here, too.
#
if [ -f $(@) ]; then \
$(LN) -s $(@F) \
else \
$(TOUCH) $(@); \
fi
$(DEP_SYNTH_PKGS): $$(@:%.dep=%.mog)
$(RM) -r $(CLOBBERFILES)
#
# This rule assumes that all links in the $PKGSTAT directories
# point to valid manifests, and will fail the make run if one
# does not contain an fmri.
#
# We do this in the BEGIN action instead of using pattern matching
# because we expect the fmri to be at or near the first line of each input
# file, and this way lets us avoid reading the rest of the file after we
# find what we need.
#
# We keep track of a failure to locate an fmri, so we can fail the
# make run, but we still attempt to process each package in the
# repo/pkgstat-specific subdir, in hopes of maybe giving some
# additional useful info.
#
# The protolist is used for bfu archive creation, which may be invoked
# interactively by the user. Both protolist and PKGLISTS targets
# depend on $(PROC_PKGS), but protolist builds them recursively.
# To avoid collisions, we insert protolist into the dependency chain
# here. This has two somewhat subtle benefits: it allows bfu archive
# creation to work correctly, even when -a was not part of NIGHTLY_OPTIONS,
# and it ensures that a protolist file here will always correspond to the
# contents of the processed manifests, which can vary depending on build
# environment.
#
print "Generating $$r $$s package list"; \
$(NAWK) 'BEGIN { \
if (ARGC < 2) { \
exit; \
} \
retcode = 0; \
for (i = 1; i < ARGC; i++) { \
do { \
e = getline f < ARGV[i]; \
} while ((e == 1) && (f !~ /name=pkg.fmri/)); \
close(ARGV[i]); \
if (e == 1) { \
l = split(f, a, "="); \
print "depend fmri=" a[l], \
"type=$$(PKGDEP_TYPE)"; \
} else { \
retcode = 2; \
} \
} \
exit retcode; \
-name NOSUCHFILE \)` >> $(@)
#
# rules to validate proto area against manifests, check for safe
# file permission modes, and generate a faux proto list
#
# For the check targets, the dependencies on $(PROC_PKGS) is specified
# as a subordinate make process in order to suppress output.
#
#
# The .lics files were created during pkgmogrification, and list the
# set of licenses to pull from $SRC for each package. Because
# licenses may be duplicated between packages, we uniquify them as
# well as aggregating them here.
#
do print $$l; done ) | sort -u > $@
#
# Staging the license and description files in the proto area allows
# us to do proper unreferenced file checking of both license and
# description files without blanket exceptions, and to pull license
# content without reference to $CODEMGR_WS during publication.
#
print "$(PKGROOT)/licenses/" $$0; \
print "$(PKGROOT)/licenses/" $$0 ".descrip"; \
@validate_pkg -a $(PKGMACH) -v \
#
# This is a convenience target to allow package names to function as
# build targets. Generally, using it is only useful when iterating on
# development of a manifest.
#
# When processing a manifest, use the basename (without extension) of
# the package. When publishing, use the basename with a ".pub"
# extension.
#
# Other than during manifest development, the preferred usage is to
# avoid these targets and override PKGS on the make command line and
# use the provided all and install targets.
#
#
# This is a convenience target to resolve dependencies without publishing
# packages.
#
#
# These are convenience targets for cross-platform packaging. If you
# want to build any of "the normal" targets for a different
#
# Since the most common use case for this is "install," the architecture
# specific install targets have been further abbreviated to elide "/install."
#
FRC:
# EXPORT DELETE START
XMOD_PKGS= \
BRCMbnx \
BRCMbnxe \
SUNWkdc \
$(SED) -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
# EXPORT DELETE END