#

# Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.

#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

# DO NOT EDIT -- this file is generated by the Event Registry.

#

#

# code: STORAGE-8000-1Q

# keys: fault.config.fan-fail

#

msgid "STORAGE-8000-1Q.type"

msgstr "Fault"

msgid "STORAGE-8000-1Q.severity"

msgstr "Critical"

msgid "STORAGE-8000-1Q.description"

msgstr "The minimum number of required fan trays (3) were not detected.\n"

msgid "STORAGE-8000-1Q.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-1Q.impact"

msgstr "The SAS fabric is down, and user data storage is unavailable until the configuration problem is resolved.\n"

msgid "STORAGE-8000-1Q.action"

msgstr "Check that the minimum required number of components are configured.\n"

#

# code: STORAGE-8000-24

# keys: fault.config.psu-fail

#

msgid "STORAGE-8000-24.type"

msgstr "Fault"

msgid "STORAGE-8000-24.severity"

msgstr "Critical"

msgid "STORAGE-8000-24.description"

msgstr "The minimum number of required power supplies (3) were not detected.\n"

msgid "STORAGE-8000-24.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-24.impact"

msgstr "The SAS fabric is down, and user data storage is unavailable until the configuration problem is resolved.\n"

msgid "STORAGE-8000-24.action"

msgstr "Check that the minimum required number of components are configured.\n"

#

# code: STORAGE-8000-3R

# keys: fault.device.controller.fail

#

msgid "STORAGE-8000-3R.type"

msgstr "Fault"

msgid "STORAGE-8000-3R.severity"

msgstr "Major"

msgid "STORAGE-8000-3R.description"

msgstr "A Controller failed.\n"

msgid "STORAGE-8000-3R.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-3R.impact"

msgstr "The SAS fabric may be in a degraded state.\n"

msgid "STORAGE-8000-3R.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-42

# keys: fault.device.ethernet.fail

#

msgid "STORAGE-8000-42.type"

msgstr "Fault"

msgid "STORAGE-8000-42.severity"

msgstr "Major"

msgid "STORAGE-8000-42.description"

msgstr "An ethernet device failed.\n"

msgid "STORAGE-8000-42.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-42.impact"

msgstr "The SAS fabric may be in a degraded state. User data storage is still available.\n"

msgid "STORAGE-8000-42.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-5X

# keys: fault.device.fan.fail

#

msgid "STORAGE-8000-5X.type"

msgstr "Fault"

msgid "STORAGE-8000-5X.severity"

msgstr "Major"

msgid "STORAGE-8000-5X.description"

msgstr "A fan is no longer operating correctly.\n"

msgid "STORAGE-8000-5X.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-5X.impact"

msgstr "The enclosure may be getting inadequate cooling. If the problem persists, components may overheat and the enclosure may shutdown.\n"

msgid "STORAGE-8000-5X.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-6E

# keys: fault.device.psu.fail

#

msgid "STORAGE-8000-6E.type"

msgstr "Fault"

msgid "STORAGE-8000-6E.severity"

msgstr "Major"

msgid "STORAGE-8000-6E.description"

msgstr "A power supply is no longer operating correctly.\n"

msgid "STORAGE-8000-6E.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-6E.impact"

msgstr "The enclosure may not be getting adequate power. Subsequent loss of power supplies may cause the enclosure to shutdown.\n"

msgid "STORAGE-8000-6E.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-7J

# keys: fault.device.sas-expander.fail

#

msgid "STORAGE-8000-7J.type"

msgstr "Fault"

msgid "STORAGE-8000-7J.severity"

msgstr "Major"

msgid "STORAGE-8000-7J.description"

msgstr "A SAS expander is not functioning properly.\n"

msgid "STORAGE-8000-7J.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-7J.impact"

msgstr "The SAS fabric is in a degraded state. User data storage is still available.\n"

msgid "STORAGE-8000-7J.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-8S

# keys: fault.device.unusable-chassis-id

#

msgid "STORAGE-8000-8S.type"

msgstr "Fault"

msgid "STORAGE-8000-8S.severity"

msgstr "Critical"

msgid "STORAGE-8000-8S.description"

msgstr "The chassis ID was determined to be unusable.\n"

msgid "STORAGE-8000-8S.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-8S.impact"

msgstr "The SAS fabric is down, and user data storage is unavailable.\n"

msgid "STORAGE-8000-8S.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-95

# keys: fault.io.i2c.fail

#

msgid "STORAGE-8000-95.type"

msgstr "Fault"

msgid "STORAGE-8000-95.severity"

msgstr "Critical"

msgid "STORAGE-8000-95.description"

msgstr "An I2C bus failure has occurred.\n"

msgid "STORAGE-8000-95.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-95.impact"

msgstr "The system is in an unknown state.\n"

msgid "STORAGE-8000-95.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-AP

# keys: fault.io.i2c.poweron-fail

#

msgid "STORAGE-8000-AP.type"

msgstr "Fault"

msgid "STORAGE-8000-AP.severity"

msgstr "Critical"

msgid "STORAGE-8000-AP.description"

msgstr "An I2C bus failure has occurred during power-on.\n"

msgid "STORAGE-8000-AP.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-AP.impact"

msgstr "The system is in an unknown state.\n"

msgid "STORAGE-8000-AP.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-CA

# keys: fault.io.sas.log.non-fatal

#

msgid "STORAGE-8000-CA.type"

msgstr "Fault"

msgid "STORAGE-8000-CA.severity"

msgstr "Major"

msgid "STORAGE-8000-CA.description"

msgstr "A SAS expander log failure has occurred.\n"

msgid "STORAGE-8000-CA.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-CA.impact"

msgstr "The system is in an unknown state.\n"

msgid "STORAGE-8000-CA.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-DH

# keys: fault.io.sas.log.fatal

#

msgid "STORAGE-8000-DH.type"

msgstr "Fault"

msgid "STORAGE-8000-DH.severity"

msgstr "Critical"

msgid "STORAGE-8000-DH.description"

msgstr "A SAS expander log failure has occurred.\n"

msgid "STORAGE-8000-DH.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-DH.impact"

msgstr "The system is in an unknown state.\n"

msgid "STORAGE-8000-DH.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-ED

# keys: fault.power.fail

#

msgid "STORAGE-8000-ED.type"

msgstr "Fault"

msgid "STORAGE-8000-ED.severity"

msgstr "Major"

msgid "STORAGE-8000-ED.description"

msgstr "A power failure has occurred.\n"

msgid "STORAGE-8000-ED.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-ED.impact"

msgstr "A device in the enclosure may be getting inadequate power. Subsequent loss of the device may force the enclosure to shutdown.\n"

msgid "STORAGE-8000-ED.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-FY

# keys: fault.power.ext-fail

#

msgid "STORAGE-8000-FY.type"

msgstr "Fault"

msgid "STORAGE-8000-FY.severity"

msgstr "Major"

msgid "STORAGE-8000-FY.description"

msgstr "A power failure external to the enclosure has occurred.\n"

msgid "STORAGE-8000-FY.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-FY.impact"

msgstr "The enclosure may not be getting adequate power. Subsequent loss of power supplies may cause the enclosure to shutdown.\n"

msgid "STORAGE-8000-FY.action"

msgstr "Check that external AC power is available and that all the power cords are properly plugged into the enclosure power supplies.\n"

#

# code: STORAGE-8000-G3

# keys: fault.sensor.read-fail

#

msgid "STORAGE-8000-G3.type"

msgstr "Fault"

msgid "STORAGE-8000-G3.severity"

msgstr "Major"

msgid "STORAGE-8000-G3.description"

msgstr "An attempt to read a sensor failed.\n"

msgid "STORAGE-8000-G3.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-G3.impact"

msgstr "The system is in an unknown state.\n"

msgid "STORAGE-8000-G3.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-HR

# keys: fault.sp.fail

#

msgid "STORAGE-8000-HR.type"

msgstr "Fault"

msgid "STORAGE-8000-HR.severity"

msgstr "Critical"

msgid "STORAGE-8000-HR.description"

msgstr "A Service Processor failed.\n"

msgid "STORAGE-8000-HR.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-HR.impact"

msgstr "The SAS fabric may be in a degraded state.\n"

msgid "STORAGE-8000-HR.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-J4

# keys: fault.sp.unavailable

#

msgid "STORAGE-8000-J4.type"

msgstr "Fault"

msgid "STORAGE-8000-J4.severity"

msgstr "Major"

msgid "STORAGE-8000-J4.description"

msgstr "A Service Processor has detected that its peer is no longer available.\n"

msgid "STORAGE-8000-J4.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-J4.impact"

msgstr "A Root Controller Card failed and redundancy has been lost. The SAS fabric is in a degraded state. User data storage is still available.\n"

msgid "STORAGE-8000-J4.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-KQ

# keys: fault.sp.svc-fail

#

msgid "STORAGE-8000-KQ.type"

msgstr "Fault"

msgid "STORAGE-8000-KQ.severity"

msgstr "Major"

msgid "STORAGE-8000-KQ.description"

msgstr "A Service Processor service failure has occurred.\n"

msgid "STORAGE-8000-KQ.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-KQ.impact"

msgstr "The SAS fabric may be in a degraded state. User data storage is still available.\n"

msgid "STORAGE-8000-KQ.action"

msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n"

#

# code: STORAGE-8000-LC

# keys: fault.temp.fail

#

msgid "STORAGE-8000-LC.type"

msgstr "Fault"

msgid "STORAGE-8000-LC.severity"

msgstr "Major"

msgid "STORAGE-8000-LC.description"

msgstr "Ambient temperature is outside of normal operating range.\n"

msgid "STORAGE-8000-LC.response"

msgstr "The service required LED on the enclosure will be illuminated.\n"

msgid "STORAGE-8000-LC.impact"

msgstr "A device in the enclosure may be overheating. Subsequent loss of the device may force the enclosure to shutdown.\n"

msgid "STORAGE-8000-LC.action"

msgstr "Check that the ambient temperature is adequately cool, and none of the enclosure air inlets are blocked.\n"