libzfs/common/libzfs_status.c

	libzfs_status.c revision b87f3af36bb994656da117319f5129ddfd05ed21
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident   "%Z%%M% %I% %E% SMI"

/*
 * This file contains the functions which analyze the status of a pool.  This
 * include both the status of an active pool, as well as the status exported
 * pools.  Returns one of the ZPOOL_STATUS_* defines describing the status of
 * the pool.  This status is independent (to a certain degree) from the state of
 * the pool.  A pool's state describes only whether or not it is capable of
 * providing the necessary fault tolerance for data.  The status describes the
 * overall status of devices.  A pool that is online can still have a device
 * that is experiencing errors.
 *
 * Only a subset of the possible faults can be detected using 'zpool status',
 * and not all possible errors correspond to a FMA message ID.  The explanation
 * is left up to the caller, depending on whether it is a live pool or an
 * import.
 */

#include <libzfs.h>
#include <string.h>
#include <unistd.h>
#include "libzfs_impl.h"

/*
 * Message ID table.  This must be kept in sync with the ZPOOL_STATUS_* defines
 * in libzfs.h.  Note that there are some status results which go past the end
 * of this table, and hence have no associated message ID.
 */
static char *zfs_msgid_table[] = {
    "ZFS-8000-14",
    "ZFS-8000-2Q",
    "ZFS-8000-3C",
    "ZFS-8000-4J",
    "ZFS-8000-5E",
    "ZFS-8000-6X",
    "ZFS-8000-72",
    "ZFS-8000-8A",
    "ZFS-8000-9P",
    "ZFS-8000-A5",
    "ZFS-8000-EY",
    "ZFS-8000-HC",
    "ZFS-8000-JQ",
    "ZFS-8000-K4",
};

#define NMSGID  (sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))

/* ARGSUSED */
static int
vdev_missing(uint64_t state, uint64_t aux, uint64_t errs)
{
    return (state == VDEV_STATE_CANT_OPEN &&
        aux == VDEV_AUX_OPEN_FAILED);
}

/* ARGSUSED */
static int
vdev_faulted(uint64_t state, uint64_t aux, uint64_t errs)
{
    return (state == VDEV_STATE_FAULTED);
}

/* ARGSUSED */
static int
vdev_errors(uint64_t state, uint64_t aux, uint64_t errs)
{
    return (state == VDEV_STATE_DEGRADED || errs != 0);
}

/* ARGSUSED */
static int
vdev_broken(uint64_t state, uint64_t aux, uint64_t errs)
{
    return (state == VDEV_STATE_CANT_OPEN);
}

/* ARGSUSED */
static int
vdev_offlined(uint64_t state, uint64_t aux, uint64_t errs)
{
    return (state == VDEV_STATE_OFFLINE);
}

/*
 * Detect if any leaf devices that have seen errors or could not be opened.
 */
static boolean_t
find_vdev_problem(nvlist_t *vdev, int (*func)(uint64_t, uint64_t, uint64_t))
{
    nvlist_t **child;
    vdev_stat_t *vs;
    uint_t c, children;
    char *type;

    /*
     * Ignore problems within a 'replacing' vdev, since we're presumably in
     * the process of repairing any such errors, and don't want to call them
     * out again.  We'll pick up the fact that a resilver is happening
     * later.
     */
    verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0);
    if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
        return (B_FALSE);

    if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
        &children) == 0) {
        for (c = 0; c < children; c++)
            if (find_vdev_problem(child[c], func))
                return (B_TRUE);
    } else {
        verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_STATS,
            (uint64_t **)&vs, &c) == 0);

        if (func(vs->vs_state, vs->vs_aux,
            vs->vs_read_errors +
            vs->vs_write_errors +
            vs->vs_checksum_errors))
            return (B_TRUE);
    }

    return (B_FALSE);
}

/*
 * Active pool health status.
 *
 * To determine the status for a pool, we make several passes over the config,
 * picking the most egregious error we find.  In order of importance, we do the
 * following:
 *
 *  - Check for a complete and valid configuration
 *  - Look for any faulted or missing devices in a non-replicated config
 *  - Check for any data errors
 *  - Check for any faulted or missing devices in a replicated config
 *  - Look for any devices showing errors
 *  - Check for any resilvering devices
 *
 * There can obviously be multiple errors within a single pool, so this routine
 * only picks the most damaging of all the current errors to report.
 */
static zpool_status_t
check_status(zpool_handle_t *zhp, nvlist_t *config, boolean_t isimport)
{
    nvlist_t *nvroot;
    vdev_stat_t *vs;
    uint_t vsc;
    uint64_t nerr;
    uint64_t version;
    uint64_t stateval;
    uint64_t hostid = 0;

    verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
        &version) == 0);
    verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
        &nvroot) == 0);
    verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_STATS,
        (uint64_t **)&vs, &vsc) == 0);
    verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE,
        &stateval) == 0);
    (void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);

    /*
     * Pool last accessed by another system.
     */
    if (hostid != 0 && (unsigned long)hostid != gethostid() &&
        stateval == POOL_STATE_ACTIVE)
        return (ZPOOL_STATUS_HOSTID_MISMATCH);

    /*
     * Newer on-disk version.
     */
    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        vs->vs_aux == VDEV_AUX_VERSION_NEWER)
        return (ZPOOL_STATUS_VERSION_NEWER);

    /*
     * Check that the config is complete.
     */
    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
        return (ZPOOL_STATUS_BAD_GUID_SUM);

    /*
     * Pool has experienced failed I/O.
     */
    if (stateval == POOL_STATE_IO_FAILURE) {
        zpool_handle_t *tmp_zhp = NULL;
        libzfs_handle_t *hdl = NULL;
        char property[ZPOOL_MAXPROPLEN];
        char *failmode = NULL;

        if (zhp == NULL) {
            char *poolname;

            verify(nvlist_lookup_string(config,
                ZPOOL_CONFIG_POOL_NAME, &poolname) == 0);
            if ((hdl = libzfs_init()) == NULL)
                return (ZPOOL_STATUS_IO_FAILURE_WAIT);
            tmp_zhp = zpool_open_canfail(hdl, poolname);
            if (tmp_zhp == NULL) {
                libzfs_fini(hdl);
                return (ZPOOL_STATUS_IO_FAILURE_WAIT);
            }
        }
        if (zpool_get_prop(zhp ? zhp : tmp_zhp, ZPOOL_PROP_FAILUREMODE,
            property, sizeof (property), NULL) == 0)
            failmode = property;
        if (tmp_zhp != NULL)
            zpool_close(tmp_zhp);
        if (hdl != NULL)
            libzfs_fini(hdl);
        if (failmode == NULL)
            return (ZPOOL_STATUS_IO_FAILURE_WAIT);

        if (strncmp(failmode, "continue", strlen("continue")) == 0)
            return (ZPOOL_STATUS_IO_FAILURE_CONTINUE);
        else
            return (ZPOOL_STATUS_IO_FAILURE_WAIT);
    }

    /*
     * Could not read a log.
     */
    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        vs->vs_aux == VDEV_AUX_BAD_LOG) {
        return (ZPOOL_STATUS_BAD_LOG);
    }

    /*
     * Bad devices in non-replicated config.
     */
    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        find_vdev_problem(nvroot, vdev_faulted))
        return (ZPOOL_STATUS_FAULTED_DEV_NR);

    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        find_vdev_problem(nvroot, vdev_missing))
        return (ZPOOL_STATUS_MISSING_DEV_NR);

    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        find_vdev_problem(nvroot, vdev_broken))
        return (ZPOOL_STATUS_CORRUPT_LABEL_NR);

    /*
     * Corrupted pool metadata
     */
    if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
        vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
        return (ZPOOL_STATUS_CORRUPT_POOL);

    /*
     * Persistent data errors.
     */
    if (!isimport) {
        if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
            &nerr) == 0 && nerr != 0)
            return (ZPOOL_STATUS_CORRUPT_DATA);
    }

    /*
     * Missing devices in a replicated config.
     */
    if (find_vdev_problem(nvroot, vdev_faulted))
        return (ZPOOL_STATUS_FAULTED_DEV_R);
    if (find_vdev_problem(nvroot, vdev_missing))
        return (ZPOOL_STATUS_MISSING_DEV_R);
    if (find_vdev_problem(nvroot, vdev_broken))
        return (ZPOOL_STATUS_CORRUPT_LABEL_R);

    /*
     * Devices with errors
     */
    if (!isimport && find_vdev_problem(nvroot, vdev_errors))
        return (ZPOOL_STATUS_FAILING_DEV);

    /*
     * Offlined devices
     */
    if (find_vdev_problem(nvroot, vdev_offlined))
        return (ZPOOL_STATUS_OFFLINE_DEV);

    /*
     * Currently resilvering
     */
    if (!vs->vs_scrub_complete && vs->vs_scrub_type == POOL_SCRUB_RESILVER)
        return (ZPOOL_STATUS_RESILVERING);

    /*
     * Outdated, but usable, version
     */
    if (version < SPA_VERSION)
        return (ZPOOL_STATUS_VERSION_OLDER);

    return (ZPOOL_STATUS_OK);
}

zpool_status_t
zpool_get_status(zpool_handle_t *zhp, char **msgid)
{
    zpool_status_t ret = check_status(zhp, zhp->zpool_config, B_FALSE);

    if (ret >= NMSGID)
        *msgid = NULL;
    else
        *msgid = zfs_msgid_table[ret];

    return (ret);
}

zpool_status_t
zpool_import_status(nvlist_t *config, char **msgid)
{
    zpool_status_t ret = check_status(NULL, config, B_TRUE);

    if (ret >= NMSGID)
        *msgid = NULL;
    else
        *msgid = zfs_msgid_table[ret];

    return (ret);
}