cmd-inet/usr.bin/Makefile

	Makefile revision 7c478bd95313f5f23a4c958a745db2134aa03244
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# ident "%Z%%M% %I% %E% SMI"
#

PROG=       finger rdate ruptime rwho whois
SUIDPROG=   rcp rlogin rsh
ALL=        $(PROG) $(SUIDPROG)
SRCS=       $(ALL:%=%.c)
KCMDPROGS=  rcp rlogin rsh

SUBDIRS=    chat ftp nca netstat pppd pppdump pppstats rdist talk tftp telnet
SUBDIR1=    talk
MSGSUBDIRS= nca talk

# As programs get lint-clean, add them here.  Eventually.
# This hack should go away, and all in PROG should be lint-clean.
LINTCLEAN=  rlogin.c rsh.c rcp.c rdate.c

# Likewise, as subdirs get lint-clean, add them here.  Once
# they're all clean, replace the dependency of the lint target
# with SUBDIRS.  Also (sigh) deal with the commented-out build lines
# for the lint rule.
LINTSUBDIRS=    nca netstat pppd tftp

include ../../Makefile.cmd
include ../Makefile.cmd-inet

COMMONOBJS= kcmd.o
COMMONPOFILES=  $(COMMONOBJS:.o=.po)
COMMONSRCS= $(CMDINETCOMMONDIR)/$(COMMONOBJS:.o=.c)

POFILES=    rlogin.po rsh.po rcp.po $(COMMONPOFILES)
POFILE=     usr.bin.po

all:=       TARGET= all
install:=   TARGET= install
clean:=     TARGET= clean
clobber:=   TARGET= clobber
lint:=      TARGET= lint
_msg:=      TARGET= _msg

ROOTSUIDPROG=   $(SUIDPROG:%=$(ROOTBIN)/%)
$(ROOTSUIDPROG) :=  FILEMODE=   04555
$(ROOTSUIDPROG) :=  OWNER=      root

CPPFLAGS += -DSYSV -DSTRNET -DBSD_COMP -I$(CMDINETCOMMONDIR)

# Eventually just plain CFLAGS should be += -v, but not until all in
# PROGS are lint clean.
$(LINTCLEAN)    :=  CFLAGS += $(CCVERBOSE)

finger :=   CFLAGS += $(CCVERBOSE)
# Enable large file support for reading the lastlog file.
finger :=   CPPFLAGS += -D_FILE_OFFSET_BITS=64

finger :=       LDLIBS += -lnsl -lcurses -lcmd -lsocket
rcp lint-rcp :=     LDLIBS += -lsocket -lsec -lsendfile
rdate lint-rdate:=  LDLIBS += -lsocket
rlogin lint-rlogin :=   LDLIBS += -lnsl -lsocket
rsh lint-rsh :=     LDLIBS += -lsocket
whois :=        LDLIBS += -lnsl -lsocket

include  $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
$(KCMDPROGS)    :=  LDLIBS += -lnsl -lmech_krb5
$(KCMDPROGS)    :=  LDFLAGS += $(ZIGNORE) $(ZLAZYLOAD) $(KRUNPATH) \
                -L$(ROOT)$(KLIBDIR_DO) \
                -L$(ROOT)$(KLIBDIR_GL)
KCMDLINTS=  $(KCMDPROGS:%=lint-%)

$(COMMONPOFILES) \
rlogin.po rcp.po rsh.po \
$(KCMDPROGS) \
$(KCMDLINTS)    :=  CPPFLAGS += -DKERBEROS \
            -I$(CMDINETCOMMONDIR) \
            -I$(SRC)/lib/gss_mechs/mech_krb5 \
            -I$(SRC)/uts/common/gssapi/mechs/krb5/include \
            -I$(SRC)/lib/gss_mechs/mech_krb5/include \
            -I$(SRC)/lib/gss_mechs/mech_krb5/include/krb5

# "-erroff=E_NAME_USED_NOT_DEF2" and "-erroff=E_NAME_DEF_NOT_USED2"
# are required because lint problems in the Kerberos 5 framework.
$(KCMDLINTS)    :=  LINTFLAGS += -lnsl \
            -erroff=E_NAME_USED_NOT_DEF2 \
            -erroff=E_NAME_DEF_NOT_USED2

# Extra source files to lint with
LINTXTRA=
$(KCMDLINTS)    :=  LINTXTRA += $(COMMONSRCS)

ROOTSUNWRCP=    $(ROOT)/usr/lib/sunw,rcp
ROOTRSHSYMLINK= $(ROOT)/usr/ucb/rsh
ROOTREMSHSYMLINK=$(ROOT)/usr/bin/remsh

.KEEP_STATE:

all: $(ALL) $(SUBDIRS)

install: all .WAIT $(ROOTPROG) $(ROOTSUIDPROG) \
    $(SUBDIRS) $(ROOTSUNWRCP) $(ROOTRSHSYMLINK) $(ROOTREMSHSYMLINK)

# Messaging - copy $POFILES to $POFILE to work with the parent directory
# Makefile's '_msg' target.
#
_msg: $(MSGSUBDIRS) $(POFILES)
    $(RM) $(POFILE)
    $(CAT) $(POFILES)   > $(POFILE)

$(COMMONPOFILES): $(COMMONSRCS)
    $(COMPILE.cpp) $(COMMONSRCS) > $(@:.po=.c).i
    $(XGETTEXT) $(XGETFLAGS) $(@:.po=.c).i
    $(RM) $@
    sed "/^domain/d" < messages.po  > $@
    $(RM) messages.po $(@:.po=.c).i

$(COMMONOBJS): $(COMMONSRCS)
    $(COMPILE.c) $(COMMONSRCS)

rlogin: rlogin.o $(COMMONOBJS)
    $(LINK.c) $@.o $(COMMONOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

rcp: rcp.o $(COMMONOBJS)
    $(LINK.c) $@.o $(COMMONOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

rsh: rsh.o $(COMMONOBJS)
    $(LINK.c) $@.o $(COMMONOBJS) -o $@ $(LDLIBS)
    $(POST_PROCESS)

$(ROOTSUNWRCP):
    $(RM) $@; $(SYMLINK) ../bin/rcp $@

$(ROOTRSHSYMLINK):
    $(RM) $@; $(SYMLINK) ../bin/rsh $@

$(ROOTREMSHSYMLINK):
    $(RM) $@; $(SYMLINK) rsh $@

$(SUBDIRS): FRC
    @cd $@; pwd; $(MAKE) $(MFLAGS) $(TARGET)

FRC:

clean: $(SUBDIRS)

clobber: $(SUBDIRS) clobber_local

clobber_local:
    echo $(CLOBBERFILES)
    $(RM) $(ALL)  $(CLOBBERFILES)


LINTLOCALS= $(LINTCLEAN:%.c=lint-%)

lint:   $(LINTSUBDIRS) $(LINTLOCALS)

$(LINTLOCALS):
    $(LINT.c) $(@:lint-%=%.c) $(LINTXTRA) $(LDLIBS)