autopush.c revision 7c478bd95313f5f23a4c958a745db2134aa03244
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 1999-2003 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
/* All Rights Reserved */
#pragma ident "%Z%%M% %I% %E% SMI"
/*
* autopush(1) is the command interface to the STREAMS autopush
* mechanism. The autopush command can be used to configure autopush
* information about a STREAMS driver, remove autopush information,
* and report on current configuration information. Its use is as
* follows:
*
* autopush -f file
* autopush -r -M major -m minor
* autopush -g -M major -m minor
*
* The -f option allows autopush information to be set from a file. The
* format of the file is as follows:
*
* # Comment lines begin with a # in column one.
* # The fields are separated by white space and are:
* # major minor lastminor module1 module2 ... module8
*
* "lastminor" is used to configure ranges of minor devices, from "minor"
* to "lastminor" inclusive. It should be set to zero when not in use.
* The -r option allows autopush information to be removed for the given
* major/minor pair. The -g option allows the configuration information
* to be printed. The format of printing is the same as for the file.
*/
/*
* Use autopush version 1; keep before #include <sys/sad.h>.
* See <sys/sad.h> for details.
*/
#define AP_VERSION 1
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/modctl.h>
#include <sys/sad.h>
#include <stdio.h>
#include <fcntl.h>
#include <errno.h>
#include <ctype.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <locale.h>
#include <sys/stat.h>
#define OPTIONS "M:f:gm:r" /* command line options for getopt(3C) */
#define COMMENT '#'
#define MINUS '-'
#define SLASH '/'
/*
* Output format.
*/
#define OHEADER " Major Minor Lastminor\tModules\n"
#define OFORMAT1_ONE "%10ld %10ld - \t"
#define OFORMAT1_RANGE "%10ld %10ld %10ld\t"
#define OFORMAT1_ALL "%10ld ALL - \t"
#define AP_ANCHOR "[anchor]"
#define Openerr gettext("%s: ERROR: Could not open %s: ")
#define Digiterr gettext("%s: ERROR: argument to %s option must be " \
"numeric\n")
#define Badline gettext("%s: WARNING: File %s: bad input line %d " \
"ignored\n")
static void usage();
static int rem_info(), get_info(), set_info();
static int is_white_space(), parse_line();
static char *Cmdp; /* command name */
/*
* main():
* process command line arguments.
*/
int
main(int argc, char *argv[])
{
int c; /* character read by getopt(3C) */
char *filenamep; /* name of configuration file */
major_t major; /* major device number */
minor_t minor; /* minor device number */
char *cp;
int exitcode;
ushort_t minflag = 0; /* -m option used */
ushort_t majflag = 0; /* -M option used */
ushort_t fflag = 0; /* -f option used */
ushort_t rflag = 0; /* -r option used */
ushort_t gflag = 0; /* -g option used */
ushort_t errflag = 0; /* options usage error */
(void) setlocale(LC_ALL, "");
#if !defined(TEXT_DOMAIN)
#define TEXT_DOMAIN "SYS_TEST"
#endif
(void) textdomain(TEXT_DOMAIN);
/*
* Get command name.
*/
Cmdp = argv[0];
for (filenamep = argv[0]; *filenamep; filenamep++)
if (*filenamep == SLASH)
Cmdp = filenamep + 1;
/*
* Get options.
*/
while (!errflag && ((c = getopt(argc, argv, OPTIONS)) != -1)) {
switch (c) {
case 'M':
if (fflag|majflag)
errflag++;
else {
majflag++;
for (cp = optarg; *cp; cp++)
if (!isdigit(*cp)) {
(void) fprintf(stderr,
Digiterr, Cmdp, "-M");
exit(1);
}
major = (major_t)atol(optarg);
}
break;
case 'm':
if (fflag|minflag)
errflag++;
else {
minflag++;
for (cp = optarg; *cp; cp++)
if (!isdigit(*cp)) {
(void) fprintf(stderr,
Digiterr, Cmdp, "-m");
exit(1);
}
minor = (minor_t)atol(optarg);
}
break;
case 'f':
if (fflag|gflag|rflag|majflag|minflag)
errflag++;
else {
fflag++;
filenamep = optarg;
}
break;
case 'r':
if (fflag|gflag|rflag)
errflag++;
else
rflag++;
break;
case 'g':
if (fflag|gflag|rflag)
errflag++;
else
gflag++;
break;
default:
errflag++;
break;
} /* switch */
if (errflag) {
usage();
exit(1);
}
} /* while */
if (((gflag || rflag) && (!majflag || !minflag)) || (optind != argc)) {
usage();
exit(1);
}
if (fflag)
exitcode = set_info(filenamep);
else if (rflag)
exitcode = rem_info(major, minor);
else if (gflag)
exitcode = get_info(major, minor);
else {
usage();
exit(1);
}
return (exitcode);
}
/*
* usage():
* print out usage statement.
*/
static void
usage()
{
(void) fprintf(stderr, gettext("%s: USAGE:\n\t%s -f filename\n"
"\t%s -r -M major -m minor\n"
"\t%s -g -M major -m minor\n"), Cmdp, Cmdp, Cmdp, Cmdp);
}
/*
* set_info():
* set autopush configuration information.
* namep: autopush configuration filename
*/
static int
set_info(char *namep)
{
int line; /* line number of file */
FILE *fp; /* file pointer of config file */
char buf[256]; /* input buffer */
struct strapush push; /* configuration information */
int sadfd; /* file descriptor to SAD driver */
int retcode = 0; /* return code */
int parsecode; /* return value from parse function */
if ((sadfd = open(ADMINDEV, O_RDWR)) < 0) {
(void) fprintf(stderr, Openerr, Cmdp, ADMINDEV);
perror("");
return (1);
}
if ((fp = fopen(namep, "r")) == NULL) {
(void) fprintf(stderr, Openerr, Cmdp, namep);
perror("");
return (1);
}
line = 0;
while (fgets(buf, sizeof (buf), fp) != NULL) {
line++;
if ((buf[0] == COMMENT) || is_white_space(buf))
continue;
(void) memset(&push, 0, sizeof (struct strapush));
parsecode = parse_line(buf, line, namep, &push);
if (parsecode != 0) {
retcode = parsecode;
continue;
}
if (push.sap_minor == (minor_t)-1)
push.sap_cmd = SAP_ALL;
else if (push.sap_lastminor == 0)
push.sap_cmd = SAP_ONE;
else
push.sap_cmd = SAP_RANGE;
if (ioctl(sadfd, SAD_SAP, &push) < 0) {
int error = errno;
retcode = 1;
(void) fprintf(stderr,
gettext("%s: ERROR: File %s: could not configure "
"autopush for line %d\n"), Cmdp, namep, line);
switch (error) {
case EPERM:
(void) fprintf(stderr, gettext("%s: ERROR: "
"You don't have permission to set autopush "
"information\n"), Cmdp);
break;
case EINVAL:
(void) fprintf(stderr, gettext("%s: ERROR: "
"Invalid major device number or invalid "
"module name or too many modules\n"), Cmdp);
break;
case ENOSTR:
(void) fprintf(stderr, gettext("%s: ERROR: "
"Major device is not a STREAMS "
"driver\n"), Cmdp);
break;
case EEXIST:
(void) fprintf(stderr, gettext("%s: ERROR: "
"Major/minor already configured\n"), Cmdp);
break;
case ENOSR:
(void) fprintf(stderr, gettext("%s: ERROR: Ran "
"out of autopush structures\n"), Cmdp);
break;
case ERANGE:
(void) fprintf(stderr, gettext("%s: ERROR: "
"lastminor must be greater than minor\n"),
Cmdp);
break;
default:
(void) fprintf(stderr, gettext("%s: ERROR: "),
Cmdp);
(void) fprintf(stderr, "%s\n", strerror(error));
break;
} /* switch */
} /* if */
} /* while */
return (retcode);
}
/*
* rem_info():
* remove autopush configuration information.
*/
static int
rem_info(major_t maj, minor_t min)
{
struct strapush push; /* configuration information */
int sadfd; /* file descriptor to SAD driver */
int retcode = 0; /* return code */
if ((sadfd = open(ADMINDEV, O_RDWR)) < 0) {
(void) fprintf(stderr, Openerr, Cmdp, ADMINDEV);
perror("");
return (1);
}
push.sap_cmd = SAP_CLEAR;
push.sap_minor = min;
push.sap_major = maj;
if (ioctl(sadfd, SAD_SAP, &push) < 0) {
int error = errno;
retcode = 1;
(void) fprintf(stderr, gettext("%s: ERROR: Could not remove "
"autopush information\n"), Cmdp);
switch (error) {
case EPERM:
(void) fprintf(stderr, gettext("%s: ERROR: You don't "
"have permission to remove autopush "
"information\n"), Cmdp);
break;
case EINVAL:
if ((min != 0) && (ioctl(sadfd, SAD_GAP, &push) == 0) &&
(push.sap_cmd == SAP_ALL))
(void) fprintf(stderr, gettext("%s: ERROR: "
"When removing an entry for ALL minors, "
"minor must be set to 0\n"), Cmdp);
else
(void) fprintf(stderr, gettext("%s: ERROR: "
"Invalid major device number\n"), Cmdp);
break;
case ENODEV:
(void) fprintf(stderr, gettext("%s: ERROR: Major/minor "
"not configured for autopush\n"), Cmdp);
break;
case ERANGE:
(void) fprintf(stderr, gettext("%s: ERROR: minor must "
"be set to begining of range when clearing\n"),
Cmdp);
break;
default:
(void) fprintf(stderr, gettext("%s: ERROR: "), Cmdp);
(void) fprintf(stderr, "%s\n", strerror(error));
break;
} /* switch */
}
return (retcode);
}
/*
* get_info():
* get autopush configuration information.
*/
static int
get_info(major_t maj, minor_t min)
{
struct strapush push; /* configuration information */
int i; /* counter */
int sadfd; /* file descriptor to SAD driver */
if ((sadfd = open(USERDEV, O_RDWR)) < 0) {
(void) fprintf(stderr, Openerr, Cmdp, USERDEV);
perror("");
return (1);
}
push.sap_major = maj;
push.sap_minor = min;
if (ioctl(sadfd, SAD_GAP, &push) < 0) {
int error = errno;
(void) fprintf(stderr, gettext("%s: ERROR: Could not get "
"autopush information\n"), Cmdp);
switch (error) {
case EINVAL:
(void) fprintf(stderr, gettext("%s: ERROR: Invalid "
"major device number\n"), Cmdp);
break;
case ENOSTR:
(void) fprintf(stderr, gettext("%s: ERROR: Major "
"device is not a STREAMS driver\n"), Cmdp);
break;
case ENODEV:
(void) fprintf(stderr, gettext("%s: ERROR: Major/minor "
"not configured for autopush\n"), Cmdp);
break;
default:
(void) fprintf(stderr, gettext("%s: ERROR: "), Cmdp);
(void) fprintf(stderr, "%s\n", strerror(error));
break;
} /* switch */
return (1);
}
(void) printf(OHEADER);
switch (push.sap_cmd) {
case SAP_ONE:
(void) printf(OFORMAT1_ONE, push.sap_major, push.sap_minor);
break;
case SAP_RANGE:
(void) printf(OFORMAT1_RANGE, push.sap_major, push.sap_minor,
push.sap_lastminor);
break;
case SAP_ALL:
(void) printf(OFORMAT1_ALL, push.sap_major);
break;
default:
(void) fprintf(stderr,
gettext("%s: ERROR: Unknown configuration type\n"), Cmdp);
return (1);
}
for (i = 0; i < push.sap_npush; i++) {
(void) printf("%s", push.sap_list[i]);
if (push.sap_anchor == (i + 1))
(void) printf(" %s", AP_ANCHOR);
if (i < push.sap_npush - 1)
(void) printf(" ");
}
(void) printf("\n");
return (0);
}
/*
* is_white_space():
* Return 1 if buffer is all white space.
* Return 0 otherwise.
*/
static int
is_white_space(char *bufp)
{
while (*bufp) {
if (!isspace(*bufp))
return (0);
bufp++;
}
return (1);
}
/*
* parse_line():
* Parse input line from file and report any errors found. Fill
* strapush structure along the way. Returns 1 if the line has
* errors and 0 if the line is well-formed. Another hidden
* dependency on MAXAPUSH. `linep' is the input buffer, `lineno'
* is the current line number, and `namep' is the filename.
*/
static int
parse_line(char *linep, int lineno, char *namep, struct strapush *pushp)
{
char *wp; /* word pointer */
char *cp; /* character pointer */
int midx; /* module index */
int npush; /* number of modules to push */
char c;
major_t major_num;
pushp->sap_anchor = 0; /* by default, no anchor */
/*
* Find the major device number.
*/
for (wp = linep; isspace(*wp); wp++)
;
for (cp = wp; !isspace(*cp); cp++)
;
if (!isspace(*cp)) {
(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
return (1);
}
c = *cp;
*cp = '\0';
if (modctl(MODGETMAJBIND, wp, strlen(wp) + 1, &major_num) != 0) {
(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
return (1);
}
*cp = c;
pushp->sap_major = major_num;
/*
* Find the minor device number. Must handle negative values here.
*/
for (wp = cp; isspace(*wp); wp++)
;
for (cp = wp; (isdigit(*cp) || (*cp == MINUS)); cp++)
;
if (!isspace(*cp)) {
(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
return (1);
}
pushp->sap_minor = (minor_t)atol(wp);
/*
* Find the lastminor.
*/
for (wp = cp; isspace(*wp); wp++)
;
for (cp = wp; isdigit(*cp); cp++)
;
if (!isspace(*cp)) {
(void) fprintf(stderr, Badline, Cmdp, namep, lineno);
return (1);
}
pushp->sap_lastminor = (minor_t)atol(wp);
/*
* Read the list of module names.
*/
npush = 0;
while ((npush < MAXAPUSH) && (*cp)) {
while (isspace(*cp))
cp++;
if (strncasecmp(cp, AP_ANCHOR, sizeof (AP_ANCHOR) - 1) == 0) {
if (pushp->sap_anchor != 0) {
(void) fprintf(stderr,
gettext("%s: ERROR: File %s: more than "
"one anchor in line, line %d ignored\n"),
Cmdp, namep, lineno);
return (1);
}
if (npush == 0)
(void) fprintf(stderr,
gettext("%s: WARNING: File %s: anchor at "
"beginning of stream on line %d ignored\n"),
Cmdp, namep, lineno);
pushp->sap_anchor = npush;
cp += sizeof (AP_ANCHOR) - 1;
continue;
}
for (midx = 0; !isspace(*cp) && *cp; midx++) {
if (midx == FMNAMESZ) {
(void) fprintf(stderr, gettext("%s: ERROR: "
"File %s: module name too long, line %d "
"ignored\n"), Cmdp, namep, lineno);
return (1);
}
pushp->sap_list[npush][midx] = *cp++;
}
if (midx > 0) {
pushp->sap_list[npush][midx] = '\0';
npush++;
}
}
pushp->sap_npush = npush;
/*
* We have everything we want from the line.
* Now make sure there is no extra garbage on the line.
*/
while (isspace(*cp))
cp++;
if (*cp) {
(void) fprintf(stderr,
gettext("%s: ERROR: File %s: too many modules, line %d "
"ignored\n"), Cmdp, namep, lineno);
return (1);
}
return (0);
}