am335x.dtsi revision 199767f8919635c4928607450d9e0abb932109ce
/*-
* Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&AINTC>;
SOC: am335x {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
bus-frequency = <0>;
AINTC: interrupt-controller@48200000 {
compatible = "ti,aintc";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
reg = < 0x48200000 0x1000 >;
};
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
};
scm@44e10000 {
compatible = "ti,scm";
reg = < 0x44e10000 0x2000 >;
};
prcm@44E00000 {
compatible = "am335x,prcm";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x44E00000 0x1300 >;
};
dmtimers@44E05000 {
compatible = "ti,am335x-dmtimer";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x44E05000 0x1000
0x44E31000 0x1000
0x48040000 0x1000
0x48042000 0x1000
0x48044000 0x1000
0x48046000 0x1000
0x48048000 0x1000
0x4804A000 0x1000 >;
interrupts = < 66 67 68 69 92 93 94 95 >;
interrupt-parent = <&AINTC>;
};
rtc: rtc@44E3E000 {
compatible = "ti,da830-rtc";
reg = <0x44E3E000 0x1000>;
interrupts = < 75 76 >;
interrupt-parent = <&AINTC>;
};
adc0: adc@44E0D000 {
compatible = "ti,adc";
reg = <0x44E0D000 0x2000>;
interrupts = < 16 >;
interrupt-parent = <&AINTC>;
};
wdt1@44E35000 {
compatible = "ti,omap3-wdt";
reg = <0x44E35000 0x1000>;
interrupts = <91>;
interrupt-parent = <&AINTC>;
};
GPIO: gpio {
#gpio-cells = <3>;
compatible = "ti,gpio";
gpio-controller;
reg =< 0x44E07000 0x1000
0x4804C000 0x1000
0x481AC000 0x1000
0x481AE000 0x1000 >;
interrupts = < 96 97 98 99 32 33 62 63 >;
interrupt-parent = <&AINTC>;
interrupt-controller;
#interrupt-cells = <1>;
};
uart0: serial@44E09000 {
compatible = "ti,ns16550";
reg = <0x44E09000 0x1000>;
reg-shift = <2>;
interrupts = < 72 >;
interrupt-parent = <&AINTC>;
clock-frequency = < 48000000 >;
uart-device-id = < 0 >;
};
uart1: serial@48022000 {
compatible = "ti,ns16550";
reg = <0x48022000 0x1000>;
reg-shift = <2>;
interrupts = < 73 >;
interrupt-parent = <&AINTC>;
clock-frequency = < 48000000 >;
uart-device-id = < 1 >;
status = "disabled";
};
uart2: serial@48024000 {
compatible = "ti,ns16550";
reg = <0x48024000 0x1000>;
reg-shift = <2>;
interrupts = < 74 >;
interrupt-parent = <&AINTC>;
clock-frequency = < 48000000 >;
uart-device-id = < 2 >;
status = "disabled";
};
uart3: serial@481a6000 {
compatible = "ti,ns16550";
reg = <0x481A6000 0x1000>;
reg-shift = <2>;
interrupts = < 44 >;
interrupt-parent = <&AINTC>;
clock-frequency = < 48000000 >;
uart-device-id = < 3 >;
status = "disabled";
};
uart4: serial@481a8000 {
compatible = "ti,ns16550";
reg = <0x481A8000 0x1000>;
reg-shift = <2>;
interrupts = < 45 >;
interrupt-parent = <&AINTC>;
clock-frequency = < 48000000 >;
uart-device-id = < 4 >;
status = "disabled";
};
uart5: serial@481aa000 {
compatible = "ti,ns16550";
reg = <0x481AA000 0x1000>;
reg-shift = <2>;
interrupts = < 46 >;
interrupt-parent = <&AINTC>;
clock-frequency = < 48000000 >;
uart-device-id = < 5 >;
status = "disabled";
};
edma3@49000000 {
compatible = "ti,edma3";
reg =< 0x49000000 0x100000 /* Channel Controller Regs */
0x49800000 0x100000 /* Transfer Controller 0 Regs */
0x49900000 0x100000 /* Transfer Controller 1 Regs */
0x49a00000 0x100000 >; /* Transfer Controller 2 Regs */
interrupts = <12 13 14>;
interrupt-parent = <&AINTC>;
};
mmchs0@48060000 {
compatible = "ti,omap3-hsmmc", "ti,mmchs";
reg =<0x48060000 0x1000 >;
interrupts = <64>;
interrupt-parent = <&AINTC>;
mmchs-device-id = <0>;
mmchs-wp-gpio-pin = <0xffffffff>;
ti,dual-volt;
};
mmchs1@481D8000 {
compatible = "ti,omap3-hsmmc", "ti,mmchs";
reg =<0x481D8000 0x1000 >;
interrupts = <28>;
interrupt-parent = <&AINTC>;
mmchs-device-id = <1>;
mmchs-wp-gpio-pin = <0xffffffff>;
status = "disabled";
};
enet0: ethernet@4A100000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,cpsw";
reg = <0x4A100000 0x4000>;
interrupts = <40 41 42 43>;
interrupt-parent = <&AINTC>;
phy-handle = <&phy0>;
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,cpsw-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
};
};
};
i2c0: i2c@44e0b000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,i2c";
reg =< 0x44e0b000 0x1000 >;
interrupts = <70>;
interrupt-parent = <&AINTC>;
i2c-device-id = <0>;
};
i2c1: i2c@4802a000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,i2c";
reg =< 0x4802a000 0x1000 >;
interrupts = <71>;
interrupt-parent = <&AINTC>;
i2c-device-id = <1>;
};
i2c2: i2c@4819c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,i2c";
reg =< 0x4819c000 0x1000 >;
interrupts = <30>;
interrupt-parent = <&AINTC>;
i2c-device-id = <2>;
};
pwm@48300000 {
compatible = "ti,am335x-pwm";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x48300000 0x100 /* PWMSS0 */
0x48300100 0x80 /* eCAP0 */
0x48300180 0x80 /* eQEP0 */
0x48300200 0x60 /* ePWM0 */
>;
interrupts = <86 58>; /* ePWM0INT, ePWM0_TZINT */
interrupt-parent = <&AINTC>;
pwm-device-id = <0>;
};
pwm@48302000 {
compatible = "ti,am335x-pwm";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x48302000 0x100 /* PWMSS1 */
0x48302100 0x80 /* eCAP1 */
0x48302180 0x80 /* eQEP1 */
0x48302200 0x60 /* ePWM1 */
>;
interrupts = <87 59>; /* ePWM1INT, ePWM1_TZINT */
interrupt-parent = <&AINTC>;
pwm-device-id = <1>;
};
pwm@48304000 {
compatible = "ti,am335x-pwm";
#address-cells = <1>;
#size-cells = <1>;
reg = < 0x48304000 0x100 /* PWMSS2 */
0x48304100 0x80 /* eCAP2 */
0x48304180 0x80 /* eQEP2 */
0x48304200 0x60 /* ePWM2 */
>;
interrupts = <88 60>; /* ePWM2INT, ePWM2_TZINT */
interrupt-parent = <&AINTC>;
pwm-device-id = <2>;
};
lcd: lcd@4830e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,am335x-lcd";
reg =< 0x4830e000 0x1000 >;
interrupts = <36>;
interrupt-parent = <&AINTC>;
};
usb@47400000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,musb-am33xx";
reg =< 0x47400000 0x1000 /* USBSS */
0x47401000 0x300 /* USB0 */
0x47401300 0x100 /* USB0_PHY */
0x47401400 0x400 /* USB0_CORE */
0x47401800 0x300 /* USB1 */
0x47401B00 0x100 /* USB1_PHY */
0x47401C00 0x400 /* USB1_CORE */
>;
interrupts = <17 18 19>;
interrupt-parent = <&AINTC>;
/* 1 - Host Mode, 0 - Device Mode */
modemask = <2>;
};
mbox0@480C8000 {
compatible = "am335x,system-mbox";
reg = < 0x480C8000 0x1000 >;
interrupts = <77>;
interrupt-parent = <&AINTC>;
};
spinlock0@480CA000 {
compatible = "am335x,spinlock";
reg = < 0x480CA000 0x1000 >;
};
pruss@4A300000 {
compatible = "ti,pruss-v2";
reg = <0x4A300000 0x80000>;
interrupt-parent = <&AINTC>;
interrupts = <20 21 22 23 24 25 26 27>;
};
};
};