-- #ident "%Z%%M% %I% %E% SMI"

APPLICATION-MIB DEFINITIONS ::= BEGIN

IMPORTS

OBJECT-TYPE, Counter32, Gauge32

FROM SNMPv2-SMI

mib-2

FROM RFC1213-MIB

DisplayString, TimeStamp

FROM SNMPv2-TC;

-- Textual conventions

-- DistinguishedName [5] is used to refer to objects in the

-- directory.

DistinguishedName ::= TEXTUAL-CONVENTION

STATUS current

DESCRIPTION

"A Distinguished Name represented in accordance with

RFC1485."

SYNTAX DisplayString

application MODULE-IDENTITY

LAST-UPDATED "9311280000Z"

ORGANIZATION "IETF Mail and Directory Management Working Group"

CONTACT-INFO

" Ned Freed

Postal: Innosoft International, Inc.

250 West First Street, Suite 240

Claremont, CA 91711

US

Tel: +1 909 624 7907

Fax: +1 909 621 5319

E-Mail: ned@innosoft.com"

DESCRIPTION

"The MIB module describing network service applications"

::= { mib-2 27 }

-- The basic applTable contains a list of the application

-- entities.

applTable OBJECT-TYPE

SYNTAX SEQUENCE OF ApplEntry

MAX-ACCESS not-accessible

STATUS current

DESCRIPTION

"The table holding objects which apply to all different

kinds of applications providing network services."

::= {application 1}

applEntry OBJECT-TYPE

SYNTAX ApplEntry

MAX-ACCESS not-accessible

STATUS current

DESCRIPTION

"An entry associated with a network service application."

INDEX {applIndex}

::= {applTable 1}

ApplEntry ::= SEQUENCE {

applIndex

INTEGER,

applName

DisplayString,

applDirectoryName

DistinguishedName,

applVersion

DisplayString,

applUptime

TimeStamp,

applOperStatus

INTEGER,

applLastChange

TimeStamp,

applInboundAssociations

Gauge32,

applOutboundAssociations

Gauge32,

applAccumulatedInboundAssociations

Counter32,

applAccumulatedOutboundAssociations

Counter32,

applLastInboundActivity

TimeStamp,

applLastOutboundActivity

TimeStamp,

applRejectedInboundAssociations

Counter32,

applFailedOutboundAssociations

Counter32

}

applIndex OBJECT-TYPE

SYNTAX INTEGER (1..2147483647)

MAX-ACCESS not-accessible

STATUS current

DESCRIPTION

"An index to uniquely identify the network service

application."

::= {applEntry 1}

applName OBJECT-TYPE

SYNTAX DisplayString

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The name the network service application chooses to be

known by."

::= {applEntry 2}

applDirectoryName OBJECT-TYPE

SYNTAX DistinguishedName

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The Distinguished Name of the directory entry where

static information about this application is stored.

An empty string indicates that no information about

the application is available in the directory."

::= {applEntry 3}

applVersion OBJECT-TYPE

SYNTAX DisplayString

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The version of network service application software."

::= {applEntry 4}

applUptime OBJECT-TYPE

SYNTAX TimeStamp

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The value of sysUpTime at the time the network service

application was last initialized. If the application was

last initialized prior to the last initialization of the

network management subsystem, then this object contains

a zero value."

::= {applEntry 5}

applOperStatus OBJECT-TYPE

SYNTAX INTEGER {

up(1),

down(2),

halted(3),

congested(4),

restarting(5)

}

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"Indicates the operational status of the network service

application. 'down' indicates that the network service is

not available. 'running' indicates that the network service

is operational and available. 'halted' indicates that the

service is operational but not available. 'congested'

indicates that the service is operational but no additional

inbound associations can be accomodated. 'restarting'

indicates that the service is currently unavailable but is

in the process of restarting and will be available soon."

::= {applEntry 6}

applLastChange OBJECT-TYPE

SYNTAX TimeStamp

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The value of sysUpTime at the time the network service

application entered its current operational state. If

the current state was entered prior to the last

initialization of the local network management subsystem,

then this object contains a zero value."

::= {applEntry 7}

applInboundAssociations OBJECT-TYPE

SYNTAX Gauge32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The number of current associations to the network service

application, where it is the responder. For dynamic single

threaded processes, this will be the number of application

instances."

::= {applEntry 8}

applOutboundAssociations OBJECT-TYPE

SYNTAX Gauge32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The number of current associations to the network service

application, where it is the initiator. For dynamic single

threaded processes, this will be the number of application

instances."

::= {applEntry 9}

applAccumulatedInboundAssociations OBJECT-TYPE

SYNTAX Counter32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The total number of associations to the application entity

since application initialization, where it was the responder.

For dynamic single threaded processes, this will be the

number of application instances."

::= {applEntry 10}

applAccumulatedOutboundAssociations OBJECT-TYPE

SYNTAX Counter32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The total number of associations to the application entity

since application initialization, where it was the initiator.

For dynamic single threaded processes, this will be the

number of application instances."

::= {applEntry 11}

applLastInboundActivity OBJECT-TYPE

SYNTAX TimeStamp

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The value of sysUpTime at the time this application last

had an inbound association. If the last association

occurred prior to the last initialization of the network

subsystem, then this object contains a zero value."

::= {applEntry 12}

applLastOutboundActivity OBJECT-TYPE

SYNTAX TimeStamp

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The value of sysUpTime at the time this application last

had an outbound association. If the last association

occurred prior to the last initialization of the network

subsystem, then this object contains a zero value."

::= {applEntry 13}

applRejectedInboundAssociations OBJECT-TYPE

SYNTAX Counter32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The total number of inbound associations the application

entity has rejected, since application initialization."

::= {applEntry 14}

applFailedOutboundAssociations OBJECT-TYPE

SYNTAX Counter32

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The total number associations where the application entity

is initiator and association establishment has failed,

since application initialization."

::= {applEntry 15}

-- The assocTable augments the information in the applTable

-- with information about associations. Note that two levels

-- of compliance are specified below, depending on whether

-- association monitoring is mandated.

assocTable OBJECT-TYPE

SYNTAX SEQUENCE OF AssocEntry

MAX-ACCESS not-accessible

STATUS current

DESCRIPTION

"The table holding a set of all active application

associations."

::= {application 2}

assocEntry OBJECT-TYPE

SYNTAX AssocEntry

MAX-ACCESS not-accessible

STATUS current

DESCRIPTION

"An entry associated with an association for a network

service application."

INDEX {applIndex, assocIndex}

::= {assocTable 1}

AssocEntry ::= SEQUENCE {

assocIndex

INTEGER,

assocRemoteApplication

DisplayString,

assocApplicationProtocol

OBJECT IDENTIFIER,

assocApplicationType

INTEGER,

assocDuration

TimeStamp

}

assocIndex OBJECT-TYPE

SYNTAX INTEGER (1..2147483647)

MAX-ACCESS not-accessible

STATUS current

DESCRIPTION

"An index to uniquely identify each association for a network

service application."

::= {assocEntry 1}

assocRemoteApplication OBJECT-TYPE

SYNTAX DisplayString

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The name of the system running remote network service

application. For an IP-based application this should be

either a domain name or IP address. For an OSI application

it should be the string encoded distinguished name of the

managed object. For X.400(84) MTAs which do not have a

Distinguished Name, the RFC1327 [6] syntax

'mta in globalid' should be used."

::= {assocEntry 2}

assocApplicationProtocol OBJECT-TYPE

SYNTAX OBJECT IDENTIFIER

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"An identification of the protocol being used for the

application. For an OSI Application, this will be the

Application Context. For Internet applications, the IANA

maintains a registry of the OIDs which correspond to

well-known applications. If the application protocol is

not listed in the registry, an OID value of the form

{applTCPProtoID port} or {applUDProtoID port} are used for

TCP-based and UDP-based protocols, respectively. In either

case 'port' corresponds to the primary port number being

used by the protocol."

::= {assocEntry 3}

assocApplicationType OBJECT-TYPE

SYNTAX INTEGER {

ua-initiator(1),

ua-responder(2),

peer-initiator(3),

peer-responder(4)}

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"This indicates whether the remote application is some type of

client making use of this network service (e.g. a User Agent)

or a server acting as a peer. Also indicated is whether the

remote end initiated an incoming connection to the network

service or responded to an outgoing connection made by the

local application."

::= {assocEntry 4}

assocDuration OBJECT-TYPE

SYNTAX TimeStamp

MAX-ACCESS read-only

STATUS current

DESCRIPTION

"The value of sysUpTime at the time this association was

started. If this association started prior to the last

initialization of the network subsystem, then this

object contains a zero value."

::= {assocEntry 5}

-- Conformance information

applConformance OBJECT IDENTIFIER ::= {application 3}

applGroups OBJECT IDENTIFIER ::= {applConformance 1}

applCompliances OBJECT IDENTIFIER ::= {applConformance 2}

-- Compliance statements

applCompliance MODULE-COMPLIANCE

STATUS current

DESCRIPTION

"The compliance statement for SNMPv2 entities

which implement the Network Services Monitoring MIB

for basic monitoring of network service applications."

MODULE -- this module

MANDATORY-GROUPS {applGroup}

::= {applCompliances 1}

assocCompliance MODULE-COMPLIANCE

STATUS current

DESCRIPTION

"The compliance statement for SNMPv2 entities which

implement the Network Services Monitoring MIB for basic

monitoring of network service applications and their

associations."

MODULE -- this module

MANDATORY-GROUPS {applGroup, assocGroup}

::= {applCompliances 2}

-- Units of conformance

applGroup OBJECT-GROUP

OBJECTS {

applName, applVersion, applUptime, applOperStatus,

applLastChange, applInboundAssociations,

applOutboundAssociations, applAccumulatedInboundAssociations,

applAccumulatedOutboundAssociations, applLastInboundActivity,

applLastOutboundActivity, applRejectedInboundAssociations,

applFailedOutboundAssociations}

STATUS current

DESCRIPTION

"A collection of objects providing basic monitoring of

network service applications."

::= {applGroups 1}

assocGroup OBJECT-GROUP

OBJECTS {

assocRemoteApplication, assocApplicationProtocol,

assocApplicationType, assocDuration}

STATUS current

DESCRIPTION

"A collection of objects providing basic monitoring of

network service applications' associations."

::= {applGroups 2}

-- OIDs of the form {applTCPProtoID port} are intended to be used

-- for TCP-based protocols that don't have OIDs assigned by other

-- means. {applUDPProtoID port} serves the same purpose for

-- UDP-based protocols. In either case 'port' corresponds to

-- the primary port number being used by the protocol. For example,

-- assuming no other OID is assigned for SMTP, an OID of

-- {applTCPProtoID 25} could be used, since SMTP is a TCP-based

-- protocol that uses port 25 as its primary port.

applTCPProtoID OBJECT IDENTIFIER ::= {application 4}

applUDPProtoID OBJECT IDENTIFIER ::= {application 5}

END