model/netpr/netpr.c

	netpr.c revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 1996-2002 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#pragma ident   "%Z%%M% %I% %E% SMI"

#include <stdio.h>
#include <stdlib.h>
#include <libintl.h>
#include <locale.h>
#include <signal.h>
#include <errno.h>
#include <string.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/socket.h>
#include <fcntl.h>
#include <syslog.h>
#include "netpr.h"

static void usage_exit();

static void pipehandler(int);
char data_file_type = 0;

main(int argc, char *argv[])
{
    extern char *optarg;
    extern int optind;
    int opt;
    np_job_t *job_data;
    char *destination = NULL;
    np_bsdjob_t *bsdjob;
    np_tcpjob_t *tcpjob;
    int sockfd;
    int pr_order = CONTROL_FIRST;
    char *vendor_pr_name = NULL;
    char *tcp_port = NULL;
    size_t filesize;
    int fd;
    caddr_t pa;
    int jobstatus;
    int exit_status = 0;
    int on = 1;


    (void) setlocale(LC_ALL, "");
#if !defined(TEXT_DOMAIN)   /* Should be defined by cc -D */
#define TEXT_DOMAIN "SYS_TEST"  /* Use this only if it weren't */
#endif
    (void) textdomain(TEXT_DOMAIN);

    openlog("netpr", LOG_PID, LOG_LPR);
    (void) signal(SIGPIPE, pipehandler);

    /* reduce privileges until needed to open reserved port */
    if (seteuid(getuid())) {
        syslog(LOG_DEBUG, "seteuid failed, exiting netpr");
        exit(E_FAILURE);
    }

    if ((job_data = init_job()) == NULL) {
        fprintf(stderr, gettext("init_job(): out of memory\n"));
        exit(E_RETRY);
    }

    while ((opt = getopt(argc, argv, "f:I:p:d:T:P:t:U:c:b")) != EOF)
        switch (opt) {
        case 'f':
            data_file_type = optarg[0];
            break;
        case 'I': /* foo-49 */
            job_data->request_id = alloc_str((char *)optarg);
            syslog(LOG_DEBUG, "request_id: %s",
                job_data->request_id);
            break;
        case 'U': /* awe172-126!wendyp */
            job_data->username = alloc_str((char *)optarg);
            syslog(LOG_DEBUG, "username: %s",
                job_data->username);
            break;
        case 'p': /* foo */
            job_data->printer = alloc_str((char *)optarg);
            syslog(LOG_DEBUG, "printer: %s",
                job_data->printer);
            break;
        case 'd': /* server for printer */
            job_data->dest = alloc_str((char *)optarg);
            syslog(LOG_DEBUG, "dest: %s",
                job_data->dest);
            break;
        case 'T': /* /tmp/file2 */
            job_data->title = alloc_str((char *)optarg);
            syslog(LOG_DEBUG, "title: %s",
                job_data->title);
            break;
        case 'P':
            if ((strcmp(optarg, "bsd")) == 0)
                job_data->protocol = BSD;
            else if ((strcmp(optarg, "tcp")) == 0)
                job_data->protocol = TCP;
            else
                usage_exit();

            syslog(LOG_DEBUG, "protocol: %d",
                job_data->protocol);
            break;
        case 't':
            job_data->timeout = atoi(optarg);
            if (job_data->timeout < 0)
                usage_exit();
            break;
        case 'c':
            if ((strcmp(optarg, "first")) == 0)
                pr_order = CONTROL_FIRST;
            else if ((strcmp(optarg, "last")) == 0)
                pr_order = DATA_FIRST;
            else
                usage_exit();

            syslog(LOG_DEBUG, "bsd print order: %d", pr_order);
            break;
        case 'b':
            job_data->banner = NOBANNER;
            syslog(LOG_DEBUG, "banner : %d",
                job_data->banner);
            break;
        case '?':
            usage_exit();
        }


    if ((job_data->dest == NULL) || (job_data->request_id == NULL) ||
        (job_data->printer == NULL) || (job_data->username == NULL))
        usage_exit();

    /*
     * Check that there is a file
     */
    if (optind == argc) {
        usage_exit();
    }

    job_data->filename = alloc_str(argv[optind]);
    syslog(LOG_DEBUG, "filename : %s", job_data->filename);


    /*
     * Sanity check the file
     * returns filesize
     */

    if ((filesize = check_file(job_data->filename)) == -1) {
        syslog(LOG_DEBUG, "Skipping file %s",
        job_data->filename ? job_data->filename : "Error NULL file");

        switch (errno) {
        case EISDIR:
            (void) fprintf(stderr,
            gettext("Netpr: %s: Not a regular file\n"),
            (job_data->filename ? job_data->filename : "Noname"));
            syslog(LOG_DEBUG, "Not a regular file");
            break;
        case ESRCH:
            (void) fprintf(stderr,
            gettext("Netpr: %s: Empty file\n"),
            (job_data->filename ? job_data->filename : "Noname"));
            syslog(LOG_DEBUG, "Empty file");
            break;
        default:
            perror(job_data->filename);
            (void) fprintf(stderr,
            gettext("Netpr: Cannot access file %s\n"),
            (job_data->filename ? job_data->filename : "Noname"));
            syslog(LOG_DEBUG, "Cannot access file.");
            break;

        }

        /*
         * This file not valid, so bail
         * Exit with zero so system will keep printing
         */
        exit(0);
    }

    /*
     * file looks ok, open and mmap it
     */
    if ((fd = open(job_data->filename, O_RDONLY)) < 0) {
        (void) fprintf(stderr, gettext("Netpr: Cannot open file %s\n"),
        (job_data->filename ? job_data->filename : "Error: NULL file"));
        syslog(LOG_DEBUG, "Cannot open file: %s",
        job_data->filename ? job_data->filename : "Error NULL file");
        exit(E_BAD_FILE);
    }

    if ((pa = mmap((caddr_t)0, filesize, PROT_READ,
        (MAP_SHARED | MAP_NORESERVE), fd, (off_t)0)) == MAP_FAILED) {

        (void) close(fd);
        (void) fprintf(stderr, gettext("Netpr: Cannot mmap file %s"),
        (job_data->filename ? job_data->filename : "Error: NULL file"));

        syslog(LOG_DEBUG, "Cannot mmap file: %s",
        job_data->filename ? job_data->filename : "Error NULL file");

        exit(E_RETRY);
    }


    if (job_data->protocol == BSD) {
        bsdjob = (np_bsdjob_t *)
            create_bsd_job(job_data, pr_order, filesize);
        if (bsdjob == NULL)
            exit(E_FAILURE);
    } else {
        tcpjob = (np_tcpjob_t *)create_tcp_job(job_data, filesize);
        if (tcpjob == NULL)
            exit(E_FAILURE);
    }

    /*
     * Parse destination
     */

    if ((strpbrk(job_data->dest, DEST_SEP)) != NULL) {
        if (job_data->protocol == BSD) {
            parse_dest(job_data->dest, &destination,
                &vendor_pr_name, DEST_SEP);
            if (vendor_pr_name != NULL) {
                bsdjob->np_printer = vendor_pr_name;
                syslog(LOG_DEBUG, "bsd vendor name: %s",
                    bsdjob->np_printer);
            }
        } else {
            parse_dest(job_data->dest, &destination, &tcp_port,
                DEST_SEP);
            if (tcp_port != NULL)
                tcpjob->np_port = tcp_port;
                syslog(LOG_DEBUG, "tcp_port %s",
                    tcpjob->np_port);
        }
        if (destination == NULL ||
            (job_data->protocol == TCP && tcp_port == NULL)) {
            (void) fprintf(stderr,
            gettext("Netpr: system error parsing destination %s\n"),
            job_data->dest);
            syslog(LOG_DEBUG, "system error parsing destination %s",
            job_data->dest);

            exit(E_FAILURE);
        }

    } else {
        destination = job_data->dest;
    }
    syslog(LOG_DEBUG, "destination : %s", destination);

    /*
     * We are now ready to open a connection to the printer
     * and print each of the files
     */

    if (job_data->protocol == BSD) {

        /* set privileges to get reserved port */
        if (seteuid(0)) {
            syslog(LOG_DEBUG, "seteuid(0) failed, exiting netpr");
            exit(E_FAILURE);
        }
        if ((sockfd =  net_open(destination, 20)) < 0) {
            (void) fprintf(stderr,
                gettext("Netpr: Cannot open connection to <%s>\n"),
                destination);
                syslog(LOG_DEBUG,
                "Cannot open connection to %s: retrying",
                destination);
            exit(E_RETRY);
        }
    } else {
        if ((sockfd = tcp_open(destination, tcpjob, 20)) == -1) {
            exit(E_RETRY);
        }
    }

    /* lower privileges as we now have the reserved port */
    if (setuid(getuid())) {
        syslog(LOG_DEBUG, "setuid() failed, exiting netpr");
        exit(E_FAILURE);
    }


    /* Set SO_KEEPALIVE on socket to keep open */
    if ((setsockopt(sockfd, SOL_SOCKET, SO_KEEPALIVE,
            (char *)&on, sizeof (on))) < 0) {
        syslog(LOG_DEBUG, "setsocket (SO_KEEPALIVE): %m");
    }

    if (job_data->protocol == BSD) {
        if ((jobstatus = bsd_print(sockfd, pa,  bsdjob)) != 0) {
            (void) fprintf(stderr,
            gettext("Netpr: Error return from bsd_print <%d>\n"),
            jobstatus);
            syslog(LOG_DEBUG,
                "Error return from bsd_print <%d>", jobstatus);
            exit_status = E_RETRY;
        }
    } else {
        if ((jobstatus =
            tcp_print(sockfd, pa, tcpjob)) != 0) {
            (void) fprintf(stderr,
            gettext("Netpr: Error return from tcp_print <%d>\n"),
            jobstatus);
            syslog(LOG_DEBUG,
                "Error return from tcp_print <%d>", jobstatus);
            exit_status = E_RETRY;
        }
    }

    (void) close(fd);
    (void) close(sockfd);
    (void) munmap(pa, filesize);

    syslog(LOG_DEBUG, "exit status: %d", exit_status);
    return (exit_status);
}

static void
usage_exit()
{
    (void) fprintf(stderr,
    gettext("Usage: netpr -I request_id -p printer -d destination\n"));
    (void) fprintf(stderr,
    gettext("\t\t-U username [ -f type ] [ -T title ] [ -P protocol ]\n"));
    (void) fprintf(stderr,
        gettext("\t\t[-t timeout] [ -c ] [ -b ]\n"));
    (void) fprintf(stderr, gettext("\t\tfiles\n"));
    exit(E_BAD_INPUT);
}

/*ARGSUSED*/
void
pipehandler(int i)
{
    (void) signal(SIGPIPE, pipehandler);
    syslog(LOG_DEBUG, "Received SIGPIPE, connection to printer broken");
    exit(E_SIGPIPE);
}