cmd/acct/runacct.sh

	runacct.sh revision 7c478bd95313f5f23a4c958a745db2134aa03244
#!/sbin/sh
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#       Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
#         All Rights Reserved
#   Copyright 2003 Sun Microsystems, Inc.  All rights reserved.
#   Use is subject to license terms.


#ident  "%Z%%M% %I% %E% SMI"    /* SVr4.0 1.9   */
#       "nitely accounting shell, should be run from cron (adm) at 4am"
#   "does process, connect, disk, and fee accounting"
#   "prepares command summaries"
#   "shell is restartable and provides reasonable diagnostics"
_adm=/var/adm
_nite=/var/adm/acct/nite
_sum=/var/adm/acct/sum
_wtmpx=/var/adm/wtmpx
PATH=/usr/lib/acct:/usr/bin:/usr/sbin
export PATH
_statefile=${_nite}/statefile
_active=${_nite}/active
_lastdate=${_nite}/lastdate
_date="`date +%m%d`"
_errormsg="\n\n************ ACCT ERRORS : see  ${_active}${_date}********\n\n"
_MIN_BLKS=500

cd ${_adm}
#       "make sure that 2 crons weren't started, or leftover problems"
date  > ${_nite}/lock1
chmod 400 ${_nite}/lock1
ln ${_nite}/lock1 ${_nite}/lock
if test $? -ne 0; then
    _lnkerr="\n\n*********** 2 CRONS or ACCT PROBLEMS***********\n\n\n"
    (date ; echo "$_lnkerr" ) | logger -p daemon.err
    echo "$_lnkerr" | mailx adm root
    echo "ERROR: locks found, run aborted" >> ${_active}
    rm -f ${_nite}/lock*
    exit 1
fi

# Check to see if there is enough space in /var/adm to do nitely accounting
#
_blocks=`df $_adm | sed 's/.*://' | awk '{ print $1 }'`
if [ "$_blocks" -le $_MIN_BLKS ];then
    echo "runacct: Insufficient space in $_adm ($_blocks blks); \c"
    echo "Terminating procedure"
    ( echo "runacct: Insufficient space in $_adm ($_blocks blks); \c"
    echo "Terminating procedure" ) > /tmp/accounting_tmpfile
    cat /tmp/accounting_tmpfile >> ${_active}
        cat /tmp/accounting_tmpfile | logger -p daemon.err
        mailx root adm < /tmp/accounting_tmpfile
        rm /tmp/accounting_tmpfile

    rm -f ${_nite}/lock*
    exit 1
fi


case $# in
0)
#   "as called by the cron each day"
    if test ! -r ${_lastdate} ; then
        echo "0000" > ${_lastdate}
    fi
    if test "${_date}" = "`cat ${_lastdate}`"; then
        (date; echo "${_errormsg}") | logger -p daemon.err
        echo "${_errormsg}" | mailx root adm
        echo "ERROR: acctg already run for `date`: check ${_lastdate}" >> ${_active}
        rm -f ${_nite}/lock*
        mv ${_active} ${_active}${_date}
        exit 1
    fi
    echo ${_date} > ${_lastdate}
    echo "SETUP" > ${_statefile}
    nulladm ${_active}
    echo ${_date} > ${_active}    # debuging
    echo "\n\n\n\n\n**********  SYSTEM ACCOUNTING STARTED `date`  **********\n\n\n\n\n" | logger -p daemon.notice
    echo ${_date} > ${_active}    # debuging
    ;;

1)
#   "runacct MMDD  (date)  will restart at current state"
    _date=$1
    _errormsg="\n\n************ ACCT ERRORS : see  ${_active}${_date}********\n\n"
    echo "restarting acctg for ${_date} at `cat ${_statefile}`" >> ${_active}
    echo "\n\n\n\n\n********** SYSTEM ACCOUNTING RESTARTED `date` **********\n\n\n\n\n" | logger -p daemon.notice
    ;;

2)
#   "runacct MMDD STATE  restart at specified state"
    _date=$1
    _errormsg="\n\n************ ACCT ERRORS : see  ${_active}${_date}********\n\n"
    echo "restarting acctg for ${_date} at $2" >> ${_active}
    echo "previous state was `cat ${_statefile}`" >> ${_active}
    echo "$2" > ${_statefile}
    echo "\n\n\n\n\n********** SYSTEM ACCOUNTING RESTARTED `date` **********\n\n\n\n\n" | logger -p daemon.notice
    ;;
*)
    (date; echo "${_errormsg}") | logger -p daemon.err
    echo "${_errormsg}" | mailx root adm
    echo "ERROR: runacct called with invalid arguments" > ${_active}
    rm -f ${_nite}/lock*
    mv ${_active} ${_active}${_date}
    exit 1
    ;;
esac


#   "processing is broken down into seperate, restartable states"
#   "the statefile is updated at the end of each state so that the"
#   "next loop through the while statement switches to the next state"
while [ 1 ]
do
case "`cat ${_statefile}`" in
SETUP)

cd ${_adm}

(date ; ls -l fee pacct* ${_wtmpx}* ) >> ${_active}

#   "switch current pacct file"
turnacct switch
_rc=$?
if test ${_rc} -ne 0; then
    (date ; echo "${_errormsg}" ) | logger -p daemon.err
    echo "${_errormsg}" | mailx root adm
    echo "ERROR: turnacct switch returned rc=${_rc}" >> ${_active}
    rm -f ${_nite}/lock*
    mv ${_active} ${_active}${_date}
    exit 1
fi

#   " give pacct files unique names for easy restart "
for _i in pacct?*
do
    if [ "${_i}" = "pacct?*" ]
    then
        rm -f ${_nite}/lock*
        mv ${_active} ${_active}${_date}
        exit 1
    fi
    if test -r S${_i}.${_date} ; then
         (date ; echo "${_errormsg}" ) | logger -p daemon.err
        echo "${_errormsg}" | mailx root adm
        echo "ERROR: S${_i}.${_date} already exists" >> ${_active}
        echo "file setups probably already run" >> ${_active}
        rm -f ${_nite}/lock*
        mv ${_active} ${_active}${_date}
        exit 1
    fi
    mv ${_i} S${_i}.${_date}
done


#   "add current time on end"
if test -r ${_nite}/wtmpx.${_date} ; then
    (date ; echo "${_errormsg}" ) | logger -p daemon.err
    echo "${_errormsg}" | mailx root adm
    echo "ERROR: ${_nite}/wtmpx.${_date} already exists: run setup manually" > ${_active}
    rm -f ${_nite}/lock*
    mv ${_active} ${_active}${_date}
    exit 1
fi
closewtmp   # fudge a DEAD_PROCESS for /var/wtmpx
cp ${_wtmpx} ${_nite}/${_date}.wtmpx
acctwtmp "runacct" ${_nite}/${_date}.wtmpx
nulladm ${_wtmpx}
utmp2wtmp   # fudge active user from utmpx to wtmpx

echo "files setups complete" >> ${_active}
echo "WTMPFIX" > ${_statefile}
;;

WTMPFIX)
#   "verify the integrity of the wtmpx file"
#   "wtmpfix will automatically fix date changes"
cd ${_nite}
nulladm tmpwtmp wtmperror
wtmpfix < ${_date}.wtmpx > tmpwtmp 2>wtmperror
if test $? -ne 0 ; then
    (date ; echo "${_errormsg}") | mailx root adm
    echo "${_errormsg}" | logger -p daemon.err
    echo "ERROR: wtmpfix errors see ${_nite}/wtmperror${_date}" >> ${_active}
    rm -f ${_nite}/lock*
    mv ${_active} ${_active}${_date}
    mv wtmperror wtmperror${_date}
    exit 1
fi

echo "wtmpx processing complete" >> ${_active}
echo "CONNECT" > ${_statefile}
;;


CONNECT)
#   "produce connect records"
#   "the lineuse and reboots files are used by prdaily"
cd ${_nite}
nulladm lineuse reboots log ctacct.${_date}
acctcon -l lineuse -o reboots < tmpwtmp  2> log > ctacct.${_date}

# if the following test is true, then pnpsplit complained about
# the year and holidays not being up to date.  This used to be
# a fatal error, but now it will continue to process the accounting.
#
if test -s log ; then
    (date ; cat ${_nite}/log) | mailx adm root
    echo "${_errormsg}" | logger -p daemon.err
    cat ${_nite}/log >> ${_active}${_date}
fi

echo "connect acctg complete" >> ${_active}
echo "PROCESS" > ${_statefile}
;;


PROCESS)
#   "correlate Spacct and ptacct files by number"
#   "will not process Spacct file if corresponding ptacct exists"
#   "remove the ptacct file to rurun the Spacct file"
#   "if death occurs here, rerunacct should remove last ptacct file"

cd ${_nite}
for _Spacct in ${_adm}/Spacct*.${_date}
do
    _ptacct=`basename ${_Spacct} | sed 's/Sp/pt/'`
    if test -s ${_ptacct}; then
        echo "WARNING: accounting already run for ${_Spacct}" \
            >> ${_active}
        echo "WARNING: remove ${_nite}/${_ptacct} to rerun" \
            >> ${_active}
    else
        nulladm ${_ptacct}
        acctprc < ${_Spacct} > ${_ptacct}

        echo "process acctg complete for ${_Spacct}" >> ${_active}
    fi
done
echo "all process actg complete for ${_date}" >> ${_active}
echo "MERGE" > ${_statefile}
;;


MERGE)
cd ${_nite}
#   "merge ctacct and ptacct files together"
acctmerg ptacct*.${_date} < ctacct.${_date} > daytacct

echo "tacct merge to create daytacct complete" >> ${_active}
echo "FEES" > ${_statefile}
;;


FEES)
cd ${_nite}
#   "merge in fees"
if test -s ${_adm}/fee; then
    cp daytacct tmpdayt
    sort +0n +2 ${_adm}/fee | acctmerg -i | acctmerg tmpdayt  > daytacct
    echo "merged fees" >> ${_active}
    rm -f tmpdayt
else
    echo "no fees" >> ${_active}
fi
echo "DISK" > ${_statefile}
;;


DISK)
cd ${_nite}
#   "the last act of any disk acct procedure should be to mv its"
#   "entire output file to disktacct, where it will be picked up"
if test -r disktacct; then
    cp daytacct tmpdayt
    acctmerg disktacct  < tmpdayt > daytacct
    echo "merged disk records" >> ${_active}
    rm -f tmpdayt
    mv disktacct /tmp/disktacct.${_date}
else
    echo "no disk records" >> ${_active}
fi
echo "MERGETACCT" > ${_statefile}
;;

MERGETACCT)
cd ${_adm}/acct
#   "save each days tacct file in sum/tacct.${_date}"
#   "if sum/tacct gets corrupted or lost, could recreate easily"
#   "the monthly acctg procedure should remove all sum/tacct files"
cp nite/daytacct sum/tacct${_date}
if test ! -r sum/tacct; then
    echo "WARNING: recreating ${_adm}/sum/tacct " >> ${_active}
    nulladm sum/tacct
fi

#   "merge in todays tacct with the summary tacct"
rm -f sum/tacctprev
cp sum/tacct sum/tacctprev
acctmerg sum/tacctprev  < sum/tacct${_date} > sum/tacct

echo "updated sum/tacct" >> ${_active}
echo "CMS" > ${_statefile}
;;


CMS)
cd ${_adm}/acct
#   "do command summaries"
nulladm sum/daycms
if test ! -r sum/cms; then
    nulladm sum/cms
    echo "WARNING: recreating ${_adm}/sum/cms " >> ${_active}
fi
cp sum/cms sum/cmsprev
acctcms ${_adm}/Spacct*.${_date}  > sum/daycms
acctcms -s sum/daycms sum/cmsprev  > sum/cms
acctcms -a -s sum/daycms | sed -n 1,56p  > nite/daycms
acctcms -a -s sum/cms | sed -n 1,56p  > nite/cms
lastlogin
echo "command summaries complete" >> ${_active}
echo "USEREXIT" > ${_statefile}
;;


USEREXIT)
#   "any installation dependant accounting programs should be run here"
[ -s /usr/lib/acct/runacct.local ] && /usr/lib/acct/runacct.local

echo "CLEANUP" > ${_statefile}
;;


CLEANUP)
cd ${_adm}/acct
#   " finally clear files; could be done next morning if desired"
nulladm ${_adm}/fee
rm -f ${_adm}/Spacct*.${_date}
#   "put reports onto a file"
prdaily >> sum/rprt${_date};
rm -f nite/lock*
rm -f nite/ptacct*.${_date} nite/ctacct.${_date}
mv -f nite/${_date}.wtmpx nite/owtmpx
rm -f nite/wtmperror${_date} nite/active${_date} nite/tmpwtmp
echo "system accounting completed at `date`" >> ${_active}
echo "********** SYSTEM ACCOUNTING COMPLETED `date` **********" | logger -p daemon.notice
echo "COMPLETE" > ${_statefile}
exit 0
;;

*)
    (date;echo "${_errormsg}") | logger -p daemon.err
    echo "${_errormsg}" | mailx adm root
    echo "ERROR: invalid state, check ${_statefile}" >> active
    rm -f ${_nite}/lock*
    mv ${_active} ${_active}${_date}
    exit 1
    ;;
esac
done


#   " runacct is normally called with no arguments from the cron"
#   " it checks its own locks to make sure that 2 crons or previous"
#   " problems have not occured"

#   " runacct uses the statefile to record its progress"
#   " each state updates the statefile upon completion"
#   " then the next loop though the while picks up the new state"

#   " to restart this shell,  check the active file for diagnostics"
#   " fix up any corrupted data (ie. bad pacct or wtmpx files)"
#   " if runacct detected the error it removes the locks"
#   " remove the locks if necessary, otherwise runacct will complain"
#   " the lastdate file should be removed or changed"
#   " restart runacct at current state with:  runacct MMDD"
#   " to override the statefile: runacct MMDD STATE"


#   " if runacct has been executed after the latest failure"
#   " ie. it ran ok today but failed yesterday"
#   " the statefile will not be correct"
#   " check the active files and restart properly"

#   " if runacct failed in the PROCESS state, remove the last"
#   " ptacct file because it may not be complete"

#   " if shell has failed several days, do SETUP manually"
#   " then rerun runacct once for each day failed"
#   " could use fwtmp here to split up wtmpx file correctly"

#   " normally not a good idea to restart the SETUP state"
#   " should be done manually, or just cleanup first"


#   " FILE USAGE:   all files in /var/adm/acct/nite unless specified"

#   " statefile records progess of runacct"
#   " lastdate  last day runacct ran in date +%m%d format"
#   " lock lock1    controls serial use of runacct"
#   " active    place for all descriptive and error messages"
#   " fd2log    fd2 output for runacct ( see cron entry ) "
#   " MMDD.wtmpx    owtmpx yesterdays wtmpx file"
#   " tmpwtmp   yesterdays wtmp corrected by wtmpfix"
#   " wtmperror place for wtmpfix error messages"
#   " lineuse   lineusage report used in prdaily"
#   " reboots   reboots report used in prdaily"
#   " log       place for error messages from acctcon1"
#   " ctacct.MMDD   connect tacct records for MMDD"
#   " ptacct.n.MMDD process tacct records n files for MMDD"
#   " daytacct  total tacct records for this days accounting"
#   " disktacct disk tacct records produced by disk shell"
#   " daycms    ascii daily command summary used by prdaily"
#   " cms       acsii total command summary used by prdaily"

#   " following files in /var/adm directory"

#   " fee       output from chargefee program"
#   " pacct     active pacct file"
#   " pacctn    switched pacct files"
#   " Spacctn.MMDD  pacct files for MMDD after SETUP state"
#   " wtmpx     active wtmpx file"

#   " following files in /var/adm/acct/sum"

#   " loginlog  output of lastlogin used in prdaily"
#   " tacct     total tacct file for current fiscal"
#   " tacct.MMDD    tacct file for day MMDD"
#   " cms       total cms file for current fiscal"
#   " rprt.MMDD output of prdaily program"
#   " MMDD.wtmpx    saved copy of wtmpx for MMDD"
#   " pacct.MMDD    concatenated version of all pacct files for MMDD"
#   " cmsprev   total cms file without latest update"
#   " tacctprev total tacct file without latest update"
#   " daycms    cms files for todays usage"