daktari/psvcpolicy/psvcpolicy.c

	psvcpolicy.c revision 298b7f4ca426d69789dddfabc7fd2863cf7a0ea4
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident   "%Z%%M% %I% %E% SMI"

/*
 * Daktari platform platform specific environment monitoring policies
 */
#include    <poll.h>
#include    <syslog.h>
#include    <unistd.h>
#include    <stdio.h>
#include    <stdlib.h>
#include    <errno.h>
#include    <fcntl.h>
#include    <strings.h>
#include    <libintl.h>
#include    <sys/types.h>
#include    <sys/param.h>
#include    <config_admin.h>
#include    <libdevice.h>
#include    <picl.h>
#include    <picltree.h>
#include    <psvc_objects.h>
#include    <sys/i2c/clients/i2c_client.h>
#include    <sys/daktari.h>
#include    <sys/hpc3130_events.h>
#include    <assert.h>
#include    <limits.h>
#include    <sys/systeminfo.h>

/*LINTLIBRARY*/

/* resides in libcfgadm */
extern cfga_err_t config_change_state(cfga_cmd_t, int, char *const *,
    const char *, struct cfga_confirm *, struct cfga_msg *, char **,
    cfga_flags_t);
/* Local Routine */
static int32_t update_gen_fault_led(psvc_opaque_t, char *);
static void shutdown_routine(void);
static int32_t update_thresholds(psvc_opaque_t hdlp, char *id, int offset);


#ifdef DEBUG

static int dak_policy_debug = 0;

#define D1SYS_ERR(ARGS) if (dak_policy_debug & 0x1) syslog ARGS;
#define D2SYS_ERR(ARGS) if (dak_policy_debug & 0x2) syslog ARGS;

#else

#define D1SYS_ERR(ARGS)
#define D2SYS_ERR(ARGS)

#endif

#define I2C_PATH    "/devices/pci@9,700000/ebus@1/i2c@1,30"
#define I2C_NODE    I2C_PATH ":devctl"
#define PCF8574     I2C_PATH "/ioexp@0,%x:pcf8574"
#define PCF8591     I2C_PATH "/adio@0,%x:port_0"
#define FRU     I2C_PATH "/fru@0,%x:fru"
#define HPC3130_DEV I2C_PATH "/hotplug-controller@0,%2x:port_%1x"
#define GEN_FAULT_LED   "FSP_GEN_FAULT_LED"
#define EMPTY_STRING    "EMPTY"
#define DEVICE_FAILURE_MSG  gettext("WARNING: Device %s failure detected")
#define DEVICE_INSERTED_MSG gettext("Device %s inserted")
#define DEVICE_REMOVED_MSG  gettext("Device %s removed")
#define PS_UNPLUGGED_MSG    gettext("Device %s unplugged")
#define PS_PLUGGED_MSG      gettext("Device %s Plugged in")
#define DEVICE_OK_MSG       gettext("Device %s OK")
#define SET_LED_FAILED_MSG      \
    gettext("Failed to set LED state, id = %s, errno = %d\n")
#define GET_PRESENCE_FAILED_MSG     \
    gettext("Failed to get presence attribute, id = %s, errno = %d\n")
#define GET_SENSOR_FAILED_MSG       \
    gettext("Failed to get sensor value, id = %s, errno = %d\n")
#define ADD_PS_MSG          \
gettext("WARNING: Only 1 Power Supply in system. ADD a 2nd Power Supply.\n")
#define REMOVE_LOAD_MSG         \
    gettext("WARNING: Power Supply at 95%% current. Remove some load.\n")
#define PS_OVER_CURRENT_MSG     \
    gettext("WARNING: Power Supply overcurrent detected\n")
#define DEVICE_UNKNOWN_MSG  gettext("Unknown device %s instance %d\n")
#define DEVICE_HANDLE_FAIL_MSG      \
    gettext("Failed to get device handle for %s, errno = %d\n")
#define DEVTREE_NODE_CREATE_FAILED  \
    gettext("psvc PICL plugin: Failed to create node for %s, errno = %d")
#define DEVTREE_NODE_DELETE_FAILED  \
    gettext("psvc PICL plugin: Failed to delete node for %s, errno = %d")
#define DISK_FAULT_MSG      gettext("%s: Error Reported\n")
#define DISK_OK_MSG     gettext("%s: Error Cleared\n")
#define SET_FANSPEED_FAILED_MSG     \
    gettext("Failed to set fan speed, id = %s, errno = %d\n")
#define GET_ATTR_FRU_FAILED_MSG gettext("Failed psvc_get_attr for FRU info\n")
#define NO_FRU_INFO_MSG         \
    gettext("No FRU Information for %s using default module card\n")

#define DAKTARI_MAX_PS  3
#define DAK_MAX_PS_I_SENSORS 4
#define DAK_MAX_DISKS   12
#define DAK_MAX_CPU_MOD 4
#define DAK_MAX_FAULT_SENSORS 3
#define DAK_MAX_FANS 10

static int co_ps = 0;
static char *shutdown_string = "shutdown -y -g 60 -i 5 \"OVERTEMP condition\"";

typedef struct i2c_hp {
    int32_t     addr[2];
    char        name[256];
    char        compatible[256];
} i2c_hp_t;

typedef struct seg_desc {
    int32_t segdesc;
    int16_t segoffset;
    int16_t seglength;
} seg_desc_t;

static int32_t threshold_names[] = {
    PSVC_HW_LO_SHUT_ATTR,
    PSVC_LO_SHUT_ATTR,
    PSVC_LO_WARN_ATTR,
    PSVC_NOT_USED,          /* LOW MODE which is not used */
    PSVC_OPTIMAL_TEMP_ATTR,
    PSVC_HI_WARN_ATTR,
    PSVC_HI_SHUT_ATTR,
    PSVC_HW_HI_SHUT_ATTR
};

/*
 * The I2C bus is noisy, and the state may be incorrectly reported as
 * having changed.  When the state changes, we attempt to confirm by
 * retrying.  If any retries indicate that the state has not changed, we
 * assume the state change(s) were incorrect and the state has not changed.
 * The following variables are used to store the tuneable values read in
 * from the optional i2cparam.conf file for this shared object library.
 */
static int n_retry_pshp_status = PSVC_NUM_OF_RETRIES;
static int retry_sleep_pshp_status = 1;
static int n_read_overcurrent = PSVC_THRESHOLD_COUNTER;
static int n_retry_devicefail = PSVC_NUM_OF_RETRIES;
static int retry_sleep_devicefail = 1;
static int n_read_fanfault = PSVC_THRESHOLD_COUNTER;
static int n_retry_pshp = PSVC_NUM_OF_RETRIES;
static int retry_sleep_pshp = 1;
static int n_retry_diskfault = PSVC_NUM_OF_RETRIES;
static int retry_sleep_diskfault = 1;
static int n_retry_temp_shutdown = PSVC_NUM_OF_RETRIES;
static int retry_sleep_temp_shutdown = 1;

typedef struct {
    int *pvar;
    char *texttag;
} i2c_noise_param_t;

static i2c_noise_param_t i2cparams[] = {
    &n_retry_pshp_status, "n_retry_pshp_status",
    &retry_sleep_pshp_status, "retry_sleep_pshp_status",
    &n_read_overcurrent, "n_read_overcurrent",
    &n_retry_devicefail, "n_retry_devicefail",
    &retry_sleep_devicefail, "retry_sleep_devicefail",
    &n_read_fanfault, "n_read_fanfault",
    &n_retry_pshp, "n_retry_pshp",
    &retry_sleep_pshp, "retry_sleep_pshp",
    &n_retry_diskfault, "n_retry_diskfault",
    &retry_sleep_diskfault, "retry_sleep_diskfault",
    &n_retry_temp_shutdown, "n_retry_temp_shutdown",
    &retry_sleep_temp_shutdown, "retry_sleep_temp_shutdown",
    NULL, NULL
};

#pragma init(i2cparams_load)

static void
i2cparams_debug(i2c_noise_param_t *pi2cparams, char *platform,
    int usingDefaults)
{
    char s[128];
    i2c_noise_param_t *p;

    if (!usingDefaults) {
        (void) snprintf(s, sizeof (s),
            "# Values from /usr/platform/%s/lib/i2cparam.conf\n",
            platform);
        syslog(LOG_WARNING, "%s", s);
    } else {
        /* no file - we're using the defaults */
        (void) snprintf(s, sizeof (s),
"# No /usr/platform/%s/lib/i2cparam.conf file, using defaults\n",
            platform);
    }
    (void) fputs(s, stdout);
    p = pi2cparams;
    while (p->pvar != NULL) {
        (void) snprintf(s, sizeof (s), "%s %d\n", p->texttag,
            *(p->pvar));
        if (!usingDefaults)
            syslog(LOG_WARNING, "%s", s);
        (void) fputs(s, stdout);
        p++;
    }
}

static void
i2cparams_load(void)
{
    FILE *fp;
    char filename[PATH_MAX];
    char platform[64];
    char s[128];
    char var[128];
    int val;
    i2c_noise_param_t *p;

    if (sysinfo(SI_PLATFORM, platform, sizeof (platform)) == -1) {
        syslog(LOG_ERR, "sysinfo error %s\n", strerror(errno));
        return;
    }
    (void) snprintf(filename, sizeof (filename),
        "/usr/platform/%s/lib/i2cparam.conf", platform);
    /* read thru the i2cparam.conf file and set variables */
    if ((fp = fopen(filename, "r")) != NULL) {
        while (fgets(s, sizeof (s), fp) != NULL) {
            if (s[0] == '#') /* skip comment lines */
                continue;
            /* try to find a string match and get the value */
            if (sscanf(s, "%127s %d", var, &val) != 2)
                continue;
            if (val < 1)
                val = 1;  /* clamp min value */
            p = &(i2cparams[0]);
            while (p->pvar != NULL) {
                if (strncmp(p->texttag, var, sizeof (var)) ==
                    0) {
                    *(p->pvar) = val;
                    break;
                }
                p++;
            }
        }
        (void) fclose(fp);
    }
    /* output the values of the parameters */
    i2cparams_debug(&(i2cparams[0]), platform, ((fp == NULL)? 1 : 0));
}

int32_t
psvc_MB_update_thresholds_0(psvc_opaque_t hdlp, char *id, int offset)
{
    int IO_offset = 0xd;
    int32_t err;

    err = update_thresholds(hdlp, id, IO_offset);

    return (err);
}

int32_t
psvc_IO_update_thresholds_0(psvc_opaque_t hdlp, char *id, int offset)
{
    int IO_offset = 0x8;
    int32_t err;

    err = update_thresholds(hdlp, id, IO_offset);

    return (err);
}

int32_t
psvc_DBP_update_thresholds_0(psvc_opaque_t hdlp, char *id, int offset)
{
    int IO_offset = 0x7;
    int32_t err;

    err = update_thresholds(hdlp, id, IO_offset);

    return (err);
}

/*
 * used to determine if a change of state occured. valid when states
 * are strings.
 */
static int8_t
change_of_state_str(char *state1, char *check1, char *state2, char *check2)
{
    int change = 0;

    if ((strcmp(state1, check1) == 0) && (strcmp(state2, check2) != 0))
        change = 1;
    if ((strcmp(state1, check1) != 0) && (strcmp(state2, check2) == 0))
        change = 1;

    return (change);
}

/*
 * Update thresholds tries to read the temperature thresholds from the FRU
 * SEEproms and then updates the thresholds in the object by overriding the
 * hardcoded thresholds.  For Daktari it is an Error if the FRU does not
 * contain the segment that had the temperature thresholds.
 */
static int32_t
update_thresholds(psvc_opaque_t hdlp, char *id, int offset)
{
    int32_t status = PSVC_SUCCESS;
    fru_info_t fru_data;
    char *fru, seg_name[2];
    int8_t seg_count, temp_array[8];
    int32_t match_count, i, j, seg_desc_start = 0x1806, temp_address;
    int32_t seg_found, temp;
    boolean_t present;
    seg_desc_t segment;

    status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &present);
    if ((status != PSVC_SUCCESS) || (present != PSVC_PRESENT))
        return (status);

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR, &match_count,
        PSVC_FRU);
    if (status == PSVC_FAILURE)
        return (status);

    for (i = 0; i < match_count; i++) {
        seg_found = 0;
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &fru, PSVC_FRU, i);
        if (status != PSVC_SUCCESS)
            return (status);

        fru_data.buf_start = 0x1805;
        fru_data.buf = (char *)&seg_count;
        fru_data.read_size = 1;

        status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
            &fru_data);
        if (status != PSVC_SUCCESS) {
            return (status);
        }
        for (j = 0; (j < seg_count) && (!seg_found); j++) {
            fru_data.buf_start = seg_desc_start;
            fru_data.buf = seg_name;
            fru_data.read_size = 2;

            status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
                &fru_data);

            seg_desc_start = seg_desc_start + 2;
            fru_data.buf_start = seg_desc_start;
            fru_data.buf = (char *)&segment;
            fru_data.read_size = sizeof (seg_desc_t);

            status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
                &fru_data);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR,
                    "Failed psvc_get_attr for FRU info\n");
                return (status);
            }
            seg_desc_start = seg_desc_start + sizeof (seg_desc_t);
            if (memcmp(seg_name, "SC", 2) == 0)
                seg_found = 1;
        }
        if (seg_found) {
            temp_address = segment.segoffset + offset;
            fru_data.buf_start = temp_address;
            fru_data.buf = (char *)&temp_array;
            fru_data.read_size = sizeof (temp_array);
            status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
                &fru_data);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR,
                    "Failed psvc_get_attr for FRU info\n");
                return (status);
            } else {
                for (j = 0; j < sizeof (temp_array); j++) {
                    if (threshold_names[j] ==
                        PSVC_NOT_USED)
                        continue;
                    temp = temp_array[j];
                    status = psvc_set_attr(hdlp, id,
                        threshold_names[j], &temp);
                    if (status != PSVC_SUCCESS) {
                        return (status);
                    }
                }
            }
        } else {
            syslog(LOG_ERR, "No FRU Information for %s"
                " using default temperatures\n", id);
        }
    }
    return (status);
}

int32_t
psvc_fan_init_speed_0(psvc_opaque_t hdlp, char *id)
{
    int32_t status = PSVC_SUCCESS;
    boolean_t present;
    char *control_id;
    int32_t init_speed = 0;

    status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &present);
    if ((status != PSVC_SUCCESS) || (present != PSVC_PRESENT))
        return (status);

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR, &control_id,
        PSVC_FAN_DRIVE_CONTROL, 0);
    if (status != PSVC_SUCCESS)
        return (status);

    status = psvc_set_attr(hdlp, control_id, PSVC_CONTROL_VALUE_ATTR,
        &init_speed);
    if (status == PSVC_FAILURE) {
        syslog(LOG_ERR, SET_FANSPEED_FAILED_MSG, control_id, errno);
        return (status);
    }

    return (status);
}

int32_t
psvc_update_setpoint_0(psvc_opaque_t hdlp, char *id)
{
    int32_t status = PSVC_SUCCESS;
    char *temp_sensor;
    int32_t match_count, i, temp;
    int16_t lowest_temp = 500;
    boolean_t present;

    status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &present);
    if ((status != PSVC_SUCCESS) || (present != PSVC_PRESENT))
        return (status);

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR, &match_count,
        PSVC_DEV_TEMP_SENSOR);
    if (status == PSVC_FAILURE)
        return (status);

    for (i = 0; i < match_count; i++) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &temp_sensor, PSVC_DEV_TEMP_SENSOR, i);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_get_attr(hdlp, temp_sensor,
            PSVC_OPTIMAL_TEMP_ATTR, &temp);
        if (status != PSVC_SUCCESS) {
            syslog(LOG_ERR, "Failed to get Optimal temp for %s\n",
                temp_sensor);
            return (status);
        }
        if (temp < lowest_temp)
            lowest_temp = temp;
    }
    status = psvc_set_attr(hdlp, id, PSVC_SETPOINT_ATTR, &lowest_temp);
    if (status == PSVC_FAILURE) {
        syslog(LOG_ERR, "Failed to change setpoint for %s\n", id);
        return (status);
    }
    return (status);
}

int32_t
psvc_remove_missing_nodes_0(psvc_opaque_t hdlp, char *id)
{
    int32_t status = PSVC_SUCCESS;
    char state[32];
    char *physical_dev;
    int32_t i, device_count;
    char parent_path[256];
    picl_nodehdl_t child_node;
    boolean_t present;

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR,
        &device_count, PSVC_PHYSICAL_DEVICE);
    if (status == PSVC_FAILURE)
        return (status);

    for (i = 0; i < device_count; i++) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &physical_dev, PSVC_PHYSICAL_DEVICE, i);
        if (status != PSVC_SUCCESS)
            return (status);
        if (strncmp(physical_dev, "LTC1427", 7) == 0)
            continue;
        status = psvc_get_attr(hdlp, physical_dev,
            PSVC_PROBE_RESULT_ATTR, state);
        if (status != PSVC_SUCCESS)
            continue;
        status = psvc_get_attr(hdlp, physical_dev, PSVC_PRESENCE_ATTR,
            &present);
        if (status == PSVC_FAILURE) {
            syslog(LOG_ERR, GET_PRESENCE_FAILED_MSG, physical_dev,
                errno);
            return (status);
        }

        if ((strcmp(state, PSVC_ERROR) == 0) &&
            (present == PSVC_PRESENT)) {
            /* convert name to node, and parent path */
            psvcplugin_lookup(physical_dev, parent_path,
                &child_node);
            /* Device removed */
            ptree_delete_node(child_node);
        }
    }
    return (status);
}

int32_t
psvc_check_ps_hotplug_status_0(psvc_opaque_t hdlp, char *id)
{
    char        fail_valid_switch_id[PICL_PROPNAMELEN_MAX];
    int32_t     status = PSVC_SUCCESS;
    char        valid_switch_state[32];
    char        state[32], fault[32];
    int32_t     led_count, j;
    char        *led_id;
    char        led_state[32];
    boolean_t   present;
    static int8_t   hotplug_failed_count = 0;
    int retry;

    status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &present);
    if (status == PSVC_FAILURE) {
        syslog(LOG_ERR, GET_PRESENCE_FAILED_MSG, id, errno);
        return (status);
    }

    if (present == PSVC_ABSENT) {
        errno = ENODEV;
        return (PSVC_FAILURE);
    }

    snprintf(fail_valid_switch_id, sizeof (fail_valid_switch_id), "%s%s",
        id, "_SENSOR_VALID_SWITCH");

    retry = 0;
    do {
        if (retry)
            (void) sleep(retry_sleep_pshp_status);
        status = psvc_get_attr(hdlp, fail_valid_switch_id,
            PSVC_STATE_ATTR, valid_switch_state);
        if (status == PSVC_FAILURE) {
            if (hotplug_failed_count == 0) {
                /*
                 * First time the get_attr call failed
                 * set count so that if we fail again
                 * we will know
                 */
                hotplug_failed_count = 1;
                /*
                 * We probably failed because the power
                 * supply was just insterted or removed
                 * before the get_attr call. We then
                 * return from this policy successfully
                 * knowing it will be run again shortly
                 * with the right PS state.
                 */
                return (PSVC_SUCCESS);
            } else {
                /*
                 * We have failed before and so this
                 * we will consider a hardware problem
                 * and it should be reported
                 */
                syslog(LOG_ERR,
                    "Failed getting %s State: ",
                    "ps_hotplug_status_0\n",
                    fail_valid_switch_id);
                return (status);
            }
        }
        /*
         * Because we have successfully gotten a value from
         * the i2c device on the PS we will set the
         * failed_count to 0
         */
        hotplug_failed_count = 0;

        status = psvc_get_attr(hdlp, id, PSVC_STATE_ATTR, state);
        if (status == PSVC_FAILURE)
            return (status);
        retry++;
        /*
         * check to see if we need to retry. the conditions are:
         *
         * valid_switch_state   state           retry
         * --------------------------------------------------
         *  PSVC_OFF    !PSVC_HOTPLUGGED    yes
         *  PSVC_ON     PSVC_HOTPLUGGED     yes
         *  PSVC_OFF    PSVC_HOTPLUGGED     no
         *  PSVC_ON     !PSVC_HOTPLUGGED    no
         */
    } while ((retry < n_retry_pshp_status) &&
        change_of_state_str(valid_switch_state, PSVC_OFF,
        state, PSVC_HOTPLUGGED));

    if ((strcmp(valid_switch_state, PSVC_OFF) == 0) &&
        (strcmp(state, PSVC_HOTPLUGGED) != 0)) {
        strcpy(state, PSVC_HOTPLUGGED);
        strcpy(fault, PSVC_NO_FAULT);
        strcpy(led_state, PSVC_LED_OFF);
        status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR,
            state);
        if (status == PSVC_FAILURE)
            return (status);
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR,
            &led_count, PSVC_DEV_FAULT_LED);
        if (status == PSVC_FAILURE)
            return (status);

        for (j = 0; j < led_count; j++) {

            status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
                &led_id, PSVC_DEV_FAULT_LED, j);
            if (status != PSVC_SUCCESS)
                return (status);

            status = psvc_set_attr(hdlp, led_id,
                PSVC_LED_STATE_ATTR, led_state);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR, SET_LED_FAILED_MSG, led_id,
                    errno);
                return (status);
            }

        }
        syslog(LOG_ERR, PS_UNPLUGGED_MSG, id);
        return (status);
    }

    if ((strcmp(valid_switch_state, PSVC_ON) == 0) &&
        (strcmp(state, PSVC_HOTPLUGGED) == 0)) {
        strcpy(state, PSVC_OK);
        strcpy(fault, PSVC_NO_FAULT);
        status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR, state);
        if (status == PSVC_FAILURE)
            return (status);
        syslog(LOG_ERR, PS_PLUGGED_MSG, id);
    }

    return (status);
}

int32_t
psvc_ps_overcurrent_check_policy_0(psvc_opaque_t hdlp, char *system)
{
    int32_t status = PSVC_SUCCESS;
    boolean_t present;
    static char *sensor_id[DAKTARI_MAX_PS][DAK_MAX_PS_I_SENSORS];
    static char *power_supply_id[DAKTARI_MAX_PS] = {NULL};
    int32_t i, j;
    int32_t amps, oc_flag = 0, ps_present = 0;
    static int32_t hi_warn[DAKTARI_MAX_PS][DAK_MAX_PS_I_SENSORS];
    char state[32];
    static int8_t overcurrent_failed_check = 0;
    static int threshold_counter = 0;

    if (power_supply_id[0] == NULL) {
        for (i = 0; i < DAKTARI_MAX_PS; i++) {
            status = psvc_get_attr(hdlp, system,
                PSVC_ASSOC_ID_ATTR, &(power_supply_id[i]),
                PSVC_PS, i);
            if (status != PSVC_SUCCESS)
                return (status);
            for (j = 0; j < DAK_MAX_PS_I_SENSORS; ++j) {
                status = psvc_get_attr(hdlp,
                    power_supply_id[i], PSVC_ASSOC_ID_ATTR,
                    &(sensor_id[i][j]), PSVC_PS_I_SENSOR, j);
                if (status != PSVC_SUCCESS)
                    return (status);
                status = psvc_get_attr(hdlp, sensor_id[i][j],
                    PSVC_HI_WARN_ATTR, &(hi_warn[i][j]));
                if (status != PSVC_SUCCESS)
                    return (status);
            }
        }
    }

    for (i = 0; i < DAKTARI_MAX_PS; i++) {
        status = psvc_get_attr(hdlp, power_supply_id[i],
            PSVC_PRESENCE_ATTR, &present);
        if (status == PSVC_FAILURE) {
            syslog(LOG_ERR, GET_PRESENCE_FAILED_MSG,
                power_supply_id[i], errno);
            return (status);
        }

        if (present == PSVC_ABSENT) {
            continue;
        }

        status = psvc_check_ps_hotplug_status_0(hdlp,
            power_supply_id[i]);
        if (status == PSVC_FAILURE)
            return (status);

        status = psvc_get_attr(hdlp, power_supply_id[i],
            PSVC_STATE_ATTR, state);
        if (status == PSVC_FAILURE)
            return (status);

        if (strcmp(state, PSVC_HOTPLUGGED) == 0) {
            continue;
        } else {
            ps_present++;
        }

        for (j = 0; j < DAK_MAX_PS_I_SENSORS; ++j) {
            status = psvc_get_attr(hdlp, sensor_id[i][j],
                PSVC_SENSOR_VALUE_ATTR, &amps);
            if (status != PSVC_SUCCESS) {
                if (overcurrent_failed_check == 0) {
                    /*
                     * First time the get_attr call
                     * failed  set count so that if we
                     * fail again we will know
                     */
                    overcurrent_failed_check = 1;
                    /*
                     * We probably failed because the power
                     * supply was just insterted or removed
                     * before the get_attr call. We then
                     * return from this policy successfully
                     * knowing it will be run again shortly
                     * with the right PS state.
                     */
                    return (PSVC_SUCCESS);
                } else {
                    /*
                     * We have failed before and so this we
                     * will consider a hardware problem and
                     * it should be reported.
                     */
                    syslog(LOG_ERR,
                        "Failed getting %s sensor value",
                        sensor_id[i][j]);
                    return (status);
                }
            }
            /*
             * Because we have successfully gotten a value from the
             * i2c device on the PS we will set the failed_count
             * to 0.
             */
            overcurrent_failed_check = 0;

            if (amps >= hi_warn[i][j]) {
                oc_flag = 1;
            }
        }
    }

    if (oc_flag) {
        /*
         * Because we observed an overcurrent
         * condition, we increment threshold_counter.
         * Once threshold_counter reaches the value
         * of n_read_overcurrent we log the event.
         */
        threshold_counter++;
        if (threshold_counter == n_read_overcurrent) {
            threshold_counter = 0;
            if (ps_present == 1) {
                syslog(LOG_ERR, PS_OVER_CURRENT_MSG);
                syslog(LOG_ERR, ADD_PS_MSG);
            } else {
                syslog(LOG_ERR, PS_OVER_CURRENT_MSG);
                syslog(LOG_ERR, REMOVE_LOAD_MSG);
            }
        }
    } else {
        threshold_counter = 0;
    }

    return (PSVC_SUCCESS);
}

int32_t
psvc_ps_device_fail_notifier_policy_0(psvc_opaque_t hdlp, char *system)
{
    static char *ps_id[DAKTARI_MAX_PS] = {NULL};
    static char *sensor_id[DAKTARI_MAX_PS][DAK_MAX_FAULT_SENSORS];
    char *led_id = "FSP_POWER_FAULT_LED";
    int i, j;
    char state[32], fault[32], previous_state[32], past_state[32];
    char led_state[32];
    char bad_sensors[DAK_MAX_FAULT_SENSORS][256];
    int32_t status = PSVC_SUCCESS;
    boolean_t present;
    int fail_state;
    static int8_t device_fail_failed_check = 0;
    int retry, should_retry;

    if (ps_id[0] == NULL) {
        for (i = 0; i < DAKTARI_MAX_PS; i++) {
            status = psvc_get_attr(hdlp, system,
                PSVC_ASSOC_ID_ATTR, &(ps_id[i]), PSVC_PS, i);
            if (status != PSVC_SUCCESS)
                return (status);
            for (j = 0; j < DAK_MAX_FAULT_SENSORS; j++) {
                status = psvc_get_attr(hdlp, ps_id[i],
                    PSVC_ASSOC_ID_ATTR, &(sensor_id[i][j]),
                    PSVC_DEV_FAULT_SENSOR, j);
                if (status != PSVC_SUCCESS)
                    return (status);
            }
        }
    }

    for (i = 0; i < DAKTARI_MAX_PS; i++) {
        fail_state = 0;
        status = psvc_get_attr(hdlp, ps_id[i], PSVC_PRESENCE_ATTR,
            &present);
        if (status == PSVC_FAILURE)
            return (status);

        if (present == PSVC_ABSENT) {
            errno = ENODEV;
            return (PSVC_FAILURE);
        }

        status = psvc_check_ps_hotplug_status_0(hdlp, ps_id[i]);
        if (status == PSVC_FAILURE)
            return (status);

        status = psvc_get_attr(hdlp, ps_id[i], PSVC_STATE_ATTR,
            past_state);
        if (status == PSVC_FAILURE)
            return (status);

        if (strcmp(past_state, PSVC_HOTPLUGGED) == 0) {
            return (PICL_SUCCESS);
        }

        retry = 0;
        do {
            if (retry)
                (void) sleep(retry_sleep_devicefail);
            fail_state = 0;
            should_retry = 0;
            for (j = 0; j < DAK_MAX_FAULT_SENSORS; ++j) {
                status = psvc_get_attr(hdlp, sensor_id[i][j],
                    PSVC_SWITCH_STATE_ATTR, state);
                if (status != PSVC_SUCCESS) {
                    if (device_fail_failed_check == 0) {
                        /*
                         * First time the get_attr call
                         * failed  set count so that
                         * if we fail again we will know
                         */
                        device_fail_failed_check = 1;
                        /*
                         * We probably failed because
                         * the power supply was just
                         * insterted or removed before
                         * the get_attr call. We then
                         * return from this policy
                         * successfully knowing it will
                         * be run again shortly
                         * with the right PS state.
                         */
                        return (PSVC_SUCCESS);
                    } else {
                        /*
                         * We have failed before and
                         * so this we will consider a
                         * hardware problem and
                         * it should be reported.
                         */
                        syslog(LOG_ERR, "Failed in "
                            "getting sensor state for "
                            "%s\n", sensor_id[i][j]);

                        return (status);
                    }
                }

                /*
                 * Because we have successfully gotten
                 * a value from the i2c device on the
                 * PS we will set the failed_count to 0.
                 */
                device_fail_failed_check = 0;

                /*
                 * If we find that the sensor is on we
                 * fill in the name of the sensor in
                 * the bad_sensor array. If the sensor
                 * is off we use EMPTY_STRING as a check
                 * later on as to when NOT to print out
                 * what is in bad_sensor[].
                 */
                if (strcmp(state, PSVC_SWITCH_ON) == 0) {
                    fail_state++;
                    strlcpy(bad_sensors[j], sensor_id[i][j],
                        sizeof (bad_sensors[j]));
                } else {
                    strcpy(bad_sensors[j], EMPTY_STRING);
                }
            }
            retry++;
            /*
             * check to see if we need to retry. the conditions are:
             *
             * fail_state       past_state      retry
             * --------------------------------------------------
             *  +       PSVC_OK         yes
             *  0       PSVC_ERROR      yes
             *  +       PSVC_ERROR      no
             *  0       PSVC_OK         no
             */
            if ((fail_state > 0) &&
                (strcmp(past_state, PSVC_OK) == 0)) {
                should_retry = 1;
            } else if ((fail_state == 0) &&
                (strcmp(past_state, PSVC_ERROR) == 0)) {
                should_retry = 1;
            }
        } while ((retry < n_retry_devicefail) && should_retry);

        if (fail_state != 0) {
            strcpy(state, PSVC_ERROR);
            strcpy(fault, PSVC_GEN_FAULT);
        } else {
            strcpy(state, PSVC_OK);
            strcpy(fault, PSVC_NO_FAULT);
        }

        status = psvc_set_attr(hdlp, ps_id[i], PSVC_STATE_ATTR, state);
        if (status != PSVC_SUCCESS)
            return (status);

        status = psvc_set_attr(hdlp, ps_id[i], PSVC_FAULTID_ATTR,
            fault);
        if (status != PSVC_SUCCESS)
            return (status);

        status = psvc_get_attr(hdlp, ps_id[i], PSVC_PREV_STATE_ATTR,
            previous_state);
        if (status != PSVC_SUCCESS)
            return (status);

        if (strcmp(state, previous_state) != 0) {
            char dev_label[32];

            psvc_get_attr(hdlp, ps_id[i], PSVC_LABEL_ATTR,
                dev_label);

            if (strcmp(state, PSVC_ERROR) == 0) {
                syslog(LOG_ERR, DEVICE_FAILURE_MSG, dev_label);
                for (j = 0; j < DAK_MAX_FAULT_SENSORS; ++j) {
                    if (strcmp(bad_sensors[j],
                        EMPTY_STRING) != 0)
                        syslog(LOG_ERR, "%s\n",
                            bad_sensors[j]);
                }
                strcpy(led_state, PSVC_LED_ON);
            } else {
                syslog(LOG_ERR, DEVICE_OK_MSG, dev_label);
                strcpy(led_state, PSVC_LED_OFF);
            }

            status = psvc_set_attr(hdlp, led_id,
                PSVC_LED_STATE_ATTR, led_state);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR, SET_LED_FAILED_MSG, led_id,
                    errno);
                return (status);
            }
        }
    }

    return (PSVC_SUCCESS);
}

int32_t
psvc_ps_check_and_disable_dr_policy_0(psvc_opaque_t hdlp, char *id)
{
    char        state[32];
    static char *name[DAKTARI_MAX_PS] = {NULL};
    int     ps_cnt = 0;
    int     i, j;
    int     dr_conf;
    int     fd, rv;
    boolean_t   present;
    char        dev_path[sizeof (HPC3130_DEV)+8];
    unsigned char   controller_names[HPC3130_CONTROLLERS] =
        { 0xe2, 0xe6, 0xe8, 0xec };

    if (name[0] == NULL) {
        for (i = 0; i < DAKTARI_MAX_PS; i++) {
            rv = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
                &(name[i]), PSVC_PS, i);
            if (rv != PSVC_SUCCESS)
                return (rv);
        }
    }

    /*
     * Go through the power supplies to make sure they're present
     * and OK.
     */
    ps_cnt = DAKTARI_MAX_PS;
    for (i = 0; i < DAKTARI_MAX_PS; i++) {
        rv = psvc_get_attr(hdlp, name[i], PSVC_PRESENCE_ATTR,
            &present);
        if (rv != PSVC_SUCCESS)
            return (rv);

        if (present != PSVC_PRESENT) {
            ps_cnt--;
            continue;
        } else {
            rv = psvc_get_attr(hdlp, name[i], PSVC_STATE_ATTR,
                state);
            if (rv != PSVC_SUCCESS)
                return (rv);

            if (strcmp(state, PSVC_OK))
                ps_cnt--;
        }
    }

    /*
     * No change in DR configuration is needed if the new power supply
     * count equals the current count.
     */
    if (ps_cnt == co_ps)
        return (PSVC_SUCCESS);

    /*
     * Disable DR when hotplugged down to 1 power supply; enable DR when
     * hotplugged up from 1 supply.
     */
    assert(ps_cnt);
    if ((co_ps == 0 || co_ps > 1) && ps_cnt != 1) {
        co_ps = ps_cnt;
        return (PSVC_SUCCESS);
    }
    dr_conf = (ps_cnt == 1 ? HPC3130_DR_DISABLE : HPC3130_DR_ENABLE);
    co_ps = ps_cnt;

    for (i = 0; i < HPC3130_CONTROLLERS; i++) {
        for (j = 0; j < HPC3130_SLOTS; j++) {
            (void) snprintf(dev_path, sizeof (dev_path),
                HPC3130_DEV, controller_names[i], j);
            fd = open(dev_path, O_RDWR);
            if (fd == -1)
                return (PSVC_FAILURE);

            rv = ioctl(fd, HPC3130_CONF_DR, &dr_conf);
            close(fd);
            if (rv == -1)
                return (PSVC_FAILURE);
        }
    }

    return (PSVC_SUCCESS);
}

int32_t
psvc_fan_blast_shutoff_policy_0(psvc_opaque_t hdlp, char *id)
{
    char        switch_status[32];
    int32_t     status = PSVC_SUCCESS;

    status = psvc_get_attr(hdlp, id, PSVC_SWITCH_STATE_ATTR, switch_status);
    if (status != PSVC_SUCCESS)
        return (status);
    status = psvc_set_attr(hdlp, id, PSVC_SWITCH_STATE_ATTR,
        PSVC_SWITCH_OFF);
    if (status != PSVC_SUCCESS)
        return (status);
    status = psvc_set_attr(hdlp, id, PSVC_SWITCH_STATE_ATTR,
        PSVC_SWITCH_ON);
    if (status != PSVC_SUCCESS)
        return (status);
    status = psvc_set_attr(hdlp, id, PSVC_SWITCH_STATE_ATTR,
        PSVC_SWITCH_OFF);

    return (status);
}

int32_t
psvc_fan_fault_check_policy_0(psvc_opaque_t hdlp, char *system)
{
    static char *fan_id[DAK_MAX_FANS] = {NULL};
    boolean_t enabled;
    int32_t speed;
    int32_t status = PSVC_SUCCESS;
    int r;
    static int threshold_counter = 0;

    if (fan_id[0] == NULL) {
        for (r = 0; r < DAK_MAX_FANS; r++) {
            status = psvc_get_attr(hdlp, system,
                PSVC_ASSOC_ID_ATTR, &(fan_id[r]), PSVC_FAN, r);
            if (status != PSVC_SUCCESS)
                return (status);
        }
    }

    for (r = 0; r < DAK_MAX_FANS; r++) {
        status = psvc_get_attr(hdlp, fan_id[r], PSVC_ENABLE_ATTR,
            &enabled);
        if (status != PSVC_SUCCESS)
            return (status);

        if (enabled == PSVC_ENABLED) {
            uint64_t features;
            char *switch_id;
            char switch_state[32], fan_state[32];
            int fan_count, fans;
            char *other_fan_id;
            char fstate[32], ffault[32];

            /*
             * If any other fan on the fan tray has an ERROR state,
             * mark this fan bad and return
             */
            psvc_get_attr(hdlp, fan_id[r], PSVC_ASSOC_MATCHES_ATTR,
                &fan_count, PSVC_FAN_TRAY_FANS);
            for (fans = 0; fans < fan_count; ++fans) {
                status = psvc_get_attr(hdlp, fan_id[r],
                    PSVC_ASSOC_ID_ATTR, &other_fan_id,
                    PSVC_FAN_TRAY_FANS, fans);
                if (status == PSVC_FAILURE)
                    return (status);
                status = psvc_get_attr(hdlp, other_fan_id,
                    PSVC_STATE_ATTR, fan_state);
                if (status != PSVC_SUCCESS)
                    return (status);

                if (strcmp(fan_state, PSVC_ERROR) == 0) {
                    strlcpy(ffault, PSVC_GEN_FAULT,
                        sizeof (ffault));
                    status = psvc_set_attr(hdlp, fan_id[r],
                        PSVC_FAULTID_ATTR, ffault);
                    if (status != PSVC_SUCCESS)
                        return (status);

                    strlcpy(fstate, PSVC_ERROR,
                        sizeof (fstate));
                    status = psvc_set_attr(hdlp, fan_id[r],
                        PSVC_STATE_ATTR, fstate);

                    return (status);
                }
            }

            /*
             * Select tachometer for IO or CPU primary/secondary
             * fans.
             */
            pthread_mutex_lock(&fan_mutex);

            status = psvc_get_attr(hdlp, fan_id[r],
                PSVC_ASSOC_ID_ATTR, &switch_id,
                PSVC_FAN_PRIM_SEC_SELECTOR, 0);

            if (status != PSVC_FAILURE) {
                status = psvc_get_attr(hdlp, fan_id[r],
                    PSVC_FEATURES_ATTR, &features);
                if (status == PSVC_FAILURE) {
                    pthread_mutex_unlock(&fan_mutex);
                    return (status);
                }

                if (features & PSVC_DEV_PRIMARY)
                    strlcpy(switch_state, PSVC_SWITCH_ON,
                        sizeof (switch_state));
                else
                    strlcpy(switch_state, PSVC_SWITCH_OFF,
                        sizeof (switch_state));
                status = psvc_set_attr(hdlp, switch_id,
                    PSVC_SWITCH_STATE_ATTR, switch_state);
                if (status == PSVC_FAILURE) {
                    pthread_mutex_unlock(&fan_mutex);
                    return (status);
                }

                /* allow time for speed to be determined */
                (void) poll(NULL, 0, 250);
            }

            status = psvc_get_attr(hdlp, fan_id[r],
                PSVC_SENSOR_VALUE_ATTR, &speed);
            if (status != PSVC_SUCCESS) {
                pthread_mutex_unlock(&fan_mutex);
                return (status);
            }

            pthread_mutex_unlock(&fan_mutex);

            if (speed == 0) {
                threshold_counter++;
                if (threshold_counter ==
                    n_read_fanfault) {
                    int32_t i;
                    int32_t led_count;
                    char led_state[32];
                    char *led_id;
                    char *slot_id;
                    char label[32];
                    char state[32], fault[32];

                    threshold_counter = 0;
                    strlcpy(fault, PSVC_GEN_FAULT,
                        sizeof (fault));
                    status = psvc_set_attr(hdlp, fan_id[r],
                        PSVC_FAULTID_ATTR, fault);
                    if (status != PSVC_SUCCESS)
                        return (status);

                    strlcpy(state, PSVC_ERROR,
                        sizeof (state));
                    status = psvc_set_attr(hdlp, fan_id[r],
                        PSVC_STATE_ATTR, state);
                    if (status != PSVC_SUCCESS)
                        return (status);

                    status = psvc_get_attr(hdlp, fan_id[r],
                        PSVC_LABEL_ATTR, label);
                    if (status != PSVC_SUCCESS)
                        return (status);

                    syslog(LOG_ERR, DEVICE_FAILURE_MSG,
                        label);

                    /* turn on fault LEDs */
                    psvc_get_attr(hdlp, fan_id[r],
                        PSVC_ASSOC_MATCHES_ATTR, &led_count,
                        PSVC_DEV_FAULT_LED);
                    strlcpy(led_state, PSVC_LED_ON,
                        sizeof (led_state));
                    for (i = 0; i < led_count; ++i) {
                        status = psvc_get_attr(hdlp,
                            fan_id[r],
                            PSVC_ASSOC_ID_ATTR, &led_id,
                            PSVC_DEV_FAULT_LED, i);
                        if (status == PSVC_FAILURE)
                            return (status);

                        status = psvc_set_attr(hdlp,
                            led_id, PSVC_LED_STATE_ATTR,
                            led_state);
                        if (status == PSVC_FAILURE)
                            return (status);
                    }

                    /* turn on OK to remove LEDs */

                    status = psvc_get_attr(hdlp, fan_id[r],
                        PSVC_ASSOC_ID_ATTR, &slot_id,
                        PSVC_PARENT, 0);
                    if (status != PSVC_SUCCESS)
                        return (status);

                    psvc_get_attr(hdlp, slot_id,
                        PSVC_ASSOC_MATCHES_ATTR, &led_count,
                        PSVC_SLOT_REMOVE_LED);
                    strlcpy(led_state, PSVC_LED_ON,
                        sizeof (led_state));
                    for (i = 0; i < led_count; ++i) {
                        status = psvc_get_attr(hdlp,
                            slot_id,
                            PSVC_ASSOC_ID_ATTR, &led_id,
                            PSVC_SLOT_REMOVE_LED, i);
                        if (status == PSVC_FAILURE)
                            return (status);

                        status = psvc_set_attr(hdlp,
                            led_id, PSVC_LED_STATE_ATTR,
                            led_state);
                        if (status == PSVC_FAILURE)
                            return (status);
                    }
                }
            }
        }
    }

    return (PSVC_SUCCESS);
}

/*
 * This routine takes in the PSVC handle pointer, the PS name, and the
 * instance number (0, 1, or 2). It simply make a psvc_get call to get the
 * presence of each of the children under the PS. This call will set the
 * presence state of the child device if it was not there when the system
 * was booted.
 */
static int
handle_ps_hotplug_children_presence(psvc_opaque_t hdlp, char *id)
{
    char *sensor_id;
    char fail_valid_switch_id[PICL_PROPNAMELEN_MAX];
    int32_t status = PSVC_SUCCESS;
    boolean_t presence;
    int j;

    /* Get the Sensor Valid Switch presence */
    snprintf(fail_valid_switch_id, sizeof (fail_valid_switch_id), "%s%s",
        id, "_SENSOR_VALID_SWITCH");

    status = psvc_get_attr(hdlp, fail_valid_switch_id, PSVC_PRESENCE_ATTR,
        &presence);
    if (status != PSVC_SUCCESS)
        return (status);

    /* Go through each PS's fault sensors */
    for (j = 0; j < DAK_MAX_FAULT_SENSORS; j++) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &(sensor_id), PSVC_DEV_FAULT_SENSOR, j);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_get_attr(hdlp, sensor_id, PSVC_PRESENCE_ATTR,
            &presence);
        if (status != PSVC_SUCCESS)
            return (status);
    }

    /* Go through each PS's current sensors */
    for (j = 0; j < DAK_MAX_PS_I_SENSORS; ++j) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &(sensor_id), PSVC_PS_I_SENSOR, j);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_get_attr(hdlp, sensor_id, PSVC_PRESENCE_ATTR,
            &presence);
        if (status != PSVC_SUCCESS)
            return (status);

    }

    /* Go through each PS's onboard i2c hardware */
    for (j = 0; j < 3; j++) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &(sensor_id), PSVC_PHYSICAL_DEVICE, j);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_get_attr(hdlp, sensor_id, PSVC_PRESENCE_ATTR,
            &presence);
        if (status != PSVC_SUCCESS)
            return (status);
    }

    return (status);
}

static i2c_hp_t devices[3][3] = {
{{{0, 0x90}, "adio", "i2c-pcf8591"}, {{0, 0x70}, "ioexp", "i2c-pcf8574"},
    {{0, 0xa0}, "fru", "i2c-at24c64"}},
{{{0, 0x92}, "adio", "i2c-pcf8591"}, {{0, 0x72}, "ioexp", "i2c-pcf8574"},
    {{0, 0xa2}, "fru", "i2c-at24c64"}},
{{{0, 0x94}, "adio", "i2c-pcf8591"}, {{0, 0x74}, "ioexp", "i2c-pcf8574"},
    {{0, 0xa4}, "fru", "i2c-at24c64"}},
};

int32_t
psvc_ps_hotplug_policy_0(psvc_opaque_t hdlp, char *id)
{
    boolean_t presence, previous_presence;
    int32_t status = PSVC_SUCCESS;
    char label[32], state[32], fault[32];
    int32_t ps_instance, led_count;
    char *switch_id, *led_id;
    int i;
    picl_nodehdl_t parent_node;
    char parent_path[256], ps_path[256];
    picl_nodehdl_t child_node;
    devctl_hdl_t bus_handle, dev_handle;
    devctl_ddef_t ddef_hdl;
    char pcf8574_devpath[256], pcf8591_devpath[256], fru_devpath[256];
    int retry;

    status = psvc_get_attr(hdlp, id, PSVC_PREV_PRESENCE_ATTR,
        &previous_presence);
    if (status != PSVC_SUCCESS)
        return (status);

    retry = 0;
    do {
        if (retry)
            (void) sleep(retry_sleep_pshp);

        status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &presence);
        if (status != PSVC_SUCCESS)
            return (status);
        retry++;
    } while ((retry < n_retry_pshp) &&
        (presence != previous_presence));

    if (presence == previous_presence) {
        /* No change */
        return (status);
    }

    status = psvc_get_attr(hdlp, id, PSVC_LABEL_ATTR, label);
    if (status != PSVC_SUCCESS)
        return (status);

    /* convert name to node, and parent path */
    psvcplugin_lookup(id, parent_path, &child_node);

    if (presence == PSVC_PRESENT) {
        /*
         * Run this code if Power Supply was just added into the
         * System.  This code toggles hotplug switch and adds the
         * PS and it's children to the picl tree. We then goto adding
         * device drivers at bottom of the routine.
         */
        int32_t switch_count;
        char state[32], fault[32];
        char switch_state[32];

        /* may detect presence before all connections are made */
        (void) poll(NULL, 0, 500);

        /* Device added */
        syslog(LOG_ERR, DEVICE_INSERTED_MSG, label);

        strcpy(state, PSVC_OK);
        status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR, state);
        if (status != PSVC_SUCCESS)
            return (status);

        strcpy(fault, PSVC_NO_FAULT);
        status = psvc_set_attr(hdlp, id, PSVC_FAULTID_ATTR, fault);
        if (status != PSVC_SUCCESS)
            return (status);

        /* Enable i2c bus */
        psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR,
            &switch_count, PSVC_HOTPLUG_ENABLE_SWITCH);
        for (i = 0; i < switch_count; ++i) {
            status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
                &switch_id, PSVC_HOTPLUG_ENABLE_SWITCH, i);
            if (status == PSVC_FAILURE)
                return (status);

            strcpy(switch_state, PSVC_SWITCH_OFF);
            status = psvc_set_attr(hdlp, switch_id,
                PSVC_SWITCH_STATE_ATTR, switch_state);
            if (status == PSVC_FAILURE)
                return (status);

            strcpy(switch_state, PSVC_SWITCH_ON);
            status = psvc_set_attr(hdlp, switch_id,
                PSVC_SWITCH_STATE_ATTR, switch_state);
            if (status == PSVC_FAILURE)
                return (status);
        }
        ptree_get_node_by_path(parent_path, &parent_node);
        ptree_add_node(parent_node, child_node);
        snprintf(ps_path, sizeof (ps_path), "%s/%s", parent_path, id);
        psvcplugin_add_children(ps_path);
    } else {
        /*
         * Run this code if PS was just removed from the system. We
         * delete the device from the picl tree and then shut off
         * all fault lights associated with the PS.  We also set the
         * device state to PSVC_REMOVED so that if we hit overcurrent
         * or fault checking code we can do a psvc call to see that
         * the device has not offically been added into the system.
         * We then will drop to code lower in the routine to remove
         * the device drivers for this PS.
         */

        /* Device removed */
        syslog(LOG_ERR, DEVICE_REMOVED_MSG, label);
        ptree_delete_node(child_node);
        psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR, &led_count,
            PSVC_DEV_FAULT_LED);

        for (i = 0; i < led_count; i++) {
            status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
                &led_id, PSVC_DEV_FAULT_LED, i);
            if (status != PSVC_SUCCESS) {
                return (status);
            }

            status = psvc_set_attr(hdlp, led_id,
                PSVC_LED_STATE_ATTR, PSVC_OFF);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR, SET_LED_FAILED_MSG, led_id,
                    errno);
                return (status);
            }

        }

        strcpy(state, PSVC_OK);
        strcpy(fault, PSVC_NO_FAULT);

        status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR, state);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_set_attr(hdlp, id, PSVC_FAULTID_ATTR, fault);
        if (status != PSVC_SUCCESS)
            return (status);
    }

    status = psvc_set_attr(hdlp, id, PSVC_PREV_PRESENCE_ATTR, &presence);
    if (status != PSVC_SUCCESS)
        return (status);

    status = psvc_get_attr(hdlp, id, PSVC_INSTANCE_ATTR, &ps_instance);
    if (status != PSVC_SUCCESS)
        return (status);

    if (presence != PSVC_PRESENT) {
        /*
         * This is the additional code needed to remove the PS from
         * the system.  It removes the device drivers from the
         * device tree.
         */
        snprintf(pcf8574_devpath, sizeof (pcf8574_devpath), PCF8574,
            devices[ps_instance][1].addr[1]);
        snprintf(pcf8591_devpath, sizeof (pcf8591_devpath), PCF8591,
            devices[ps_instance][0].addr[1]);
        snprintf(fru_devpath, sizeof (fru_devpath), FRU,
            devices[ps_instance][2].addr[1]);

        dev_handle = devctl_device_acquire(pcf8591_devpath, 0);
        if (dev_handle == NULL) {
            syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG,
                pcf8591_devpath, errno);
            devctl_release(dev_handle);
            return (PSVC_FAILURE);
        } else if ((devctl_device_remove(dev_handle)) &&
            (errno != ENXIO)) {
                syslog(LOG_ERR, DEVTREE_NODE_DELETE_FAILED,
                    pcf8591_devpath, errno);
                devctl_release(dev_handle);
                return (PSVC_FAILURE);
            } else {
                devctl_release(dev_handle);
                status = PSVC_SUCCESS;
            }

        dev_handle = devctl_device_acquire(pcf8574_devpath, 0);
        if (dev_handle == NULL) {
            syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG,
                pcf8574_devpath, errno);
            devctl_release(dev_handle);
            return (PSVC_FAILURE);
        } else if ((devctl_device_remove(dev_handle)) &&
            (errno != ENXIO)) {
                syslog(LOG_ERR, DEVTREE_NODE_DELETE_FAILED,
                    pcf8574_devpath, errno);
                devctl_release(dev_handle);
                return (PSVC_FAILURE);
            } else {
                devctl_release(dev_handle);
                status = PSVC_SUCCESS;
            }

        dev_handle = devctl_device_acquire(fru_devpath, 0);
        if (dev_handle == NULL) {
            syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG,
                fru_devpath, errno);
            devctl_release(dev_handle);
            return (PSVC_FAILURE);
        } else if ((devctl_device_remove(dev_handle)) &&
            (errno != ENXIO)) {
                syslog(LOG_ERR, DEVTREE_NODE_DELETE_FAILED,
                    fru_devpath, errno);
                devctl_release(dev_handle);
                return (PSVC_FAILURE);
            } else {
                devctl_release(dev_handle);
                status = PSVC_SUCCESS;
            }

        return (status);
    }

    /*
     * This code is to update the presences of power supply child
     * devices in the event that picld was started without a power
     * supply present.  This call makes the devices available
     * after that initial insertion.
     */
    status = handle_ps_hotplug_children_presence(hdlp, id);
    if (status == PSVC_FAILURE) {
        return (status);
    }

    /*
     * We fall through to here if the device has been inserted.
     * Add the devinfo tree node entry for the seeprom and attach
     * the i2c seeprom driver
     */

    bus_handle = devctl_bus_acquire(I2C_NODE, 0);
    if (bus_handle == NULL) {
        syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG, I2C_NODE, errno);
        return (PSVC_FAILURE);
    }
    /* Create the deivce nodes for all 3 i2c parts on the PS */
    for (i = 0; i < 3; i++) {
        ddef_hdl = devctl_ddef_alloc(devices[ps_instance][i].name, 0);
        if (ddef_hdl == NULL) {
            syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG,
                devices[ps_instance][i].name, errno);
            return (PSVC_FAILURE);
        }
        status = devctl_ddef_string(ddef_hdl, "compatible",
            devices[ps_instance][i].compatible);
        if (status == -1) {
            syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG,
                devices[ps_instance][i].name, errno);
            return (PSVC_FAILURE);
        }
        status = devctl_ddef_int_array(ddef_hdl, "reg", 2,
            devices[ps_instance][i].addr);
        if (status == -1) {
            syslog(LOG_ERR, DEVICE_HANDLE_FAIL_MSG,
                devices[ps_instance][i].name, errno);
            return (PSVC_FAILURE);
        }
        if (devctl_bus_dev_create(bus_handle, ddef_hdl, 0,
            &dev_handle)) {
            syslog(LOG_ERR, DEVTREE_NODE_CREATE_FAILED,
                devices[ps_instance][i].name, errno);
            return (PSVC_FAILURE);
        } else
            devctl_release(dev_handle);
        devctl_ddef_free(ddef_hdl);
    }
    devctl_release(bus_handle);

    return (status);
}

static void
shutdown_routine()
{
    static boolean_t shutdown_flag = 0;

    if (!(shutdown_flag)) {
        system(shutdown_string);
        shutdown_flag = 1;
    }
}

/*
 * This policy checks temperature sensors to see if the fault attribute
 * is set to either High or Low Shutdown. If so then it shuts the system
 * down with a 1 minute warning period
 */
int32_t
psvc_shutdown_policy(psvc_opaque_t hdlp, char *id)
{
    int32_t status;
    char    fault[32] = {0};
    boolean_t   pr;
    int retry;

    status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &pr);
    if ((status != PSVC_SUCCESS) || (pr != PSVC_PRESENT)) {
        return (status);
    }

    retry = 0;
    do {
        if (retry)
            (void) sleep(retry_sleep_temp_shutdown);
        status = psvc_get_attr(hdlp, id, PSVC_FAULTID_ATTR, fault);
        if (status != PSVC_SUCCESS)
            return (status);
        retry++;
    } while (((strcmp(fault, PSVC_TEMP_LO_SHUT) == 0) ||
        (strcmp(fault, PSVC_TEMP_HI_SHUT) == 0)) &&
        (retry < n_retry_temp_shutdown));
    if ((strcmp(fault, PSVC_TEMP_LO_SHUT) == 0) ||
        (strcmp(fault, PSVC_TEMP_HI_SHUT) == 0)) {
        shutdown_routine();
    }

    return (PSVC_SUCCESS);
}

int32_t
psvc_check_disk_fault_policy_0(psvc_opaque_t hdlp, char *id)
{
    int32_t     status = PSVC_SUCCESS;
    int32_t     i;
    char        curr_state[32], prev_state[32], led_state[32];
    char        disk_fault[32], disk_state[32];
    static char *disk_id[DAK_MAX_DISKS] = {NULL};
    static char *led_id[DAK_MAX_DISKS] = {NULL};
    static char *parent_id[DAK_MAX_DISKS] = {NULL};
    boolean_t   present;
    int     retry;

    /*
     * Check which disk faulted, now get the disks.
     * We are now going to get disk, disk parent,
     * parent's leds, and check to see if parent's leds are on
     */

    if (disk_id[0] == NULL) {
        for (i = 0; i < DAK_MAX_DISKS; i++) {
            status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
                &(disk_id[i]), PSVC_DISK, i);
            if (status != PSVC_SUCCESS)
                return (status);
            status = psvc_get_attr(hdlp, disk_id[i],
                PSVC_ASSOC_ID_ATTR, &(parent_id[i]),
                PSVC_PARENT, 0);
            if (status != PSVC_SUCCESS)
                return (status);
            status = psvc_get_attr(hdlp, parent_id[i],
                PSVC_ASSOC_ID_ATTR, &(led_id[i]),
                PSVC_SLOT_FAULT_LED, 0);
            if (status != PSVC_SUCCESS)
                return (status);

        }
    }

    for (i = 0; i < DAK_MAX_DISKS; i++) {
        curr_state[0] = 0;
        prev_state[0] = 0;

        status = psvc_get_attr(hdlp, disk_id[i], PSVC_PRESENCE_ATTR,
            &present);
        if (status != PSVC_SUCCESS)
            return (status);

        if (present == PSVC_ABSENT)
            continue;

        /*
         * Check if whether or not the led is on.
         * If so, then this disk has a problem and
         * set its fault and error states to bad.
         * If not, then set fault and error states to good.
         * If the disk underwent a change in state, then
         * print out what state it's now in.
         */

        status = psvc_get_attr(hdlp, disk_id[i], PSVC_STATE_ATTR,
            prev_state);
        if (status != PSVC_SUCCESS)
            return (status);

        retry = 0;
        do {
            if (retry)
                (void) sleep(retry_sleep_diskfault);
            status = psvc_get_attr(hdlp, led_id[i], PSVC_STATE_ATTR,
                led_state);
            if (status != PSVC_SUCCESS)
                return (status);
            retry++;
            /*
             * check to see if we need to retry. the conditions are:
             *
             * prev_state       led_state       retry
             * --------------------------------------------------
             * PSVC_ERROR       PSVC_LED_ON     yes
             * PSVC_OK      PSVC_LED_OFF        yes
             * PSVC_ERROR       PSVC_LED_OFF        no
             * PSVC_OK      PSVC_LED_ON     no
             */
        } while ((retry < n_retry_diskfault) &&
            change_of_state_str(prev_state, PSVC_OK,
            led_state, PSVC_LED_ON));

        /*
         * Set the disk's state and fault id according to
         * what we found the disk fault sensor (disk_slot_fault_led)
         * to be.
         */
        if (strcmp(led_state, PSVC_LED_ON) == 0) {
            strcpy(disk_fault, PSVC_GEN_FAULT);
            strcpy(disk_state, PSVC_ERROR);
        } else {
            strcpy(disk_fault, PSVC_NO_FAULT);
            strcpy(disk_state, PSVC_OK);
        }
        status = psvc_set_attr(hdlp, disk_id[i], PSVC_STATE_ATTR,
            disk_state);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_set_attr(hdlp, disk_id[i], PSVC_FAULTID_ATTR,
            disk_fault);
        if (status != PSVC_SUCCESS)
            return (status);
        /*
         * Check disk states.  If they differ, then print out
         * the current state of the disk
         */
        status = psvc_get_attr(hdlp, disk_id[i], PSVC_PREV_STATE_ATTR,
            prev_state);
        if (status != PSVC_SUCCESS)
            return (status);

        if (strcmp(disk_state, prev_state) != 0) {
            if (strcmp(disk_state, PSVC_ERROR) == 0) {
                syslog(LOG_ERR, DISK_FAULT_MSG, disk_id[i]);
            } else {
                syslog(LOG_ERR, DISK_OK_MSG, disk_id[i]);
            }
        }
    }
    return (PSVC_SUCCESS);
}

int32_t
psvc_update_FSP_fault_led_policy_0(psvc_opaque_t hdlp, char *id)
{
    int32_t status = PSVC_SUCCESS;
    int32_t i;
    int32_t dev_count, fault_state = 0;
    char    *dev_id;
    char    dev_state[32], led_state[32];
    boolean_t   present;

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR, &dev_count,
        PSVC_DEV_FAULT_SENSOR);
    if (status != PSVC_SUCCESS)
        return (status);

    fault_state = 0;

    for (i = 0; i < dev_count; i++) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &dev_id, PSVC_DEV_FAULT_SENSOR, i);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_get_attr(hdlp, dev_id, PSVC_PRESENCE_ATTR,
            &present);
        if (status != PSVC_SUCCESS)
            return (status);

        if (present == PSVC_ABSENT)
            continue;

        status = psvc_get_attr(hdlp, dev_id, PSVC_STATE_ATTR,
            dev_state);
        if (status != PSVC_SUCCESS)
            return (status);

        if (strcmp(dev_state, PSVC_ERROR) == 0) {
            fault_state = 1;
        }
    }
    if (fault_state == 1) {
        status = psvc_get_attr(hdlp, id, PSVC_STATE_ATTR, led_state);
        if (status != PSVC_SUCCESS)
            return (status);
        if (strcmp(led_state, PSVC_OFF) == 0) {
            status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR,
                PSVC_ON);
            if (status != PSVC_SUCCESS)
                return (status);
        }
    } else {
        status = psvc_get_attr(hdlp, id, PSVC_STATE_ATTR, led_state);
        if (status != PSVC_SUCCESS)
            return (status);
        if (strcmp(led_state, PSVC_ON) == 0) {
            status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR,
                PSVC_OFF);
            if (status != PSVC_SUCCESS)
                return (status);
        }
    }
    status = update_gen_fault_led(hdlp, GEN_FAULT_LED);

    return (status);
}

int32_t
update_gen_fault_led(psvc_opaque_t hdlp, char *id)
{
    int32_t status = PSVC_SUCCESS;
    int32_t i;
    int32_t led_count, fault_state;
    char    *led_id;
    char    led_state[32];

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR, &led_count,
        PSVC_DEV_FAULT_SENSOR);
    if (status != PSVC_SUCCESS)
        return (status);

    fault_state = 0;

    for (i = 0; i < led_count; i++) {
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR,
            &led_id, PSVC_DEV_FAULT_SENSOR, i);
        if (status != PSVC_SUCCESS)
            return (status);
        status = psvc_get_attr(hdlp, led_id, PSVC_STATE_ATTR,
            led_state);
        if (status != PSVC_SUCCESS)
            return (status);

        if (strcmp(led_state, PSVC_ON) == 0) {
            fault_state = 1;
        }
    }

    if (fault_state == 1) {
        status = psvc_get_attr(hdlp, id, PSVC_STATE_ATTR, led_state);
        if (status != PSVC_SUCCESS)
            return (status);
        if (strcmp(led_state, PSVC_OFF) == 0) {
            status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR,
                PSVC_ON);
            if (status != PSVC_SUCCESS)
                return (status);
        }
    } else {
        status = psvc_get_attr(hdlp, id, PSVC_STATE_ATTR, led_state);
        if (status != PSVC_SUCCESS)
            return (status);
        if (strcmp(led_state, PSVC_ON) == 0) {
            status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR,
                PSVC_OFF);
            if (status != PSVC_SUCCESS)
                return (status);
        }
    }

    return (status);
}


/*
 * This function detects whether the module present in the dakatari's
 * CPU slot is a CPU module or a Zulu (XVR-4000).
 * Based on this detection it also sets the appropriate temperature sensors
 * to HOTPLUGGED, so that it works properly with check_temp() function
 */
#define MAX_MODULE_SIZE     20
#define MAX_TEMP_SENSOR_SIZE    30

int32_t
psvc_update_cpu_module_card_node_0(psvc_opaque_t hdlp, char *id)
{
    int32_t set_temp_sensor_properties(psvc_opaque_t, char *);
    int32_t remove_module_node(psvc_opaque_t, char *);
    int32_t status = PSVC_SUCCESS;
    fru_info_t fru_data;
    char *fru, seg_name[2];
    int8_t seg_count, module_card;
    int32_t match_count, i, j, seg_desc_start = 0x1806, module_address;
    int32_t seg_found;
    boolean_t present;
    seg_desc_t segment;
    char other_module_id[MAX_MODULE_SIZE];
    char cpu_temp_sensor1[MAX_TEMP_SENSOR_SIZE];
    char cpu_temp_sensor2[MAX_TEMP_SENSOR_SIZE];
    char zulu_temp_sensor1[MAX_TEMP_SENSOR_SIZE];
    char zulu_temp_sensor2[MAX_TEMP_SENSOR_SIZE];
    int offset = 0x7;

    status = psvc_get_attr(hdlp, id, PSVC_PRESENCE_ATTR, &present);
    if ((status != PSVC_SUCCESS) || (present != PSVC_PRESENT)) {
        return (status);
    }

    status = psvc_get_attr(hdlp, id, PSVC_ASSOC_MATCHES_ATTR, &match_count,
        PSVC_FRU);
    if (status == PSVC_FAILURE) {
        return (status);
    }

    for (i = 0; i < match_count; i++) {
        seg_found = 0;
        status = psvc_get_attr(hdlp, id, PSVC_ASSOC_ID_ATTR, &fru,
            PSVC_FRU, i);
        if (status != PSVC_SUCCESS)
            return (status);

        fru_data.buf_start = 0x1805;
        fru_data.buf = (char *)&seg_count;
        fru_data.read_size = 1;

        status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
            &fru_data);
        if (status != PSVC_SUCCESS) {
            return (status);
        }

        for (j = 0; (j < seg_count) && (!seg_found); j++) {
            fru_data.buf_start = seg_desc_start;
            fru_data.buf = seg_name;
            fru_data.read_size = 2;

            status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
                &fru_data);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR, GET_ATTR_FRU_FAILED_MSG);
                return (status);
            }

            seg_desc_start = seg_desc_start + 2;
            fru_data.buf_start = seg_desc_start;
            fru_data.buf = (char *)&segment;
            fru_data.read_size = sizeof (seg_desc_t);

            status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
                &fru_data);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR, GET_ATTR_FRU_FAILED_MSG);
                return (status);
            }
            seg_desc_start = seg_desc_start + sizeof (seg_desc_t);
            if (memcmp(seg_name, "SC", 2) == 0)
                seg_found = 1;
        }

        if (seg_found) {
            module_address = segment.segoffset + offset;
            fru_data.buf_start = module_address;
            fru_data.buf = (char *)&module_card;
            fru_data.read_size = 1;
            status = psvc_get_attr(hdlp, fru, PSVC_FRU_INFO_ATTR,
                &fru_data);
            if (status != PSVC_SUCCESS) {
                syslog(LOG_ERR, GET_ATTR_FRU_FAILED_MSG);
                return (status);
            }
        } else {
            syslog(LOG_ERR, NO_FRU_INFO_MSG, id);
        }
    }

    if (strcmp(id, "ZULU_1_3_MOD_CARD") == 0) {
        strlcpy(other_module_id, "CPU_1_3_MOD_CARD", MAX_MODULE_SIZE);

        strlcpy(cpu_temp_sensor1, "CPU1_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);
        strlcpy(cpu_temp_sensor2, "CPU3_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);

        strlcpy(zulu_temp_sensor1, "ZULU1_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);
        strlcpy(zulu_temp_sensor2, "ZULU3_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);
    }

    if (strcmp(id, "ZULU_4_6_MOD_CARD") == 0) {
        strlcpy(other_module_id, "CPU_4_6_MOD_CARD", MAX_MODULE_SIZE);

        strlcpy(cpu_temp_sensor1, "CPU4_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);
        strlcpy(cpu_temp_sensor2, "CPU6_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);

        strlcpy(zulu_temp_sensor1, "ZULU4_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);
        strlcpy(zulu_temp_sensor2, "ZULU6_DIE_TEMPERATURE_SENSOR",
            MAX_TEMP_SENSOR_SIZE);
    }


    /*
     * If the module in the CPU slot is a Zulu (XVR-4000), then
     * location 0x1EB0 in its FRUid prom has a value 0xFB.
     * If Zulu (XVR-4000) is detected, delete the CPU node, otherwise
     * delete the Zulu node. Also set the temperature sensor value to
     * HOTPLUGGED for absent temperature sensors.
     */
    if ((module_card & 0xff) == 0xfb) {
        status = set_temp_sensor_properties(hdlp, cpu_temp_sensor1);
        if (status == PSVC_FAILURE) {
            return (status);
        }

        status = set_temp_sensor_properties(hdlp, cpu_temp_sensor2);
        if (status == PSVC_FAILURE) {
            return (status);
        }

        /*
         * Remove CPU node
         */
        status = remove_module_node(hdlp, other_module_id);
        if (status == PSVC_FAILURE) {
            return (status);
        }
    } else {
        status = set_temp_sensor_properties(hdlp, zulu_temp_sensor1);
        if (status == PSVC_FAILURE) {
            return (status);
        }
        status = set_temp_sensor_properties(hdlp, zulu_temp_sensor2);
        if (status == PSVC_FAILURE) {
            return (status);
        }

        /*
         * Remove Zulu (XVR-4000) node
         */
        status = remove_module_node(hdlp, id);
        if (status == PSVC_FAILURE) {
            return (status);
        }
    }

    return (PSVC_SUCCESS);
}


/*
 * Remove the CPU slot's module node
 */
int32_t
remove_module_node(psvc_opaque_t hdlp, char *id)
{
    char parent_path[256];
    picl_nodehdl_t child_node;

    /* convert name to node, and parent path */
    psvcplugin_lookup(id, parent_path, &child_node);
    /* Device removed */
    ptree_delete_node(child_node);

    return (PSVC_SUCCESS);
}


/*
 * Set absent temperature sensor values to HOTPLUGGED
 */
int32_t
set_temp_sensor_properties(psvc_opaque_t hdlp, char *id)
{
    char state[32];
    int32_t status = PSVC_SUCCESS;

    status = psvc_get_attr(hdlp, id, PSVC_STATE_ATTR, state);
    if (status == PSVC_FAILURE) {
        return (status);
    }

    if (strcmp(state, PSVC_HOTPLUGGED) != 0) {
        strcpy(state, PSVC_HOTPLUGGED);

        status = psvc_set_attr(hdlp, id, PSVC_STATE_ATTR, state);
        if (status == PSVC_FAILURE) {
            return (status);
        }
    }

    return (PSVC_SUCCESS);
}