cmd-inet/usr.sbin/Makefile

	Makefile revision c2785286330b58810071fc24f6ca69f401682dff
6253N/A#
6238N/A# CDDL HEADER START
6238N/A#
6253N/A# The contents of this file are subject to the terms of the
6253N/A# Common Development and Distribution License (the "License").
6253N/A# You may not use this file except in compliance with the License.
6253N/A#
6253N/A# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
6253N/A# or http://www.opensolaris.org/os/licensing.
6253N/A# See the License for the specific language governing permissions
6253N/A# and limitations under the License.
6253N/A#
6253N/A# When distributing Covered Code, include this CDDL HEADER in each
6330N/A# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
6253N/A# If applicable, add the following below this CDDL HEADER, with the
6253N/A# fields enclosed by brackets "[]" replaced with your own identifying
6279N/A# information: Portions Copyright [yyyy] [name of copyright owner]
6253N/A#
6253N/A# CDDL HEADER END
6253N/A#
6253N/A
6279N/A#
6279N/A# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
6279N/A# Use is subject to license terms.
6253N/A#
6253N/A# ident "%Z%%M% %I% %E% SMI"
6253N/A#
6253N/A
6253N/ASYNCPROG=   syncinit syncloop syncstat
6253N/ADHCPPROG=   dhcpconfig dhtadm pntadm
6253N/A
6253N/A# EXPORT DELETE START
6253N/AXMODPROG=   wanbootutil
6330N/A# EXPORT DELETE END
6253N/A
6253N/APROG=       6to4relay arp gettable if_mpadm \
6253N/A        in.comsat in.fingerd in.rarpd in.rexecd in.rlogind \
6253N/A        in.rshd in.rwhod in.telnetd in.tftpd ipaddrsel \
6253N/A        ndd $(SYNCPROG) $(DHCPPROG) $(XMODPROG)
6294N/A
6294N/AMANIFEST=   rarp.xml telnet.xml comsat.xml finger.xml \
6253N/A        login.xml shell.xml rexec.xml
6253N/A
6238N/AROOTFS_PROG=    hostconfig route soconfig
6238N/ASBINLINKS=  hostconfig route

RPCSVCPROG= hostconfig
AUDITPROG=  in.rexecd in.rlogind in.rshd in.telnetd
PAMPROG=    in.rexecd in.rlogind in.rshd in.telnetd
SOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \
        in.fingerd in.rarpd in.rexecd in.rlogind in.rshd \
        in.rwhod in.telnetd in.tftpd ipaddrsel route
NSLPROG=    6to4relay arp gettable hostconfig in.comsat in.rarpd \
        in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \
        in.tftpd ipaddrsel route
CMDPROG=    in.telnetd
K5PROGS=    in.telnetd in.rlogind in.rshd
TSNETPROG=  route
DEFAULTFILES=   telnetd.dfl

PROGSRCS=   $(PROG:%=%.c)
TFTPDOBJS=  in.tftpd.o tftpsubs.o
OTHERSRC=   ../usr.bin/tftp/tftpsubs.c
K5RLOGINOBJS=   in.rlogind.o
K5RSHDOBJS= in.rshd.o
K5TELNETOBJS=   in.telnetd.o
SRCS=       $(PROGSRCS) $(OTHERSRC)

SUBDIRS=    bootconfchk htable ifconfig in.ftpd in.rdisc in.routed \
        in.talkd inetadm inetconv ipqosconf kssl/kssladm kssl/ksslcfg \
        ping routeadm snoop sppptun traceroute wificonfig ipsecutils

MSGSUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed in.talkd inetadm \
        inetconv ipqosconf kssl/ksslcfg routeadm sppptun snoop \
        wificonfig

# As programs get lint-clean, add them here and to the 'lint' target.
# Eventually this hack should go away, and all in PROG should be
# lint-clean.
LINTCLEAN=  6to4relay arp in.rlogind in.rshd in.telnetd in.tftpd \
        ipaddrsel route \
        in.rarpd if_mpadm $(SYNCPROG)
# Likewise, as subdirs get lint-clean, add them here.  Once
# they're all clean, replace the dependency of the lint target
# with SUBDIRS.  Also (sigh) deal with the commented-out build lines
# for the lint rule.
LINTSUBDIRS=    bootconfchk in.rdisc in.routed in.talkd inetadm inetconv \
        ipqosconf ping routeadm sppptun traceroute wificonfig ipsecutils
# And as programs are verified not to attempt to write into constants,
# -xstrconst should be used to ensure they stay that way.
CONSTCLEAN=

include ../../Makefile.cmd
ROOTMANIFESTDIR=    $(ROOTSVCNETWORK)
$(ROOTMANIFEST)     := FILEMODE= 444
include ../Makefile.cmd-inet

ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%)
ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%)

COMMONOBJS= addr_match.o kcmd.o store_forw_creds.o
COMMONSRCS= $(COMMONOBJS:%.o=$(CMDINETCOMMONDIR)/%.c)
SRCS+=      $(COMMONSRCS)

#
# Message catalog
#
POFILES=    6to4relay.po if_mpadm.po in.comsat.po ipaddrsel.po route.po
POFILE=     usr.sbin.po

all:=       TARGET= all
install:=   TARGET= install
clean:=     TARGET= clean
clobber:=   TARGET= clobber
lint:=      TARGET= lint
_msg:=      TARGET= _msg

CLOBBERFILES += $(ROOTFS_PROG) $(PROG)
CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS)

CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I

include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
K5LIBS=

# Eventually just plain CFLAGS should be += -v, but not until all in
# PROGS are lint clean.
$(LINTCLEAN)        :=  CFLAGS += $(CCVERBOSE)
$(CONSTCLEAN)       :=  CFLAGS += $(XSTRCONST)

$(SYNCPROG)     :=  LDLIBS += -ldlpi
$(SOCKETPROG)       :=  LDLIBS += -lsocket
$(NSLPROG)      :=  LDLIBS += -lnsl
$(AUDITPROG)        :=  LDLIBS += -lbsm
$(PAMPROG)      :=  LDLIBS += -lpam
$(RPCSVCPROG)       :=  LDLIBS += -lrpcsvc
$(K5PROGS)      :=  LDFLAGS += $(KRUNPATH) \
                -L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL)
$(K5PROGS)      :=  K5LIBS=  -lmech_krb5
$(K5PROGS)      :=  CPPFLAGS += -I$(SRC)/head \
                -I$(SRC)/uts/common/ \
                -I$(SRC)/uts/common/gssapi/mechs/krb5/include \
                -I$(SRC)/lib/gss_mechs/mech_krb5/include \
                -I$(SRC)/lib/pam_modules/krb5
LDLIBS +=   $(K5LIBS)
$(TSNETPROG)        :=  LDLIBS += -ltsnet

in.rarpd        :=  LDLIBS += -linetutil -ldlpi
route           :=  CPPFLAGS += -DNDEBUG
ndd         :=  LDLIBS += -ldladm
gettable in.comsat  :=  LDFLAGS += $(MAPFILE.NGB:%=-M%)

.KEEP_STATE:

.PARALLEL:

all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) THIRDPARTYLICENSE.arp

#
# message catalog
#
_msg: $(MSGSUBDIRS) $(POFILE)

syncutil: $(SYNCPROG)

$(POFILE): $(POFILES)
    $(RM) $@
    cat $(POFILES) > $@

%.o: $(CMDINETCOMMONDIR)/%.c
    $(COMPILE.c) -o $@ $<

in.telnetd: $(K5TELNETOBJS)
    $(LINK.c) $(K5TELNETOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS)
    $(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

in.rshd: $(K5RSHDOBJS) $(COMMONOBJS)
    $(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

in.tftpd: $(TFTPDOBJS)
    $(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

tftpsubs.o: $(OTHERSRC)
    $(COMPILE.c) $(OTHERSRC) -o $@
    $(POST_PROCESS_O)

$(ROOTUSRSBINLINKS):
    -$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@

install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \
    $(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \
    $(ROOTMANIFEST) THIRDPARTYLICENSE.arp

THIRDPARTYLICENSE.arp: arp.c
    $(SED) -n '/University of California/,/SUCH DAMAGE/p' arp.c > $@

CLOBBERFILES += THIRDPARTYLICENSE.arp

#
# The reason this rule checks for the existence of the
# Makefile is that some of the directories do not exist
# in our exportable source builds.
#
$(SUBDIRS): FRC
    @if [ -f $@/Makefile  ]; then \
        cd $@; pwd; $(MAKE) $(TARGET); \
    else \
        true; \
    fi

FRC:

check:  $(CHKMANIFEST)

clean:  $(SUBDIRS)
    -$(RM) $(CLEANFILES)

clobber: $(SUBDIRS)
    -$(RM) $(CLEANFILES) $(CLOBBERFILES)

lint: $(LINTSUBDIRS)
    $(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl
    $(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl
    @# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam
    $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
        -I$(SRC)/head -I$(SRC)/uts/common/ \
        -I$(SRC)/uts/common/gssapi/mechs/krb5/include \
        -I$(SRC)/lib/gss_mechs/mech_krb5/include \
        -I$(SRC)/lib/pam_modules/krb5 \
        in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
    $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
        -I$(SRC)/head -I$(SRC)/uts/common/ \
        -I$(SRC)/uts/common/gssapi/mechs/krb5/include \
        -I$(SRC)/lib/gss_mechs/mech_krb5/include \
        -I$(SRC)/lib/pam_modules/krb5 \
        in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
    $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \
        -erroff=E_GLOBAL_COULD_BE_STATIC2 \
        -I$(SRC)/head -I$(SRC)/uts/common/ \
        -I$(SRC)/uts/common/gssapi/mechs/krb5/include \
        -I$(SRC)/lib/gss_mechs/mech_krb5/include \
        -I$(SRC)/lib/pam_modules/krb5 \
        in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl
    $(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp
    $(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl
    $(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet
    $(LINT.c) syncinit.c $(LDLIBS) -ldlpi
    $(LINT.c) syncloop.c $(LDLIBS) -ldlpi
    $(LINT.c) syncstat.c $(LDLIBS) -ldlpi
    $(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \
        -lsocket -lnsl
    $(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \
        -lsocket -lnsl

# EXPORT DELETE START
EXPORT_SRC:
    $(RM) Makefile+
    sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
        < Makefile > Makefile+
    $(RM) Makefile
    $(MV) Makefile+ Makefile
    $(CHMOD) 444 Makefile
# EXPORT DELETE END