ypinit.sh revision 7c478bd95313f5f23a4c958a745db2134aa03244
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License"). You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2004 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
# All Rights Reserved
# Portions of this source code were derived from Berkeley 4.3 BSD
# under license from the Regents of the University of California.
#ident "%Z%%M% %I% %E% SMI"
# set -xv
maps="publickey publickey.byname"
clientp=F
masterp=F
slavep=F
host=""
def_dom=""
master=""
[ $? = 0 ] || echo "ypinit: unable to temporarily disable $1"
[ $? = 0 ] || echo "ypinit: unable to enable $1 for next boot"
}
[ $? = 0 ] || echo "ypinit: unable to enable $1"
}
export PATH
# To do cleanup
case $# in
-c) clientp=T;;
-m) masterp=T;;
*) echo 'usage:'
echo ' ypinit -c'
echo ' ypinit -m'
echo ' ypinit -s master_server'
echo ""
echo "\
where -c is used to set up a yp client, -m is used to build a master "
echo "\
yp server data base, and -s is used for a slave data base."
echo "\
master_server must be an existing reachable yp server."
exit 1;;
esac;;
if ( grep $master $hosts_file $hosts6_file > /dev/null )
then
echo ""
else
echo "server not found in $hosts_file or $hosts6_file"
exit 1
fi;;
*) echo 'usage:'
echo ' ypinit -c'
echo ' ypinit -m'
echo ' ypinit -s master_server'
echo ""
echo "\
where -c is used to set up a yp client, -m is used to build a master "
echo "\
yp server data base, and -s is used for a slave data base."
echo "\
master_server must be an existing reachable yp server."
exit 1;;
esac;;
-c) clientp=T;;
*) echo 'usage:'
echo ' ypinit -c'
echo ' ypinit -m'
echo ' ypinit -s master_server'
echo ""
echo "\
where -c is used to set up a yp client, -m is used to build a master "
echo "\
yp server data base, and -s is used for a slave data base."
echo "\
master_server must be an existing reachable yp server."
exit 1;;
esac;;
*) echo 'usage:'
echo ' ypinit -c'
echo ' ypinit -m'
echo ' ypinit -s master_server'
echo ""
echo "\
where -c is used to set up a yp client, -m is used to build a master "
echo "\
yp server data base, and -s is used for a slave data base."
echo "\
master_server must be an existing reachable yp server."
exit 1;;
esac
if [ $? -ne 0 ]
then
echo "\
You have to be the superuser to run this. Please log in as root."
exit 1
fi
if [ $? -ne 0 ]
then
echo "Can't get local host's name. Please check your path."
exit 1
fi
if [ -z "$host" ]
then
echo "The local host's name hasn't been set. Please set it."
exit 1
fi
if [ $? -ne 0 ]
then
echo "Can't get local host's domain name. Please check your path."
exit 1
fi
if [ -z "$def_dom" ]
then
echo "The local host's domain name hasn't been set. Please set it."
exit 1
fi
#def_dom=`ypalias -d $def_dom`
domain_dir="$yproot_dir""/""$def_dom"
binding_dir="$yproot_dir""/binding/""$def_dom"
binding_file="$yproot_dir""/binding/""$def_dom""/ypservers"
if [ ! -d $yproot_dir -o -f $yproot_dir ]
then
echo "\
The directory $yproot_dir doesn't exist. Restore it from the distribution."
exit 1
fi
# add domainname and ypservers aliases to aliases file
if [ ! -d "$yproot_dir"/binding ]
then
fi
if [ ! -d $binding_dir ]
then
fi
if [ $slavep = F ]
then
while [ $got_host_list = F ]; do
echo ""
echo "\
In order for NIS to operate sucessfully, we have to construct a list of the "
echo "\
NIS servers. Please continue to add the names for YP servers in order of"
echo "\
preference, one per line. When you are done with the list, type a <control D>"
echo "\
or a return on a line by itself."
if [ $masterp = T ]
then
echo "\tnext host to add: $host"
elif [ -f $binding_file ]
then
if [ $first_time = T ]
then
for h in `cat $binding_file`
do
echo $h >> $hf
echo "\tnext host to add: $h"
done
fi
fi
echo "\tnext host to add: \c"
while read h ; test -n "$h"
do
if ( grep $h $hosts_file $hosts6_file > /dev/null )
then
echo $h >> $hf
echo "\tnext host to add: \c"
else
echo "host $h not found in $hosts_file or $hosts6_file. Not added to the list"
echo ""
echo "Do you wish to abort [y/n: y] \c"
read cont_ok
n*) echo "\tnext host to add: \c";;
N*) echo "\tnext host to add: \c";;
*) exit 1;;
esac
fi
done
echo ""
if [ -s $hf ]
then
echo "The current list of yp servers looks like this:"
echo ""
echo ""
echo "Is this correct? [y/n: y] \c"
else
echo "You have not added any server information."
echo ""
echo "Do you still wish to exit? [y/n: y] \c"
fi
read hlist_ok
n*) got_host_list=F
echo "Let's try the whole thing again...";;
N*) got_host_list=F
echo "Let's try the whole thing again...";;
*) got_host_list=T;;
esac
done
if [ -s $hf ]
then
fi
fi
#
# Start client service on next boot, unless we're establishing a slave
# server, in which case the binding is needed now (or should be
# preserved).
#
if [ $slavep = T ]
then
else
fi
#
# As a client, our configuration is correct once a binding file is
# established, and so we can exit (making sure we're no longer a server,
# of course).
#
if [ $clientp = T ]
then
exit 0
fi
if [ $slavep = T ]
then
then
echo "\
The host specified should be a running master yp server, not this machine."
exit 1
fi
if [ -z "$maps" ]
then
echo "Can't enumerate maps from $master. Please check that it is running."
exit 1
fi
fi
echo ""
echo "Installing the YP database will require that you answer a few questions."
echo "Questions will all be asked at the beginning of the procedure."
echo ""
echo "Do you want this procedure to quit on non-fatal errors? [y/n: n] \c"
read doexit
y*) exit_on_error=T;;
Y*) exit_on_error=T;;
*) echo "\
OK, please remember to go back and redo manually whatever fails. If you"
echo "\
don't, some part of the system (perhaps the yp itself) won't work.";;
esac
echo "The yp domain directory is $yproot_dir""/""$def_dom"
do
if [ -d $dir ]; then
echo "Can we destroy the existing $dir and its contents? [y/n: n] \c"
read kill_old_dir
case $kill_old_dir in
if [ $? -ne 0 ]
then
echo "Can't clean up old directory $dir. Fatal error."
exit 1
fi;;
if [ $? -ne 0 ]
then
echo "Can't clean up old directory $dir. Fatal error."
exit 1
fi;;
*) echo "OK, please clean it up by hand and start again. Bye"
exit 0;;
esac
fi
if [ $? -ne 0 ]
then
echo "Can't make new directory $dir. Fatal error."
exit 1
fi
done
if [ $slavep = T ]
then
echo "\
There will be no further questions. The remainder of the procedure should take"
echo "a few minutes, to copy the data bases from $master."
do
do
echo "Transferring $map..."
if [ $? -ne 0 ]
then
if [ $exit_on_error = T ]
then
exit 1
fi
fi
done
done
echo ""
echo "${host}'s nis data base has been set up\n"
if [ $errors_in_setup = T ]
then
echo " with errors. Please remember"
echo "to figure out what went wrong, and fix it."
else
echo " without any errors."
fi
# enable slave services
exit 0
else
rm -f $yproot_dir/*.time
echo "\
There will be no further questions. The remainder of the procedure should take"
echo "5 to 10 minutes."
echo "Building $yproot_dir/$def_dom/ypservers..."
if [ $? -ne 0 ]
then
echo "\
Couldn't build yp data base $yproot_dir/$def_dom/$ypservers_map."
if [ $exit_on_error = T ]
then
exit 1
fi
fi
in_pwd=`pwd`
cd $yproot_dir
echo "Running \c"
echo $yproot_dir "\c"
echo "/Makefile..."
if [ $? -ne 0 ]
then
echo "\
Error running Makefile."
if [ $exit_on_error = T ]
then
exit 1
fi
fi
cd $in_pwd
echo ""
echo "\
$host has been set up as a yp master server\c"
if [ $errors_in_setup = T ]
then
echo " with errors. Please remember"
echo "to figure out what went wrong, and fix it."
else
echo " without any errors."
fi
echo ""
echo "\
If there are running slave yp servers, run yppush now for any data bases"
echo "\
which have been changed. If there are no running slaves, run ypinit on"
echo "\
those hosts which are to be slave servers."
# enable master services
fi