iscsi_conn.c revision 36c5fee33fa8b822175d410202aebcf592c8d342
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#pragma ident "%Z%%M% %I% %E% SMI"
#include <signal.h>
#include <pthread.h>
#include <assert.h>
#include <sys/select.h>
#include <stdlib.h>
#include <poll.h>
#include <strings.h>
#include <sys/filio.h>
#include <errno.h>
#include <utility.h>
#include <unistd.h>
#include <sys/stropts.h>
#include <syslog.h>
#include <sys/iscsi_protocol.h>
#include "local_types.h"
#include "iscsi_conn.h"
#include "iscsi_sess.h"
#include "iscsi_login.h"
#include "iscsi_ffp.h"
#include "utility.h"
#include "target.h"
#include "port.h"
#include "t10.h"
/*
* defined here so that pad_text is initialized to zero's. It's
* never modified.
*/
static const char pad_text[ISCSI_PAD_WORD_LEN] = { 0 };
static void iscsi_conn_data_rqst(t10_cmd_t *cmd);
static void iscsi_conn_cmdcmplt(t10_cmd_t *cmd);
static void iscsi_conn_data_in(t10_cmd_t *);
static void iscsi_conn_pkt(iscsi_conn_t *c, iscsi_rsp_hdr_t *in);
static void send_datain_pdu(iscsi_conn_t *c, t10_cmd_t *cmd,
uint8_t final_flag);
static void send_scsi_rsp(iscsi_conn_t *c, t10_cmd_t *cmd);
static void queue_noop_in(iscsi_conn_t *c);
static char *state_to_str(iscsi_state_t s);
static void send_async_logout(iscsi_conn_t *c);
static void send_async_scsi(iscsi_conn_t *c, int key, int asc, int ascq);
void *
conn_poller(void *v)
{
iscsi_conn_t *c = (iscsi_conn_t *)v;
int nbytes,
pval;
nfds_t nfds = 1;
struct pollfd fds[1];
iscsi_state_t state;
target_queue_t *mgmtq = c->c_mgmtq;
fds[0].fd = c->c_fd;
fds[0].events = POLLIN;
util_title(c->c_mgmtq, Q_CONN_LOGIN, c->c_num, "Start Poller");
while ((pval = poll(fds, nfds, 30 * 1000)) != -1) {
/*
* The true asynchronous events are when we're in S5_LOGGED_IN
* state. In the iscsi_full_feature() code the state is
* locked and checked before sending any messages along. The
* mutex is grabbed here only to prevent a collision between
* some thread setting the state and our reading of the value.
* There's no harm in us grabbing the state which might
* change right after we unlock the mutex.
*/
(void) pthread_mutex_lock(&c->c_state_mutex);
state = c->c_state;
(void) pthread_mutex_unlock(&c->c_state_mutex);
switch (state) {
case S1_FREE:
/*
* If we moved to the free state. The session
* was sent a message to shutdown. Once it
* completes it will reply with a shutdown
* response which will close the main
* connection thread. So, this thread just
* returns a stop processing incoming packets.
*/
goto error;
case S3_XPT_UP:
if (ioctl(c->c_fd, FIONREAD, &nbytes) < 0) {
queue_message_set(c->c_dataq, 0, msg_shutdown,
0);
goto error;
}
/*
* To be fully compliant the code should use
* ioctl(fd, I_PEEK, (struct strpeek v)); and
* look to see if the header is indeed a login
* packet. If not, just close the connection.
*/
if (nbytes < sizeof (iscsi_login_hdr_t)) {
queue_message_set(c->c_dataq, 0,
msg_shutdown, 0);
goto error;
} else {
/*
* Change the state to S4_IN_LOGIN.
* Since we haven't touched the data
* waiting on the stream when the
* sema_post() occurs below the poller
* will find data again and send
* another packet ready message at
* which point we deal with the
* login.
*/
conn_state(c, T4);
}
break;
case S4_IN_LOGIN:
if (iscsi_handle_login_pkt(c) == False)
goto error;
break;
case S7_LOGOUT_REQUESTED:
case S5_LOGGED_IN:
if (fds[0].revents & POLLIN) {
if (iscsi_full_feature(c) == False)
goto error;
} else if (c->c_sess->s_type == SessionNormal) {
queue_prt(c->c_mgmtq, Q_CONN_NONIO,
"CON%x Send a NOP request", c->c_num);
queue_noop_in(c);
}
break;
case S6_IN_LOGOUT:
goto error;
case S8_CLEANUP_WAIT:
queue_prt(c->c_mgmtq, Q_CONN_ERRS,
"Haven't handled state S8");
queue_message_set(c->c_dataq, 0,
msg_shutdown_rsp, 0);
goto error;
}
}
error:
/*
* Only when we're logged in would we have an active session
* which needs to be shut down. In the case of S4_IN_LOGIN we could
* transition to either S1_FREE in which case a shutdown message
* was sent to the session which in turn will reply with a shutdown
* response causing the conn_process to exit.
*/
if (c->c_state == S5_LOGGED_IN)
conn_state(c, T8);
/*
* If a msg_conn_lost was already sent it's invalid to reference
* the management queue from the connection structure at this point.
*/
util_title(mgmtq, Q_CONN_LOGIN, c->c_num, "End Poller");
if (pval == -1)
queue_message_set(c->c_dataq, 0, msg_conn_lost, 0);
return (NULL);
}
/*
* conn_process -- thread which runs a connection
*/
void *
conn_process(void *v)
{
iscsi_conn_t *c = (iscsi_conn_t *)v;
iscsi_cmd_t *cmd;
Boolean_t process = True,
is_last = False;
msg_t *m;
void *thr_status;
int i;
mgmt_request_t *mgmt;
char debug[80];
time_t tval = time((time_t *)0);
c->c_dataq = queue_alloc();
c->c_maxcmdsn = CMD_MAXOUTSTANDING;
if (sema_init(&c->c_datain, 0, USYNC_THREAD, NULL) != 0) {
port_conn_remove(c);
free(c);
return (NULL);
}
util_title(c->c_mgmtq, Q_CONN_LOGIN, c->c_num, "Start Receiver");
util_title(c->c_mgmtq, Q_CONN_LOGIN, c->c_num,
ctime_r(&tval, debug, sizeof (debug)));
(void) pthread_create(&c->c_thr_id_poller, NULL,
conn_poller, (void *)c);
c->c_thr_id_process = pthread_self();
assert(c->c_state == S1_FREE);
conn_state(c, T3);
do {
m = queue_message_get(c->c_dataq);
switch (m->msg_type) {
case msg_mgmt_rqst:
mgmt = (mgmt_request_t *)m->msg_data;
if (c->c_state == S5_LOGGED_IN) {
if (mgmt->m_request == mgmt_logout) {
conn_state(c, T11);
queue_message_set(mgmt->m_q, 0,
msg_mgmt_rply, 0);
} else {
queue_message_set(c->c_sessq, 0,
msg_mgmt_rqst, m->msg_data);
}
} else {
/*
* Corner case which can occur when the
* connection has just started and is in the
* process of logging in and we get a
* mangement request. There's no session
* information or even a queue setup. Just
* show an empty connection.
*
* For the mgmt_logout, it's possible that
* we sent the T11 state change causing the
* connection to enter the S7 state. If we
* get a logout request again the specification
* says to just drop the connection.
*/
if (mgmt->m_request == mgmt_logout)
conn_state(c, T18);
else {
(void) pthread_mutex_lock(
&mgmt->m_resp_mutex);
xml_add_tag(mgmt->m_u.m_resp,
"connection", NULL);
(void) pthread_mutex_unlock(
&mgmt->m_resp_mutex);
}
queue_message_set(mgmt->m_q, 0,
msg_mgmt_rply, 0);
}
m->msg_data = NULL;
break;
case msg_conn_lost:
queue_prt(c->c_mgmtq, Q_CONN_LOGIN,
"CON%x Shutdown: connection", c->c_num);
if (c->c_state == S5_LOGGED_IN)
conn_state(c, T8);
break;
case msg_shutdown_rsp:
if (c->c_state == S6_IN_LOGOUT)
conn_state(c, T13);
(void) pthread_join(c->c_thr_id_poller, &thr_status);
is_last = (Boolean_t)m->msg_data;
m->msg_data = NULL;
process = False;
break;
case msg_shutdown:
if (c->c_state == S5_LOGGED_IN) {
conn_state(c, T8);
} else if (c->c_state == S4_IN_LOGIN)
conn_state(c, T7);
else {
process = False;
}
break;
case msg_targ_inventory_change:
if (c->c_state == S5_LOGGED_IN) {
send_async_scsi(c, KEY_UNIT_ATTENTION, 0x3f,
0x0e);
}
break;
case msg_send_pkt:
iscsi_conn_pkt(c, (iscsi_rsp_hdr_t *)m->msg_data);
break;
case msg_cmd_data_rqst:
/*
* The STE needs more data to complete
* the write command.
*/
iscsi_conn_data_rqst((t10_cmd_t *)m->msg_data);
break;
case msg_cmd_data_in:
/*
* Data is available to satisfy the READ command
*/
iscsi_conn_data_in((t10_cmd_t *)m->msg_data);
break;
case msg_cmd_cmplt:
/*
* Status is available for a previous STEOut.
* The status may be good and the previous STEOut data
* wasn't sent so we phase collapse.
*/
iscsi_conn_cmdcmplt((t10_cmd_t *)m->msg_data);
break;
default:
queue_prt(c->c_mgmtq, Q_CONN_ERRS,
"CON%x Didn't handle msg_type %d", c->c_num,
m->msg_type);
break;
}
queue_message_free(m);
} while (process == True);
/*
* Free any resources used.
*/
if (c->c_text_area)
free(c->c_text_area);
if (c->c_fd != -1)
(void) close(c->c_fd);
/*
* It's possible, but very unlikely that c_sessq is NULL at this
* point. I saw one case where the system had problems causing the
* poller routine to exit real early so that the session was never
* setup causing the daemon to get a SEGV in queue_free when a NULL
* was passed in.
*/
if ((is_last == True) && (c->c_sessq != NULL))
queue_free(c->c_sessq, sess_queue_data_remove);
/*
* See if there are any commands outstanding and free them.
* NOTE: Should walk through the data_ptr list and find data structure
* who have alligence to this connection and free them as well.
*/
(void) pthread_mutex_lock(&c->c_mutex);
for (i = 0, cmd = c->c_cmd_head; cmd; i++)
cmd = cmd->c_next; /* debug count of lost ttt's */
(void) snprintf(debug, sizeof (debug), "CON%x %d Lost TTTs: ",
c->c_num, i);
for (i = 0, cmd = c->c_cmd_head; cmd; i++) {
iscsi_cmd_t *n = cmd->c_next;
if (cmd->c_state != CmdCanceled) {
(void) snprintf(debug + strlen(debug),
sizeof (debug) - strlen(debug),
"0x%x ", cmd->c_ttt);
}
free(cmd);
cmd = n;
}
(void) pthread_mutex_unlock(&c->c_mutex);
if (i) {
/*
* If there where any found send a message indicating
* which ones. This message is purely for information
* and is not indicative of an error.
*/
queue_prt(c->c_mgmtq, Q_CONN_LOGIN, debug);
}
if (c->c_cmds_avg_cnt != 0)
queue_prt(c->c_mgmtq, Q_CONN_LOGIN,
"CON%x Average completion %lldms", c->c_num,
(c->c_cmds_avg_sum / c->c_cmds_avg_cnt) / (1000 * 1000));
(void) sema_destroy(&c->c_datain);
if (c->c_targ_alias)
free(c->c_targ_alias);
util_title(c->c_mgmtq, Q_CONN_LOGIN, c->c_num, "End Receiver");
/*
* Remove this connection from linked list of current connections.
* This will also free the connection queue. Must not hold the
* q here because port_conn_remove-->queue_free->conn_queue_data
* will possible grab the mutex.
*/
port_conn_remove(c);
free(c);
return (NULL);
}
/*
* []----
* | iscsi_conn_pkt -- send out PDU from receive thread
* |
* | (1) This PDU could be either:
* | (a) A NOP request was sent from the initiator which the recieve
* | side processed and is requesting to be sent back.
* | (b) Nothing has been received in N seconds and we're looking
* | to see if the connection is still alive.
* | (c) A task management request was processed by the receive side
* | and the response must be sent.
* | (2) Fields to be filled in
* | Need to delay filling in several of the fields until
* | now to avoid using sequence number which would be out of
* | order.
* []----
*/
static void
iscsi_conn_pkt(iscsi_conn_t *c, iscsi_rsp_hdr_t *in)
{
if (c->c_state != S5_LOGGED_IN) {
free(in);
return;
}
(void) pthread_mutex_lock(&c->c_mutex);
in->statsn = htonl(c->c_statsn++);
(void) pthread_mutex_lock(&c->c_sess->s_mutex);
in->expcmdsn = htonl(c->c_sess->s_seencmdsn + 1);
in->maxcmdsn = htonl(iscsi_cmd_window(c) + c->c_sess->s_seencmdsn);
(void) pthread_mutex_unlock(&c->c_sess->s_mutex);
(void) pthread_mutex_unlock(&c->c_mutex);
send_iscsi_pkt(c, (iscsi_hdr_t *)in, 0);
free(in);
}
/*
* []----
* | iscsi_conn_data_rqst -- request that data be sent from the initiator
* []----
*/
static void
iscsi_conn_data_rqst(t10_cmd_t *t)
{
iscsi_cmd_t *cmd = T10_TRANS_ID(t);
iscsi_conn_t *c;
iscsi_rtt_hdr_t rtt;
bzero(&rtt, sizeof (rtt));
c = cmd->c_allegiance;
(void) pthread_mutex_lock(&c->c_mutex);
(void) pthread_mutex_lock(&c->c_state_mutex);
if ((c->c_state != S5_LOGGED_IN) ||
(cmd->c_state == CmdCanceled)) {
t10_cmd_state(t, T10_Cmd_Event_Release);
(void) pthread_mutex_unlock(&c->c_state_mutex);
(void) pthread_mutex_unlock(&c->c_mutex);
return;
}
(void) pthread_mutex_unlock(&c->c_state_mutex);
/*
* Save the data pointer from the emulation code. It's their
* responsibility to allocate space for the data which the
* initiator will return. When we receive a DATAOUT packet
* we'll copy data from the socket directly to this buffer.
*/
cmd->c_data = T10_DATA(t);
/*
* RFC3270.10.8.3
* The statsn field will contain the next statsn. The statsn for this
* connection is not advanced after this PDU is sent.
*/
rtt.statsn = htonl(c->c_statsn);
rtt.opcode = ISCSI_OP_RTT_RSP;
rtt.flags = ISCSI_FLAG_FINAL;
rtt.itt = cmd->c_itt;
rtt.ttt = cmd->c_ttt;
rtt.data_offset = htonl(T10_DATA_OFFSET(t));
rtt.data_length = htonl(T10_DATA_LEN(t));
(void) pthread_mutex_lock(&c->c_sess->s_mutex);
rtt.maxcmdsn = htonl(iscsi_cmd_window(c) + c->c_sess->s_seencmdsn);
rtt.expcmdsn = htonl(c->c_sess->s_seencmdsn + 1);
(void) pthread_mutex_unlock(&c->c_sess->s_mutex);
#ifdef FULL_DEBUG
queue_prt(c->c_mgmtq, Q_CONN_IO,
"CON%x TTT 0x%x R2T offset 0x%x, len 0x%x",
c->c_num, cmd->c_ttt, T10_DATA_OFFSET(t), T10_DATA_LEN(t));
#endif
t10_cmd_state(t, T10_Cmd_Event_DataOut_Sent);
(void) pthread_mutex_unlock(&c->c_mutex);
send_iscsi_pkt(c, (iscsi_hdr_t *)&rtt, 0);
}
/*
* []----
* | iscsi_conn_data_in -- Send data to initiator
* []----
*/
void
iscsi_conn_data_in(t10_cmd_t *t)
{
iscsi_cmd_t *cmd = (iscsi_cmd_t *)T10_TRANS_ID(t);
iscsi_conn_t *c;
c = cmd->c_allegiance;
(void) pthread_mutex_lock(&c->c_mutex);
(void) pthread_mutex_lock(&c->c_state_mutex);
if ((c->c_state != S5_LOGGED_IN) ||
(cmd->c_state == CmdCanceled)) {
t10_cmd_state(t, T10_Cmd_Event_Release);
while (cmd->c_t10_delayed) {
t10_cmd_state(cmd->c_t10_delayed->id_t10_cmd,
T10_Cmd_Event_Release);
iscsi_cmd_delayed_remove(cmd, cmd->c_t10_delayed);
}
(void) pthread_mutex_unlock(&c->c_state_mutex);
(void) pthread_mutex_unlock(&c->c_mutex);
return;
}
(void) pthread_mutex_unlock(&c->c_state_mutex);
/*
* Need to deal with out of order data PDUs. RFC3720 allows
* the initiator to indicate if it can handle out-of-order
* PDUs.
*/
if (cmd->c_offset_in != T10_DATA_OFFSET(t)) {
iscsi_cmd_delayed_store(cmd, t);
(void) pthread_mutex_unlock(&c->c_mutex);
return;
}
while (t != NULL) {
cmd->c_offset_in += T10_DATA_LEN(t);
if (T10_CMD_LAST(t) == True) {
send_datain_pdu(c, t,
ISCSI_FLAG_FINAL | ISCSI_FLAG_DATA_STATUS);
iscsi_cmd_free(c, cmd);
} else {
send_datain_pdu(c, t, 0);
}
t10_cmd_state(t, T10_Cmd_Event_Release);
cmd->c_t10_cmd = NULL;
if (cmd->c_t10_delayed &&
(cmd->c_t10_delayed->id_offset == cmd->c_offset_in)) {
t = cmd->c_t10_delayed->id_t10_cmd;
iscsi_cmd_delayed_remove(cmd, cmd->c_t10_delayed);
} else {
t = NULL;
}
}
(void) pthread_mutex_unlock(&c->c_mutex);
}
/*
* []----
* | iscsi_conn_cmdcmplt -- Send out appropriate completion PDU
* []----
*/
void
iscsi_conn_cmdcmplt(t10_cmd_t *t)
{
iscsi_cmd_t *cmd = (iscsi_cmd_t *)T10_TRANS_ID(t);
iscsi_conn_t *c;
c = cmd->c_allegiance;
(void) pthread_mutex_lock(&c->c_mutex);
(void) pthread_mutex_lock(&c->c_state_mutex);
if ((c->c_state != S5_LOGGED_IN) ||
(cmd->c_state == CmdCanceled)) {
t10_cmd_state(t, T10_Cmd_Event_Release);
(void) pthread_mutex_unlock(&c->c_state_mutex);
(void) pthread_mutex_unlock(&c->c_mutex);
return;
}
(void) pthread_mutex_unlock(&c->c_state_mutex);
if (T10_SENSE_LEN(t) || (T10_DATA(t) == 0)) {
/*
* If d_sense_len is set there's a problem and we need to send
* a SCSI response packet. Or if there's no data buffer then
* this is an acknowledgement that a SCSI Write completed
* successfully.
*/
send_scsi_rsp(c, t);
} else {
/*
* send data out with final bit. Last packet of a SCSI
* READ Op and we'll send it out with the final/status
* bits set.
*/
send_datain_pdu(c, t,
ISCSI_FLAG_FINAL | ISCSI_FLAG_DATA_STATUS);
}
t10_cmd_state(t, T10_Cmd_Event_Release);
cmd->c_t10_cmd = NULL;
if (cmd->c_scb_extended != NULL)
free(cmd->c_scb_extended);
iscsi_cmd_free(c, cmd);
(void) pthread_mutex_unlock(&c->c_mutex);
}
/*
* []----
* | send_datain_pdu -- Send DataIn PDU with READ data
* |
* | If this is the last read operation and it completed successfully
* | the final flag will be set along with the status bit which indicates
* | successful completion. This is known as a phase collapse for iSCSI.
* |
* | NOTE: connection mutex must be held.
* []----
*/
static void
send_datain_pdu(iscsi_conn_t *c, t10_cmd_t *t, uint8_t final_flag)
{
iscsi_cmd_t *cmd = (iscsi_cmd_t *)T10_TRANS_ID(t);
iscsi_data_rsp_hdr_t rsp;
assert(pthread_mutex_trylock(&c->c_mutex) != 0);
bzero(&rsp, sizeof (rsp));
rsp.opcode = ISCSI_OP_SCSI_DATA_RSP;
rsp.flags = final_flag;
rsp.cmd_status = cmd->c_status;
rsp.itt = cmd->c_itt;
rsp.ttt = ISCSI_RSVD_TASK_TAG;
rsp.datasn = htonl(cmd->c_datasn++);
rsp.offset = htonl(T10_DATA_OFFSET(t));
rsp.lun[1] = (uint8_t)cmd->c_lun;
hton24(rsp.dlength, T10_DATA_LEN(t));
rsp.statsn = htonl(c->c_statsn);
/*
* The statsn is only incremented when the Status bit is set
* for a DataIn PDU. This must be done *after* the value
* was stored in the PDU.
*/
if (final_flag & ISCSI_FLAG_DATA_STATUS)
c->c_statsn++;
(void) pthread_mutex_lock(&c->c_sess->s_mutex);
rsp.maxcmdsn = htonl(iscsi_cmd_window(c) + c->c_sess->s_seencmdsn);
rsp.expcmdsn = htonl(c->c_sess->s_seencmdsn);
(void) pthread_mutex_unlock(&c->c_sess->s_mutex);
send_iscsi_pkt(c, (iscsi_hdr_t *)&rsp, T10_DATA(t));
}
/*
* []----
* | send_scsi_rsp -- Send SCSI reponse PDU
* |
* | NOTE: connection mutex must be held.
* []----
*/
static void
send_scsi_rsp(iscsi_conn_t *c, t10_cmd_t *t)
{
iscsi_cmd_t *cmd = (iscsi_cmd_t *)T10_TRANS_ID(t);
iscsi_scsi_rsp_hdr_t rsp;
void *auto_sense = NULL;
assert(pthread_mutex_trylock(&c->c_mutex) != 0);
bzero(&rsp, sizeof (rsp));
rsp.opcode = ISCSI_OP_SCSI_RSP;
rsp.flags = ISCSI_FLAG_FINAL;
rsp.itt = cmd->c_itt;
rsp.statsn = htonl(c->c_statsn++);
(void) pthread_mutex_lock(&c->c_sess->s_mutex);
rsp.expcmdsn = htonl(c->c_sess->s_seencmdsn + 1);
rsp.maxcmdsn = htonl(iscsi_cmd_window(c) + c->c_sess->s_seencmdsn);
(void) pthread_mutex_unlock(&c->c_sess->s_mutex);
rsp.cmd_status = T10_CMD_STATUS(t);
if (rsp.cmd_status) {
rsp.response = ISCSI_STATUS_CMD_COMPLETED;
rsp.residual_count = htonl(T10_CMD_RESID(t));
if (cmd->c_writeop == True)
rsp.flags |= ISCSI_FLAG_CMD_OVERFLOW;
else
rsp.flags |= ISCSI_FLAG_CMD_UNDERFLOW;
if (T10_SENSE_LEN(t) != 0) {
/*
* Need to handle autosense stuff. The data should
* be store in the d_sense area
*/
auto_sense = (void *)T10_SENSE_DATA(t);
hton24(rsp.dlength, T10_SENSE_LEN(t));
}
queue_prt(c->c_mgmtq, Q_CONN_ERRS,
"CON%x LUN%d SCSI Error Status: %d",
c->c_num, t->c_lu->l_common->l_num, rsp.cmd_status);
} else {
rsp.response = ISCSI_STATUS_CMD_COMPLETED;
rsp.expdatasn = htonl(cmd->c_datasn);
}
send_iscsi_pkt(c, (iscsi_hdr_t *)&rsp, auto_sense);
}
static void
send_async_scsi(iscsi_conn_t *c, int key, int asc, int ascq)
{
iscsi_async_evt_hdr_t a;
struct scsi_extended_sense s;
char *buf;
bzero(&a, sizeof (a));
bzero(&s, sizeof (s));
s.es_class = CLASS_EXTENDED_SENSE;
s.es_code = CODE_FMT_FIXED_CURRENT;
s.es_key = key;
s.es_valid = 1;
s.es_add_code = asc;
s.es_qual_code = ascq;
if ((buf = malloc(sizeof (s) + 2)) == NULL)
return;
buf[0] = (sizeof (s) >> 8) & 0xff;
buf[1] = sizeof (s) & 0xff;
bcopy(&s, &buf[2], sizeof (s));
hton24(a.dlength, sizeof (s) + 2);
a.opcode = ISCSI_OP_ASYNC_EVENT;
a.flags = ISCSI_FLAG_FINAL;
a.async_event = ISCSI_ASYNC_EVENT_SCSI_EVENT;
(void) pthread_mutex_lock(&c->c_mutex);
a.statsn = htonl(c->c_statsn++);
(void) pthread_mutex_lock(&c->c_sess->s_mutex);
a.expcmdsn = htonl(c->c_sess->s_seencmdsn + 1);
a.maxcmdsn = htonl(iscsi_cmd_window(c) + c->c_sess->s_seencmdsn);
(void) pthread_mutex_unlock(&c->c_sess->s_mutex);
(void) pthread_mutex_unlock(&c->c_mutex);
queue_prt(c->c_mgmtq, Q_CONN_NONIO,
"CON%x Sending async scsi sense", c->c_num);
send_iscsi_pkt(c, (iscsi_hdr_t *)&a, buf);
}
/*
* []----
* | send_async_logout -- request logout from initiator
* []----
*/
static void
send_async_logout(iscsi_conn_t *c)
{
iscsi_async_evt_hdr_t a;
bzero(&a, sizeof (a));
a.opcode = ISCSI_OP_ASYNC_EVENT;
a.flags = ISCSI_FLAG_FINAL;
a.async_event = ISCSI_ASYNC_EVENT_REQUEST_LOGOUT;
(void) pthread_mutex_lock(&c->c_mutex);
a.statsn = htonl(c->c_statsn++);
(void) pthread_mutex_lock(&c->c_sess->s_mutex);
a.expcmdsn = htonl(c->c_sess->s_seencmdsn + 1);
a.maxcmdsn = htonl(iscsi_cmd_window(c) + c->c_sess->s_seencmdsn);
a.param3 = htons(ASYNC_LOGOUT_TIMEOUT);
a.rsvd4[0] = 0xff;
a.rsvd4[1] = 0xff; /* According to the spec these four */
a.rsvd4[2] = 0xff; /* values must be 0xff */
a.rsvd4[3] = 0xff;
(void) pthread_mutex_unlock(&c->c_sess->s_mutex);
(void) pthread_mutex_unlock(&c->c_mutex);
queue_prt(c->c_mgmtq, Q_CONN_NONIO,
"CON%x Sending async logout request", c->c_num);
send_iscsi_pkt(c, (iscsi_hdr_t *)&a, 0);
}
/*
* []----
* | queue_noop_in -- generate a NOP request and queue it to be sent.
* []----
*/
static void
queue_noop_in(iscsi_conn_t *c)
{
iscsi_nop_in_hdr_t *in;
iscsi_cmd_t *cmd = iscsi_cmd_alloc(c, ISCSI_OP_NOOP_IN);
if (cmd == NULL)
return;
in = (iscsi_nop_in_hdr_t *)calloc(sizeof (*in), 1);
if (in == NULL)
return;
in->opcode = ISCSI_OP_NOOP_IN | ISCSI_OP_IMMEDIATE;
in->flags = ISCSI_FLAG_FINAL;
in->ttt = cmd->c_ttt;
in->itt = ISCSI_RSVD_TASK_TAG;
iscsi_cmd_free(c, cmd);
queue_message_set(c->c_dataq, 0, msg_send_pkt, (void *)in);
}
void
iscsi_capacity_change(char *targ_name, int lun)
{
iscsi_conn_t *conn;
extern pthread_mutex_t port_mutex;
/*
* SBC-2 revision 16, section 4.6 -- Initialization
* Any time the parameter data returned by the READ CAPACITY(10)
* (see 5.10) or the READ CAPACITY(16) command (see 5.11) changes,
* the device server should establish a unit attention condition for
* the initiator port associated with each I_T nexus.
* Since the transport knows which initiators are currently accessing
* the target the message will be sent from here.
*/
(void) pthread_mutex_lock(&port_mutex);
for (conn = conn_head; conn; conn = conn->c_next) {
(void) pthread_mutex_lock(&conn->c_state_mutex);
if ((conn->c_state == S5_LOGGED_IN) &&
(conn->c_sess->s_type == SessionNormal) &&
(strcmp(conn->c_sess->s_t_name, targ_name) == 0)) {
queue_message_set(conn->c_sessq, 0,
msg_lu_capacity_change, (void *)(uintptr_t)lun);
}
(void) pthread_mutex_unlock(&conn->c_state_mutex);
}
(void) pthread_mutex_unlock(&port_mutex);
}
/*
* []----
* | iscsi_inventory_change -- Send notice to initiator that something changed.
* []----
*/
void
iscsi_inventory_change(char *targ_name)
{
iscsi_conn_t *c;
extern pthread_mutex_t port_mutex;
/*
* SPC-3 revision 21c, Section 6.21 REPORT_LUNS
* If the logical unit inventory changes for any reason
* (e.g. completion of initialization, removal of a logical unit,
* or create of a logical unit), then the device server shall generate
* a unit attention condition for all I_T nexuses, with the additional
* sense code set to REPORTED LUNS DATA HAS CHANGED.
*/
(void) pthread_mutex_lock(&port_mutex);
for (c = conn_head; c; c = c->c_next) {
(void) pthread_mutex_lock(&c->c_state_mutex);
if ((c->c_state == S5_LOGGED_IN) &&
(c->c_sess->s_type == SessionNormal) &&
(strcmp(c->c_sess->s_t_name, targ_name) == 0)) {
queue_prt(c->c_mgmtq, Q_CONN_NONIO,
"CON%x Sending Inventory change out", c->c_num);
/*
* Send a message indicating that the logical unit
* inventory has changed. 1) This message is sent
* to the session level which will pass it onto
* the SAM layer causing a UNIT_ATTENTION during
* the next command. 2) This message is also sent
* directly to the outgoing side of the connection
* which will send an asynchronous event message
* to the initiator.
*/
queue_message_set(c->c_sessq, 0,
msg_targ_inventory_change, 0);
queue_message_set(c->c_dataq, 0,
msg_targ_inventory_change, 0);
}
(void) pthread_mutex_unlock(&c->c_state_mutex);
}
(void) pthread_mutex_unlock(&port_mutex);
}
/*
* []----
* | state_to_str -- return string for given state, used for debug
* []----
*/
static char *
state_to_str(iscsi_state_t s)
{
switch (s) {
case S1_FREE: return ("FREE");
case S3_XPT_UP: return ("XPT_UP");
case S4_IN_LOGIN: return ("IN_LOGIN");
case S5_LOGGED_IN: return ("LOGGED_IN");
case S6_IN_LOGOUT: return ("IN_LOGOUT");
case S7_LOGOUT_REQUESTED: return ("LOGOUT_REQUEST");
case S8_CLEANUP_WAIT: return ("CLEANUP_WAIT");
}
return ("Unknown");
}
/*
* []----
* | event_to_str -- return string for given event, used for debug
* []----
*/
static char *
event_to_str(iscsi_transition_t t)
{
switch (t) {
case T3: return ("T3");
case T4: return ("T4");
case T5: return ("T5");
case T6: return ("T6");
case T7: return ("T7");
case T8: return ("T8");
case T9: return ("T9");
case T10: return ("T10");
case T11: return ("T11");
case T12: return ("T12");
case T13: return ("T13");
case T15: return ("T15");
case T16: return ("T16");
case T17: return ("T17");
case T18: return ("T18");
}
return ("Unknown");
}
/*
* []----
* | conn_state -- Attempt to change from one state to the next
* []----
*/
void
conn_state(iscsi_conn_t *c, iscsi_transition_t t)
{
iscsi_state_t old_state = c->c_state;
(void) pthread_mutex_lock(&c->c_state_mutex);
switch (c->c_state) {
case S1_FREE:
switch (t) {
case T3:
c->c_state = S3_XPT_UP;
break;
}
break;
case S3_XPT_UP:
switch (t) {
case T6:
c->c_state = S1_FREE;
break;
case T4:
c->c_statsn = 1;
c->c_state = S4_IN_LOGIN;
break;
}
break;
case S4_IN_LOGIN:
switch (t) {
case T7:
/*
* When there's a session a shutdown messages is
* sent giving the opportunity to free resources
* used by the session code and STE. Very early
* on a session might not exist when a failure
* occurs like getting a bad opcode. The connection
* process routine is going to sit around waiting
* for a message which will never come so fake
* a completion message here if there's no session.
*/
if (c->c_sessq == NULL) {
queue_message_set(c->c_dataq, 0,
msg_shutdown_rsp, (void *)True);
} else {
queue_message_set(c->c_sessq, 0, msg_shutdown,
(void *)c);
}
c->c_state = S1_FREE;
break;
case T5:
c->c_state = S5_LOGGED_IN;
if (strncmp(c->c_sess->s_i_name,
"iqn.1991-05.com.microsoft",
strlen("iqn.1991-05.com.microsoft")) == 0)
c->c_sess->s_cmdsn++;
break;
}
break;
case S5_LOGGED_IN:
switch (t) {
case T8:
queue_message_set(c->c_sessq, 0, msg_shutdown,
(void *)c);
c->c_state = S1_FREE;
break;
case T9:
queue_message_set(c->c_sessq, 0, msg_shutdown,
(void *)c);
c->c_state = S6_IN_LOGOUT;
break;
case T11:
c->c_state = S7_LOGOUT_REQUESTED;
send_async_logout(c);
break;
case T15:
c->c_state = S8_CLEANUP_WAIT;
break;
}
break;
case S6_IN_LOGOUT:
switch (t) {
case T13:
if (c->c_last_pkg) {
send_iscsi_pkt(c, c->c_last_pkg, NULL);
free(c->c_last_pkg);
}
c->c_state = S1_FREE;
break;
case T17:
c->c_state = S8_CLEANUP_WAIT;
break;
}
break;
case S7_LOGOUT_REQUESTED:
switch (t) {
case T18:
queue_message_set(c->c_sessq, 0, msg_shutdown,
(void *)c);
c->c_state = S1_FREE;
break;
case T10:
queue_message_set(c->c_sessq, 0, msg_shutdown,
(void *)c);
c->c_state = S6_IN_LOGOUT;
break;
case T12:
c->c_state = S7_LOGOUT_REQUESTED;
break;
case T16:
c->c_state = S8_CLEANUP_WAIT;
break;
}
break;
case S8_CLEANUP_WAIT:
default:
break;
}
queue_prt(c->c_mgmtq, Q_CONN_NONIO, "CON%x ---- %s(%s) -> %s",
c->c_num, state_to_str(old_state), event_to_str(t),
state_to_str(c->c_state));
(void) pthread_mutex_unlock(&c->c_state_mutex);
}
/*
* []----
* | send_iscsi_pkt -- output PDU header, data, and alignment bytes if needed
* |
* | NOTE: This routine may be called with the connection mutex held. This
* | is done to prevent a state change being made to a command pointer. This
* | routine is currently written so that it doesn't need to have this mutex
* | held or calls a routine which needs it to be held.
* []----
*/
void
send_iscsi_pkt(iscsi_conn_t *c, iscsi_hdr_t *h, char *opt_text)
{
int dlen = ntoh24(h->dlength),
pad_len;
uint32_t crc;
/*
* Sanity check. If there's a length in the header we must
* have text to send or if the length is zero there better not
* be any text.
*/
if (((dlen == 0) && (opt_text != NULL)) ||
((dlen != 0) && (opt_text == NULL)))
return;
if (write(c->c_fd, h, sizeof (*h)) < 0) {
if (errno == EPIPE) {
/*
* For some reason the initiator has closed the
* socket on us. This is most likely caused because
* of some network related condition
* (e.g. broken cable). We'll shutdown our side and
* wait for a reconnect from the initiator.
*/
queue_prt(c->c_mgmtq, Q_CONN_ERRS,
"CON%x iscsi_pkt -- initiator closed socket",
c->c_num);
} else {
/*
* This is not good.
*/
queue_prt(c->c_mgmtq, Q_CONN_ERRS,
"CON%x iscsi_pkt write failed, errno %d",
c->c_num, errno);
}
conn_state(c, T8);
return;
}
/*
* Only start generating digest values once we've completed the
* login phase. If the state is not checked here and during login
* header or data digests have been enabled we would generate
* a digest value during the Login RSP PDU which the initiator
* is not expecting.
*/
if ((c->c_state == S5_LOGGED_IN) && (c->c_header_digest == True)) {
crc = iscsi_crc32c((void *)h, sizeof (*h));
if (write(c->c_fd, &crc, sizeof (crc)) != sizeof (crc)) {
conn_state(c, T8);
return;
}
}
if (dlen) {
if (write(c->c_fd, opt_text, dlen) != dlen) {
conn_state(c, T8);
return;
}
/*
* Find out how many pad bytes we need to send out.
*/
pad_len = (ISCSI_PAD_WORD_LEN -
(dlen & (ISCSI_PAD_WORD_LEN - 1))) &
(ISCSI_PAD_WORD_LEN - 1);
if (pad_len) {
if (write(c->c_fd, pad_text, pad_len) != pad_len) {
conn_state(c, T8);
return;
}
}
if ((c->c_state == S5_LOGGED_IN) &&
(c->c_data_digest == True)) {
crc = iscsi_crc32c((void *)opt_text,
(unsigned long)dlen);
/*
* Include the pad information in the calculation of
* the CRC for the data.
*/
crc = iscsi_crc32c_continued((void *)pad_text,
(unsigned long)pad_len, crc);
if (write(c->c_fd, &crc, sizeof (crc)) !=
sizeof (crc)) {
conn_state(c, T8);
return;
}
}
}
#ifdef FULL_DEBUG
if (dlen != 0) {
queue_prt(c->c_mgmtq, Q_CONN_IO,
"CON%x Response(0x%x), Data: len=%d addr=0x%llx",
c->c_num, h->opcode, dlen, opt_text);
}
#endif
}