meta_mn_subr.c revision d7cd82522afdd890a66c7600b499590ad44e84bd
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "%Z%%M% %I% %E% SMI"
/*
* Just in case we're not in a build environment, make sure that
* TEXT_DOMAIN gets set to something.
*/
#if !defined(TEXT_DOMAIN)
#define TEXT_DOMAIN "SYS_TEST"
#endif
#include <meta.h>
#include <sdssc.h>
#include <arpa/inet.h>
#include <sys/lvm/md_mddb.h>
#define MAX_LINE_SIZE 1024
/*
* Maximum amount of time to spend waiting for an ownership change to complete.
*/
static const int OWNER_TIMEOUT = 3;
/*
* FUNCTION: meta_is_mn_set()
* INPUT: sp - the set name
* OUTPUT: ep - return error pointer
* RETURNS: int - 1 if MultiNode set else 0
* PURPOSE: checks if the set is a MultiNode set
*/
int
meta_is_mn_set(
mdsetname_t *sp,
md_error_t *ep
)
{
md_set_desc *sd;
/* Local set cannot be MultiNode */
if ((sp == NULL) || (sp->setname == NULL) ||
(strcmp(sp->setname, MD_LOCAL_NAME) == 0))
return (0);
sd = metaget_setdesc(sp, ep);
ASSERT(sd != NULL);
if (sd->sd_flags & MD_SR_MN)
return (1);
return (0);
}
/*
* FUNCTION: meta_is_mn_name()
* INPUT: spp - ptr to the set name, if NULL the setname is derived
* from the metadevice name (eg set/d10 )
* name - the metadevice/hsp name
* OUTPUT: ep - return error pointer
* RETURNS: int - 1 if MultiNode set else 0
* PURPOSE: checks if the metadevice is in a MultiNode set
*/
int
meta_is_mn_name(
mdsetname_t **spp,
char *name,
md_error_t *ep
)
{
if (*spp == NULL) {
char *cname;
/*
* if the setname is specified in uname and *spp is
* not set, then it is setup using that set name value.
* If *spp is set and a setname specified in uname and
* the set names don't agree then cname will be
* returned as NULL
*/
cname = meta_canonicalize_check_set(spp, name, ep);
if (cname == NULL) {
mdclrerror(ep);
return (0);
}
Free(cname);
}
if ((strcmp((*spp)->setname, MD_LOCAL_NAME) != 0) &&
(metaget_setdesc(*spp, ep) != NULL) &&
((*spp)->setdesc->sd_flags & MD_SR_MN)) {
return (1);
}
return (0);
}
/*
* meta_ping_mnset(set_t setno)
* Send a test message for this set in order to make commd do some init stuff
* Don't bother changelog.
* If set is suspended, fail immediately.
*/
void
meta_ping_mnset(set_t setno)
{
char *data = "test";
md_error_t mde = mdnullerror;
md_mn_result_t *resp = NULL;
(void) mdmn_send_message(setno, MD_MN_MSG_TEST2,
MD_MSGF_NO_LOG | MD_MSGF_FAIL_ON_SUSPEND, data,
sizeof (data), &resp, &mde);
if (resp != (md_mn_result_t *)NULL) {
free_result(resp);
}
}
/*
*
* FUNCTION: print_stderr
* INPUT: errstr - the error message returned by the command
* context - the context string from metainit -a
* PURPOSE: called from meta_mn_send_command to print the error message
* to stderr. When context is NO_CONTEXT_STRING, the errstr string
* is output unchanged. When context is a string, it is the context
* string for the metainit -a command and in this case the errstr
* string has to be parsed to extract the command and node name
* and to send a message to stderr in the format
* command: node: context: error message
*/
static void
print_stderr(
char *errstr,
char *context
)
{
char *command;
char *node;
char *message;
int length = strlen(errstr + 1);
if (context == NO_CONTEXT_STRING) {
(void) fprintf(stderr, "%s", errstr);
} else {
command = Malloc(length);
node = Malloc(length);
message = Malloc(length);
if (sscanf(errstr, "%[^:]: %[^:]: %[^\n]", command, node,
message) == 3) {
(void) fprintf(stderr, "%s: %s: %s: %s\n", command,
node, context, message);
} else {
(void) fprintf(stderr, dgettext(TEXT_DOMAIN,
"%s: Invalid format error message"), errstr);
}
Free(command);
Free(node);
Free(message);
}
}
/*
* FUNCTION: meta_mn_send_command()
* INPUT: sp - the set name
* argc - number of arguments
* argv - arg list
* flags - some controlling flags
* initall_context - context string for metainit -a
* OUTPUT: ep - return error pointer
* RETURNS: return exitval from mdmn_send_message
* PURPOSE: sends the command to the master node for execution
*/
int
meta_mn_send_command(
mdsetname_t *sp,
int argc,
char *argv[],
int flags,
char *initall_context,
md_error_t *ep
)
{
int a;
int err;
int retval;
int send_message_flags = MD_MSGF_DEFAULT_FLAGS;
int send_message_type;
char *cmd;
md_mn_result_t *resp = NULL;
cmd = Malloc(1024);
(void) strlcpy(cmd, argv[0], 1024);
for (a = 1; a < argc; a++) {
/* don't copy empty arguments */
if (*argv[a] == '\0') {
continue;
}
(void) strcat(cmd, " ");
(void) strcat(cmd, argv[a]);
}
/*
* in dryrun mode stop on the first error
* use the CMD_RETRY message type if RETRY_BUSY flag set
*/
if (flags & MD_DRYRUN)
send_message_flags |= MD_MSGF_STOP_ON_ERROR;
if (flags & MD_NOLOG)
send_message_flags |= MD_MSGF_NO_LOG;
if (flags & MD_PANIC_WHEN_INCONSISTENT)
send_message_flags |= MD_MSGF_PANIC_WHEN_INCONSISTENT;
if (flags & MD_RETRY_BUSY) {
send_message_type = MD_MN_MSG_BC_CMD_RETRY;
} else {
send_message_type = MD_MN_MSG_BC_CMD;
}
err = mdmn_send_message(
sp->setno, send_message_type, send_message_flags,
cmd, 1024, &resp, ep);
free(cmd);
if (err == 0) {
/*
* stderr may be turned off by IGNORE_STDERR
* In dryrun we only print stderr if the exit_val is non-zero
*/
if ((resp->mmr_err_size != 0) &&
((flags & MD_IGNORE_STDERR) == 0)) {
if (((flags & MD_DRYRUN) == 0) ||
(resp->mmr_exitval != 0)) {
print_stderr(resp->mmr_err, initall_context);
}
}
/*
* If dryrun is set, we don't display stdout,
* because the real run has yet to follow.
*/
if (((flags & MD_DRYRUN) == 0) && (resp->mmr_out_size != 0)) {
(void) printf("%s", resp->mmr_out);
}
retval = resp->mmr_exitval;
free_result(resp);
return (retval);
}
if (resp != NULL) {
if (resp->mmr_comm_state == MDMNE_CLASS_BUSY) {
(void) fprintf(stderr, dgettext(TEXT_DOMAIN,
"rpc.mdcommd currently busy. "
"Retry operation later.\n"));
} else if (resp->mmr_comm_state == MDMNE_NOT_JOINED) {
(void) fprintf(stderr, dgettext(TEXT_DOMAIN,
"Node %s must join the %s multi-owner diskset to "
"issue commands.\n"
"To join, use: metaset -s %s -j\n"),
mynode(), sp->setname, sp->setname);
} else if (resp->mmr_comm_state == MDMNE_LOG_FAIL) {
mddb_config_t c;
(void) memset(&c, 0, sizeof (c));
c.c_setno = sp->setno;
(void) metaioctl(MD_DB_GETDEV, &c, &c.c_mde, NULL);
(void) fprintf(stderr, dgettext(TEXT_DOMAIN,
"Command not attempted: Unable to log message "
"in set %s\n"), sp->setname);
if (c.c_flags & MDDB_C_STALE) {
(void) mdmddberror(ep, MDE_DB_STALE,
(minor_t)NODEV64, sp->setno, 0, NULL);
mde_perror(ep, "");
}
} else {
(void) fprintf(stderr, dgettext(TEXT_DOMAIN,
"Command failed: Commd State %d "
"encountered.\n"), resp->mmr_comm_state);
}
free_result(resp);
} else {
(void) fprintf(stderr, dgettext(TEXT_DOMAIN,
"Command failed: mdmn_send_message returned %d.\n"),
err);
}
return (1);
}
/*
* FUNCTION: meta_mn_send_suspend_writes()
* INPUT: mnum - minor num of mirror
* OUTPUT: ep - return error pointer
* RETURNS: return value from mdmn_send_message()
* PURPOSE: sends message to all nodes to suspend writes to the mirror.
*/
int
meta_mn_send_suspend_writes(
minor_t mnum,
md_error_t *ep
)
{
int result;
md_mn_msg_suspwr_t suspwrmsg;
md_mn_result_t *resp = NULL;
suspwrmsg.msg_suspwr_mnum = mnum;
/*
* This message is never directly issued.
* So we launch it with a suspend override flag.
* If the commd is suspended, and this message comes
* along it must be sent due to replaying a command or similar.
* In that case we don't want this message to be blocked.
* If the commd is not suspended, the flag does no harm.
*/
result = mdmn_send_message(MD_MIN2SET(mnum),
MD_MN_MSG_SUSPEND_WRITES,
MD_MSGF_NO_LOG | MD_MSGF_OVERRIDE_SUSPEND,
(char *)&suspwrmsg, sizeof (suspwrmsg), &resp, ep);
if (resp != NULL) {
free_result(resp);
}
return (result);
}
/*
* Parse the multi-node list file
*
* Return Values: Zero - Success
* Non Zero - Failure
*
* File content: The content of the nodelist file should consist of
* triplets of nodeid, nodename and private interconnect
* address seperated by one or more white space.
* e.g.
* 1 node_a 192.168.111.3
* 2 node_b 192.168.111.5
*
* Any missing fields will result in an error.
*/
int
meta_read_nodelist(
int *nodecnt,
mndiskset_membershiplist_t **nl,
md_error_t *ep
)
{
FILE *fp = NULL;
char line[MAX_LINE_SIZE];
char *buf;
uint_t i;
int sz;
mndiskset_membershiplist_t **tailp = nl;
/* open file */
if ((fp = fopen(META_MNSET_NODELIST, "r")) == NULL) {
mndiskset_membershiplist_t *nlp;
struct hostent *hp;
/* return this node with id of 1 */
nlp = *tailp = Zalloc(sizeof (*nlp));
tailp = &nlp->next;
*nodecnt = 1;
nlp->msl_node_id = 1;
buf = mynode();
sz = min(strlen(buf), sizeof (nlp->msl_node_name) - 1);
(void) strncpy(nlp->msl_node_name, buf, sz);
nlp->msl_node_name[sz] = '\0';
/* retrieve info about our host */
if ((hp = gethostbyname(buf)) == NULL) {
return (mdsyserror(ep, EADDRNOTAVAIL, buf));
}
/* We only do IPv4 addresses, for now */
if (hp->h_addrtype != AF_INET) {
return (mdsyserror(ep, EPFNOSUPPORT, buf));
}
/* We take the first address only */
if (*hp->h_addr_list) {
struct in_addr in;
(void) memcpy(&in.s_addr, *hp->h_addr_list,
sizeof (struct in_addr));
(void) strncpy(nlp->msl_node_addr, inet_ntoa(in),
MD_MAX_NODENAME);
} else {
return (mdsyserror(ep, EADDRNOTAVAIL, buf));
}
return (0);
}
*nl = NULL;
*nodecnt = 0;
while ((fp != NULL) && ((buf = fgets(line, sizeof (line) - 1, fp)) !=
NULL)) {
mndiskset_membershiplist_t *nlp;
/* skip leading spaces */
while ((*buf != '\0') && (i = strcspn(buf, " \t\n")) == 0)
buf++;
/* skip comments and blank lines */
if (*buf == '\0' || *buf == '#')
continue;
/* allocate memory and set tail pointer */
nlp = *tailp = Zalloc(sizeof (*nlp));
tailp = &nlp->next;
/* parse node id */
nlp->msl_node_id = strtoul(buf, NULL, 0);
buf += i;
/* skip leading spaces */
while ((*buf != '\0') && (i = strcspn(buf, " \t\n")) == 0)
buf++;
/* fields missing, return error */
if (*buf == '\0' || *buf == '#') {
meta_free_nodelist(*nl);
*nl = NULL;
*nodecnt = 0;
/* close file and return */
if ((fp) && (fclose(fp) != 0))
return (mdsyserror(ep, errno,
META_MNSET_NODELIST));
return (mdsyserror(ep, EINVAL, META_MNSET_NODELIST));
}
/* parse node name */
sz = min(i, sizeof (nlp->msl_node_name) - 1);
(void) strncpy(nlp->msl_node_name, buf, sz);
nlp->msl_node_name[sz] = '\0';
buf += i;
/* skip leading spaces */
while ((*buf != '\0') && (i = strcspn(buf, " \t\n")) == 0)
buf++;
/* fields missing, return error */
if (*buf == '\0' || *buf == '#') {
meta_free_nodelist(*nl);
*nl = NULL;
*nodecnt = 0;
/* close file and return */
if ((fp) && (fclose(fp) != 0))
return (mdsyserror(ep, errno,
META_MNSET_NODELIST));
return (mdsyserror(ep, EINVAL, META_MNSET_NODELIST));
}
/* parse node address */
sz = min(i, sizeof (nlp->msl_node_addr) - 1);
(void) strncpy(nlp->msl_node_addr, buf, sz);
nlp->msl_node_addr[sz] = '\0';
++*nodecnt;
}
/* close file */
if ((fp) && (fclose(fp) != 0))
return (mdsyserror(ep, errno, META_MNSET_NODELIST));
return (0);
}
/*
* Populate the multi-node list file from a given list of node id's
* The nids must have only one node id in each cell. Range of node
* id's in the form 1-n are not allowed.
*
* Return Values: Zero - Success
* Non Zero - Failure
*/
int
meta_write_nodelist(
int nodecnt,
char **nids,
md_error_t *ep
)
{
FILE *fp = NULL;
char name[MAX_LINE_SIZE], addr[MAX_LINE_SIZE];
uint_t i, nid;
struct in_addr ipaddr;
int err = 0;
/* check if we are running on clustering */
if ((err = sdssc_bind_library()) != SDSSC_OKAY) {
return (mdsyserror(ep, err, META_MNSET_NODELIST));
}
/* open file for writing */
if ((fp = fopen(META_MNSET_NODELIST, "w")) == NULL) {
return (mdsyserror(ep, errno, META_MNSET_NODELIST));
}
for (i = 0; i < nodecnt; i++) {
/* extract the node id */
errno = 0;
nid = strtoul(nids[i], NULL, 0);
if (errno != 0) {
if ((fp) && (fclose(fp) != 0))
return (mdsyserror(ep, errno,
META_MNSET_NODELIST));
return (mdsyserror(ep, EINVAL, META_MNSET_NODELIST));
}
/* get node name */
(void) snprintf(name, sizeof (name), "%d", nid);
sdssc_cm_nid2nm(name);
/* finally get the private ip address */
(void) snprintf(addr, sizeof (addr), "%s", name);
if (sdssc_get_priv_ipaddr(addr, &ipaddr) != SDSSC_OKAY) {
if ((fp) && (fclose(fp) != 0))
return (mdsyserror(ep, errno,
META_MNSET_NODELIST));
return (mdsyserror(ep, EINVAL, META_MNSET_NODELIST));
}
(void) fprintf(fp, "%d\t%s\t%s\n", nid, name,
inet_ntoa(ipaddr));
}
/* close file */
if ((fp) && (fclose(fp) != 0))
return (mdsyserror(ep, errno, META_MNSET_NODELIST));
return (0);
}
/*
* Free node list
*/
void
meta_free_nodelist(
mndiskset_membershiplist_t *nl
)
{
mndiskset_membershiplist_t *next = NULL;
for (/* void */; (nl != NULL); nl = next) {
next = nl->next;
Free(nl);
}
}
/*
* FUNCTION: meta_mn_send_setsync()
* INPUT: sp - setname
* mirnp - mirror name
* size - buffer size, 0 if none
* OUTPUT: ep - return error pointer
* RETURNS: return value from meta_mn_send_command()
* PURPOSE: Send a setsync command to all nodes to set resync status
*/
int
meta_mn_send_setsync(
mdsetname_t *sp,
mdname_t *mirnp,
daddr_t size,
md_error_t *ep
)
{
md_mn_msg_setsync_t setsyncmsg;
int ret;
md_mn_result_t *resp = NULL;
setsyncmsg.setsync_mnum = meta_getminor(mirnp->dev);
setsyncmsg.setsync_copysize = size;
setsyncmsg.setsync_flags = 0;
/*
* We do not log the metasync command as it will have no effect on the
* underlying metadb state. If we have a master change the
* reconfiguration process will issue a new 'metasync' to all affected
* mirrors, so we would actually end up sending the message twice.
* Removing the logging of the message helps reduce the processing
* time required.
*/
ret = mdmn_send_message(sp->setno, MD_MN_MSG_SETSYNC,
MD_MSGF_NO_LOG | MD_MSGF_OVERRIDE_SUSPEND,
(char *)&setsyncmsg, sizeof (setsyncmsg), &resp, ep);
if (resp != NULL) {
free_result(resp);
}
/*
* Unlike non-MN sets, the metasync command does not actually
* start a resync, it simply updates the state on all of the
* nodes. Therefore, to start a resync we send a resync starting
* message for the metadevice
*/
if (ret == 0)
ret = meta_mn_send_resync_starting(mirnp, ep);
return (ret);
}
/*
* FUNCTION: meta_mn_send_metaclear_command()
* INPUT: sp - setname
* name - metadevice name
* options - command options
* pflag - clear all soft partitions for a given device
* OUTPUT: ep - return error pointer
* RETURNS: return value from meta_mn_send_command()
* PURPOSE: Send a metaclear command to all nodes with force(-f) and
* recurse(-r) options set if required. For hotspare pool and
* metadevices, the metadevice name is of the form setname/dxx or
* setname/hspxxx so a '-s' argument isn't required. If pflag is set
* the name refers to a metadevice or component and in the is case
* a '-s' argument is required to define the set.
*/
int
meta_mn_send_metaclear_command(
mdsetname_t *sp,
char *name,
mdcmdopts_t options,
int pflag,
md_error_t *ep
)
{
int newargc;
char **newargv;
int ret;
/*
* Allocate an array large enough to hold all of the possible
* metaclear arguments
*/
newargv = Calloc(7, sizeof (char *));
newargv[0] = "metaclear";
newargc = 1;
if (pflag) {
newargv[newargc] = "-s";
newargc++;
newargv[newargc] = sp->setname;
newargc++;
}
if (options & MDCMD_FORCE) {
newargv[newargc] = "-f";
newargc++;
}
if (options & MDCMD_RECURSE) {
newargv[newargc] = "-r";
newargc++;
}
if (pflag) {
newargv[newargc] = "-p";
newargc++;
}
newargv[newargc] = name;
newargc++;
ret = meta_mn_send_command(sp, newargc, newargv,
MD_DISP_STDERR, NO_CONTEXT_STRING, ep);
free(newargv);
return (ret);
}
/*
* FUNCTION: meta_mn_send_resync_starting()
* INPUT: sp - setname
* mirnp - mirror name
* OUTPUT: ep - return error pointer
* RETURNS: return value from mdmn_send_message()
* PURPOSE: Send a resync starting message to all nodes.
*/
int
meta_mn_send_resync_starting(
mdname_t *mirnp,
md_error_t *ep
)
{
int result;
md_mn_msg_resync_t resyncmsg;
md_mn_result_t *resp = NULL;
minor_t mnum = meta_getminor(mirnp->dev);
/*
* This message is never directly issued.
* So we launch it with a suspend override flag.
* If the commd is suspended, and this message comes
* along it must be sent due to replaying a command or similar.
* In that case we don't want this message to be blocked.
* If the commd is not suspended, the flag does no harm.
*/
resyncmsg.msg_resync_mnum = mnum;
result = mdmn_send_message(MD_MIN2SET(mnum),
MD_MN_MSG_RESYNC_STARTING,
MD_MSGF_NO_LOG | MD_MSGF_OVERRIDE_SUSPEND,
(char *)&resyncmsg, sizeof (resyncmsg), &resp, ep);
if (resp != NULL) {
free_result(resp);
}
return (result);
}
/*
* FUNCTION: meta_mn_change_owner()
* INPUT: opp - pointer to parameter block
* setno - set number of mirror metadevice
* mnum - minor number of mirror metadevice
* owner - node ID of mirror owner
* flags - flag field for ioctl
* OUTPUT: opp - parameter block used to send ioctl
* RETURNS: int - 0 success, -1 error
* PURPOSE: issue an ioctl to change the ownership of the specified mirror
* to our node ID. We need to be the owner before any watermarks
* are committed to the device otherwise we'll enter a deadly
* embrace when attempting to write the watermark.
* This function can also be used so set the owner on a node to
* NULL. In this case the change is only made on the local node.
* In addition by setting the MD_MN_MM_CHOOSE_OWNER flag, the
* function can also be used to choose a mirror resync owner. This
* function should only be called on the master and it will
* select the owner and request it to become the owner.
*/
int
meta_mn_change_owner(
md_set_mmown_params_t **opp, /* Returned parameter block */
set_t setno, /* Mirror set number */
uint_t mnum, /* Minor number */
uint_t owner, /* Node ID of mirror owner */
uint_t flags /* Flags */
)
{
md_set_mmown_params_t *ownpar = *opp;
md_mn_own_status_t *ownstat = NULL;
struct timeval tvs, tve;
int n = 0;
int rval;
if (ownpar != NULL) {
(void) memset(ownpar, 0, sizeof (*ownpar));
} else {
ownpar = Zalloc(sizeof (*ownpar));
}
ownstat = Zalloc(sizeof (*ownstat));
ownpar->d.mnum = mnum;
ownpar->d.owner = owner;
ownpar->d.flags = flags;
MD_SETDRIVERNAME(ownpar, MD_MIRROR, setno);
MD_SETDRIVERNAME(ownstat, MD_MIRROR, setno);
/*
* Attempt to change the ownership to the specified node. We retry this
* up to 10 times if we receive EAGAIN from the metadevice. This only
* happens if the underlying metadevice is busy with outstanding i/o
* that requires ownership change.
*/
while ((rval = metaioctl(MD_MN_SET_MM_OWNER, ownpar, &ownpar->mde,
NULL)) != 0) {
md_sys_error_t *ip =
&ownpar->mde.info.md_error_info_t_u.sys_error;
if (ip->errnum != EAGAIN)
break;
if (n++ >= 10)
break;
(void) sleep(1);
}
/*
* There is no need to wait for the ioctl completion if we are setting
* the owner to NULL or requesting the master to choose the owner
*/
if ((owner == 0) || (flags & MD_MN_MM_CHOOSE_OWNER)) {
Free(ownstat);
*opp = ownpar;
return (0);
}
/*
* Wait for ioctl completion or a timeout to occur. If we
* timeout we fail the i/o request.
*/
ownstat->mnum = ownpar->d.mnum;
(void) gettimeofday(&tvs, NULL);
while ((rval == 0) && !(ownstat->flags & MD_MN_MM_RESULT)) {
while ((rval = metaioctl(MD_MN_MM_OWNER_STATUS, ownstat,
&ownstat->mde, NULL)) != 0) {
(void) gettimeofday(&tve, NULL);
if ((tve.tv_sec - tvs.tv_sec) > OWNER_TIMEOUT) {
rval = -1;
break;
}
(void) sleep(1);
}
}
/* we did not not timeout but ioctl failed set rval */
if (rval == 0) {
rval = (ownstat->flags & MD_MN_MM_RES_FAIL) ? -1 : 0;
}
Free(ownstat);
*opp = ownpar;
return (rval);
}
/*
* special handling is required when running on a single node
* non-SC3.x environment. This function determines tests
* for that case.
*
* Return values:
* 0 - no nodes or joined or in a SC3.x env
* 1 - 1 node and not in SC3.x env
*/
int
meta_mn_singlenode()
{
md_error_t xep = mdnullerror;
int nodecnt;
int mnset_single_node = 0;
mndiskset_membershiplist_t *nl;
/*
* If running on SunCluster, then don't validate MN sets,
* this is done during a reconfig cycle since all nodes must
* take the same action.
*
* Only cleanup in case of a single node situation
* when not running on SunCluster. This single node
* situation occurs when the nodelist only contains
* this node and the MN setrecords only contain this
* node.
*/
if (meta_read_nodelist(&nodecnt, &nl, &xep) == -1) {
nodecnt = 0; /* no nodes are alive */
nl = NULL;
mdclrerror(&xep);
} else {
/*
* If only 1 node in nodelist and not running
* on SunCluster, set single_node flag.
*/
if ((nodecnt == 1) &&
(strcmp(nl->msl_node_name, mynode()) == 0) &&
((sdssc_bind_library()) != SDSSC_OKAY)) {
mnset_single_node = 1;
}
meta_free_nodelist(nl);
}
return (mnset_single_node);
}
/*
* FUNCTION: meta_mn_send_get_tstate()
* INPUT: dev - dev_t of device
* OUTPUT: tstatep - tstate value
* ep - return error pointer
* RETURNS: return value from mdmn_send_message()
* PURPOSE: Send a message to the master to get ui_tstate for a given device.
*/
int
meta_mn_send_get_tstate(
md_dev64_t dev,
uint_t *tstatep,
md_error_t *ep
)
{
int result;
md_mn_msg_gettstate_t tstatemsg;
md_mn_result_t *resp = NULL;
minor_t mnum = meta_getminor(dev);
tstatemsg.gettstate_dev = dev;
result = mdmn_send_message(MD_MIN2SET(mnum),
MD_MN_MSG_GET_TSTATE,
MD_MSGF_NO_LOG | MD_MSGF_NO_BCAST,
(char *)&tstatemsg, sizeof (tstatemsg), &resp, ep);
if (result == 0)
*tstatep = resp->mmr_exitval;
else
/* If some error occurred set tstate to 0 */
*tstatep = 0;
if (resp != NULL) {
free_result(resp);
}
return (result);
}