fs.h revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* Mach Operating System
* Copyright (c) 1991,1990 Carnegie Mellon University
* All Rights Reserved.
*
* Permission to use, copy, modify and distribute this software and its
* documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie Mellon
* the rights to redistribute these changes.
*/
/*
* Copyright (c) 1982, 1986 Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms are permitted
* provided that the above copyright notice and this paragraph are
* duplicated in all such forms and that any documentation,
* advertising materials, and other materials related to such
* distribution and use acknowledge that the software was developed
* by the University of California, Berkeley. The name of the
* University may not be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
* @(#)fs.h 7.7 (Berkeley) 5/9/89
*/
/*
* Each disk drive contains some number of file systems.
* A file system consists of a number of cylinder groups.
* Each cylinder group has inodes and data.
*
* A file system is described by its super-block, which in turn
* describes the cylinder groups. The super-block is critical
* data and is replicated in each cylinder group to protect against
* catastrophic loss. This is done at `newfs' time and the critical
* super-block data does not change, so the copies need not be
* referenced further unless disaster strikes.
*
* For file system fs, the offsets of the various blocks of interest
* are given in the super block as:
* [fs->fs_sblkno] Super-block
* [fs->fs_cblkno] Cylinder group block
* [fs->fs_iblkno] Inode blocks
* [fs->fs_dblkno] Data blocks
* The beginning of cylinder group cg in fs, is given by
* the ``cgbase(fs, cg)'' macro.
*
* The first boot and super blocks are given in absolute disk addresses.
* The byte-offset forms are preferred, as they don't imply a sector size.
*/
#define BBSIZE 8192
#define SBSIZE 8192
#define BBOFF ((mach_off_t)(0))
#define BBLOCK ((mach_daddr_t)(0))
/*
* Addresses stored in inodes are capable of addressing fragments
* of `blocks'. File system blocks of at most size MAXBSIZE can
* be optionally broken into 2, 4, or 8 pieces, each of which is
* addressible; these pieces may be DEV_BSIZE, or some multiple of
* a DEV_BSIZE unit.
*
* Large files consist of exclusively large data blocks. To avoid
* undue wasted disk space, the last data block of a small file may be
* allocated as only as many fragments of a large block as are
* necessary. The file system format retains only a single pointer
* to such a fragment, which is a piece of a single large block that
* has been divided. The size of such a fragment is determinable from
* information in the inode, using the ``blksize(fs, ip, lbn)'' macro.
*
* The file system records space availability at the fragment level;
* to determine block availability, aligned fragments are examined.
*
* The root inode is the root of the file system.
* Inode 0 can't be used for normal purposes and
* historically bad blocks were linked to inode 1,
* thus the root inode is 2. (inode 1 is no longer used for
* this purpose, however numerous dump tapes make this
* assumption, so we are stuck with it)
*/
/*
* MINBSIZE is the smallest allowable block size.
* In order to insure that it is possible to create files of size
* 2^32 with only two levels of indirection, MINBSIZE is set to 4096.
* MINBSIZE must be big enough to hold a cylinder group block,
* thus changes to (struct cg) must keep its size within MINBSIZE.
* Note that super blocks are always of size SBSIZE,
* and that both SBSIZE and MAXBSIZE must be >= MINBSIZE.
*/
#define MINBSIZE 4096
/*
* The path name on which the file system is mounted is maintained
* in fs_fsmnt. MAXMNTLEN defines the amount of space allocated in
* the super block for this name.
* The limit on the amount of summary information per file system
* is defined by MAXCSBUFS. It is currently parameterized for a
* maximum of two million cylinders.
*/
#define MAXMNTLEN 512
#define MAXCSBUFS 32
/*
* Per cylinder group information; summarized in blocks allocated
* from first cylinder group data blocks. These blocks have to be
* read in from fs_csaddr (size fs_cssize) in addition to the
* super block.
*
* N.B. sizeof(struct csum) must be a power of two in order for
* the ``fs_cs'' macro to work (see below).
*/
struct csum
{
int cs_ndir; /* number of directories */
int cs_nbfree; /* number of free blocks */
int cs_nifree; /* number of free inodes */
int cs_nffree; /* number of free frags */
};
/*
* Super block for a file system.
*/
#define FS_MAGIC 0x011954
struct fs
{
int xxx1; /* struct fs *fs_link; */
int xxx2; /* struct fs *fs_rlink; */
int fs_cgoffset; /* cylinder group offset in cylinder */
int fs_cgmask; /* used to calc mod fs_ntrak */
int fs_size; /* number of blocks in fs */
int fs_dsize; /* number of data blocks in fs */
int fs_ncg; /* number of cylinder groups */
int fs_bsize; /* size of basic blocks in fs */
int fs_fsize; /* size of frag blocks in fs */
int fs_frag; /* number of frags in a block in fs */
/* these are configuration parameters */
int fs_minfree; /* minimum percentage of free blocks */
int fs_rotdelay; /* num of ms for optimal next block */
int fs_rps; /* disk revolutions per second */
/* these fields can be computed from the others */
int fs_bmask; /* ``blkoff'' calc of blk offsets */
int fs_fmask; /* ``fragoff'' calc of frag offsets */
int fs_bshift; /* ``lblkno'' calc of logical blkno */
int fs_fshift; /* ``numfrags'' calc number of frags */
/* these are configuration parameters */
int fs_maxcontig; /* max number of contiguous blks */
int fs_maxbpg; /* max number of blks per cyl group */
/* these fields can be computed from the others */
int fs_fragshift; /* block to frag shift */
int fs_fsbtodb; /* fsbtodb and dbtofsb shift constant */
int fs_sbsize; /* actual size of super block */
int fs_csmask; /* csum block offset */
int fs_csshift; /* csum block number */
int fs_nindir; /* value of NINDIR */
int fs_inopb; /* value of INOPB */
int fs_nspf; /* value of NSPF */
/* yet another configuration parameter */
int fs_optim; /* optimization preference, see below */
/* these fields are derived from the hardware */
int fs_interleave; /* hardware sector interleave */
int fs_trackskew; /* sector 0 skew, per track */
int fs_headswitch; /* head switch time, usec */
int fs_trkseek; /* track-to-track seek, usec */
/* sizes determined by number of cylinder groups and their sizes */
int fs_cssize; /* size of cyl grp summary area */
int fs_cgsize; /* cylinder group size */
/* these fields are derived from the hardware */
int fs_ntrak; /* tracks per cylinder */
int fs_nsect; /* sectors per track */
int fs_spc; /* sectors per cylinder */
/* this comes from the disk driver partitioning */
int fs_ncyl; /* cylinders in file system */
/* these fields can be computed from the others */
int fs_cpg; /* cylinders per group */
int fs_ipg; /* inodes per group */
int fs_fpg; /* blocks per group * fs_frag */
/* this data must be re-computed after crashes */
/* these fields are cleared at mount time */
char fs_fmod; /* super block modified flag */
char fs_clean; /* file system is clean flag */
char fs_ronly; /* mounted read-only flag */
char fs_flags; /* currently unused flag */
/* these fields retain the current block allocation info */
int fs_cgrotor; /* last cg searched */
#if 1
int was_fs_csp[MAXCSBUFS];
#else
#endif
int fs_cpc; /* cyl per cycle in postbl */
long fs_contigsumsize; /* size of cluster summary array */
long fs_maxsymlinklen; /* max length of an internal symlink */
long fs_inodefmt; /* format of on-disk inodes */
long fs_state; /* validate fs_clean field */
int fs_postblformat; /* format of positional layout tables */
int fs_nrpos; /* number of rotaional positions */
int fs_postbloff; /* (short) rotation block list head */
int fs_rotbloff; /* (u_char) blocks for each rotation */
int fs_magic; /* magic number */
/* actually longer */
};
/*
* Preference for optimization.
*/
#define FS_OPTTIME 0 /* minimize allocation time */
/*
* Rotational layout table format types
*/
/*
* Macros for access to superblock array structures
*/
/*
* Convert cylinder group to base address of its global summary info.
*
* N.B. This macro assumes that sizeof(struct csum) is a power of two.
*/
/*
* Cylinder group block for a file system.
*/
#define CG_MAGIC 0x090255
struct cg
{
int xxx1; /* struct cg *cg_link; */
int cg_magic; /* magic number */
int cg_cgx; /* we are the cgx'th cylinder group */
short cg_ncyl; /* number of cyl's this cg */
short cg_niblk; /* number of inode blocks this cg */
int cg_ndblk; /* number of data blocks this cg */
int cg_rotor; /* position of last used block */
int cg_frotor; /* position of last used frag */
int cg_irotor; /* position of last used inode */
int cg_btotoff; /* (long) block totals per cylinder */
int cg_boff; /* (short) free block positions */
int cg_iusedoff; /* (char) used inode map */
int cg_freeoff; /* (u_char) free block map */
int cg_nextfreeoff; /* (u_char) next available space */
/* actually longer */
};
/*
* Macros for access to cylinder group array structures
*/
#define cg_inosused(cgp) \
#define cg_blksfree(cgp) \
#define cg_chkmagic(cgp) \
/*
* The following structure is defined
* for compatibility with old file systems.
*/
struct ocg
{
int xxx1; /* struct ocg *cg_link; */
int xxx2; /* struct ocg *cg_rlink; */
int cg_cgx; /* we are the cgx'th cylinder group */
short cg_ncyl; /* number of cyl's this cg */
short cg_niblk; /* number of inode blocks this cg */
int cg_ndblk; /* number of data blocks this cg */
int cg_rotor; /* position of last used block */
int cg_frotor; /* position of last used frag */
int cg_irotor; /* position of last used inode */
int cg_magic; /* magic number */
/* actually longer */
};
/*
* Turn file system block numbers into disk block addresses.
* This maps file system blocks to device size blocks.
*/
/*
* Cylinder group macros to locate things in cylinder groups.
* They calc file system addresses of cylinder group data structures.
*/
/*
* Macros for handling inode numbers:
* inode number to file system block offset.
* inode number to cylinder group number.
* inode number to file system block address.
*/
/*
* Give cylinder group number for a file system block.
* Give cylinder group block number for a file system block.
*/
/*
* Extract the bits for a block from a map.
* Compute the cylinder and rotational position of a cyl block addr.
*/
/*
* The following macros optimize certain frequently calculated
* quantities by using shifts and masks in place of divisions
* modulos and multiplications.
*/
/*
* Determine the number of available frags given a
* percentage to hold in reserve
*/
/*
* Determining the size of a file block in the file system.
*/
/*
* Number of disk sectors per block; assumes DEV_BSIZE byte sector size.
*/
/*
* INOPB is the number of inodes in a secondary storage block.
*/
/*
* NINDIR is the number of indirects in a file system block.
*/