ex_vops2.c revision 3a5240e95e08e42ac1fc82775b3d0ba6e072a74c
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
/* All Rights Reserved */
/* Copyright (c) 1981 Regents of the University of California */
#pragma ident "%Z%%M% %I% %E% SMI"
#include "ex.h"
#include "ex_tty.h"
#include "ex_vis.h"
#ifndef PRESUNEUC
#include <wctype.h>
/* Undef putchar/getchar if they're defined. */
#ifdef putchar
# undef putchar
#endif
#ifdef getchar
# undef getchar
#endif
#endif /* PRESUNEUC */
extern size_t strlcpy(char *, const char *, size_t);
/*
* Low level routines for operations sequences,
* and mostly, insert mode (and a subroutine
* to read an input line, including in the echo area.)
*/
extern unsigned char *vUA1, *vUA2; /* extern; also in ex_vops.c */
extern unsigned char *vUD1, *vUD2; /* extern; also in ex_vops.c */
int vmaxrep(unsigned char, int);
static void imultlinerep(int, line *, int, int);
static void omultlinerep(int, line *, int);
static void fixdisplay(void);
/*
* Obleeperate characters in hardcopy
* open with \'s.
*/
void
bleep(int i, unsigned char *cp)
{
i -= lcolumn(nextchr(cp));
do
putchar('\\' | QUOTE);
while (--i >= 0);
rubble = 1;
}
/*
* Common code for middle part of delete
* and change operating on parts of lines.
*/
int
vdcMID(void)
{
unsigned char *cp;
squish();
setLAST();
if (FIXUNDO)
vundkind = VCHNG, CP(vutmp, linebuf);
if (wcursor < cursor)
cp = wcursor, wcursor = cursor, cursor = cp;
vUD1 = vUA1 = vUA2 = cursor; vUD2 = wcursor;
return (lcolumn(wcursor));
}
/*
* Take text from linebuf and stick it
* in the VBSIZE buffer BUF. Used to save
* deleted text of part of line.
*/
void
takeout(unsigned char *BUF)
{
unsigned char *cp;
if (wcursor < linebuf)
wcursor = linebuf;
if (cursor == wcursor) {
(void) beep();
return;
}
if (wcursor < cursor) {
cp = wcursor;
wcursor = cursor;
cursor = cp;
}
setBUF(BUF);
if ((unsigned char)BUF[128] == 0200)
(void) beep();
}
/*
* Are we at the end of the printed representation of the
* line? Used internally in hardcopy open.
*/
int
ateopr(void)
{
wchar_t i, c;
wchar_t *cp = vtube[destline] + destcol;
for (i = WCOLS - destcol; i > 0; i--) {
c = *cp++;
if (c == 0) {
/*
* Optimization to consider returning early, saving
* CPU time. We have to make a special check that
* we aren't missing a mode indicator.
*/
if (destline == WECHO && destcol < WCOLS-11 && vtube[WECHO][WCOLS-20])
return 0;
return (1);
}
if (c != ' ' && (c & QUOTE) == 0)
return (0);
}
return (1);
}
/*
* Append.
*
* This routine handles the top level append, doing work
* as each new line comes in, and arranging repeatability.
* It also handles append with repeat counts, and calculation
* of autoindents for new lines.
*/
bool vaifirst;
bool gobbled;
unsigned char *ogcursor;
static int INSCDCNT; /* number of ^D's (backtabs) in insertion buffer */
static int inscdcnt; /*
* count of ^D's (backtabs) not seen yet when doing
* repeat of insertion
*/
void
vappend(int ch, int cnt, int indent)
{
int i;
unsigned char *gcursor;
bool escape;
int repcnt, savedoomed;
short oldhold = hold;
int savecnt = cnt;
line *startsrcline;
int startsrccol, endsrccol;
int gotNL = 0;
int imultlinecnt = 0;
int omultlinecnt = 0;
if ((savecnt > 1) && (ch == 'o' || ch == 'O')) {
omultlinecnt = 1;
}
#ifdef XPG6
if ((savecnt > 1) && (ch == 'a' || ch == 'A' || ch == 'i' || ch == 'I'))
imultlinecnt = 1;
#endif /* XPG6 */
/*
* Before a move in hardopen when the line is dirty
* or we are in the middle of the printed representation,
* we retype the line to the left of the cursor so the
* insert looks clean.
*/
if (ch != 'o' && state == HARDOPEN && (rubble || !ateopr())) {
rubble = 1;
gcursor = cursor;
i = *gcursor;
*gcursor = ' ';
wcursor = gcursor;
(void) vmove();
*gcursor = i;
}
vaifirst = indent == 0;
/*
* Handle replace character by (eventually)
* limiting the number of input characters allowed
* in the vgetline routine.
*/
if (ch == 'r')
repcnt = 2;
else
repcnt = 0;
/*
* If an autoindent is specified, then
* generate a mixture of blanks to tabs to implement
* it and place the cursor after the indent.
* Text read by the vgetline routine will be placed in genbuf,
* so the indent is generated there.
*/
if (value(vi_AUTOINDENT) && indent != 0) {
unsigned char x;
gcursor = genindent(indent);
*gcursor = 0;
vgotoCL(nqcolumn(lastchr(linebuf, cursor), genbuf));
} else {
gcursor = genbuf;
*gcursor = 0;
if (ch == 'o')
vfixcurs();
}
/*
* Prepare for undo. Pointers delimit inserted portion of line.
*/
vUA1 = vUA2 = cursor;
/*
* If we are not in a repeated command and a ^@ comes in
* then this means the previous inserted text.
* If there is none or it was too long to be saved,
* then beep() and also arrange to undo any damage done
* so far (e.g. if we are a change.)
*/
switch (ch) {
case 'r':
break;
case 'a':
/*
* TRANSLATION_NOTE
* "A" is a terse mode message corresponding to
* "APPEND MODE".
* Translated message of "A" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("A"));
} else {
vshowmode(gettext("APPEND MODE"));
}
break;
case 's':
/*
* TRANSLATION_NOTE
* "S" is a terse mode message corresponding to
* "SUBSTITUTE MODE".
* Translated message of "S" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("S"));
} else {
vshowmode(gettext("SUBSTITUTE MODE"));
}
break;
case 'c':
/*
* TRANSLATION_NOTE
* "C" is a terse mode message corresponding to
* "CHANGE MODE".
* Translated message of "C" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("C"));
} else {
vshowmode(gettext("CHANGE MODE"));
}
break;
case 'R':
/*
* TRANSLATION_NOTE
* "R" is a terse mode message corresponding to
* "REPLACE MODE".
* Translated message of "R" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("R"));
} else {
vshowmode(gettext("REPLACE MODE"));
}
break;
case 'o':
/*
* TRANSLATION_NOTE
* "O" is a terse mode message corresponding to
* "OPEN MODE".
* Translated message of "O" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("O"));
} else {
vshowmode(gettext("OPEN MODE"));
}
break;
case 'i':
/*
* TRANSLATION_NOTE
* "I" is a terse mode message corresponding to
* "INSERT MODE" and the following "INPUT MODE".
* Translated message of "I" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INSERT MODE"));
}
break;
default:
/*
* TRANSLATION_NOTE
* "I" is a terse mode message corresponding to
* "INPUT MODE" and the previous "INSERT MODE".
* Translated message of "I" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INPUT MODE"));
}
}
ixlatctl(1);
if ((vglobp && *vglobp == 0) || peekbr()) {
if (INS[128] == 0200) {
(void) beep();
if (!splitw)
ungetkey('u');
doomed = 0;
hold = oldhold;
return;
}
/*
* Unread input from INS.
* An escape will be generated at end of string.
* Hold off n^^2 type update on dumb terminals.
*/
vglobp = INS;
inscdcnt = INSCDCNT;
hold |= HOLDQIK;
} else if (vglobp == 0) {
/*
* Not a repeated command, get
* a new inserted text for repeat.
*/
INS[0] = 0;
INS[128] = 0;
INSCDCNT = 0;
}
/*
* For wrapmargin to hack away second space after a '.'
* when the first space caused a line break we keep
* track that this happened in gobblebl, which says
* to gobble up a blank silently.
*/
gobblebl = 0;
startsrcline = dot;
startsrccol = cursor - linebuf;
/*
* Text gathering loop.
* New text goes into genbuf starting at gcursor.
* cursor preserves place in linebuf where text will eventually go.
*/
if (*cursor == 0 || state == CRTOPEN)
hold |= HOLDROL;
for (;;) {
if (ch == 'r' && repcnt == 0)
escape = 0;
else {
ixlatctl(1);
gcursor = vgetline(repcnt, gcursor, &escape, ch);
/* vgetline() only returns when it got ESCAPE or NL */
if (escape == '\n') {
gotNL = 1;
} else {
/*
* Upon escape, gcursor is pointing to '\0'
* terminating the string in genbuf.
*/
endsrccol = gcursor - genbuf - 1;
}
ixlatctl(0);
/*
* After an append, stick information
* about the ^D's and ^^D's and 0^D's in
* the repeated text buffer so repeated
* inserts of stuff indented with ^D as backtab's
* can work.
*/
if (HADUP)
addtext("^");
else if (HADZERO)
addtext("0");
if(!vglobp)
INSCDCNT = CDCNT;
while (CDCNT > 0) {
addtext("\004");
CDCNT--;
}
if (gobbled)
addtext(" ");
addtext(ogcursor);
}
repcnt = 0;
/*
* Smash the generated and preexisting indents together
* and generate one cleanly made out of tabs and spaces
* if we are using autoindent.
*/
if (!vaifirst && value(vi_AUTOINDENT)) {
i = fixindent(indent);
if (!HADUP)
indent = i;
gcursor = strend(genbuf);
}
/*
* Set cnt to 1 to avoid repeating the text on the same line.
* Do this for commands 'i', 'I', 'a', and 'A', if we're
* inserting anything with a newline for XPG6. Always do this
* for commands 'o' and 'O'.
*/
if ((imultlinecnt && gotNL) || omultlinecnt) {
cnt = 1;
}
/*
* Limit the repetition count based on maximum
* possible line length; do output implied
* by further count (> 1) and cons up the new line
* in linebuf.
*/
cnt = vmaxrep(ch, cnt);
CP(gcursor + 1, cursor);
do {
CP(cursor, genbuf);
if (cnt > 1) {
int oldhold = hold;
Outchar = vinschar;
hold |= HOLDQIK;
viprintf("%s", genbuf);
hold = oldhold;
Outchar = vputchar;
}
cursor += gcursor - genbuf;
} while (--cnt > 0);
endim();
vUA2 = cursor;
if (escape != '\n')
CP(cursor, gcursor + 1);
/*
* If doomed characters remain, clobber them,
* and reopen the line to get the display exact.
*/
if (state != HARDOPEN) {
DEPTH(vcline) = 0;
savedoomed = doomed;
if (doomed > 0) {
int cind = cindent();
physdc(cind, cind + doomed);
doomed = 0;
}
if(MB_CUR_MAX > 1)
rewrite = _ON;
i = vreopen(LINE(vcline), lineDOT(), vcline);
if(MB_CUR_MAX > 1)
rewrite = _OFF;
#ifdef TRACE
if (trace)
fprintf(trace, "restoring doomed from %d to %d\n", doomed, savedoomed);
#endif
if (ch == 'R')
doomed = savedoomed;
}
/*
* All done unless we are continuing on to another line.
*/
if (escape != '\n') {
vshowmode("");
break;
}
/*
* Set up for the new line.
* First save the current line, then construct a new
* first image for the continuation line consisting
* of any new autoindent plus the pushed ahead text.
*/
killU();
addtext(gobblebl ? " " : "\n");
vsave();
cnt = 1;
if (value(vi_AUTOINDENT)) {
if (value(vi_LISP))
indent = lindent(dot + 1);
else
if (!HADUP && vaifirst)
indent = whitecnt(linebuf);
vaifirst = 0;
strcLIN(vpastwh(gcursor + 1));
gcursor = genindent(indent);
*gcursor = 0;
if (gcursor + strlen(linebuf) > &genbuf[LBSIZE - 2])
gcursor = genbuf;
CP(gcursor, linebuf);
} else {
CP(genbuf, gcursor + 1);
gcursor = genbuf;
}
/*
* If we started out as a single line operation and are now
* turning into a multi-line change, then we had better yank
* out dot before it changes so that undo will work
* correctly later.
*/
if (FIXUNDO && vundkind == VCHNG) {
vremote(1, yank, 0);
undap1--;
}
/*
* Now do the append of the new line in the buffer,
* and update the display. If slowopen
* we don't do very much.
*/
vdoappend(genbuf);
vundkind = VMANYINS;
vcline++;
if (state != VISUAL)
vshow(dot, NOLINE);
else {
i += LINE(vcline - 1);
vopen(dot, i);
if (value(vi_SLOWOPEN))
vscrap();
else
vsync1(LINE(vcline));
}
switch (ch) {
case 'r':
break;
case 'a':
if (value(vi_TERSE)) {
vshowmode(gettext("A"));
} else {
vshowmode(gettext("APPEND MODE"));
}
break;
case 's':
if (value(vi_TERSE)) {
vshowmode(gettext("S"));
} else {
vshowmode(gettext("SUBSTITUTE MODE"));
}
break;
case 'c':
if (value(vi_TERSE)) {
vshowmode(gettext("C"));
} else {
vshowmode(gettext("CHANGE MODE"));
}
break;
case 'R':
if (value(vi_TERSE)) {
vshowmode(gettext("R"));
} else {
vshowmode(gettext("REPLACE MODE"));
}
break;
case 'i':
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INSERT MODE"));
}
break;
case 'o':
if (value(vi_TERSE)) {
vshowmode(gettext("O"));
} else {
vshowmode(gettext("OPEN MODE"));
}
break;
default:
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INPUT MODE"));
}
}
strcLIN(gcursor);
*gcursor = 0;
cursor = linebuf;
vgotoCL(nqcolumn(cursor - 1, genbuf));
} /* end for (;;) loop in vappend() */
if (imultlinecnt && gotNL) {
imultlinerep(savecnt, startsrcline, startsrccol, endsrccol);
} else if (omultlinecnt) {
omultlinerep(savecnt, startsrcline, endsrccol);
}
/*
* All done with insertion, position the cursor
* and sync the screen.
*/
hold = oldhold;
if ((imultlinecnt && gotNL) || omultlinecnt) {
fixdisplay();
} else if (cursor > linebuf) {
cursor = lastchr(linebuf, cursor);
}
if (state != HARDOPEN)
vsyncCL();
else if (cursor > linebuf)
back1();
doomed = 0;
wcursor = cursor;
(void) vmove();
}
/*
* XPG6
* To repeat multi-line input for [count]a, [count]A, [count]i, [count]I,
* or a subsequent [count]. :
* insert input count-1 more times.
*/
static void
imultlinerep(int savecnt, line *startsrcline, int startsrccol, int endsrccol)
{
int tmpcnt = 2; /* 1st insert counts as 1 repeat */
line *srcline, *endsrcline;
size_t destsize = LBSIZE - endsrccol - 1;
endsrcline = dot;
/* Save linebuf into temp file before moving off the line. */
vsave();
/*
* At this point the temp file contains the first iteration of
* a multi-line insert, and we need to repeat it savecnt - 1
* more times in the temp file. dot is the last line in the
* first iteration of the insert. Decrement dot so that
* vdoappend() will append each new line before the last line.
*/
--dot;
--vcline;
/*
* Use genbuf to rebuild the last line in the 1st iteration
* of the repeated insert, then copy this line to the temp file.
*/
(void) strlcpy((char *)genbuf, (char *)linebuf, sizeof (genbuf));
getline(*startsrcline);
if (strlcpy((char *)(genbuf + endsrccol + 1),
(char *)(linebuf + startsrccol), destsize) >= destsize) {
error(gettext("Line too long"));
}
vdoappend(genbuf);
vcline++;
/*
* Loop from the second line of the first iteration
* through endsrcline, appending after dot.
*/
++startsrcline;
while (tmpcnt <= savecnt) {
for (srcline = startsrcline; srcline <= endsrcline;
++srcline) {
if ((tmpcnt == savecnt) &&
(srcline == endsrcline)) {
/*
* The last line is already in place,
* just make it the current line.
*/
vcline++;
dot++;
getDOT();
cursor = linebuf + endsrccol;
} else {
getline(*srcline);
/* copy linebuf to temp file */
vdoappend(linebuf);
vcline++;
}
}
++tmpcnt;
}
}
/*
* To repeat input for [count]o, [count]O, or a subsequent [count]. :
* append input count-1 more times to the end of the already added
* text, each time starting on a new line.
*/
static void
omultlinerep(int savecnt, line *startsrcline, int endsrccol)
{
int tmpcnt = 2; /* 1st insert counts as 1 repeat */
line *srcline, *endsrcline;
endsrcline = dot;
/* Save linebuf into temp file before moving off the line. */
vsave();
/*
* Loop from the first line of the first iteration
* through endsrcline, appending after dot.
*/
while (tmpcnt <= savecnt) {
for (srcline = startsrcline; srcline <= endsrcline; ++srcline) {
getline(*srcline);
/* copy linebuf to temp file */
vdoappend(linebuf);
vcline++;
}
++tmpcnt;
}
cursor = linebuf + endsrccol;
}
/*
* Similiar to a ctrl-l, however always vrepaint() in case the last line
* of the repeat would exceed the bottom of the screen.
*/
static void
fixdisplay(void)
{
vclear();
vdirty(0, vcnt);
if (state != VISUAL) {
vclean();
vcnt = 0;
vmoveto(dot, cursor, 0);
} else {
vredraw(WTOP);
vrepaint(cursor);
vfixcurs();
}
}
/*
* Subroutine for vgetline to back up a single character position,
* backwards around end of lines (vgoto can't hack columns which are
* less than 0 in general).
*/
void
back1(void)
{
vgoto(destline - 1, WCOLS + destcol - 1);
}
/*
* Get a line into genbuf after gcursor.
* Cnt limits the number of input characters
* accepted and is used for handling the replace
* single character command. Aescaped is the location
* where we stick a termination indicator (whether we
* ended with an ESCAPE or a newline/return.
*
* We do erase-kill type processing here and also
* are careful about the way we do this so that it is
* repeatable. (I.e. so that your kill doesn't happen,
* when you repeat an insert if it was escaped with \ the
* first time you did it. commch is the command character
* involved, including the prompt for readline.
*/
unsigned char *
vgetline(cnt, gcursor, aescaped, commch)
int cnt;
unsigned char *gcursor;
bool *aescaped;
unsigned char commch;
{
int c, ch;
unsigned char *cp, *pcp;
int x, y, iwhite, backsl=0;
unsigned char *iglobp;
int (*OO)() = Outchar;
int length, width;
unsigned char multic[MULTI_BYTE_MAX+1];
wchar_t wchar = 0;
unsigned char *p;
int len;
/*
* Clear the output state and counters
* for autoindent backwards motion (counts of ^D, etc.)
* Remember how much white space at beginning of line so
* as not to allow backspace over autoindent.
*/
*aescaped = 0;
ogcursor = gcursor;
flusho();
CDCNT = 0;
HADUP = 0;
HADZERO = 0;
gobbled = 0;
iwhite = whitecnt(genbuf);
iglobp = vglobp;
/*
* Clear abbreviation recursive-use count
*/
abbrepcnt = 0;
/*
* Carefully avoid using vinschar in the echo area.
*/
if (splitw)
Outchar = vputchar;
else {
Outchar = vinschar;
vprepins();
}
for (;;) {
length = 0;
backsl = 0;
if (gobblebl)
gobblebl--;
if (cnt != 0) {
cnt--;
if (cnt == 0)
goto vadone;
}
c = getkey();
if (c != ATTN)
c &= 0377;
ch = c;
maphopcnt = 0;
if (vglobp == 0 && Peekkey == 0 && commch != 'r')
while ((ch = map(c, immacs, commch)) != c) {
c = ch;
if (!value(vi_REMAP))
break;
if (++maphopcnt > 256)
error(gettext("Infinite macro loop"));
}
if (!iglobp) {
/*
* Erase-kill type processing.
* Only happens if we were not reading
* from untyped input when we started.
* Map users erase to ^H, kill to -1 for switch.
*/
if (c == tty.c_cc[VERASE])
c = CTRL('h');
else if (c == tty.c_cc[VKILL])
c = -1;
switch (c) {
/*
* ^? Interrupt drops you back to visual
* command mode with an unread interrupt
* still in the input buffer.
*
* ^\ Quit does the same as interrupt.
* If you are a ex command rather than
* a vi command this will drop you
* back to command mode for sure.
*/
case ATTN:
case QUIT:
ungetkey(c);
goto vadone;
/*
* ^H Backs up a character in the input.
*
* BUG: Can't back around line boundaries.
* This is hard because stuff has
* already been saved for repeat.
*/
case CTRL('h'):
bakchar:
cp = lastchr(ogcursor, gcursor);
if (cp < ogcursor) {
if (splitw) {
/*
* Backspacing over readecho
* prompt. Pretend delete but
* don't beep.
*/
ungetkey(c);
goto vadone;
}
(void) beep();
continue;
}
goto vbackup;
/*
* ^W Back up a white/non-white word.
*/
case CTRL('w'):
wdkind = 1;
for (cp = gcursor; cp > ogcursor && isspace(cp[-1]); cp--)
continue;
pcp = lastchr(ogcursor, cp);
for (c = wordch(pcp);
cp > ogcursor && wordof(c, pcp); cp = pcp, pcp = lastchr(ogcursor, cp))
continue;
goto vbackup;
/*
* users kill Kill input on this line, back to
* the autoindent.
*/
case -1:
cp = ogcursor;
vbackup:
if (cp == gcursor) {
(void) beep();
continue;
}
endim();
*cp = 0;
c = cindent();
vgotoCL(nqcolumn(lastchr(linebuf, cursor), genbuf));
if (doomed >= 0)
doomed += c - cindent();
gcursor = cp;
continue;
/*
* \ Followed by erase or kill
* maps to just the erase or kill.
*/
case '\\':
x = destcol, y = destline;
putchar('\\');
vcsync();
c = getkey();
if (c == tty.c_cc[VERASE]
|| c == tty.c_cc[VKILL])
{
vgoto(y, x);
if (doomed >= 0)
doomed++;
multic[0] = wchar = c;
length = 1;
goto def;
}
ungetkey(c), c = '\\';
backsl = 1;
break;
/*
* ^Q Super quote following character
* Only ^@ is verboten (trapped at
* a lower level) and \n forces a line
* split so doesn't really go in.
*
* ^V Synonym for ^Q
*/
case CTRL('q'):
case CTRL('v'):
x = destcol, y = destline;
putchar('^');
vgoto(y, x);
c = getkey();
#ifdef USG
if (c == ATTN)
c = tty.c_cc[VINTR];
#endif
if (c != NL) {
if (doomed >= 0)
doomed++;
multic[0] = wchar = c;
length = 1;
goto def;
}
break;
}
}
/*
* If we get a blank not in the echo area
* consider splitting the window in the wrapmargin.
*/
if(!backsl) {
ungetkey(c);
if((length = _mbftowc((char *)multic, &wchar, getkey, &Peekkey)) <= 0) {
(void) beep();
continue;
}
} else {
length = 1;
multic[0] = '\\';
}
if (c != NL && !splitw) {
if (c == ' ' && gobblebl) {
gobbled = 1;
continue;
}
if ((width = wcwidth(wchar)) <= 0)
width = (wchar <= 0177 ? 1 : 4);
if (value(vi_WRAPMARGIN) &&
(outcol + width - 1 >= OCOLUMNS - value(vi_WRAPMARGIN) ||
backsl && outcol==0) &&
commch != 'r') {
/*
* At end of word and hit wrapmargin.
* Move the word to next line and keep going.
*/
unsigned char *wp;
int bytelength;
#ifndef PRESUNEUC
unsigned char *tgcursor;
wchar_t wc1, wc2;
tgcursor = gcursor;
#endif /* PRESUNEUC */
wdkind = 1;
strncpy(gcursor, multic, length);
gcursor += length;
if (backsl) {
#ifdef PRESUNEUC
if((length = mbftowc((char *)multic, &wchar, getkey, &Peekkey)) <= 0) {
#else
if((length = _mbftowc((char *)multic, &wchar, getkey, &Peekkey)) <= 0) {
#endif /* PRESUNEUC */
(void) beep();
continue;
}
strncpy(gcursor, multic, length);
gcursor += length;
}
*gcursor = 0;
/*
* Find end of previous word if we are past it.
*/
for (cp=gcursor; cp>ogcursor && isspace(cp[-1]); cp--)
;
#ifdef PRESUNEUC
/* find screen width of previous word */
width = 0;
for(wp = cp; *wp; )
#else
/* count screen width of pending characters */
width = 0;
for(wp = tgcursor; wp < cp;)
#endif /* PRESUNEUC */
if((bytelength = mbtowc(&wchar, (char *)wp, MULTI_BYTE_MAX)) < 0) {
width+=4;
wp++;
} else {
int curwidth = wcwidth(wchar);
if(curwidth <= 0)
width += (*wp < 0200 ? 2 : 4);
else
width += curwidth;
wp += bytelength;
}
#ifdef PRESUNEUC
if (outcol+(backsl?OCOLUMNS:0) - width >= OCOLUMNS - value(vi_WRAPMARGIN)) {
#else
if (outcol+(backsl?OCOLUMNS:0) + width -1 >= OCOLUMNS - value(vi_WRAPMARGIN)) {
#endif /* PRESUNEUC */
/*
* Find beginning of previous word.
*/
#ifdef PRESUNEUC
for (; cp>ogcursor && !isspace(cp[-1]); cp--)
;
#else
wc1 = wc2 = 0;
while (cp>ogcursor) {
if (isspace(cp[-1])) {
break;
}
if (!multibyte) {
cp--;
continue;
}
wp = (unsigned char *)(cp -
MB_CUR_MAX);
if (wp < ogcursor)
wp = ogcursor;
while (cp > wp) {
/* 7tabs */if (wc2) {
/* 7tabs */ if ((bytelength = mbtowc(&wc1, (char *)wp, cp-wp)) != cp-wp) {
/* 7tabs */ wp++;
/* 7tabs */ wc1 = 0;
/* 7tabs */ continue;
/* 7tabs */ }
/* 7tabs */} else {
/* 7tabs */ if ((bytelength = mbtowc(&wc2, (char *)wp, cp-wp)) != cp-wp) {
/* 7tabs */ wp++;
/* 7tabs */ wc2 = 0;
/* 7tabs */ continue;
/* 7tabs */ }
/* 7tabs */}
/* 7tabs */if (wc1) {
/* 7tabs */ if (wdbdg && (!iswascii(wc1) || !iswascii(wc2))) {
/* 7tabs */ if ((*wdbdg)(wc1, wc2, 2) < 5) {
/* 7tabs */ goto ws;
/* 7tabs */ }
/* 7tabs */ }
/* 7tabs */ wc2 = wc1;
/* 7tabs */ wc1 = 0;
/* 7tabs */ cp -= bytelength - 1;
/* 7tabs */ break;
/* 7tabs */} else {
/* 7tabs */ cp -= bytelength - 1;
/* 7tabs */ break;
/* 7tabs */}
}
cp--;
}
ws:
#endif /* PRESUNEUC */
if (cp <= ogcursor) {
/*
* There is a single word that
* is too long to fit. Just
* let it pass, but beep for
* each new letter to warn
* the luser.
*/
gcursor -= length;
c = *gcursor;
*gcursor = 0;
(void) beep();
goto dontbreak;
}
/*
* Save it for next line.
*/
macpush(cp, 0);
#ifdef PRESUNEUC
cp--;
#endif /* PRESUNEUC */
}
macpush("\n", 0);
/*
* Erase white space before the word.
*/
while (cp > ogcursor && isspace(cp[-1]))
cp--; /* skip blank */
gobblebl = 3;
goto vbackup;
}
dontbreak:;
}
/*
* Word abbreviation mode.
*/
if (anyabbrs && gcursor > ogcursor && !wordch(multic) && wordch(lastchr(ogcursor, gcursor))) {
int wdtype, abno;
multic[length] = 0;
wdkind = 1;
cp = lastchr(ogcursor, gcursor);
pcp = lastchr(ogcursor, cp);
for (wdtype = wordch(pcp);
cp > ogcursor && wordof(wdtype, pcp); cp = pcp, pcp = lastchr(ogcursor, pcp))
;
*gcursor = 0;
for (abno=0; abbrevs[abno].mapto; abno++) {
if (eq(cp, abbrevs[abno].cap)) {
if(abbrepcnt == 0) {
if(reccnt(abbrevs[abno].cap, abbrevs[abno].mapto))
abbrepcnt = 1;
macpush(multic, 0);
macpush(abbrevs[abno].mapto);
goto vbackup;
} else
abbrepcnt = 0;
}
}
}
switch (c) {
/*
* ^M Except in repeat maps to \n.
*/
case CR:
if (vglobp) {
multic[0] = wchar = c;
length = 1;
goto def;
}
c = '\n';
/* presto chango ... */
/*
* \n Start new line.
*/
case NL:
*aescaped = c;
goto vadone;
/*
* escape End insert unless repeat and more to repeat.
*/
case ESCAPE:
if (lastvgk) {
multic[0] = wchar = c;
length = 1;
goto def;
}
goto vadone;
/*
* ^D Backtab.
* ^T Software forward tab.
*
* Unless in repeat where this means these
* were superquoted in.
*/
case CTRL('t'):
if (vglobp) {
multic[0] = wchar = c;
length = 1;
goto def;
}
/* fall into ... */
*gcursor = 0;
cp = vpastwh(genbuf);
c = whitecnt(genbuf);
if (ch == CTRL('t')) {
/*
* ^t just generates new indent replacing
* current white space rounded up to soft
* tab stop increment.
*/
if (cp != gcursor)
/*
* BUG: Don't hack ^T except
* right after initial
* white space.
*/
continue;
cp = genindent(iwhite = backtab(c + value(vi_SHIFTWIDTH) + 1));
ogcursor = cp;
goto vbackup;
}
/*
* ^D works only if we are at the (end of) the
* generated autoindent. We count the ^D for repeat
* purposes.
*/
case CTRL('d'):
/* check if ^d was superquoted in */
if(vglobp && inscdcnt <= 0) {
multic[0] = wchar = c;
length = 1;
goto def;
}
if(vglobp)
inscdcnt--;
*gcursor = 0;
cp = vpastwh(genbuf);
c = whitecnt(genbuf);
if (c == iwhite && c != 0)
if (cp == gcursor) {
iwhite = backtab(c);
CDCNT++;
ogcursor = cp = genindent(iwhite);
goto vbackup;
} else if (&cp[1] == gcursor &&
(*cp == '^' || *cp == '0')) {
/*
* ^^D moves to margin, then back
* to current indent on next line.
*
* 0^D moves to margin and then
* stays there.
*/
HADZERO = *cp == '0';
ogcursor = cp = genbuf;
HADUP = 1 - HADZERO;
CDCNT = 1;
endim();
back1();
(void) vputchar(' ');
goto vbackup;
}
if (vglobp && vglobp - iglobp >= 2) {
if ((p = vglobp - MB_CUR_MAX) < iglobp)
p = iglobp;
for ( ; p < &vglobp[-2]; p += len) {
if ((len = mblen((char *)p, MB_CUR_MAX)) <= 0)
len = 1;
}
if ((p == &vglobp[-2]) &&
(*p == '^' || *p == '0') &&
gcursor == ogcursor + 1)
goto bakchar;
}
continue;
default:
/*
* Possibly discard control inputs.
*/
if (!vglobp && junk(c)) {
(void) beep();
continue;
}
def:
if (!backsl) {
putchar(wchar);
flush();
}
if (gcursor + length - 1 > &genbuf[LBSIZE - 2])
error(gettext("Line too long"));
(void)strncpy(gcursor, multic, length);
gcursor += length;
vcsync();
if (value(vi_SHOWMATCH) && !iglobp)
if (c == ')' || c == '}')
lsmatch(gcursor);
continue;
}
}
vadone:
*gcursor = 0;
if (Outchar != termchar)
Outchar = OO;
endim();
return (gcursor);
}
int vgetsplit();
unsigned char *vsplitpt;
/*
* Append the line in buffer at lp
* to the buffer after dot.
*/
void
vdoappend(unsigned char *lp)
{
int oing = inglobal;
vsplitpt = lp;
inglobal = 1;
(void)append(vgetsplit, dot);
inglobal = oing;
}
/*
* Subroutine for vdoappend to pass to append.
*/
int
vgetsplit(void)
{
if (vsplitpt == 0)
return (EOF);
strcLIN(vsplitpt);
vsplitpt = 0;
return (0);
}
/*
* Vmaxrep determines the maximum repetition factor
* allowed that will yield total line length less than
* LBSIZE characters and also does hacks for the R command.
*/
int
vmaxrep(unsigned char ch, int cnt)
{
int len;
unsigned char *cp;
int repcnt, oldcnt, replen;
if (cnt > LBSIZE - 2)
cnt = LBSIZE - 2;
if (ch == 'R') {
len = strlen(cursor);
oldcnt = 0;
for(cp = cursor; *cp; ) {
oldcnt++;
cp = nextchr(cp);
}
repcnt = 0;
for(cp = genbuf; *cp; ) {
repcnt++;
cp = nextchr(cp);
}
/*
* if number of characters in replacement string
* (repcnt) is less than number of characters following
* cursor (oldcnt), find end of repcnt
* characters after cursor
*/
if(repcnt < oldcnt) {
for(cp = cursor; repcnt > 0; repcnt--)
cp = nextchr(cp);
len = cp - cursor;
}
CP(cursor, cursor + len);
vUD2 += len;
}
len = strlen(linebuf);
replen = strlen(genbuf);
if (len + cnt * replen <= LBSIZE - 2)
return (cnt);
cnt = (LBSIZE - 2 - len) / replen;
if (cnt == 0) {
vsave();
error(gettext("Line too long"));
}
return (cnt);
}
/*
* Determine how many occurrences of word 'CAP' are in 'MAPTO'. To be
* considered an occurrence there must be both a nonword-prefix, a
* complete match of 'CAP' within 'MAPTO', and a nonword-suffix.
* Note that the beginning and end of 'MAPTO' are considered to be
* valid nonword delimiters.
*/
int
reccnt(unsigned char *cap, unsigned char *mapto)
{
int i, cnt, final;
cnt = 0;
final = strlen(mapto) - strlen(cap);
for (i=0; i <= final; i++)
if ((strncmp(cap, mapto+i, strlen(cap)) == 0) /* match */
&& (i == 0 || !wordch(&mapto[i-1])) /* prefix ok */
&& (i == final || !wordch(&mapto[i+strlen(cap)]))) /* suffix ok */
cnt++;
return (cnt);
}