mib_MS.txt revision 7c478bd95313f5f23a4c958a745db2134aa03244
--
-- CDDL HEADER START
--
-- The contents of this file are subject to the terms of the
-- Common Development and Distribution License, Version 1.0 only
-- (the "License"). You may not use this file except in compliance
-- with the License.
--
-- You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
-- or http://www.opensolaris.org/os/licensing.
-- See the License for the specific language governing permissions
-- and limitations under the License.
--
-- When distributing Covered Code, include this CDDL HEADER in each
-- file and include the License file at usr/src/OPENSOLARIS.LICENSE.
-- If applicable, add the following below this CDDL HEADER, with the
-- fields enclosed by brackets "[]" replaced with your own identifying
-- information: Portions Copyright [yyyy] [name of copyright owner]
--
-- CDDL HEADER END
--
-- Copyright 1996 Sun Microsystems, Inc. All Rights Reserved.
-- Use is subject to license terms.
--
-- #ident "%Z%%M% %I% %E% SMI"
--
MS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Counter32, Gauge32
FROM SNMPv2-SMI
DisplayString, TimeInterval
FROM SNMPv2-TC
mib-2
FROM RFC1213-MIB
applIndex
FROM APPLICATION-MIB;
ms MODULE-IDENTITY
LAST-UPDATED "9601290000Z"
ORGANIZATION "ICNC, SunSoft"
CONTACT-INFO
" Olivier Reisacher
Postal: ICNC, SunSoft
32, chemin du vieux chene
38 240 Meylan
FRANCE
Tel: +33 76 41 42 43
Fax: +33 76 41 42 41
E-Mail: oreisache@france.sun.com"
DESCRIPTION
"The MIB module describing Message Stores (MSs)"
::= { private-mibs 4 }
-- ---------------------
-- | ADMISTRATOR NEEDS |
-- ---------------------
--
-- 1. Is the MS running? Is it down? Is it overloaded?
-- 2. Which are the Users that are creating the load?
-- 3. What is the current number of connections compare to
-- the maximum number of connections supported?
-- 4. Is the disk full? How much disk space is still available?
-- 5. Does a given User regularly read his mail?
--
--
-- ---------
-- | GOALS |
-- ---------
--
-- Here are the 5 major goals we have tried to reach:
-- - solve the administrator needs.
-- - build/integrate this MIB on top of the Network Services
-- Monitoring MIB (RFC 1565).
-- - use as much as possible the design/ideas contained in the
-- MTA MIB (RFC 1566), the DSA MIB (RFC 1567) and the HTTP MIB.
-- All these three MIBs are on the standard track and are also built on
-- top of the Network Services Monitoring MIB.
-- - build a model to hold common variables/counters to monitor all kinds
-- of Message Stores. This model should be as hierarchical as possible
-- to be efficient.
-- - test the resulting model against the following scenarios:
-- the Berkeley Mailboxes that can be accessed by IMAP or POP
-- the Solstice X.400 Message Store
-- the Solstice Message Center
--
--
-- ---------
-- | MODEL |
-- ---------
--
-- The proposed model is the following:
-- a MS is a APPLICATION (see RFC 1565)
-- a MS serves several USERs
-- a USER owns several FOLDERs
--
-- As we can guess, the number of USERs supported by a single MS will continue
-- to grow in the future.
-- Dumping some huge tables using SNMP is slow and resource consuming, so we
-- decided to introduce a intermediate level between the MS and its USERs:
-- the notion of GROUP.
--
-- We have then the resulting model:
-- a MS is an APPLICATION (see RFC 1565)
-- a MS serves several GROUPs
-- a GROUP is composed of several USERs
-- a USER owns several FOLDERs
--
--
-- We have also introduced two new types of variables because
-- a single MS may support several protocols:
-- MsAccessMethod
-- MsTransferMethod
--
-- These two new types are used in the msAccessTable, msTransferTable,
-- msUserAccessTable, msUserTransferTable.
-- The two first tables provide some statistics per Access/Transfer method
-- for the entire MS and the other two tables provide some statistics
-- per Access/Transfer Method and per User.
--
-- We do not provide statistics per Access/Transfer method per Group
-- because this implies two extra tables and we think that it will
-- be easy to sum these statistics on all users contained in that Group
-- (a Group should not contain thousand of Users).
--
-- Comments:
--
-- - Variables which name looks like XXXAccessYYY are related to the
-- communication between Users and the MS.
-- - Variables which name looks like XXXTransferYYY are related to the
-- communication between the MS and the MTA.
--
--
-- MS
-- |---------------------------------------------------------|
-- | |
-- | global stats of the MS |
-- | |
-- | |----------------------------| |
-- | | stats per Transfer method | |
-- | |----------------------------| |
-- | |
-- | |----------------------------| |
-- | | stats per Access method | |
-- | |----------------------------| |
-- | |
-- | GROUP |
-- | |-----------------------------------------------------| |
-- | | | |
-- | | global stats of the GROUP | |
-- | | | |
-- | | USER | |
-- | | |-------------------------------------------------| | |
-- | | | | | |
-- | | | global stats of the USER | | |
-- | | | | | |
-- | | | |----------------------------| | | |
-- | | | | stats per Transfer method | | | |
-- | | | |----------------------------| | | |
-- | | | | | |
-- | | | |----------------------------| | | |
-- | | | | stats per Access method | | | |
-- | | | |----------------------------| | | |
-- | | | | | |
-- | | | | | |
-- | | | FOLDER | | |
-- | | | |---------------------------------------------| | | |
-- | | | | | | | |
-- | | | | global stats of the FOLDER | | | |
-- | | | | | | | |
-- | | | | | | | |
-- | | | | | | | |
-- | | | | | | | |
-- | | | |---------------------------------------------| | | |
-- | | | | | |
-- | | |-------------------------------------------------| | |
-- | | | |
-- | |-----------------------------------------------------| |
-- | |
-- |---------------------------------------------------------|
--
--
-- Assumptions we made:
-- - a User belongs to an MS (configuration of the MS)
-- - a Association is always owned by a User
-- - a Folder is always owned by a User
--
-- Example of questions we can answer:
-- - Which is the Folder currently accessed by a given User?
--
-- Known limitation of the model:
-- - each User can only belong to one Group.
-- - each Folder is associated with a single User, the owner
-- of the Folder (see msFolderIsShared).
-- - we won't be able to provide the history list of Users
-- who accessed a given Folder
MsAccessMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Access method used by the UA to access the MS.
This new type is used in both the msAccessTable and the
msUserAccessTable.
pop(1), imap(4), p7(9) should only be used if the protocol
version is unknown."
SYNTAX INTEGER {
pop(1),
pop-2(2),
pop-3(3),
imap(4),
imap-2(5),
imap-2bis(6),
imap-3(7),
imap-4(8),
p7(9),
p7-88(10)
}
MsTransferMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Transfer method used by the MS to submit a message
to the Message Tranfer System (MTS) or the Transfer method used
by the Message Transfer System to deliver a message to the MS.
This new type is used in both the msTransferTable and the
msUserTransferTable.
p3(1) should only be used if the protocol version is unknown."
SYNTAX INTEGER {
p3(1),
p3-88(2)
}
-- The msTable can be seen as an extension of the applTable
-- (see INDEX clause in the msEntry)
--
-- Comments:
-- ---------
-- The sum on all the Users of the used volume >= sum of the volume used by the MS
-- (some messages may be shared by several Users)
msTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding information specific to an MS."
::= { ms 1 }
msEntry OBJECT-TYPE
SYNTAX MsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each MS."
INDEX { applIndex }
::= { msTable 1 }
MsEntry ::= SEQUENCE {
msMessages
Gauge32,
msVolume
Gauge32,
msFreeSpace
INTEGER,
msGroups
Gauge32
}
msMessages OBJECT-TYPE
SYNTAX Gauge32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of messages stored in the MS."
::= { msEntry 1 }
msVolume OBJECT-TYPE
SYNTAX Gauge32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The volume measured in kilo-octet of messages stored
in the MS."
::= { msEntry 2 }
msFreeSpace OBJECT-TYPE
SYNTAX INTEGER
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free space available to store new messages in the MS.
This space is measured in kilo-octets.
If this value is not available, it should be set to -1."
::= { msEntry 3 }
msGroups OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Groups of Users in the MS."
::= { msEntry 4 }
-- The msAccessTable provide some statitics about the usage
-- of the MS per Access method.
msAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding statistics for an MS per
Access method."
::= { ms 2 }
msAccessEntry OBJECT-TYPE
SYNTAX MsAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each MS and per Access method."
INDEX { applIndex, msAccessIndex }
::= { msAccessTable 1 }
MsAccessEntry ::= SEQUENCE {
msAccessIndex,
MsAccessMethod,
msAccessListedMessages
Counter32,
msAccessFetchedMessages
Counter32,
msAccessDeletedMessages
Counter32,
msAccessListedVolume
Counter32,
msAccessFetchedVolume
Counter32,
msAccessDeletedVolume
Counter32,
msAccesses
Gauge32,
msAccumulatedAccesses
Counter32,
msLastAccess
TimeInterval,
msAccumulatedAccesseTime
TimeInterval,
msRejectedAccesses
Counter32,
msAccessRejectionReason
DisplayString
}
msAccessIndex OBJECT-TYPE
SYNTAX MsAccessMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index used to group statistics per Access method."
::= { msAccessEntry 1 }
msAccessListedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages listed since MS initialization,
per Access method."
::= { msAccessEntry 2 }
msAccessFetchedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages fetched since MS initialization,
per Access method."
::= { msAccessEntry 3 }
msAccessDeletedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages deleted since MS initialization,
per Access method."
::= { msAccessEntry 4 }
msAccessListedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages listed since MS initialization,
per Access method, measured in kilo-octets."
::= { msAccessEntry 5 }
msAccessFetchedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages fetched since MS initialization,
per Access method, measured in kilo-octets."
::= { msAccessEntry 6 }
msAccessDeletedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages deleted since MS initialization,
per Access method, measured in kilo-octets."
::= { msAccessEntry 7 }
msAccesses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current accesses to the MS, per Access method."
::= { msAccessEntry 8 }
msAccumulatedAccesses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of accesses to the MS since MS initialization,
per Access method."
::= { msAccessEntry 9 }
msLastAccess OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since the last time that the MS was accessed,
per Access method."
::= { msAccessEntry 10 }
msAccumulatedAccessTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time of connection to the MS
since MS initialization, per Access method."
::= { msAccessEntry 11 }
msRejectedAccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of accesses the MS has rejected since MS
initialization, per Access method."
::= { msAccessEntry 12 }
msAccessRejectedReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason, if any, for the last access this
MS refused. An empty string indicates that
the last attempt was successful. If no access attempt
has been made since the MS was initialized the value
should be 'never'."
::= { msAccessEntry 13 }
-- The msTransferTable provide some statitics about the usage
-- of the MS per Transfer method.
--
-- When the MS application does not communicate with the MTA
-- (like "Berkeley Mailboxes"), there will no entry in this table.
msTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding statistics for a entire MS per
Transfer method."
::= { ms 3 }
msTransferEntry OBJECT-TYPE
SYNTAX MsTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each MS and per Transfer method."
INDEX { applIndex, msTransferIndex }
::= { msTransferTable 1 }
MsTransferEntry ::= SEQUENCE {
msTransferIndex,
MsTransferMethod,
msTransferSentMessages
Counter32,
msTransferReceivedMessages
Counter32,
msTransferSentVolume
Counter32,
msTransferReceivedVolume
Counter32,
msTransfers
Gauge32,
msAccumulatedTranfers,
Counter32,
msLastTransfer
TimeInterval,
msFailedTransfers
Counter32,
msTransferFailureReason
DisplayString
}
msTransferIndex OBJECT-TYPE
SYNTAX MsTransferMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index used to group statistics per Transfer method."
::= { msTransferEntry 1 }
msTransferSentMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages sent since MS initialization,
per Transfer method."
::= { msTransferEntry 2 }
msTransferReceivedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received since MS initialization,
per Transfer method."
::= { msTransferEntry 3 }
msTransferSentVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages sent since MS initialization,
per Transfer method, measured in kilo-octets."
::= { msTransferEntry 4 }
msTransferReceivedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages received since MS initialization,
per Transfer method, measured in kilo-octets."
::= { msTransferEntry 5 }
msTransfers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current tranfers to/from the MS, per Transfert method."
::= { msTransferEntry 6 }
msAccumulatedTransfers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of transfers to/from the MS since MS initialization,
per Transfer method."
::= { msTransferEntry 7 }
msLastTransfer OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since the last time that a message was transferred to/from the MS,
per Transfer method."
::= { msTransferEntry 8 }
msRejectedTransfers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Transfers that failed since MS
initialization, per Transfer method."
::= { msTransferEntry 9 }
msTransferFailureReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason, if any, for the last Transfer that failed.
An empty string indicates that
the last Transfer was successful. If no Transfer attempt
has been made since the MS was initialized the value
should be 'never'."
::= { msTransferEntry 10 }
-- We have introduced the notion of Groups of Users to avoid
-- dumping a large table of Users each time we want some detailed
-- statistics about the MS.
--
-- In the case of "Berkeley Mailboxes" a group could correspond to UNIX groups.
-- In the case of the "Solstice X.400 MS", we have already introduced
-- this notion of Group of Users.
--
-- If the MS does not support the notion of Group of Users or if a User
-- does not belong to any group, then the User should be added to the
-- dummy "anonymous" group.
msGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding information specific to each Group of Users."
::= { ms 4 }
msGroupEntry OBJECT-TYPE
SYNTAX MsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each Group of Users."
INDEX { applIndex, msGroupIndex }
::= { msGroupTable 1 }
MsGroupEntry ::= SEQUENCE {
msGroupIndex
INTEGER,
msGroupUsers
Gauge32,
msGroupMessages
Counter32,
msGroupVolume
Counter32,
msGroupUsers,
Gauge32,
msGroupName
DisplayString
}
msGroupIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with a Group of Users for a given MS."
::= { msGroupEntry 1 }
msGroupMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages stored for this Group of Users."
::= { msGroupEntry 2 }
msGroupVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages stored for this Group of Users,
measured in kilo-octets."
::= { msGroupEntry 3 }
msGroupUsers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Users in this Group."
::= { msGroupEntry 4 }
msGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A descriptive name for the Group of Users."
::= { msGroupEntry 5 }
-- msUserTable
msUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding information specific to each User."
::= { ms 5 }
msUserEntry OBJECT-TYPE
SYNTAX MsUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each User."
INDEX { applIndex, msGroupIndex, msUserIndex }
::= { msUserTable 1 }
MsUserEntry ::= SEQUENCE {
msUserIndex
INTEGER,
msUserMessages
Counter32,
msUserVolume
Counter32,
msUserFolders
Gauge32,
msUserName
DisplayString
}
msUserIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with a User."
::= { msUserEntry 1 }
msUserMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages stored for this User."
::= { msUserEntry 2 }
msUserVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages stored for this User,
measured in kilo-octets."
::= { msUserEntry 3 }
msUserFolders OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Folders this User owns."
::= { msUserEntry 4 }
msUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A descriptive name for the User."
::= { msUserEntry 5 }
-- msFolderTable:
--
-- A message can be in 4 different states: new, listed, processed, pending.
-- A pending message is a message with the deletion flag set (see IMAP)
--
-- Question: Is is possible to have an complete of the Folders for a
-- a given User? In an X.500 DSA?
--
-- In the case of the MS "Berkeley Mailboxes", there will be at least
-- one Folder: the INBOX Folder.
-- The IMAP could perhaps learn the Folders accessed by a User?
-- And what about the subsribed Folders?
msFolderTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsFolderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding information specific to each Folder."
::= { ms 6 }
msFolderEntry OBJECT-TYPE
SYNTAX MsFolderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each Folder."
INDEX { applIndex, msGroupIndex, msUserIndex, msFolderIndex }
::= { msFolderTable 1 }
MsFolderEntry ::= SEQUENCE {
msFolderIndex
INTEGER,
msFolderNewMessages
Gauge32,
msFolderListedMessages
Gauge32,
msFolderProcessedMessages
Gauge32,
msFolderPendingMessages
Gauge32,
msFolderNewVolume
Gauge32,
msFolderListedVolume
Gauge32,
msFolderProcessedVolume
Gauge32,
msFolderPendingVolume
Gauge32,
msFolderCreation
TimeInterval,
msFolderLastNewMessage
TimeInterval,
msFolderAccesses
Gauge32,
msFolderAccumulatedAccesses
Counter32,
msFolderLastAccess
TimeInterval,
msFolderIsShared,
INTEGER,
msFolderName
DisplayString
}
msFolderIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with a Folder."
::= { msFolderEntry 1 }
msFolderNewMessages OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of new messages stored in this Folder."
::= { msFolderEntry 2 }
msFolderListedMessages OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of listed messages stored in this Folder."
::= { msFolderEntry 3 }
msFolderProcessedMessages OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of processed messages stored in this Folder."
::= { msFolderEntry 4 }
msFolderPendingMessages OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of pending messages stored in this Folder."
::= { msFolderEntry 5 }
msFolderNewVolume OBJECT-TYPE
SYNTAX Gauge32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of new messages stored in this Folder,
measured in kilo-octets."
::= { msFolderEntry 6 }
msFolderListedVolume OBJECT-TYPE
SYNTAX Gauge32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of listed messages stored in this Folder,
measured in kilo-octets."
::= { msFolderEntry 7 }
msFolderProcessedVolume OBJECT-TYPE
SYNTAX Gauge32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of processed messages stored in this Folder,
measured in kilo-octets."
::= { msFolderEntry 8 }
msFolderPendingVolume OBJECT-TYPE
SYNTAX Gauge32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of pending messages stored in this Folder,
measured in kilo-octets."
::= { msFolderEntry 9 }
msFolderCreation OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since the this Folder was created."
::= { msFolderEntry 10 }
msFolderLastNewMessage OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since the last new message was received in this Folder."
::= { msFolderEntry 11 }
msFolderAccesses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current accesses to this Folder."
::= { msFolderEntry 12 }
msFolderAccumulatedAccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accumulated accesses to this Folder."
::= { msFolderEntry 13 }
msFolderLastAccess OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since a User last accessed this Folder."
::= { msFolderEntry 14 }
msFolderIsShared OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"yes(1) if this Folder is shared by many Users."
::= { msFolderEntry 15 }
msFolderName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A descriptive name for the Folder."
::= { msFolderEntry 16 }
-- The msUserAccessTable provide some statitics about the usage
-- of the MS per Access method.
msUserAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF msGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding statistics specific to each User per
Access method."
::= { ms 7 }
msUserAccessEntry OBJECT-TYPE
SYNTAX MsUserAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated with each User per Access method."
INDEX { applIndex, msGroupIndex, msUserIndex, msUserAccessIndex }
::= { msUserAccessTable 1 }
MsUserAccessEntry ::= SEQUENCE {
msUserAccessIndex,
MsAccessMethod,
msUserAccessListedMessages
Counter32,
msUserAccessFetchedMessages
Counter32,
msUserAccessDeletedMessages
Counter32,
msUserAccessListedVolume
Counter32,
msUserAccessFetchedVolume
Counter32,
msUserAccessDeletedVolume
Counter32,
msUserAccesses
Gauge32,
msUserAccumulatedAccesses
Counter32,
msUserLastAccess
TimeInterval,
msUserAccumulatedAccessTime
TimeInterval,
msUserRejectedAccesses
Counter32,
msUserAccessRejectionReason
DisplayString
}
msUserAccessIndex OBJECT-TYPE
SYNTAX MsAccessMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index used to group statistics per Access method."
::= { msUserAccessEntry 1 }
msUserAccessListedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages listed since MS initialization,
per User and per Access method."
::= { msUserAccessEntry 2 }
msUserAccessFetchedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages fetched since MS initialization,
per User and per Access method."
::= { msUserAccessEntry 3 }
msUserAccessDeletedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages deleted since MS initialization,
per User and per Access method."
::= { msUserAccessEntry 4 }
msUserAccessListedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages listed since MS initialization,
per User and per Access method, measured in kilo-octets."
::= { msUserAccessEntry 5 }
msUserAccessFetchedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages fetched since MS initialization,
per User and per Access method, measured in kilo-octets."
::= { msUserAccessEntry 6 }
msUserAccessDeletedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages deleted since MS initialization,
per User and per Access method, measured in kilo-octets."
::= { msUserAccessEntry 7 }
msUserAccesses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current accesses per User per Access method."
::= { msUserAccessEntry 8 }
msUserAccumulatedAccesses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of accesses to the MS since MS initialization,
per User and per Access method."
::= { msUserAccessEntry 9 }
msUserLastAccess OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since the last time that the MS was accessed,
per User and per Access method."
::= { msUserAccessEntry 10 }
msUserAccumulatedAccessTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time this User was connected to the
MS since MS initialization, per Access method."
::= { msUserAccessEntry 11 }
msUserRejectedAccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of accesses the MS has rejected since MS
initialization, per User and per Access method."
::= { msUserAccessEntry 12 }
msUserAccessRejectedReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason, if any, for the last access this
MS refused for that User. An empty string indicates that
the last attempt was successful. If no access attempt
has been made since the MS was initialized the value
should be 'never'."
::= { msUserAccessEntry 13 }
-- The msUserTransferTable provide some statitics about the usage
-- of the MS per User and per Transfer method.
--
-- When the MS application does not communicate with the MTA
-- (like "Berkeley Mailboxes"), there will no entry in this table.
msUserTransferTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsUserTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding statistics per User and per
Transfer method."
::= { ms 8 }
msUserTransferEntry OBJECT-TYPE
SYNTAX MsUserTransferEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry associated per User and per Transfer method."
INDEX { applIndex, msGroupIndex, msUserIndex, msUserTransferIndex }
::= { msUserTransferTable 1 }
MsUserTransferEntry ::= SEQUENCE {
msUserTransferIndex,
MsTransferMethod,
msUserTransferSentMessages
Counter32,
msUserTransferReceivedMessages
Counter32,
msUserTransferSentVolume
Counter32,
msUserTransferReceivedVolume
Counter32,
msUserTransfers
Gauge32,
msUserAccumulatedTranfers,
Counter32,
msUserLastTransfer
TimeInterval,
msUserFailedTransfers
Counter32,
msUserTransferFailureReason
DisplayString
}
msUserTransferIndex OBJECT-TYPE
SYNTAX MsTransferMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index used to group statistics per Transfer method."
::= { msUserTransferEntry 1 }
msUserTransferSentMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages sent since MS initialization,
per User and per Transfer method."
::= { msUserTransferEntry 2 }
msUserTransferReceivedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received since MS initialization,
per User and per Transfer method."
::= { msUserTransferEntry 3 }
msUserTransferSentVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages sent since MS initialization,
per User and per Transfer method, measured in kilo-octets."
::= { msUserTransferEntry 4 }
msUserTransferReceivedVolume OBJECT-TYPE
SYNTAX Counter32
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of messages received since MS initialization,
per User and per Transfer method, measured in kilo-octets."
::= { msUserTransferEntry 5 }
msUserTransfers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current tranfers to/from the MS,
per User and per Transfert method."
::= { msUserTransferEntry 6 }
msUserAccumulatedTransfers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of transfers to/from the MS since MS initialization,
per User and per Transfer method."
::= { msUserTransferEntry 7 }
msUserLastTransfer OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time since the last time that a message was transferred to/from the MS,
per User and per Transfer method."
::= { msUserTransferEntry 8 }
msUserRejectedTransfers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Transfers that failed since MS
initialization, per User and per Transfer method."
::= { msUserTransferEntry 9 }
msUserTransferFailureReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason, if any, for the last Transfer that failed.
An empty string indicates that
the last Transfer was successful. If no Transfer attempt
has been made since the MS was initialized the value
should be 'never'."
::= { msUserTransferEntry 10 }
-- The msAssocTable is useful to correlate the associations listed
-- in the assocTable (see RFC 1565) with a User, its Group
-- and the Folder he is currently accessing.
--
-- If we do not know the Folder he is currently accessing,
-- the value of the msAssocFolderIndex should be "-1".
msAssocTable OBJECT-TYPE
SYNTAX SEQUENCE OF msAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table holding information regarding the associations
for each User."
::= { ms 9 }
msAssocEntry OBJECT-TYPE
SYNTAX MsAssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry holding information regarding the associations
for each User."
INDEX { applIndex, msGroupIndex, msUserIndex, msAssocIndex, msAssocFolderIndex }
::= { msAssocTable 1}
MsAssocEntry ::= SEQUENCE {
msAssocIndex
INTEGER,
msAssocFolderIndex
INTEGER
}
msAssocIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of assocIndex."
::= { msAssocEntry 1 }
msAssocFolderIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of msFolderIndex."
::= { msAssocEntry 2 }
END