ikedoor.h revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2000-2003 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#ifndef _IKEDOOR_H
#define _IKEDOOR_H
#pragma ident "%Z%%M% %I% %E% SMI"
#ifdef __cplusplus
extern "C" {
#endif
#include <limits.h>
#include <sys/sysmacros.h>
#include <door.h>
typedef enum {
} ike_svccmd_t;
#define IKE_SVC_MAX IKE_SVC_ERROR
/*
* Support structures/defines
*/
/*
* Debug categories. The debug level is a bitmask made up of
* flags indicating the desired categories; only 31 bits are
* available, as the highest-order bit designates an invalid
* setting.
*/
#define D_INVALID 0x80000000
#define D_HIGHBIT 0x00000200
#define D_ALL 0x000003ff
/*
* Access privilege levels: define level of access to keying information.
* The privileges granted at each level is a superset of the privileges
* granted at all lower levels.
*
* The door operations which require special privileges are:
*
* - receiving keying material for SAs and preshared key entries
* IKE_PRIV_KEYMAT must be set for this.
*
* IKE_PRIV_KEYMAT or IKE_PRIV_MODKEYS must be set to do this.
* If IKE_PRIV_MODKEYS is set, the information returned for a
* to get the key itself, IKE_PRIV_KEYMAT must be set.
*
* - modifying the privilege level: the daemon's privilege level
* is set when the daemon is started; the level may only be
* lowered via the door interface.
*
* All other operations are allowed at any privilege level.
*/
#define IKE_PRIV_MINIMUM 0
#define IKE_PRIV_MODKEYS 1
#define IKE_PRIV_KEYMAT 2
#define IKE_PRIV_MAXIMUM 2
/* global ike stats formatting structure */
typedef struct {
char st_pkcs11_libname[PATH_MAX];
} ike_stats_t;
/* data formatting structures for P1 SA dumps */
typedef struct {
struct sockaddr_storage loc_addr;
struct sockaddr_storage rem_addr;
#define beg_iprange loc_addr
#define end_iprange rem_addr
typedef struct {
} ike_cky_pr_t;
typedef struct {
} ike_p1_hdr_t;
/* values for p1hdr_xchg (aligned with RFC2408, section 3.1) */
#define IKE_XCHG_NONE 0
#define IKE_XCHG_BASE 1
#define IKE_XCHG_IDENTITY_PROTECT 2
#define IKE_XCHG_AUTH_ONLY 3
#define IKE_XCHG_AGGRESSIVE 4
/* following not from RFC; used only for preshared key definitions */
#define IKE_XCHG_IP_AND_AGGR 240
/* also not from RFC; used as wildcard */
#define IKE_XCHG_ANY 256
/* values for p1hdr_state */
#define IKE_SA_STATE_INVALID 0
#define IKE_SA_STATE_INIT 1
#define IKE_SA_STATE_SENT_SA 2
#define IKE_SA_STATE_SENT_KE 3
#define IKE_SA_STATE_SENT_LAST 4
#define IKE_SA_STATE_DONE 5
#define IKE_SA_STATE_DELETED 6
typedef struct {
/* values for p1xf_dh_group (aligned with RFC2409, Appendix A) */
#define IKE_GRP_DESC_MODP_768 1
#define IKE_GRP_DESC_MODP_1024 2
#define IKE_GRP_DESC_EC2N_155 3
#define IKE_GRP_DESC_EC2N_185 4
#define IKE_GRP_DESC_MODP_1536 5
/* values for p1xf_auth_meth (aligned with RFC2409, Appendix A) */
#define IKE_AUTH_METH_PRE_SHARED_KEY 1
#define IKE_AUTH_METH_DSS_SIG 2
#define IKE_AUTH_METH_RSA_SIG 3
#define IKE_AUTH_METH_RSA_ENCR 4
#define IKE_AUTH_METH_RSA_ENCR_REVISED 5
/* values for p1xf_prf */
#define IKE_PRF_NONE 0
#define IKE_PRF_HMAC_MD5 1
#define IKE_PRF_HMAC_SHA1 2
typedef struct {
/*
* NOTE: the new and del counters count the actual number of SAs,
* not the number of "suites", as defined in the ike monitoring
* mib draft; we do this because we don't have a good way of
* tracking the deletion of entire suites (we're notified of
* deleted qm sas individually).
*/
typedef struct {
typedef struct {
/*
* followed by (len - sizeof (ike_p1_key_t)) bytes of hex data,
* 64-bit aligned (pad bytes are added at the end, if necessary,
* and NOT INCLUDED in the len value, which reflects the actual
* key size).
*/
} ike_p1_key_t;
/* key info types for ike_p1_key_t struct */
#define IKE_KEY_PRESHARED 1
#define IKE_KEY_SKEYID 2
#define IKE_KEY_SKEYID_D 3
#define IKE_KEY_SKEYID_A 4
#define IKE_KEY_SKEYID_E 5
#define IKE_KEY_ENCR 6
#define IKE_KEY_IV 7
typedef struct {
/*
* variable-length structures will be included here, as
* stats and errors will be formatted as ike_p1_stats_t and
* ike_p1_errors_t, respectively.
* key info will be formatted as a series of p1_key_t structs.
*/
} ike_p1_sa_t;
#define MAX_LABEL_LEN 256
/* data formatting structure for policy (rule) dumps */
typedef struct {
char rule_label[MAX_LABEL_LEN];
/*
* Followed by several lists of variable-length structures, described
* by counts and offsets:
* transforms ike_p1_xform_t structs
* ranges of local ip addrs ike_addr_pr_t structs
* ranges of remote ip addrs ike_addr_pr_t structs
* local identification strings null-terminated ascii strings
* remote identification strings null-terminated ascii strings
*/
} ike_rule_t;
/*
* data formatting structure for preshared keys
* ps_ike_mode field uses the IKE_XCHG_* defs
*/
typedef struct {
/*
* followed by variable-length structures, as indicated by
* key info will be formatted as an array of bytes.
*/
} ike_ps_t;
/* identification types */
#define IKE_ID_IDENT_PAIR 1
#define IKE_ID_ADDR_PAIR 2
#define IKE_ID_CKY_PAIR 3
#define IKE_ID_LABEL 4
#define IKE_RW_LOC_DEFAULT 1
#define IKE_RW_LOC_USER_SPEC 2
/* door interface error codes */
/*
* IKE_SVC_GET_DBG
* Used to request the current debug level.
*
* Upon request, dbg_level is 0 (don't care).
*
* Upon return, dbg_level contains the current value.
*
*
* IKE_SVC_SET_DBG
* Used to request modification of the debug level.
*
* Upon request, dbg_level contains desired level. If debug output is
* to be directed to a different file, the fd should be passed in the
* door_desc_t field of the door_arg_t param. NOTE: if the daemon is
* currently running in the background with no debug set, an output
* file MUST be given.
*
* Upon return, dbg_level contains the old debug level, and acknowledges
* successful completion of the request. If an error is encountered,
* ike_err_t is returned instead, with appropriate error value and cmd
* IKE_SVC_ERROR.
*/
typedef struct {
} ike_dbg_t;
/*
* IKE_SVC_GET_PRIV
* Used to request the current privilege level.
*
* Upon request, priv_level is 0 (don't care).
*
* Upon return, priv_level contains the current value.
*
*
* IKE_SVC_SET_PRIV
* Used to request modification of the privilege level.
*
* Upon request, priv_level contains the desired level. The level may
* only be lowered via the door interface; it cannot be raised. Thus,
* if in.iked is started at the lowest level, it cannot be changed.
*
* Upon return, priv_level contains the old privilege level, and
* acknowledges successful completion of the request. If an error is
* encountered, ike_err_t is returned instead, with appropriate error
* value and cmd IKE_SVC_ERROR.
*/
typedef struct {
} ike_priv_t;
/*
* IKE_SVC_GET_STATS
* Used to request current statistics on Phase 1 SA creation and
* failures. The statistics represent all activity in in.iked.
*
* Upon request, cmd is set, and stat_len does not matter.
*
* Upon successful return, stat_len contains the total size of the
* returned buffer, which contains first the ike_statreq_t struct,
* followed by the stat data in the ike_stats_t structure. In case
* of an error in processing the request, ike_err_t is returned with
* IKE_SVC_ERROR command and appropriate error code.
*/
typedef struct {
/*
* IKE_SVC_DUMP_{P1S|RULES|PS}
* Used to request a table dump, and to return info for a single table
* item. The expectation is that all of the table data will be passed
* through the door, one entry at a time; an individual request must be
* sent for each entry, however (the door server can't send unrequested
* data).
*
* Upon request: cmd is set, and dump_next contains the item number
* requested (0 for first request). dump_len is 0; no data follows.
*
* Upon return: cmd is set, and dump_next contains the item number of
* the *next* item in the table (to be used in the subsequent request).
* dump_next = 0 indicates that this is the last item in the table.
* dump_len is the total length (data + struct) returned. Data is
* formatted as indicated by the cmd type:
* IKE_SVC_DUMP_P1S: ike_p1_sa_t
* IKE_SVC_DUMP_RULES: ike_rule_t
* IKE_SVC_DUMP_PS: ike_ps_t
*/
typedef struct {
union {
struct {
} dump_actual;
} dump_u;
/* dump_len - sizeof (ike_dump_t) bytes of data included here */
} ike_dump_t;
/*
* IKE_SVC_GET_{P1|RULE|PS}
* Used to request and return individual table items.
*
* Upon request: get_len is the total msg length (struct + id data);
* get_idtype indicates the type of identification being used.
* IKE_SVC_GET_P1: ike_addr_pr_t or ike_cky_pr_t
* IKE_SVC_GET_RULE: char string (label)
* IKE_SVC_GET_PS: ike_addr_pr_t or pair of sadb_ident_t
*
* Upon return: get_len is the total size (struct + data), get_idtype
* is unused, and the data that follows is formatted according to cmd:
* IKE_SVC_GET_P1: ike_p1_sa_t
* IKE_SVC_GET_RULE: ike_rule_t
* IKE_SVC_GET_PS: ike_ps_t
*/
typedef struct {
union {
struct {
} get_actual;
} get_u;
/* get_len - sizeof (ike_get_t) bytes of data included here */
} ike_get_t;
/*
* IKE_SVC_NEW_{RULE|PS}
* Used to request and acknowledge insertion of a table item.
*
* Upon request: new_len is the total (data + struct) size passed, or 0.
* new_len = 0 => a door_desc_t is also included with a file descriptor
* for a file containing the data to be added. The file should include
* a single item: a rule, or a pre-shared key. For new_len != 0, the
* data is formatted according to the cmd type:
* IKE_SVC_NEW_RULE: ike_rule_t
* IKE_SVC_NEW_PS: ike_ps_t
*
* Upon return: new_len is 0; simply acknowledges successful insertion
* of the requested item. If insertion is not successful, ike_err_t is
* returned instead with appropriate error value.
*/
typedef struct {
/* new_len - sizeof (ike_new_t) bytes included here */
} ike_new_t;
/*
* IKE_SVC_DEL_{P1|RULE|PS}
* Used to request and acknowledge the deletion of an individual table
* item.
*
* Upon request: del_len is the total msg length (struct + id data);
* del_idtype indicates the type of identification being used.
* IKE_SVC_DEL_P1: ike_addr_pr_t or ike_cky_pr_t
* IKE_SVC_DEL_RULE: char string (label)
* IKE_SVC_DEL_PS: ike_addr_pr_t or pair of sadb_ident_t
*
* Upon return: acknowledges deletion of the requested item; del_len and
* del_idtype are unspecified. If deletion is not successful, ike_err_t
* is returned instead with appropriate error value.
*/
typedef struct {
/* del_len - sizeof (ike_del_t) bytes of data included here. */
} ike_del_t;
/*
* IKE_SVC_READ_{RULES|PS}
* Used to ask daemon to re-read particular configuration info.
*
* Upon request: rw_loc indicates where the info should be read from:
* either from a user-supplied file descriptor(s), or from the default
* location(s). If rw_loc indicates user-supplied location, the file
* descriptor(s) should be passed in the door_desc_t struct. For the
* IKE_SVC_READ_RULES cmd, two file descriptors should be specified:
* first, one for the config file which contains the data to be read,
* and second, one for the cookie file which will be written to as
* in.iked process the config file.
*
* Upon return: rw_loc is unspecified; the message simply acknowledges
* successful completion of the request. If an error occurred,
* ike_err_t is returned instead with appropriate error value.
*
*
* IKE_SVC_WRITE_{RULES|PS}
* Used to ask daemon to write its current config info to files.
*
* Request and return are handled the same as for the IKE_SVC_READ_*
* cmds; however, the rw_loc MUST be a user-supplied location. Also,
* for the IKE_SVC_WRITE_RULES cmd, the cookie file fd is not required;
* only a single fd, for the file to which the config info should be
* written, should be passed in.
*/
typedef struct {
} ike_rw_t;
/*
* IKE_SVC_FLUSH_P1S
* Used to request and acknowledge tear-down of all P1 SAs.
*/
typedef struct {
} ike_flush_t;
/*
* IKE_SVC_ERROR
* Used on return if server encountered an error while processing
* the request. An appropriate error code is included (as defined
* in this header file); in the case of IKE_ERR_SYS_ERR, a value
* from the UNIX errno space is included in the ike_err_unix field.
*/
typedef struct {
} ike_err_t;
/*
*/
typedef struct {
} ike_cmd_t;
/*
*/
typedef union {
#ifdef __cplusplus
}
#endif
#endif /* _IKEDOOR_H */