Makefile revision 67e3a03ed4a2813074d36330f062ed6e593a4937
3860N/A#
3860N/A# CDDL HEADER START
3860N/A#
3860N/A# The contents of this file are subject to the terms of the
3860N/A# Common Development and Distribution License (the "License").
3860N/A# You may not use this file except in compliance with the License.
3860N/A#
3860N/A# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
3860N/A# or http://www.opensolaris.org/os/licensing.
3860N/A# See the License for the specific language governing permissions
3860N/A# and limitations under the License.
3860N/A#
3860N/A# When distributing Covered Code, include this CDDL HEADER in each
3860N/A# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
3860N/A# If applicable, add the following below this CDDL HEADER, with the
3860N/A# fields enclosed by brackets "[]" replaced with your own identifying
3860N/A# information: Portions Copyright [yyyy] [name of copyright owner]
3860N/A#
3860N/A# CDDL HEADER END
3860N/A#
3860N/A
3860N/A#
3860N/A# Copyright 2008 Sun Microsystems, Inc. All rights reserved.
3860N/A# Use is subject to license terms.
3860N/A#
3860N/A# ident "%Z%%M% %I% %E% SMI"
3860N/A#
3860N/A
3860N/ASYNCPROG= syncinit syncloop syncstat
3860N/ADHCPPROG= dhcpconfig dhtadm pntadm
3860N/A
3860N/A# EXPORT DELETE START
3860N/AXMODPROG= wanbootutil
3860N/A# EXPORT DELETE END
3860N/A
3860N/APROG= 6to4relay arp gettable if_mpadm \
3860N/A in.comsat in.fingerd in.rarpd in.rexecd in.rlogind \
3860N/A in.rshd in.rwhod in.telnetd in.tftpd ipaddrsel \
3860N/A ndd $(SYNCPROG) $(DHCPPROG) $(XMODPROG)
3860N/A
3860N/AMANIFEST= rarp.xml telnet.xml comsat.xml finger.xml \
3860N/A login.xml shell.xml rexec.xml
3860N/A
3860N/AROOTFS_PROG= hostconfig route soconfig
3860N/ASBINLINKS= hostconfig route
3860N/A
3860N/ARPCSVCPROG= hostconfig
3860N/AAUDITPROG= in.rexecd in.rlogind in.rshd in.telnetd
3860N/APAMPROG= in.rexecd in.rlogind in.rshd in.telnetd
3860N/ASOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \
3860N/A in.fingerd in.rarpd in.rexecd in.rlogind in.rshd \
3860N/A in.rwhod in.telnetd in.tftpd ipaddrsel route
3860N/ANSLPROG= 6to4relay arp gettable hostconfig in.comsat in.rarpd \
3860N/A in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \
3860N/A in.tftpd ipaddrsel route
3860N/ACMDPROG= in.telnetd
3860N/AK5PROGS= in.telnetd in.rlogind in.rshd
3860N/ATSNETPROG= route
3860N/ADEFAULTFILES= telnetd.dfl
3860N/A
3860N/APROGSRCS= $(PROG:%=%.c)
3860N/ATFTPDOBJS= in.tftpd.o tftpsubs.o
3860N/AOTHERSRC= ../usr.bin/tftp/tftpsubs.c
3860N/AK5RLOGINOBJS= in.rlogind.o
3860N/AK5RSHDOBJS= in.rshd.o
3860N/AK5TELNETOBJS= in.telnetd.o
3860N/ASRCS= $(PROGSRCS) $(OTHERSRC)
3860N/A
SUBDIRS= bootconfchk htable ifconfig in.ftpd in.rdisc in.routed \
in.talkd inetadm inetconv ipqosconf kssl/kssladm kssl/ksslcfg \
ping routeadm snoop sppptun traceroute wificonfig ipsecutils
MSGSUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed in.talkd inetadm \
inetconv ipqosconf kssl/ksslcfg routeadm sppptun snoop \
wificonfig
# As programs get lint-clean, add them here and to the 'lint' target.
# Eventually this hack should go away, and all in PROG should be
# lint-clean.
LINTCLEAN= 6to4relay arp in.rlogind in.rshd in.telnetd in.tftpd \
ipaddrsel route \
in.rarpd if_mpadm $(SYNCPROG)
# Likewise, as subdirs get lint-clean, add them here. Once
# they're all clean, replace the dependency of the lint target
# with SUBDIRS. Also (sigh) deal with the commented-out build lines
# for the lint rule.
LINTSUBDIRS= bootconfchk in.rdisc in.routed in.talkd inetadm inetconv \
ipqosconf ping routeadm sppptun traceroute wificonfig ipsecutils
# And as programs are verified not to attempt to write into constants,
# -xstrconst should be used to ensure they stay that way.
CONSTCLEAN=
include ../../Makefile.cmd
ROOTMANIFESTDIR= $(ROOTSVCNETWORK)
$(ROOTMANIFEST) := FILEMODE= 444
include ../Makefile.cmd-inet
ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%)
ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%)
KWARN_OBJS = kwarnd_clnt_stubs.o kwarnd_clnt.o kwarnd_handle.o kwarnd_xdr.o
KWARN_SRC = $(KWARN_OBJS:%.o=%.c)
KWARN_SRC += kwarnd.h
kwarnd.h: $(SRC)/cmd/krb5/kwarn/kwarnd.x
$(RM) $@
$(RPCGEN) -M -h $(SRC)/cmd/krb5/kwarn/kwarnd.x | \
$(SED) -e 's!$(SRC)/cmd/krb5/kwarn/kwarnd.h!kwarnd.h!' > $@
kwarnd_xdr.c: kwarnd.h $(SRC)/cmd/krb5/kwarn/kwarnd.x
$(RM) $@
$(RPCGEN) -M -c $(SRC)/cmd/krb5/kwarn/kwarnd.x | \
$(SED) -e 's!$(SRC)/cmd/krb5/kwarn/kwarnd.h!kwarnd.h!' > $@
kwarnd_clnt.c: kwarnd.h $(SRC)/cmd/krb5/kwarn/kwarnd.x
$(RM) $@
$(RPCGEN) -M -l $(SRC)/cmd/krb5/kwarn/kwarnd.x | \
$(SED) -e 's!$(SRC)/cmd/krb5/kwarn/kwarnd.h!kwarnd.h!' > $@
kwarnd_clnt_stubs.c: kwarnd.h $(SRC)/cmd/krb5/kwarn/kwarnd_clnt_stubs.c
$(RM) $@
$(CP) $(SRC)/cmd/krb5/kwarn/kwarnd_clnt_stubs.c $@
kwarnd_handle.c: $(SRC)/cmd/krb5/kwarn/kwarnd_handle.c
$(RM) $@
$(CP) $(SRC)/cmd/krb5/kwarn/kwarnd_handle.c $@
COMMONOBJS= addr_match.o kcmd.o store_forw_creds.o
COMMONSRCS= $(COMMONOBJS:%.o=$(CMDINETCOMMONDIR)/%.c)
SRCS+= $(COMMONSRCS)
#
# Message catalog
#
POFILES= 6to4relay.po if_mpadm.po in.comsat.po ipaddrsel.po route.po
POFILE= usr.sbin.po
all:= TARGET= all
install:= TARGET= install
clean:= TARGET= clean
clobber:= TARGET= clobber
lint:= TARGET= lint
_msg:= TARGET= _msg
CLOBBERFILES += $(ROOTFS_PROG) $(PROG) $(KWARN_SRC)
CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS)
CLEANFILES += $(KWARN_OBJS)
CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I
include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
K5LIBS=
# Eventually just plain CFLAGS should be += -v, but not until all in
# PROGS are lint clean.
$(LINTCLEAN) := CFLAGS += $(CCVERBOSE)
$(CONSTCLEAN) := CFLAGS += $(XSTRCONST)
$(SYNCPROG) := LDLIBS += -ldlpi
$(SOCKETPROG) := LDLIBS += -lsocket
$(NSLPROG) := LDLIBS += -lnsl
$(AUDITPROG) := LDLIBS += -lbsm
$(PAMPROG) := LDLIBS += -lpam
$(RPCSVCPROG) := LDLIBS += -lrpcsvc
$(K5PROGS) := LDFLAGS += $(KRUNPATH) \
-L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL)
$(K5PROGS) := K5LIBS= -lmech_krb5
$(K5PROGS) := CPPFLAGS += -I$(SRC)/head \
-I$(SRC)/uts/common/ \
-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
-I$(SRC)/lib/gss_mechs/mech_krb5/include \
-I$(SRC)/lib/pam_modules/krb5
LDLIBS += $(K5LIBS)
$(TSNETPROG) := LDLIBS += -ltsnet
in.rarpd := LDLIBS += -linetutil -ldlpi
route := CPPFLAGS += -DNDEBUG
ndd := LDLIBS += -ldladm
gettable in.comsat := LDFLAGS += $(MAPFILE.NGB:%=-M%)
.KEEP_STATE:
.PARALLEL:
all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) THIRDPARTYLICENSE.arp
#
# message catalog
#
_msg: $(MSGSUBDIRS) $(POFILE)
syncutil: $(SYNCPROG)
$(POFILE): $(POFILES)
$(RM) $@
cat $(POFILES) > $@
%.o: $(CMDINETCOMMONDIR)/%.c
$(COMPILE.c) -o $@ $<
in.telnetd: $(K5TELNETOBJS) $(KWARN_OBJS)
$(LINK.c) $(K5TELNETOBJS) $(KWARN_OBJS) -o $@ $(LDLIBS)
$(POST_PROCESS)
in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS) $(KWARN_OBJS)
$(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) $(KWARN_OBJS) -o $@ $(LDLIBS)
$(POST_PROCESS)
in.rshd: $(K5RSHDOBJS) $(COMMONOBJS) $(KWARN_OBJS)
$(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) $(KWARN_OBJS) -o $@ $(LDLIBS)
$(POST_PROCESS)
in.tftpd: $(TFTPDOBJS)
$(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS)
$(POST_PROCESS)
tftpsubs.o: $(OTHERSRC)
$(COMPILE.c) $(OTHERSRC) -o $@
$(POST_PROCESS_O)
$(ROOTUSRSBINLINKS):
-$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@
install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \
$(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \
$(ROOTMANIFEST) THIRDPARTYLICENSE.arp
THIRDPARTYLICENSE.arp: arp.c
$(SED) -n '/University of California/,/SUCH DAMAGE/p' arp.c > $@
CLOBBERFILES += THIRDPARTYLICENSE.arp
#
# The reason this rule checks for the existence of the
# Makefile is that some of the directories do not exist
# in our exportable source builds.
#
$(SUBDIRS): FRC
@if [ -f $@/Makefile ]; then \
cd $@; pwd; $(MAKE) $(TARGET); \
else \
true; \
fi
FRC:
check: $(CHKMANIFEST)
clean: $(SUBDIRS)
-$(RM) $(CLEANFILES)
clobber: $(SUBDIRS)
-$(RM) $(CLEANFILES) $(CLOBBERFILES)
lint: $(LINTSUBDIRS)
$(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl
$(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl
@# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam
$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
-I$(SRC)/head -I$(SRC)/uts/common/ \
-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
-I$(SRC)/lib/gss_mechs/mech_krb5/include \
-I$(SRC)/lib/pam_modules/krb5 \
in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
-I$(SRC)/head -I$(SRC)/uts/common/ \
-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
-I$(SRC)/lib/gss_mechs/mech_krb5/include \
-I$(SRC)/lib/pam_modules/krb5 \
in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \
-erroff=E_GLOBAL_COULD_BE_STATIC2 \
-I$(SRC)/head -I$(SRC)/uts/common/ \
-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
-I$(SRC)/lib/gss_mechs/mech_krb5/include \
-I$(SRC)/lib/pam_modules/krb5 \
in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl
$(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp
$(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl
$(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet
$(LINT.c) syncinit.c $(LDLIBS) -ldlpi
$(LINT.c) syncloop.c $(LDLIBS) -ldlpi
$(LINT.c) syncstat.c $(LDLIBS) -ldlpi
$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \
-lsocket -lnsl
$(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \
-lsocket -lnsl
# EXPORT DELETE START
EXPORT_SRC:
$(RM) Makefile+
sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
< Makefile > Makefile+
$(RM) Makefile
$(MV) Makefile+ Makefile
$(CHMOD) 444 Makefile
# EXPORT DELETE END