ldapconfig.h revision 5e45752a44935a6b2445ae1c763867d868fa3fbb
/*
*
* Portions Copyright 1998 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*
* File chamged to fit with Sun Standards
*
*/
#pragma ident "%Z%%M% %I% %E% SMI"
/*
* Copyright (c) 1994 Regents of the University of Michigan.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that this notice is preserved and that due credit is given
* to the University of Michigan at Ann Arbor. The name of the University
* may not be used to endorse or promote products derived from this
* software without specific prior written permission. This software
* is provided ``as is'' without express or implied warranty.
*/
#ifndef _CONFIG_H
#define _CONFIG_H
/*
* config.h for LDAP -- edit this file to customize LDAP client behavior.
* NO platform-specific definitions should be placed in this file.
* Note that this is NOT used by the LDAP or LBER libraries.
*/
/*
* SHARED DEFINITIONS - things you should change
*/
/* default ldap host */
#define LDAPHOST "localhost"
/* default place to start searching */
#define DEFAULT_BASE "c=US"
/*********************************************************************
* *
* You probably do not need to edit anything below this point *
* *
*********************************************************************/
/*
* SHARED DEFINITIONS - other things you can change
*/
/* default attribute to use when sorting entries, NULL => sort by DN */
/* default count of DN components to show in entry displays */
#define DEFAULT_RDNCOUNT 2
/* default config file locations */
#define FILTERFILE "/etc/opt/SUNWconn/ldap/current/ldapfilter.conf"
#define TEMPLATEFILE "/etc/opt/SUNWconn/ldap/current/ldaptemplates.conf"
#define SEARCHFILE "/etc/opt/SUNWconn/ldap/current/ldapsearchprefs.conf"
#define FRIENDLYFILE "/etc/opt/SUNWconn/ldap/current/ldapfriendly"
/*
* FINGER DEFINITIONS
*/
/* who to bind as */
#define FINGER_BINDDN NULL
/* where to search */
#define FINGER_BASE DEFAULT_BASE
/* banner to print */
#define FINGER_BANNER "X.500 Finger Service...\r\n"
/* who to report errors to */
#define FINGER_ERRORS "your local system administrator"
/* what to say if no matches are found */
#define FINGER_NOMATCH "Search failed to find anything.\r\n"
/* what to say if the service may be unavailable */
#define FINGER_UNAVAILABLE \
"The X.500 service may be temporarily unavailable.\r\n\
Please try again later.\r\n"
/* printed if a match has no email address - for disptmp default */
#define FINGER_NOEMAIL1 "None registered in this service."
#define FINGER_NOEMAIL2 NULL
/* maximum number of matches returned */
#define FINGER_SIZELIMIT 50
/* max number of hits displayed in full before a list is presented */
#define FINGER_LISTLIMIT 1
/* what to exec for "finger @host" */
#define FINGER_CMD "/usr/ucb/finger"
/* how to treat aliases when searching */
#define FINGER_DEREF LDAP_DEREF_FINDING
/* attribute to use when sorting results */
#define FINGER_SORT_ATTR SORT_ATTR
/* enable ufn support */
#define FINGER_UFN
/* timeout for searches */
#define FINGER_TIMEOUT 60
/* number of DN components to show in entry displays */
#define FINGER_RDNCOUNT DEFAULT_RDNCOUNT
/*
* GO500 GOPHER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define GO500_BINDDN NULL
/* where to search */
#define GO500_BASE DEFAULT_BASE
/* port on which to listen */
#define GO500_PORT 5555
/* how to handle aliases */
#define GO500_DEREF LDAP_DEREF_FINDING
/* attribute to use when sorting results */
#define GO500_SORT_ATTR SORT_ATTR
/* timeout for searches */
#define GO500_TIMEOUT 180
/* enable ufn support */
#define GO500_UFN
/*
* only set and uncomment this if your hostname() does not return
* a fully qualified hostname
*/
/* #define GO500_HOSTNAME "fully.qualified.hostname.here" */
/* number of DN components to show in entry displays */
#define GO500_RDNCOUNT DEFAULT_RDNCOUNT
/*
* GO500GW GOPHER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define GO500GW_BINDDN NULL
/* where the helpfile lives */
#define GO500GW_HELPFILE "go500gw.help"
/* port on which to listen */
#define GO500GW_PORT 7777
/* timeout on all searches */
#define GO500GW_TIMEOUT 180
/* enable ufn support */
#define GO500GW_UFN
/* attribute to use when sorting results */
#define GO500GW_SORT_ATTR SORT_ATTR
/*
* only set and uncomment this if your hostname() does not return
* a fully qualified hostname
*/
/* #define GO500GW_HOSTNAME "fully.qualified.hostname.here" */
/* number of DN components to show in entry displays */
#define GO500GW_RDNCOUNT DEFAULT_RDNCOUNT
/*
* RCPT500 MAIL RESPONDER GATEWAY DEFINITIONS
*/
/* who to bind as */
#define RCPT500_BINDDN NULL
/* where the helpfile lives */
#define RCPT500_HELPFILE "rcpt500.help"
/* maximum number of matches returned */
#define RCPT500_SIZELIMIT 50
/* address replies will appear to come from */
#define RCPT500_FROM "\"X.500 Query Program\" <X500-Query>"
/* command that will accept an RFC822 message text on standard
input, and send it. sendmail -t does this nicely. */
#define RCPT500_PIPEMAILCMD "/usr/lib/sendmail -t"
/* where to search */
#define RCPT500_BASE DEFAULT_BASE
/* attribute to use when sorting results */
#define RCPT500_SORT_ATTR SORT_ATTR
/* max number of hits displayed in full before a list is presented */
#define RCPT500_LISTLIMIT 1
/* enable ufn support */
#define RCPT500_UFN
/* number of DN components to show in entry displays */
#define RCPT500_RDNCOUNT DEFAULT_RDNCOUNT
/*
* LDAPSEARCH TOOL
*/
/* who to bind as */
#define LDAPSEARCH_BINDDN NULL
/* search base */
#define LDAPSEARCH_BASE DEFAULT_BASE
/*
* LDAPMODIFY TOOL
*/
/* who to bind as */
#define LDAPMODIFY_BINDDN NULL
/* search base */
#define LDAPMODIFY_BASE DEFAULT_BASE
/*
* LDAPDELETE TOOL
*/
/* who to bind as */
#define LDAPDELETE_BINDDN NULL
/* search base */
#define LDAPDELETE_BASE DEFAULT_BASE
/*
* LDAPMODRDN TOOL
*/
/* who to bind as */
#define LDAPMODRDN_BINDDN NULL
/* search base */
#define LDAPMODRDN_BASE DEFAULT_BASE
/*
* MAIL500 MAILER DEFINITIONS
*/
/* who to bind as */
#define MAIL500_BINDDN NULL
/* max number of ambiguous matches reported */
#define MAIL500_MAXAMBIGUOUS 10
/* max subscribers allowed (size limit when searching for them ) */
#define MAIL500_MAXGROUPMEMBERS LDAP_NO_LIMIT
/* timeout for all searches */
#define MAIL500_TIMEOUT 180
/* sendmail location - mail500 needs to exec this */
#define MAIL500_SENDMAIL "/usr/lib/sendmail"
/*
* UD DEFINITIONS
*/
/* ud configuration file */
/* default editor */
#define UD_DEFAULT_EDITOR "/usr/ucb/vi"
/* default bbasename of user config file */
#define UD_USER_CONFIG_FILE ".udrc"
/* default user to bind as */
/* default password to bind with */
/* default search base */
#define UD_BASE DEFAULT_BASE
/* default base where groups are created */
#define UD_WHERE_GROUPS_ARE_CREATED ""
/* default base below which all groups live */
#define UD_WHERE_ALL_GROUPS_LIVE ""
/*
* FAX500 DEFINITIONS
*/
/* what to bind as */
#define FAX_BINDDN NULL
/* how long to wait for searches */
#define FAX_TIMEOUT 180
/* maximum number of ambiguous matches reported */
#define FAX_MAXAMBIGUOUS 10
/* maximum number of members allowed */
#define FAX_MAXMEMBERS LDAP_NO_LIMIT
/* program to send mail */
#define FAX_SENDMAIL "/usr/lib/sendmail"
/*
* RP500 DEFINITIONS
*/
/* what to bind as */
/* prefix to add to non-fully-qualified numbers */
#define RP_PHONEPREFIX ""
/*
* SLAPD DEFINITIONS
*/
/* location of the default slapd config file */
#define SLAPD_DEFAULT_CONFIGFILE "/etc/opt/SUNWconn/ldap/current/slapd.conf"
/* default sizelimit on number of entries from a search */
#define SLAPD_DEFAULT_SIZELIMIT 10000
/* default timelimit to spend on a search */
#define SLAPD_DEFAULT_TIMELIMIT 3600
/* location of the slapd pid file */
/* location of the slapd args file */
#define SLAPD_ARGSFILE "/var/opt/SUNWconn/ldap/log/slapd.args"
/* dn of the special "monitor" entry */
#define SLAPD_MONITOR_DN "cn=monitor"
/* dn of the special "config" entry */
#define SLAPD_CONFIG_DN "cn=config"
/* minimum max ids that a single index entry can map to in ldbm */
#define SLAPD_LDBM_MIN_MAXIDS 4000
#endif /* _CONFIG_H */