layout_messages.c revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2003 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "%Z%%M% %I% %E% SMI"
#include <libintl.h>
#include <stdlib.h>
#include "volume_error.h"
#include "volume_output.h"
#include "volume_string.h"
#include "layout_messages.h"
/*
* FUNCTION: print_layout_volume_msg(char *type, uint64_t nbytes)
*
* PURPOSE: Prints a generic message indicating the start of the
* layout process for a volume of the indicated type and
* capacity.
*/
void
char *type,
{
gettext(" ->Layout a %s with capacity %s\n"),
}
/*
* FUNCTION: print_layout_explicit_msg(char *type)
*
* PURPOSE: Prints a generic message indicating the start of the
* layout population process using explicit components
* for a volume of the indicated type.
*/
void
char *type)
{
gettext(" ->Layout a %s with explicitly specified "
"components\n"),
type);
}
/*
* FUNCTION: print_layout_explicit_added_msg(char *comp)
*
* PURPOSE: Prints a generic message indicating the named component
* was added to a volume.
*/
void
char *comp)
{
}
/*
* FUNCTION: print_success_msg()
*
* PURPOSE: Prints a generic layout success message.
*/
void
{
}
/*
* FUNCTION: print_insufficient_resources_msg(char *type)
*
* PURPOSE: Prints a message indicating that there are insufficient
* resources.
*
* Also sets the metassist error string indicating why
* the metassist command failed. The volume type is included
* for context in this message.
*/
void
char *type)
{
gettext(" <-Failed: insufficient resources available\n"));
gettext("insufficient resources available to complete "
"requested %s\n"),
type);
}
/*
* FUNCTION: print_insufficient_hbas_msg(int n)
*
* PURPOSE: Prints a status message indicating that there are insufficient
* HBAs and that only 'n' are available.
*
* Used to indicate strategy selection during layouts.
*/
void
int n)
{
if (n == 0) {
gettext(" <--Failed: no HBA has sufficient disks\n"));
} else if (n == 1) {
gettext(" <--Failed: only 1 HBA has sufficient disks\n"));
} else {
gettext(" <--Failed: only %d HBAs have sufficient disks\n"),
n);
}
}
/*
* FUNCTION: print_insufficient_disks_msg(int n)
*
* PURPOSE: Prints a status message indicating that there are insufficient
* disks and that only 'n' are available.
*
* Used to indicate strategy selection during layouts.
*/
void
int n)
{
if (n == 0) {
gettext(" <--Failed: no disks available\n"),
n);
} else if (n == 1) {
gettext(" <--Failed: only 1 disk available\n"),
n);
} else {
gettext(" <--Failed: only %d disks available\n"),
n);
}
}
/*
* FUNCTION: print_no_hbas_msg()
*
* PURPOSE: Prints a layout failure due to no usable HBAs message.
*/
void
{
gettext(" There are no usable HBAs.\n"));
}
/*
* FUNCTION: print_debug_failure_msg(char *type, char *err)
*
* PURPOSE: Prints a generic message for unexpected failures
* during layout.
*/
void
char *type,
char *err)
{
gettext(" layout of %s failed: %s\n"),
}
/*
* FUNCTION: print_insufficient_components_msg(int ncomp)
*
* INPUT: ncomp - number of available components
*
* PURPOSE: Helper to print out a message indicating that there
* are insufficient components for a volume, only ncomps
* are actually available.
*/
void
int ncomp)
{
}
/*
* FUNCTION: print_hba_insufficient_space_msg(char *name, uint64_t nbytes)
*
* INPUT: name - a char * HBA name
*
* RETURNS: int - 0 on success
* !0 otherwise.
*
* PURPOSE: Helper to print out a message indicating the the HBA has
* insufficient space for use by the mirror layout strategy.
*/
void
char *name,
{
gettext(" <--Failed: '%s' only has %s available\n"),
}
/*
* FUNCTION: print_insufficient_capacity_msg(uint64_t nbytes)
*
* INPUT: nbytes - available capacity in bytes
*
* PURPOSE: Helper to print out a message indicating that there
* is insufficient space for a volume, only nbytes are
* actually available.
*/
void
{
}
/*
* FUNCTION: print_layout_submirrors_msg(char *type, uint64_t nbytes,
* int nsubs)
*
* PURPOSE: Prints a generic status message indicating that layout of
* nsub submirrors of the indicated type and size has begun.
*/
void
char *type,
int nsubs)
{
gettext(" -->Layout %d %s submirrors with capacity %s\n"),
}
/*
* FUNCTION: print_layout_submirrors_failed_msg(char *type, int count,
* int nsubs)
*
* PURPOSE: Prints a generic status message indicating that only count
* submirrors (out of nsubs) of the indicated type could be
* composed.
*/
void
char *type,
int count,
int nsubs)
{
if (count == 0) {
gettext(" <---Failed, no %s submirrors could "
"be composed.\n"),
type);
} else {
gettext(" <---Failed, only %d of %d %s submirror(s) "
"could be composed.\n"),
}
}
/*
* FUNCTION: print_populate_volume_msg(char *type, uint64_t nbytes)
*
* PURPOSE: Prints a generic message indicating a population process
* for a volume of the indicated type and size is beginning.
*/
void
char *type,
{
gettext(" --->Populate a %s of capacity %s\n"),
}
/*
* FUNCTION: print_populate_volume_ncomps_msg(char *type, uint64_t nbytes,
* int ncomps)
*
* PURPOSE: Prints a generic message indicating a population process
* for a volume of the indicated type, size and number of
* components is beginning.
*/
void
char *type,
int ncomps)
{
gettext(" --->Populate a %s of capacity %s (%d components)\n"),
}
/*
* FUNCTION: print_populate_success_msg()
*
* PURPOSE: Prints a generic message indicating a population process
* completed successfully.
*/
void
{
gettext(" <---Success!\n"));
}
/*
* FUNCTION: print_populate_choose_slices_msg()
*
* PURPOSE: Prints a generic message indicating a population process
* is beginning to choose slices.
*/
void
{
gettext(" choosing \"best\" slices from "
"those available...\n"));
}
/*
* FUNCTION: print_populate_no_slices_msg()
*
* PURPOSE: Prints a layout failure due to no available slices message.
*/
void
{
gettext(" <---Failed: there are no slices available.\n"));
}