usr.lib/bridged/dlpi.c

	dlpi.c revision 4eaa471005973e11a6110b69fe990530b3b95a38
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 * bridged - bridging control daemon.  This module provides DLPI-specific
 * functions for interface to libdlpi.
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/types.h>
#include <syslog.h>
#include <stropts.h>
#include <stp_in.h>
#include <net/if_types.h>
#include <net/if_dl.h>
#include <sys/ethernet.h>
#include <sys/pfmod.h>

#include "global.h"

static const uchar_t bridge_group_address[] = BRIDGE_GROUP_ADDRESS;

static const ushort_t bpdu_filter[] = {
    ENF_PUSHWORD | 0,       /* check for 1:80:c2:0:0:0 dest. */
    ENF_PUSHLIT | ENF_CAND,
#ifdef _BIG_ENDIAN
    0x0180,
#else
    0x8001,
#endif
    ENF_PUSHWORD | 1,
    ENF_PUSHLIT | ENF_CAND,
#ifdef _BIG_ENDIAN
    0xC200,
#else
    0x00C2,
#endif
    ENF_PUSHWORD | 2,
    ENF_PUSHZERO | ENF_CAND,
    ENF_PUSHWORD | 7,       /* check for SSAP/DSAP 42 42 */
    ENF_PUSHLIT | ENF_CAND,
    0x4242,
};

/*
 * Because we're called by dlpi_recv(), we're called with the engine lock held.
 */
/*ARGSUSED*/
static void
dlpi_notify(dlpi_handle_t dlpi, dlpi_notifyinfo_t *info, void *arg)
{
    struct portdata *port = arg;
    int rc;

    switch (info->dni_note) {
    case DL_NOTE_SPEED:
        /* libdlpi gives us Kbps, and we want Mbps */
        if (port->speed == info->dni_speed / 1000)
            break;
        port->speed = info->dni_speed / 1000;
        if ((rc = STP_IN_changed_port_speed(port->port_index,
            port->speed)) != 0)
            syslog(LOG_ERR, "STP can't change port speed on %s: %s",
                port->name, STP_IN_get_error_explanation(rc));
        break;

    case DL_NOTE_PHYS_ADDR:
        if (memcmp(info->dni_physaddr, port->mac_addr, ETHERADDRL) != 0)
            rstp_change_mac(port, info->dni_physaddr);
        break;

    case DL_NOTE_LINK_DOWN:
        if (!port->phys_status)
            break;
        port->phys_status = B_FALSE;
        if (!port->admin_status || protect != DLADM_BRIDGE_PROT_STP ||
            port->sdu_failed)
            break;
        if ((rc = STP_IN_enable_port(port->port_index, False)) != 0)
            syslog(LOG_ERR, "STP can't disable port %s: %s",
                port->name, STP_IN_get_error_explanation(rc));
        break;

    case DL_NOTE_LINK_UP:
        if (port->phys_status)
            break;
        port->phys_status = B_TRUE;
        if (!port->admin_status || protect != DLADM_BRIDGE_PROT_STP ||
            port->sdu_failed) {
            port->bpdu_protect = B_FALSE;
            break;
        }
        /*
         * If we're not running STP, and the link state has just come
         * up, then clear out any protection shutdown state, and allow
         * us to forward again.
         */
        if (port->admin_non_stp && port->bpdu_protect) {
            port->bpdu_protect = B_FALSE;
            enable_forwarding(port);
        }
        if ((rc = STP_IN_enable_port(port->port_index, True)) != 0)
            syslog(LOG_ERR, "STP can't enable port %s: %s",
                port->name, STP_IN_get_error_explanation(rc));
        break;
    }
}

boolean_t
port_dlpi_open(const char *portname, struct portdata *port,
    datalink_class_t class)
{
    uchar_t addrbuf[DLPI_PHYSADDR_MAX];
    size_t alen = DLPI_PHYSADDR_MAX;
    int rc;
    char addrstr[ETHERADDRL * 3];

    /*
     * We use DLPI 'raw' mode so that we get access to the received
     * Ethernet 802 length field.  libdlpi otherwise eats this value.  Note
     * that 'raw' mode support is required in order to use snoop, so it's
     * expected to be common, even if it's not documented.
     */
    rc = dlpi_open(portname, &port->dlpi, DLPI_RAW);
    if (rc != DLPI_SUCCESS) {
        syslog(LOG_ERR, "can't open %s: %s", portname,
            dlpi_strerror(rc));
        return (B_FALSE);
    }

    port->phys_status = B_TRUE;
    port->sdu_failed = B_FALSE;
    port->bpdu_protect = B_FALSE;

    /*
     * Now that the driver is open, we can get at least the initial value
     * of the interface speed.  We need to do this before establishing the
     * notify callback, so that it can update us later.
     */
    get_dladm_speed(port);

    /*
     * Save off the libdlpi port name, as it's dynamically allocated, and
     * the name we're passed is not.
     */
    port->name = dlpi_linkname(port->dlpi);

    /*
     * We can't bind SAP 0 or enable multicast on an etherstub.  It's ok,
     * though, because there's no real hardware involved.
     */
    if (class != DATALINK_CLASS_ETHERSTUB) {
        if ((rc = dlpi_bind(port->dlpi, 0, NULL)) != DLPI_SUCCESS) {
            syslog(LOG_ERR, "can't bind %s: %s", portname,
                dlpi_strerror(rc));
            return (B_FALSE);
        }
        if ((rc = dlpi_enabmulti(port->dlpi, bridge_group_address,
            sizeof (bridge_group_address))) != DLPI_SUCCESS) {
            syslog(LOG_ERR, "can't enable multicast on %s: %s",
                portname, dlpi_strerror(rc));
            return (B_FALSE);
        }
    }

    if ((rc = dlpi_enabnotify(port->dlpi,
        DL_NOTE_PHYS_ADDR | DL_NOTE_LINK_DOWN | DL_NOTE_LINK_UP |
        DL_NOTE_SPEED, dlpi_notify, port, &port->notifyid)) !=
        DLPI_SUCCESS) {
        syslog(LOG_WARNING, "no DLPI notification on %s: %s", portname,
            dlpi_strerror(rc));
    }

    rc = dlpi_get_physaddr(port->dlpi, DL_CURR_PHYS_ADDR, addrbuf, &alen);
    if (rc != DLPI_SUCCESS) {
        syslog(LOG_ERR, "unable to get MAC address on %s: %s",
            port->name, dlpi_strerror(rc));
        return (B_FALSE);
    }
    if (alen != ETHERADDRL) {
        syslog(LOG_ERR, "bad MAC address length %d on %s",
            alen, port->name);
        return (B_FALSE);
    }
    (void) memcpy(port->mac_addr, addrbuf, ETHERADDRL);

    if (class != DATALINK_CLASS_ETHERSTUB) {
        int fd = dlpi_fd(port->dlpi);
        int lowflag = 1;

        if (strioctl(fd, DLIOCLOWLINK, &lowflag, sizeof (lowflag)) != 0)
            syslog(LOG_WARNING, "low-link notify failed on %s: %m",
                portname);
        if (ioctl(fd, I_PUSH, "pfmod") == 0) {
            struct packetfilt pf;

            pf.Pf_Priority = 0;
            pf.Pf_FilterLen = sizeof (bpdu_filter) /
                sizeof (*bpdu_filter);
            (void) memcpy(pf.Pf_Filter, bpdu_filter,
                sizeof (bpdu_filter));
            if (strioctl(fd, PFIOCSETF, &pf, sizeof (pf)) == -1)
                syslog(LOG_WARNING,
                    "pfil ioctl failed on %s: %m", portname);
        } else {
            syslog(LOG_WARNING, "pfil push failed on %s: %m",
                portname);
        }
    }

    if (debugging) {
        (void) _link_ntoa(port->mac_addr, addrstr, ETHERADDRL,
            IFT_OTHER);
        syslog(LOG_DEBUG, "got MAC address %s on %s", addrstr,
            port->name);
    }

    return (B_TRUE);
}