event.c revision b9399240afdf3ec84188c614d403ff9a4fd66e93
/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* This MPM tries to fix the 'keep alive problem' in HTTP.
*
* After a client completes the first request, the client can keep the
* connection open to send more requests with the same socket. This can save
* significant overhead in creating TCP connections. However, the major
* disadvantage is that Apache traditionally keeps an entire child
* this MPM has a dedicated thread for handling both the Listening sockets,
* and all sockets that are in a Keep Alive status.
*
* The MPM assumes the underlying apr_pollset implementation is somewhat
* threadsafe. This currently is only compatible with KQueue and EPoll. This
* enables the MPM to avoid extra high level locking or having to wake up the
* listener thread when a keep-alive socket needs to be sent to it.
*
* This MPM does not perform well on older platforms that do not have very good
* threading, like Linux with a 2.4 kernel, but this does not matter, since we
* require EPoll or KQueue.
*
* For FreeBSD, use 5.3. It is possible to run this MPM on FreeBSD 5.2.1, if
* you use libkse (see `man libmap.conf`).
*
* For NetBSD, use at least 2.0.
*
* For Linux, you should use a 2.6 kernel, and make sure your glibc has epoll
* support compiled in.
*
*/
#include "apr.h"
#include "apr_portable.h"
#include "apr_strings.h"
#include "apr_file_io.h"
#include "apr_thread_proc.h"
#include "apr_signal.h"
#include "apr_thread_mutex.h"
#include "apr_poll.h"
#include "apr_ring.h"
#include "apr_queue.h"
#include "apr_atomic.h"
#define APR_WANT_STRFUNC
#include "apr_want.h"
#include "apr_version.h"
#include <unistd.h>
#endif
#endif
#endif
#ifdef HAVE_SYS_PROCESSOR_H
#endif
#if !APR_HAS_THREADS
#endif
#include "ap_config.h"
#include "httpd.h"
#include "http_main.h"
#include "http_log.h"
#include "http_config.h" /* for read_config */
#include "http_core.h" /* for get_remote_host */
#include "http_connection.h"
#include "ap_mpm.h"
#include "mpm_common.h"
#include "ap_listen.h"
#include "scoreboard.h"
#include "fdqueue.h"
#include "mpm_default.h"
#include "http_vhost.h"
#include "unixd.h"
#include "ap_skiplist.h"
#include <signal.h>
#include <limits.h> /* for INT_MAX */
#if HAVE_SERF
#include "mod_serf.h"
#include "serf.h"
#endif
/* Limit on the total --- clients will be locked out if more servers than
* this are needed. It is intended solely to keep the server from crashing
* when things get out of hand.
*
* We keep a hard maximum number of servers, for two reasons --- first off,
* in case something goes seriously wrong, we want to stop the fork bomb
* short of actually crashing the machine we're running on by filling some
* kernel table. Secondly, it keeps the size of the scoreboard file small
* enough that we can read the whole thing without worrying too much about
* the overhead.
*/
#ifndef DEFAULT_SERVER_LIMIT
#define DEFAULT_SERVER_LIMIT 16
#endif
/* Admin can't tune ServerLimit beyond MAX_SERVER_LIMIT. We want
* some sort of compile-time limit to help catch typos.
*/
#ifndef MAX_SERVER_LIMIT
#define MAX_SERVER_LIMIT 20000
#endif
/* Limit on the threads per process. Clients will be locked out if more than
* this are needed.
*
* We keep this for one reason it keeps the size of the scoreboard file small
* enough that we can read the whole thing without worrying too much about
* the overhead.
*/
#ifndef DEFAULT_THREAD_LIMIT
#define DEFAULT_THREAD_LIMIT 64
#endif
/* Admin can't tune ThreadLimit beyond MAX_THREAD_LIMIT. We want
* some sort of compile-time limit to help catch typos.
*/
#ifndef MAX_THREAD_LIMIT
#define MAX_THREAD_LIMIT 100000
#endif
#define apr_time_from_msec(x) (x * 1000)
#endif
#ifndef MAX_SECS_TO_LINGER
#define MAX_SECS_TO_LINGER 30
#endif
#define SECONDS_TO_LINGER 2
/*
* Actual definitions of config globals
*/
#ifndef DEFAULT_WORKER_FACTOR
#define DEFAULT_WORKER_FACTOR 2
#endif
static int threads_per_child = 0; /* Worker threads per child */
static int ap_daemons_to_start = 0;
static int min_spare_threads = 0;
static int max_spare_threads = 0;
static int ap_daemons_limit = 0;
static int max_workers = 0;
static int server_limit = 0;
static int thread_limit = 0;
static int had_healthy_child = 0;
static int dying = 0;
static int workers_may_exit = 0;
static int start_thread_may_exit = 0;
static int listener_may_exit = 0;
static int num_listensocks = 0;
in listener thread */
static int resource_shortage = 0;
static fd_queue_t *worker_queue;
static fd_queue_info_t *worker_queue_info;
static int mpm_state = AP_MPMQ_STARTING;
static apr_thread_mutex_t *timeout_mutex;
struct event_conn_state_t {
/** APR_RING of expiration timeouts */
/** the expiration time of the next keepalive timeout */
/** connection record this struct refers to */
conn_rec *c;
/** memory pool to allocate from */
apr_pool_t *p;
/** bucket allocator */
/** poll file descriptor information */
/** public parts of the connection state */
};
struct timeout_queue {
struct timeout_head_t head;
int count;
const char *tag;
};
/*
* Several timeout queues that use different timeouts, so that we always can
* simply append to the end.
* write_completion_q uses TimeOut
* keepalive_q uses KeepAliveTimeOut
* linger_q uses MAX_SECS_TO_LINGER
* short_linger_q uses SECONDS_TO_LINGER
*/
static apr_pollfd_t *listener_pollfd;
/*
* Macros for accessing struct timeout_queue.
* For TO_QUEUE_APPEND and TO_QUEUE_REMOVE, timeout_mutex must be held.
*/
#define TO_QUEUE_APPEND(q, el) \
do { \
(q).count++; \
} while (0)
#define TO_QUEUE_REMOVE(q, el) \
do { \
(q).count--; \
} while (0)
#define TO_QUEUE_INIT(q) \
do { \
(q).tag = #q; \
} while (0)
/*
* The pollset for sockets that are in any of the timeout queues. Currently
* some confusion can happen under high load if timeout queues and pollset
* get out of sync.
* XXX: It should be possible to make the lock unnecessary in many or even all
* XXX: cases.
*/
static apr_pollset_t *event_pollset;
#if HAVE_SERF
typedef struct {
} s_baton_t;
static serf_context_t *g_serf;
#endif
/* The structure used to pass unique initialization info to each thread */
typedef struct
{
int pid;
int tid;
int sd;
} proc_info;
/* Structure used to pass information to the thread responsible for
* creating the rest of the threads.
*/
typedef struct
{
int child_num_arg;
typedef enum
{
#if HAVE_SERF
, PT_SERF
#endif
} poll_type_e;
typedef struct
{
void *baton;
* allocated on first call to pre-config hook; located on
* subsequent calls to pre-config hook
*/
typedef struct event_retained_data {
int first_server_limit;
int first_thread_limit;
int module_loads;
int sick_child_detected;
int volatile is_graceful; /* set from signal handler */
int maxclients_reported;
/*
* The max child slot ever assigned, preserved across restarts. Necessary
* to deal with MaxRequestWorkers changes across AP_SIG_GRACEFUL restarts.
* We use this value to optimize routines that have to scan the entire
* scoreboard.
*/
int max_daemons_limit;
/*
* idle_spawn_rate is the number of children that will be spawned on the
* next maintenance cycle if there aren't enough idle servers. It is
* doubled up to MAX_SPAWN_RATE, and reset only when a cycle goes by
* without the need to spawn.
*/
int idle_spawn_rate;
#ifndef MAX_SPAWN_RATE
#define MAX_SPAWN_RATE (32)
#endif
static event_retained_data *retained;
#define ID_FROM_CHILD_THREAD(c, t) ((c * thread_limit) + t)
/* The event MPM respects a couple of runtime flags that can aid
* in debugging. Setting the -DNO_DETACH flag will prevent the root process
* from detaching from its controlling terminal. Additionally, setting
* the -DONE_PROCESS flag (which implies -DNO_DETACH) will get you the
* child_main loop running in the process which originally started up.
* This gives you a pretty nice debugging environment. (You'll get a SIGHUP
* early in standalone_main; just continue through. This is the server
* trying to kill off any child processes which it might have lying
* around --- Apache doesn't keep track of their pids, it just sends
* SIGHUP to the process group, ignoring it in the root process.
* Continue through and you'll be fine.).
*/
static int one_process = 0;
#ifdef DEBUG_SIGSTOP
int raise_sigstop_flags;
#endif
thread. Use this instead */
static pid_t parent_pid;
static apr_os_thread_t *listener_os_thread;
/* The LISTENER_SIGNAL signal will be sent from the main thread to the
* listener thread to wake it up for graceful termination (what a child
* process from an old generation does when the admin does "apachectl
* graceful"). This signal will be blocked in all threads of a child
* process except for the listener thread.
*/
#define LISTENER_SIGNAL SIGHUP
/* An array of socket descriptors in use by each thread used to
* perform a non-graceful (forced) shutdown of the server.
*/
static apr_socket_t **worker_sockets;
static void disable_listensocks(int process_slot)
{
int i;
for (i = 0; i < num_listensocks; i++) {
}
}
static void enable_listensocks(int process_slot)
{
int i;
"Accepting new connections again: "
"%u active conns (%u lingering/%u clogged/%u suspended), "
"%u idle workers",
for (i = 0; i < num_listensocks; i++)
/*
* XXX: This is not yet optimal. If many workers suddenly become available,
* XXX: the parent may kill some processes off too soon.
*/
}
static void close_worker_sockets(void)
{
int i;
for (i = 0; i < threads_per_child; i++) {
if (worker_sockets[i]) {
worker_sockets[i] = NULL;
}
}
}
static void wakeup_listener(void)
{
listener_may_exit = 1;
if (!listener_os_thread) {
/* XXX there is an obscure path that this doesn't handle perfectly:
* right after listener thread is created but before
* listener_os_thread is set, the first worker thread hits an
* error and starts graceful termination
*/
return;
}
/* unblock the listener if it's waiting for a worker */
/*
* we should just be able to "kill(ap_my_pid, LISTENER_SIGNAL)" on all
* platforms and wake up the listener thread since it is the only thread
* with SIGHUP unblocked, but that doesn't work on Linux
*/
#ifdef HAVE_PTHREAD_KILL
#else
#endif
}
#define ST_INIT 0
#define ST_GRACEFUL 1
#define ST_UNGRACEFUL 2
static int terminate_mode = ST_INIT;
static void signal_threads(int mode)
{
if (terminate_mode == mode) {
return;
}
/* in case we weren't called from the listener thread, wake up the
* listener thread
*/
/* for ungraceful termination, let the workers exit now;
* for graceful termination, the listener thread will notify the
* workers to exit once it has stopped accepting new connections
*/
if (mode == ST_UNGRACEFUL) {
workers_may_exit = 1;
close_worker_sockets(); /* forcefully kill all current connections */
}
}
{
*rv = APR_SUCCESS;
switch (query_code) {
case AP_MPMQ_MAX_DAEMON_USED:
break;
case AP_MPMQ_IS_THREADED:
*result = AP_MPMQ_STATIC;
break;
case AP_MPMQ_IS_FORKED:
break;
case AP_MPMQ_IS_ASYNC:
*result = 1;
break;
case AP_MPMQ_HAS_SERF:
*result = 1;
break;
*result = server_limit;
break;
*result = thread_limit;
break;
case AP_MPMQ_MAX_THREADS:
break;
*result = 0;
break;
break;
*result = 0;
break;
break;
break;
case AP_MPMQ_MAX_DAEMONS:
break;
case AP_MPMQ_MPM_STATE:
break;
case AP_MPMQ_GENERATION:
break;
default:
*rv = APR_ENOTIMPL;
break;
}
return OK;
}
{
}
else {
}
}
{
}
{
" (quiescing)" : "");
/* Don't forget about this exiting child process, or we
* won't be able to kill it if it doesn't exit by the
* time the server is shut down.
*/
}
static const char *event_get_name(void)
{
return "event";
}
/* a clean exit from a child with proper cleanup */
static void clean_child_exit(int code)
{
if (pchild) {
}
if (one_process) {
event_note_child_killed(/* slot */ 0, 0, 0);
}
}
{
clean_child_exit(0);
}
/*****************************************************************
* Connection structures and accounting...
*/
static int child_fatal;
/* volatile because they're updated from a signal handler */
static int volatile shutdown_pending;
static int volatile restart_pending;
{
case CONN_STATE_LINGER_NORMAL:
case CONN_STATE_LINGER_SHORT:
break;
case CONN_STATE_SUSPENDED:
break;
default:
break;
}
return APR_SUCCESS;
}
/*
* ap_start_shutdown() and ap_start_restart(), below, are a first stab at
* functions to initiate shutdown or restart without relying on signals.
* Previously this was initiated in sig_term() and restart() signal handlers,
* e.g. on Win32, from the service manager. Now the service manager can
* call ap_start_shutdown() or ap_start_restart() as appropiate. Note that
* these functions can also be called by the child processes, since global
* variables are no longer used to pass on the required action to the parent.
*
* These should only be called from the parent process itself, since the
* parent process will use the shutdown_pending and restart_pending variables
* to determine whether to shutdown or restart. The child process should
* call signal_parent() directly to tell the parent to die -- this will
* cause neither of those variable to be set, which the parent will
* assume means something serious is wrong (which it will be, for the
* child to force an exit) and so do an exit anyway.
*/
static void ap_start_shutdown(int graceful)
{
if (shutdown_pending == 1) {
/* Um, is this _probably_ not an error, if the user has
* tried to do a shutdown twice quickly, so we won't
* worry about reporting it.
*/
return;
}
shutdown_pending = 1;
}
/* do a graceful restart if graceful == 1 */
static void ap_start_restart(int graceful)
{
if (restart_pending == 1) {
/* Probably not an error - don't bother reporting it */
return;
}
restart_pending = 1;
}
{
}
{
}
static void set_signals(void)
{
#ifndef NO_USE_SIGACTION
#endif
if (!one_process) {
}
#ifndef NO_USE_SIGACTION
"sigaction(SIGTERM)");
#ifdef AP_SIG_GRACEFUL_STOP
#endif
#ifdef SIGINT
"sigaction(SIGINT)");
#endif
#ifdef SIGXCPU
"sigaction(SIGXCPU)");
#endif
#ifdef SIGXFSZ
/* For systems following the LFS standard, ignoring SIGXFSZ allows
* a write() beyond the 2GB limit to fail gracefully with E2BIG
* rather than terminate the process. */
"sigaction(SIGXFSZ)");
#endif
#ifdef SIGPIPE
"sigaction(SIGPIPE)");
#endif
/* we want to ignore HUPs and AP_SIG_GRACEFUL while we're busy
* processing one */
"sigaction(SIGHUP)");
#else
if (!one_process) {
#ifdef SIGXCPU
#endif /* SIGXCPU */
#ifdef SIGXFSZ
#endif /* SIGXFSZ */
}
#ifdef SIGHUP
#endif /* SIGHUP */
#ifdef AP_SIG_GRACEFUL
#endif /* AP_SIG_GRACEFUL */
#ifdef AP_SIG_GRACEFUL_STOP
#endif /* AP_SIG_GRACEFUL_STOP */
#ifdef SIGPIPE
#endif /* SIGPIPE */
#endif
}
{
struct timeout_queue *q;
#ifdef AP_DEBUG
{
}
#else
#endif
/*
* If some module requested a shortened waiting period, only wait for
* 2s (SECONDS_TO_LINGER). This is useful for mitigating certain
* DoS attacks.
*/
q = &short_linger_q;
}
else {
q = &linger_q;
}
TO_QUEUE_APPEND(*q, cs);
"start_lingering_close: apr_pollset_add failure");
TO_QUEUE_REMOVE(*q, cs);
apr_pool_clear(cs->p);
return 0;
}
return 1;
}
/*
* Close our side of the connection, flushing data to the client first.
* Pre-condition: cs is not in any timeout queue and not in the pollset,
* timeout_mutex is not locked
* return: 0 if connection is fully closed,
* 1 if connection is lingering
* May only be called by worker thread.
*/
{
if (ap_start_lingering_close(cs->c)) {
apr_pool_clear(cs->p);
return 0;
}
return start_lingering_close_common(cs);
}
/*
* Close our side of the connection, NOT flushing data to the client.
* This should only be called if there has been an error or if we know
* that our send buffers are empty.
* Pre-condition: cs is not in any timeout queue and not in the pollset,
* timeout_mutex is not locked
* return: 0 if connection is fully closed,
* 1 if connection is lingering
* may be called by listener thread
*/
{
if (c->aborted
apr_pool_clear(cs->p);
return 0;
}
return start_lingering_close_common(cs);
}
/*
* forcibly close a lingering connection after the lingering period has
* expired
* Pre-condition: cs is not in any timeout queue and not in the pollset
* return: irrelevant (need same prototype as start_lingering_close)
*/
{
"socket reached timeout in lingering-close state");
if (rv != APR_SUCCESS) {
AP_DEBUG_ASSERT(0);
}
apr_pool_clear(cs->p);
return 0;
}
/*
* process one connection in the worker
*/
int my_thread_num)
{
conn_rec *c;
int rc;
/* XXX: This will cause unbounded mem usage for long lasting connections */
if (!c) {
apr_pool_clear(p);
return;
}
c->current_thread = thd;
cs->c = c;
cs->p = p;
"process_socket: connection aborted");
c->aborted = 1;
}
/**
* XXX If the platform does not have a usable way of bundling
* accept() with a socket readability check, like Win32,
* and there are measurable delays before the
* socket is readable due to the first data packet arriving,
* it might be better to create the cs on the listener thread
* with the state set to CONN_STATE_CHECK_REQUEST_LINE_READABLE
*
* FreeBSD users will want to enable the HTTP accept filter
* module in their kernel for the highest performance
* When the accept filter is active, sockets are kept in the
* kernel until a HTTP request is received.
*/
}
else {
c = cs->c;
c->current_thread = thd;
}
if (c->clogging_input_filters && !c->aborted) {
/* Since we have an input filter which 'clogs' the input stream,
* like mod_ssl used to, lets just do the normal read from input
* filters, like the Worker MPM does. Filters that need to write
* where they would otherwise read, or read where they would
* otherwise write, should set the sense appropriately.
*/
}
}
if (!c->aborted) {
/* state will be updated upon return
* fall thru to either wait for readability/timeout or
* do lingering close
*/
}
else {
}
}
}
if (rv != APR_SUCCESS) {
"network write failure in core output filter");
}
else if (c->data_in_output_filters) {
/* Still in WRITE_COMPLETION_STATE:
* Set a write timeout for this connection, and let the
* event thread poll for writeability.
*/
return;
}
}
else if (c->data_in_input_filters) {
goto read_request;
}
else {
}
}
if (!start_lingering_close_blocking(cs))
return;
}
/* It greatly simplifies the logic to use a single timeout value here
* because the new element can just be added to the end of the list and
* it will stay sorted in expiration time sequence. If brand new
* sockets are sent to the event thread for a readability check, this
* will be a slight behavior change - they use the non-keepalive
* timeout today. With a normal client, the socket will be readable in
* a few milliseconds anyway.
*/
apr_time_now();
/* Add work to pollset. */
if (rc != APR_SUCCESS) {
"process_socket: apr_pollset_add failure");
}
}
}
/*
* Prevent this connection from writing to our connection state after it
* is no longer associated with this thread. This would happen if the EOR
* bucket is destroyed from the listener thread due to a connection abort
* or timeout.
*/
return;
}
/* conns_this_child has gone to zero or below. See if the admin coded
"MaxConnectionsPerChild 0", and keep going in that case. Doing it this way
simplifies the hot path in worker_thread */
static void check_infinite_requests(void)
{
if (ap_max_requests_per_child) {
"Stopping process due to MaxConnectionsPerChild");
}
else {
/* keep going */
}
}
if (!*closed) {
int i;
*closed = 1;
dying = 1;
for (i = 0; i < threads_per_child; ++i) {
}
/* wake up the main thread */
}
}
static void unblock_signal(int sig)
{
#if defined(SIGPROCMASK_SETS_THREAD_MASK)
#else
#endif
}
static void dummy_signal_handler(int sig)
{
/* XXX If specifying SIG_IGN is guaranteed to unblock a syscall,
* then we don't need this goofy function.
*/
}
#if HAVE_SERF
void *serf_baton)
{
/* XXXXX: recycle listener_poll_types */
}
void *serf_baton)
{
}
#endif
{
#if HAVE_SERF
#endif
int i = 0;
pfd = &listener_pollfd[i];
}
#if HAVE_SERF
/* TODO: subpools, threads, reuse, etc. -- currently use malloc() inside :( */
s_socket_remove, p);
ap_register_provider(p, "mpm_serf",
#endif
return APR_SUCCESS;
}
{
}
/*
* Pre-condition: pfd->cs is neither in pollset nor timeout queue
* this function may only be called by the listener
*/
{
if (rc != APR_SUCCESS) {
/* trash the connection; we couldn't queue the connected
* socket to a worker
*/
apr_pool_clear(cs->p);
}
return rc;
}
/* get_worker:
* If *have_idle_worker_p == 0, reserve a worker thread, and set
* *have_idle_worker_p = 1.
* If *have_idle_worker_p is already 1, will do nothing.
* If blocking == 1, block if all workers are currently busy.
* If no worker was available immediately, will set *all_busy to 1.
* XXX: If there are no workers, we should not block immediately but
* XXX: close all keep-alive connections first.
*/
{
if (*have_idle_worker_p) {
/* already reserved a worker thread - must have hit a
* transient error on a previous pass
*/
return;
}
if (blocking)
else
if (rc == APR_SUCCESS) {
*have_idle_worker_p = 1;
}
*all_busy = 1;
}
else if (!APR_STATUS_IS_EOF(rc)) {
"ap_queue_info_wait_for_idler failed. "
"Attempting to shutdown process gracefully");
}
}
/* Structures to reuse */
static ap_skiplist *timer_skiplist;
static int indexing_comp(void *a, void *b)
{
}
static int indexing_compk(void *ac, void *b)
{
}
static apr_thread_mutex_t *g_timer_skiplist_mtx;
void *baton)
{
}
else {
}
/* XXXXX: optimize */
/* Okay, insert sorted by when.. */
return APR_SUCCESS;
}
/*
* Close socket and clean up if remote closed its end while we were in
* lingering close.
* Only to be called in the listener thread;
* Pre-condition: cs is in one of the linger queues and in the pollset
*/
{
char dummybuf[2048];
struct timeout_queue *q;
/* socket is already in non-blocking state */
do {
} while (rv == APR_SUCCESS);
if (!APR_STATUS_IS_EOF(rv)) {
return;
}
TO_QUEUE_REMOVE(*q, cs);
apr_pool_clear(cs->p);
}
/* call 'func' for all elements of 'q' with timeout less than 'timeout_time'.
* Pre-condition: timeout_mutex must already be locked
* Post-condition: timeout_mutex will be locked again
*/
static void process_timeout_queue(struct timeout_queue *q,
int (*func)(event_conn_state_t *))
{
int count = 0;
if (!q->count) {
return;
}
"apr_pollset_remove failed");
}
count++;
}
if (!count)
return;
while (count) {
count--;
}
}
{
int have_idle_worker = 0;
const apr_pollfd_t *out_pfd;
apr_int32_t num = 0;
int closed = 0, listeners_disabled = 0;
last_log = apr_time_now();
/* the following times out events that are really close in the future
* to prevent extra poll calls
*
* current value is .1 second
*/
#define TIMEOUT_FUDGE_FACTOR 100000
#define EVENT_FUDGE_FACTOR 10000
if (rc != APR_SUCCESS) {
"failed to initialize pollset, "
"attempting to shutdown process gracefully");
return NULL;
}
/* Unblock the signal used to wake this thread up, and set a handler for
* it.
*/
for (;;) {
int workers_were_busy = 0;
if (listener_may_exit) {
if (terminate_mode == ST_UNGRACEFUL
|| apr_atomic_read32(&connection_count) == 0)
break;
}
if (conns_this_child <= 0)
now = apr_time_now();
if (APLOGtrace6(ap_server_conf)) {
/* trace log status every second */
"connections: %u (clogged: %u write-completion: %d "
"keep-alive: %d lingering: %d suspended: %u)",
}
}
if (te) {
}
else {
timeout_interval = 1;
}
}
else {
}
#if HAVE_SERF
if (rc != APR_SUCCESS) {
/* TOOD: what should do here? ugh. */
}
#endif
if (rc != APR_SUCCESS) {
if (APR_STATUS_IS_EINTR(rc)) {
continue;
}
if (!APR_STATUS_IS_TIMEUP(rc)) {
"apr_pollset_poll failed. Attempting to "
"shutdown process gracefully");
}
}
if (listener_may_exit) {
if (terminate_mode == ST_UNGRACEFUL
|| apr_atomic_read32(&connection_count) == 0)
break;
}
now = apr_time_now();
while (ep) {
}
else {
break;
}
}
while (num) {
/* one of the sockets is readable */
int blocking = 1;
/* don't wait for a worker for a keepalive request */
blocking = 0;
/* FALL THROUGH */
/*
* Some of the pollset backends, like KQueue or Epoll
* automagically remove the FD if the socket is closed,
* therefore, we can accept _SUCCESS or _NOTFOUND,
* and we still want to keep going
*/
"pollset remove failed");
break;
}
/* If we didn't get a worker immediately for a keep-alive
* request, we close the connection, so that the client can
* re-connect to a different process.
*/
if (!have_idle_worker) {
break;
}
if (rc != APR_SUCCESS) {
ap_server_conf, "push2worker failed");
}
else {
have_idle_worker = 0;
}
break;
case CONN_STATE_LINGER_NORMAL:
case CONN_STATE_LINGER_SHORT:
break;
default:
"event_loop: unexpected state %d",
ap_assert(0);
}
}
/* A Listener Socket is ready for an accept() */
if (workers_were_busy) {
if (!listeners_disabled)
listeners_disabled = 1;
"All workers busy, not accepting new conns"
"in this process");
}
else if ( (int)apr_atomic_read32(&connection_count)
- (int)apr_atomic_read32(&lingering_count)
{
if (!listeners_disabled)
"Too many open connections (%u), "
"not accepting new conns in this process",
"Idle workers: %u",
listeners_disabled = 1;
}
else if (listeners_disabled) {
listeners_disabled = 0;
}
if (!listeners_disabled) {
/* create a new transaction pool for each accepted socket */
"Failed to create transaction pool");
return NULL;
}
}
/* later we trash rv and rely on csd to indicate
*/
if (rc == APR_EGENERAL) {
/* E[NM]FILE, ENOMEM, etc */
resource_shortage = 1;
}
if (rc != APR_SUCCESS) {
/* trash the connection; we couldn't queue the connected
* socket to a worker
*/
"ap_queue_push failed");
}
else {
have_idle_worker = 0;
}
}
else {
}
}
} /* if:else on pt->type */
#if HAVE_SERF
/* send socket to serf. */
/* XXXX: this doesn't require get_worker() */
}
#endif
out_pfd++;
num--;
} /* while for processing poll */
/* XXX possible optimization: stash the current time for use as
* r->request_time for new requests
*/
now = apr_time_now();
/* we only do this once per 0.1s (TIMEOUT_FUDGE_FACTOR) */
if (now > timeout_time) {
struct process_score *ps;
/* handle timed out sockets */
/* Step 1: keepalive timeouts */
/* If all workers are busy, we kill older keep-alive connections so that they
* may connect to another process.
*/
"All workers are busy, will close %d keep-alive "
"connections",
}
else {
}
/* Step 2: write completion timeouts */
/* Step 3: (normal) lingering close completion timeouts */
/* Step 4: (short) lingering close completion timeouts */
}
if (listeners_disabled && !workers_were_busy
&& (int)apr_atomic_read32(&connection_count)
- (int)apr_atomic_read32(&lingering_count)
{
listeners_disabled = 0;
}
/*
* XXX: do we need to set some timeout that re-enables the listensocks
* XXX: in case no other event occurs?
*/
} /* listener main loop */
return NULL;
}
/* XXX For ungraceful termination/restart, we definitely don't want to
* wait for active connections to finish but we may want to wait
* for idle workers to get out of the queue code and release mutexes,
* since those mutexes are cleaned up pretty soon and some systems
* may not react favorably (i.e., segfault) if operations are attempted
* on cleaned-up mutexes.
*/
{
int is_idle = 0;
while (!workers_may_exit) {
if (!is_idle) {
if (rv != APR_SUCCESS) {
"ap_queue_info_set_idle failed. Attempting to "
"shutdown process gracefully.");
break;
}
is_idle = 1;
}
if (workers_may_exit) {
break;
}
if (rv != APR_SUCCESS) {
/* We get APR_EOF during a graceful shutdown once all the
* connections accepted by this server process have been handled.
*/
if (APR_STATUS_IS_EOF(rv)) {
break;
}
/* We get APR_EINTR whenever ap_queue_pop() has been interrupted
* from an explicit call to ap_queue_interrupt_all(). This allows
* us to unblock threads stuck in ap_queue_pop() when a shutdown
* is pending.
*
* If workers_may_exit is set and this is ungraceful termination/
* restart, we are bound to get an error on some systems (e.g.,
* AIX, which sanity-checks mutex operations) since the queue
* may have already been cleaned up. Don't log the "error" if
* workers_may_exit is set.
*/
else if (APR_STATUS_IS_EINTR(rv)) {
goto worker_pop;
}
/* We got some other error. */
else if (!workers_may_exit) {
"ap_queue_pop failed");
}
continue;
}
{
}
}
else {
is_idle = 0;
}
}
dying ? SERVER_DEAD :
(request_rec *) NULL);
return NULL;
}
static int check_signal(int signum)
{
switch (signum) {
case SIGTERM:
case SIGINT:
return 1;
}
return 0;
}
{
if (rv != APR_SUCCESS) {
"apr_thread_create: unable to create listener thread");
/* let the parent decide how bad this really is */
}
}
/* XXX under some circumstances not understood, children can get stuck
* in start_threads forever trying to take over slots which will
* never be cleaned up; for now there is an APLOG_DEBUG message issued
* every so often when this condition occurs
*/
{
int my_child_num = child_num_arg;
int i;
int threads_created = 0;
int listener_started = 0;
int loops;
int prev_threads_created;
int max_recycled_pools = -1;
/* We must create the fd queues before we start up the listener
* and worker threads. */
if (rv != APR_SUCCESS) {
"ap_queue_init() failed");
}
/* If we want to conserve memory, let's not keep an unlimited number of
* pools & allocators.
* XXX: This should probably be a separate config directive
*/
}
if (rv != APR_SUCCESS) {
"ap_queue_info_create() failed");
}
/* Create the timeout mutex and main pollset before the listener
* thread starts.
*/
pchild);
if (rv != APR_SUCCESS) {
"creation of the timeout mutex failed.");
}
/* Create the main pollset */
for (i = 0; i < sizeof(good_methods) / sizeof(void*); i++) {
* connections in K-A or lingering
* close?
*/
good_methods[i]);
if (rv == APR_SUCCESS) {
break;
}
}
if (rv != APR_SUCCESS) {
* connections in K-A or lingering
* close?
*/
}
if (rv != APR_SUCCESS) {
"apr_pollset_create with Thread Safety failed.");
}
* sizeof(apr_socket_t *));
loops = prev_threads_created = 0;
while (1) {
/* threads_per_child does not include the listener thread */
for (i = 0; i < threads_per_child; i++) {
int status =
continue;
}
/* We are creating threads right now */
/* We let each thread update its own scoreboard entry. This is
* done because it lets us deal with tid better.
*/
if (rv != APR_SUCCESS) {
"apr_thread_create: unable to create worker thread");
/* let the parent decide how bad this really is */
}
}
/* Start the listener only when there are workers available */
if (!listener_started && threads_created) {
listener_started = 1;
}
break;
}
/* wait for previous generation to clean up an entry */
++loops;
if (prev_threads_created == threads_created) {
"slots very quickly (%d of %d)",
}
}
}
/* What state should this child_main process be listed as in the
* scoreboard...?
* ap_update_child_status_from_indexes(my_child_num, i, SERVER_STARTING,
* (request_rec *) NULL);
*
* This state should be listed separately in the scoreboard, in some kind
* of process_status, not mixed in with the worker threads' status.
* "life_status" is almost right, but it's in the worker's structure, and
* the name could be clearer. gla
*/
return NULL;
}
{
int i;
if (listener) {
int iter;
/* deal with a rare timing window which affects waking up the
* listener thread... if the signal sent to the listener thread
* is delivered between the time it verifies that the
* listener_may_exit flag is clear and the time it enters a
* blocking syscall, the signal didn't do any good... work around
* that by sleeping briefly and sending it again
*/
iter = 0;
/* listener has not stopped accepting yet */
++iter;
}
if (iter >= 10) {
"the listener thread didn't stop accepting");
}
else {
if (rv != APR_SUCCESS) {
"apr_thread_join: unable to join listener thread");
}
}
}
for (i = 0; i < threads_per_child; i++) {
if (threads[i]) { /* if we ever created this thread */
if (rv != APR_SUCCESS) {
"apr_thread_join: unable to join worker "
"thread %d", i);
}
}
}
}
{
* trying to take over slots from a
* previous generation
*/
if (rv != APR_SUCCESS) {
"apr_thread_join: unable to join the start " "thread");
}
}
static void child_main(int child_num_arg)
{
* child initializes
*/
/*stuff to do before we switch id's, so we have permissions. */
}
/* done with init critical section */
/* Just use the standard apr_setup_signal_thread to block all signals
* from being received. The child processes no longer use signals for
* any communication with the parent process.
*/
if (rv != APR_SUCCESS) {
"Couldn't initialize signal thread");
}
if (ap_max_requests_per_child) {
}
else {
/* coding a value of zero means infinity */
}
/* Setup worker threads */
/* clear the storage; we may not create all our threads immediately,
* and we want a 0 entry to indicate a thread which was not created
*/
/* 0 means PTHREAD_CREATE_JOINABLE */
if (ap_thread_stacksize != 0) {
"inappropriate, using default",
}
}
if (rv != APR_SUCCESS) {
"apr_thread_create: unable to create worker thread");
/* let the parent decide how bad this really is */
}
/* If we are only running in one_process mode, we will want to
* still handle signals. */
if (one_process) {
/* Block until we get a terminating signal. */
/* make sure the start thread has finished; signal_threads()
* and join_workers() depend on that
*/
/* XXX join_start_thread() won't be awakened if one of our
* threads encounters a critical error and attempts to
* shutdown this child
*/
/* helps us terminate a little more quickly than the dispatch of the
* signal thread; beats the Pipe of Death and the browsers
*/
/* A terminating signal was received. Now join each of the
* workers to clean them up.
* If the worker already exited, then the join frees
* their resources and returns.
* If the worker hasn't exited, then this blocks until
* they have (then cleans up).
*/
}
else { /* !one_process */
/* remove SIGTERM from the set of blocked signals... if one of
* the other threads in the process needs to take us down
* (e.g., for MaxConnectionsPerChild) it will send us SIGTERM
*/
/* Watch for any messages from the parent over the POD */
while (1) {
if (rv == AP_MPM_PODX_NORESTART) {
/* see if termination was triggered while we slept */
switch (terminate_mode) {
case ST_GRACEFUL:
break;
case ST_UNGRACEFUL:
break;
}
}
/* make sure the start thread has finished;
* signal_threads() and join_workers depend on that
*/
signal_threads(rv ==
break;
}
}
/* A terminating signal was received. Now join each of the
* workers to clean them up.
* If the worker already exited, then the join frees
* their resources and returns.
* If the worker hasn't exited, then this blocks until
* they have (then cleans up).
*/
}
}
{
int pid;
}
if (one_process) {
set_signals();
/* NOTREACHED */
}
"fork: Unable to fork new process");
/* fork didn't succeed. There's no need to touch the scoreboard;
* if we were trying to replace a failed child process, then
* server_main_loop() marked its workers SERVER_DEAD, and if
* we were trying to replace a child process that exited normally,
* its worker_thread()s left SERVER_DEAD or SERVER_GRACEFUL behind.
*/
/* In case system resources are maxxed out, we don't want
Apache running away with the CPU trying to fork over and
over and over again. */
return -1;
}
if (!pid) {
#ifdef HAVE_BINDPROCESSOR
/* By default, AIX binds to a single processor. This bit unbinds
* children which will then bind to another CPU.
*/
"processor unbind failed");
#endif
/* NOTREACHED */
}
/* else */
/* This new child process is squatting on the scoreboard
* entry owned by an exiting child process, which cannot
* exit until all active requests complete.
*/
}
return 0;
}
/* start up a bunch of children */
static void startup_children(int number_to_start)
{
int i;
for (i = 0; number_to_start && i < ap_daemons_limit; ++i) {
continue;
}
if (make_child(ap_server_conf, i) < 0) {
break;
}
}
}
static void perform_idle_server_maintenance(void)
{
int i, j;
int idle_thread_count;
int free_length;
int totally_free_length = 0;
int free_slots[MAX_SPAWN_RATE];
int last_non_dead;
int total_non_dead;
int active_thread_count = 0;
/* initialize the free_list */
free_length = 0;
idle_thread_count = 0;
last_non_dead = -1;
total_non_dead = 0;
for (i = 0; i < ap_daemons_limit; ++i) {
/* Initialization to satisfy the compiler. It doesn't know
* that threads_per_child is always > 0 */
int status = SERVER_DEAD;
int any_dying_threads = 0;
int any_dead_threads = 0;
int all_dead_threads = 1;
int child_threads_active = 0;
if (i >= retained->max_daemons_limit
/* short cut if all active processes have been examined and
* enough empty scoreboard slots have been found
*/
break;
for (j = 0; j < threads_per_child; j++) {
/* XXX any_dying_threads is probably no longer needed GLA */
(status == SERVER_GRACEFUL);
/* We consider a starting server as idle because we started it
* at least a cycle ago, and if it still hasn't finished starting
* then we're just going to swamp things worse by forking more.
* So we hopefully won't need to fork more if we count it.
* This depends on the ordering of SERVER_READY and SERVER_STARTING.
*/
for loop if no pid? not much else matters */
{
}
}
}
}
if (any_dead_threads
if (all_dead_threads) {
/* great! we prefer these, because the new process can
* start more threads sooner. So prioritize this slot
* by putting it ahead of any slots with active threads.
*
* first, make room by moving a slot that's potentially still
* in use to the end of the array
*/
free_slots[totally_free_length++] = i;
}
else {
/* slot is still in use - back of the bus
*/
free_slots[free_length] = i;
}
++free_length;
}
else if (child_threads_active == threads_per_child) {
had_healthy_child = 1;
}
/* XXX if (!ps->quiescing) is probably more reliable GLA */
if (!any_dying_threads) {
last_non_dead = i;
}
}
if (retained->sick_child_detected) {
if (had_healthy_child) {
/* Assume this is a transient error, even though it may not be. Leave
* the server up in case it is able to serve some requests or the
* problem will be resolved.
*/
retained->sick_child_detected = 0;
}
else {
/* looks like a basket case, as no child ever fully initialized; give up.
*/
shutdown_pending = 1;
child_fatal = 1;
"A resource shortage or other unrecoverable failure "
"was encountered before any child process initialized "
"successfully... httpd is exiting!");
/* the child already logged the failure details */
return;
}
}
if (idle_thread_count > max_spare_threads) {
/* Kill off one child */
}
else if (idle_thread_count < min_spare_threads) {
/* terminate the free list */
if (free_length == 0) { /* scoreboard is full, can't fork */
if (!retained->maxclients_reported) {
/* only report this condition once */
"server reached MaxRequestWorkers setting, "
"consider raising the MaxRequestWorkers "
"setting");
}
}
else {
"scoreboard is full, not at MaxRequestWorkers");
}
}
else {
}
"server seems busy, (you may need "
"to increase StartServers, ThreadsPerChild "
"or Min/MaxSpareThreads), "
"spawning %d children, there are around %d idle "
"threads, and %d total children", free_length,
}
for (i = 0; i < free_length; ++i) {
}
/* the next time around we want to spawn twice as many if this
* wasn't good enough, but not if we've just done a graceful
*/
}
}
}
}
else {
}
}
static void server_main_loop(int remaining_children_to_start)
{
int child_slot;
int status, processed_status;
int i;
while (!restart_pending && !shutdown_pending) {
if (processed_status == APEXIT_CHILDFATAL) {
/* fix race condition found in PR 39311
* A child created at the same time as a graceful happens
* can find the lock missing and create a fatal error.
* It is not fatal for the last generation to be in this state.
*/
if (child_slot < 0
== retained->my_generation) {
shutdown_pending = 1;
child_fatal = 1;
return;
}
else {
"Ignoring fatal error in child of previous "
"generation (pid %ld).",
}
}
else if (processed_status == APEXIT_CHILDSICK) {
/* tell perform_idle_server_maintenance to check into this
* on the next timer pop
*/
}
/* non-fatal death... note that it's gone in the scoreboard. */
if (child_slot >= 0) {
for (i = 0; i < threads_per_child; i++)
(request_rec *) NULL);
event_note_child_killed(child_slot, 0, 0);
if (processed_status == APEXIT_CHILDSICK) {
/* resource shortage, minimize the fork rate */
}
else if (remaining_children_to_start
&& child_slot < ap_daemons_limit) {
/* we're still doing a 1-for-1 replacement of dead
* children with new children
*/
}
}
if (processed_status == APEXIT_CHILDSICK
/* resource shortage, minimize the fork rate */
}
}
status) == 0) {
/* handled */
#endif
}
else if (retained->is_graceful) {
/* Great, we've probably just lost a slot in the
* scoreboard. Somehow we don't know about this child.
*/
"long lost child came home! (pid %ld)",
}
/* Don't perform idle maintenance when a child dies,
* only do it when there's a timeout. Remember only a
* finite number of children can die, and it's pretty
* pathological for a lot to die suddenly.
*/
continue;
}
else if (remaining_children_to_start) {
/* we hit a 1 second timeout in which none of the previous
* generation of children needed to be reaped... so assume
* they're all done, and pick up the slack if any is left.
*/
/* In any event we really shouldn't do the code below because
* few of the servers we just started are in the IDLE state
* yet, so we'd mistakenly create an extra server.
*/
continue;
}
}
}
{
if (!retained->is_graceful) {
return DONE;
}
/* fix the generation number in the global score; we just got a new,
* cleared scoreboard
*/
}
restart_pending = shutdown_pending = 0;
set_signals();
/* Don't thrash... */
/* If we're doing a graceful_restart then we're going to see a lot
* of children exiting immediately when we get into the main loop
* below (because we just sent them AP_SIG_GRACEFUL). This happens pretty
* rapidly... and for each one that exits we may start a new one, until
* there are at least min_spare_threads idle threads, counting across
* all children. But we may be permitted to start more children than
* that, so we'll just keep track of how many we're
* supposed to start up without the 1 second penalty between each fork.
*/
}
if (!retained->is_graceful) {
}
else {
/* give the system some time to recover before kicking into
* exponential mode */
}
"%s configured -- resuming normal operations",
"Server built: %s", ap_get_server_built());
ap_log_command_line(plog, s);
/* Time to shut down:
* Kill child processes, tell them to call child_exit, etc...
*/
if (!child_fatal) {
/* cleanup pid file on normal shutdown */
}
return DONE;
} else if (shutdown_pending) {
/* Time to gracefully shut down:
* Kill child processes, tell them to call child_exit, etc...
*/
int active_children;
int index;
apr_time_t cutoff = 0;
/* Close our listeners, and then ask our children to do same */
if (!child_fatal) {
/* cleanup pid file on normal shutdown */
"caught " AP_SIG_GRACEFUL_STOP_STRING
", shutting down gracefully");
}
if (ap_graceful_shutdown_timeout) {
cutoff = apr_time_now() +
}
/* Don't really exit until each child has finished */
shutdown_pending = 0;
do {
/* Pause for a second */
/* Relieve any children which have now exited */
active_children = 0;
active_children = 1;
/* Having just one child is enough to stay around */
break;
}
}
} while (!shutdown_pending && active_children &&
/* We might be here because we received SIGTERM, either
* way, try and make sure that all of our processes are
* really dead.
*/
return DONE;
}
/* we've been told to restart */
if (one_process) {
/* not worth thinking about */
return DONE;
}
/* advance to the next generation */
/* XXX: we really need to make sure this new generation number isn't in
* use by any of the children.
*/
if (retained->is_graceful) {
" received. Doing graceful restart");
/* wake up the children...time to die. But we'll have more soon */
/* This is mostly for debugging... so that we know what is still
* gracefully dealing with existing request.
*/
}
else {
/* Kill 'em all. Since the child acts the same on the parents SIGTERM
* and a SIGHUP, we may as well use the same signal, because some user
* pthreads are stealing signals from us left and right.
*/
"SIGHUP received. Attempting to restart");
}
return OK;
}
/* This really should be a post_config hook, but the error log is already
* redirected by that point, so we need to do this in the open_logs phase.
*/
{
int startup = 0;
int level_flags = 0;
pconf = p;
/* the reverse of pre_config, we want this only the first time around */
startup = 1;
}
"no listening sockets available, shutting down");
return DONE;
}
if (!one_process) {
"could not open pipe-of-death");
return DONE;
}
}
/* for skiplist */
srand((unsigned int)apr_time_now());
return OK;
}
apr_pool_t * ptemp)
{
const char *userdata_key = "mpm_event_module";
if (debug) {
no_detach = 0;
}
else {
}
/* sigh, want this only the second time around */
if (!retained) {
}
++retained->module_loads;
int i;
static apr_uint32_t foo = 0;
i = apr_atomic_dec32(&foo);
if (i >= 0) {
"atomics not working as expected");
return HTTP_INTERNAL_SERVER_ERROR;
}
if (rv != APR_SUCCESS) {
"Couldn't create a Thread Safe Pollset. "
"Is it supported on your platform?"
"Also check system or user limits!");
return HTTP_INTERNAL_SERVER_ERROR;
}
if (!one_process && !foreground) {
/* before we detach, setup crash handlers to log to errorlog */
if (rv != APR_SUCCESS) {
"apr_proc_detach failed");
return HTTP_INTERNAL_SERVER_ERROR;
}
}
}
had_healthy_child = 0;
ap_extended_status = 0;
return OK;
}
{
int startup = 0;
/* the reverse of pre_config, we want this only the first time around */
startup = 1;
}
if (server_limit > MAX_SERVER_LIMIT) {
if (startup) {
"WARNING: ServerLimit of %d exceeds compile-time "
"limit of", server_limit);
" %d servers, decreasing to %d.",
} else {
"ServerLimit of %d exceeds compile-time limit "
"of %d, decreasing to match",
}
}
else if (server_limit < 1) {
if (startup) {
"WARNING: ServerLimit of %d not allowed, "
"increasing to 1.", server_limit);
} else {
"ServerLimit of %d not allowed, increasing to 1",
}
server_limit = 1;
}
/* you cannot change ServerLimit across a restart; ignore
* any such attempts
*/
if (!retained->first_server_limit) {
}
/* don't need a startup console version here */
"changing ServerLimit to %d from original value of %d "
"not allowed during restart",
}
if (thread_limit > MAX_THREAD_LIMIT) {
if (startup) {
"WARNING: ThreadLimit of %d exceeds compile-time "
"limit of", thread_limit);
" %d threads, decreasing to %d.",
} else {
"ThreadLimit of %d exceeds compile-time limit "
"of %d, decreasing to match",
}
}
else if (thread_limit < 1) {
if (startup) {
"WARNING: ThreadLimit of %d not allowed, "
"increasing to 1.", thread_limit);
} else {
"ThreadLimit of %d not allowed, increasing to 1",
}
thread_limit = 1;
}
/* you cannot change ThreadLimit across a restart; ignore
* any such attempts
*/
if (!retained->first_thread_limit) {
}
/* don't need a startup console version here */
"changing ThreadLimit to %d from original value of %d "
"not allowed during restart",
}
if (threads_per_child > thread_limit) {
if (startup) {
"WARNING: ThreadsPerChild of %d exceeds ThreadLimit "
"of", threads_per_child);
" %d threads, decreasing to %d.",
" To increase, please see the ThreadLimit "
"directive.");
} else {
"ThreadsPerChild of %d exceeds ThreadLimit "
"of %d, decreasing to match",
}
}
else if (threads_per_child < 1) {
if (startup) {
"WARNING: ThreadsPerChild of %d not allowed, "
"increasing to 1.", threads_per_child);
} else {
"ThreadsPerChild of %d not allowed, increasing to 1",
}
threads_per_child = 1;
}
if (max_workers < threads_per_child) {
if (startup) {
"WARNING: MaxRequestWorkers of %d is less than "
"ThreadsPerChild of", max_workers);
" %d, increasing to %d. MaxRequestWorkers must be at "
"least as large",
" as the number of threads in a single server.");
} else {
"MaxRequestWorkers of %d is less than ThreadsPerChild "
"of %d, increasing to match",
}
}
if (max_workers % threads_per_child) {
if (startup) {
"WARNING: MaxRequestWorkers of %d is not an integer "
"multiple of", max_workers);
" ThreadsPerChild of %d, decreasing to nearest "
"multiple %d,", threads_per_child,
" for a maximum of %d servers.",
} else {
"MaxRequestWorkers of %d is not an integer multiple "
"of ThreadsPerChild of %d, decreasing to nearest "
}
}
if (ap_daemons_limit > server_limit) {
if (startup) {
"WARNING: MaxRequestWorkers of %d would require %d "
" would exceed ServerLimit of %d, decreasing to %d.",
" To increase, please see the ServerLimit "
"directive.");
} else {
"MaxRequestWorkers of %d would require %d servers and "
"exceed ServerLimit of %d, decreasing to %d",
}
}
/* ap_daemons_to_start > ap_daemons_limit checked in ap_mpm_run() */
if (ap_daemons_to_start < 0) {
if (startup) {
"WARNING: StartServers of %d not allowed, "
"increasing to 1.", ap_daemons_to_start);
} else {
"StartServers of %d not allowed, increasing to 1",
}
ap_daemons_to_start = 1;
}
if (min_spare_threads < 1) {
if (startup) {
"WARNING: MinSpareThreads of %d not allowed, "
"increasing to 1", min_spare_threads);
" to avoid almost certain server failure.");
" Please read the documentation.");
} else {
"MinSpareThreads of %d not allowed, increasing to 1",
}
min_spare_threads = 1;
}
/* max_spare_threads < min_spare_threads + threads_per_child
* checked in ap_mpm_run()
*/
return OK;
}
static void event_hooks(apr_pool_t * p)
{
/* Our open_logs hook function must run before the core's, or stderr
* will be redirected to a file, and the messages won't print to the
* console.
*/
one_process = 0;
/* we need to set the MPM state before other pre-config hooks use MPM query
* to retrieve it, so register as REALLY_FIRST
*/
}
const char *arg)
{
return err;
}
return NULL;
}
const char *arg)
{
return err;
}
return NULL;
}
const char *arg)
{
return err;
}
return NULL;
}
const char *arg)
{
return err;
}
"MaxClients is deprecated, use MaxRequestWorkers "
"instead.");
}
return NULL;
}
const char *arg)
{
return err;
}
return NULL;
}
{
return err;
}
return NULL;
}
const char *arg)
{
return err;
}
return NULL;
}
const char *arg)
{
double val;
char *endptr;
return err;
}
if (*endptr)
return "error parsing value";
if (val <= 0)
return "AsyncRequestWorkerFactor argument must be a positive number";
if (worker_factor == 0)
worker_factor = 1;
return NULL;
}
static const command_rec event_cmds[] = {
"Number of child processes launched at server startup"),
"Maximum number of child processes for this run of Apache"),
"Minimum number of idle threads, to handle request spikes"),
"Maximum number of idle threads"),
"Deprecated name of MaxRequestWorkers"),
"Maximum number of threads alive at the same time"),
"Number of threads each child creates"),
"Maximum number of worker threads per child process for this "
"run of Apache - Upper limit for ThreadsPerChild"),
"How many additional connects will be accepted per idle "
"worker thread"),
{NULL}
};
NULL, /* hook to run before apache parses args */
NULL, /* create per-directory config structure */
NULL, /* merge per-directory config structures */
NULL, /* create per-server config structure */
NULL, /* merge per-server config structures */
event_cmds, /* command apr_table_t */
event_hooks /* register_hooks */
};