Cross Reference: /illumos-gate/usr/src/cmd/svc/milestone/fs-usr

	fs-usr revision 29db47666d29a4a75b70ccae6721ddc072bb5c43
#!/sbin/sh
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T.
# All rights reserved.
#
#
. /lib/svc/share/smf_include.sh
. /lib/svc/share/fs_include.sh

UPDATEFILE=/etc/svc/volatile/boot_archive_needs_update

#
# Once root is read/write we can enable the dedicated dumpdevice if it exists
# locally. This is an optimization as svc-dumpadm will attempt do this later.
#
dump_setup()
{
    [ -r /etc/dumpadm.conf ] && . /etc/dumpadm.conf

    readswapdev $DUMPADM_DEVICE < $vfstab

    #
    # Make sure that the dump save area has been configured before
    # proceeding. If the variable has not been defined or does not exist
    # then bail out early. This will prevent us from configuring a
    # dump save area before a hostname has been configured (i.e after
    # sys-unconfig has been invoked).
    #
    [ -z "$DUMPADM_SAVDIR" ] && return

    #
    # If we have a dedicated dump device, then go ahead and configure it.
    #
    if [ "x$special" != "x$DUMPADM_DEVICE" ]; then
        if [ -x /usr/sbin/dumpadm -a -b $DUMPADM_DEVICE ]; then
            /usr/sbin/dumpadm -u || exit $SMF_EXIT_ERR_CONFIG
        fi
    fi
}

rootiszfs=0
# get the fstype of root
readmnttab / </etc/mnttab
if [ "$fstype" = zfs ] ; then
    rootiszfs=1
    dump_setup
fi

#
# Add physical swap.
#
/sbin/swapadd -1

#
# Check and remount the / (root) file system.
# For NFS mounts, force the llock option on.
#
if smf_is_globalzone && [ $rootiszfs = 0 ]; then
    readvfstab / < $vfstab
    checkfs $fsckdev $fstype $mountp || exit $SMF_EXIT_ERR_FATAL
    checkopt "llock" $mntopts
    mntopts='remount'

    [ -n "$otherops" ] && mntopts="${mntopts},${otherops}"
    [ "$fstype" = nfs ] && mntopts="${mntopts},llock"

    # if root dev is a read-only metadevice then fail
    case $special in
    /dev/md/dsk/*)
        dd if=/dev/null of=$special count=0 >/dev/null 2>&1 ||
            exit $SMF_EXIT_ERR_FATAL
        ;;
    esac

    mountfs -m $mountp $fstype $mntopts - || exit $SMF_EXIT_ERR_FATAL
fi

#
# Check and remount the /usr file system (formerly mounted read-only).
# Unless root is zfs, in which case we've already mounted /usr read-write
#
if [ "$rootiszfs" = 0 ] ; then
    readvfstab /usr < $vfstab
    if [ "$mountp" ]; then
        if [ "$fstype" = cachefs ]; then
            mountfs -O $mountp cachefs $mntopts $special ||
                exit $SMF_EXIT_ERR_FATAL
        else
            checkopt ro $mntopts
            if [ "x$option" != xro ]; then
                checkfs $fsckdev $fstype $mountp ||
                    exit $SMF_EXIT_ERR_FATAL
                if [ "x$mntopts" != x- ]; then
                    mntopts="remount,$mntopts"
                else
                    mntopts="remount"
                fi

                # if usr dev is a read-only metadevice then fail
                case $special in
                /dev/md/dsk/*)
                    dd if=/dev/null of=$special count=0 \
                        >/dev/null 2>&1 || exit $SMF_EXIT_ERR_FATAL
                    ;;
                esac

                mountfs - /usr $fstype $mntopts - ||
                    exit $SMF_EXIT_ERR_FATAL
            fi
        fi
    fi
fi

#
# Check and mount the /usr/platform file system.  This should only be
# present when a SunOS 5.5 (Solaris 2.5) or greater client is being
# administered by a SunOS 5.4 or less host.
#
readvfstab /usr/platform < $vfstab
if [ "$mountp" ]; then
    checkfs $fsckdev $fstype $mountp || exit $SMF_EXIT_ERR_FATAL
    mountfs - $mountp $fstype $mntopts - || exit $SMF_EXIT_ERR_FATAL
fi

#
# Mount the fd file systems if mount point exists.
#
readvfstab /dev/fd < $vfstab
if [ "$mountp" -a -d /dev/fd ]; then
    mountfs - /dev/fd - - - || exit $SMF_EXIT_ERR_FATAL
fi

if [ -f "${UPDATEFILE}" ]; then
    /usr/sbin/bootadm update-archive
    if [ $? != 0 ]; then
        cecho ""
        cecho "WARNING: Automatic update of the boot archive failed."
        cecho "Update the archives using 'bootadm update-archive'"
        cecho "command and then reboot the system from the same device that"
        cecho "was previously booted."
        cecho ""
        exit $SMF_EXIT_ERR_FATAL
    fi
    rm -f $UPDATEFILE
    bootcmd=`/usr/sbin/eeprom bootcmd | /usr/bin/sed -e 's#bootcmd=##g'`
    if [ `uname -p` = "i386" ]; then
        /usr/sbin/reboot -f dryrun
        if [ $? = 0 ]; then
            /usr/sbin/reboot -f -- "$bootcmd"
            exit $SMF_EXIT_OK
        fi
        boot_prop=`/usr/sbin/svccfg -s svc:/system/boot-config:default listprop config/trust-bios-boot-device | \
            /usr/bin/nawk '{ print $3}'`
        if [ "$boot_prop" != "true" ]; then
            cecho ""
            cecho "WARNING: Reboot required."
            cecho "The system has updated the cache of files (boot archive) that is used"
            cecho "during the early boot sequence. To avoid booting and running the system"
            cecho "with the previously out-of-sync version of these files, reboot the"
            cecho "system from the same device that was previously booted."
            cecho ""
            exit $SMF_EXIT_ERR_FATAL
        else
            /usr/sbin/reboot -p
            exit $SMF_EXIT_OK
        fi
    fi
    /usr/sbin/reboot -- "$bootcmd"
fi

exit $SMF_EXIT_OK