name-based.xml revision 79e2fc13eb291fcf2c095fe570921f3f8462a565
<?xml version='1.0' encoding='UTF-8' ?>
<manualpage>
<relativepath href=".."/>
<title>Name-based Virtual Host Support</title>
<summary>
<p>This document describes when and how to use name-based virtual hosts.</p>
</summary>
<section id="namevip"><title>Name-based vs. IP-based Virtual Hosts</title>
<p>IP-based virtual hosts use the IP address of the connection to
determine the correct virtual host to serve. Therefore you need to
have a separate IP address for each host. With name-based virtual
hosting, the server relies on the client to report the hostname as
part of the HTTP headers. Using this technique, many different hosts
can share the same IP address.</p>
<p>Name-based virtual hosting is usually simpler, since you need
only configure your DNS server to map each hostname to the correct
IP address and then configure the Apache HTTP Server to recognize
the different hostnames. Name-based virtual hosting also eases
the demand for scarce IP addresses. Therefore you should use
name-based virtual hosting unless there is a specific reason to
choose IP-based virtual hosting. Some reasons why you might consider
using IP-based virtual hosting:</p>
<ul>
<li>Some ancient clients are not compatible with name-based virtual
hosting. For name-based virtual hosting to work, the client must send
need to support obsolete clients and still use name-based virtual
hosting, a possible technique is discussed at the end of this
document.</li>
<li>Name-based virtual hosting cannot be used with SSL secure servers
because of the nature of the SSL protocol.</li>
<li>Some operating systems and network equipment implement bandwidth
management techniques that cannot differentiate between hosts unless
they are on separate IP addresses.</li>
</ul>
</section>
<section id="using"><title>Using Name-based Virtual Hosts</title>
<related>
<modulelist>
<module>core</module>
</modulelist>
<directivelist>
<directive module="core">DocumentRoot</directive>
<directive module="core">NameVirtualHost</directive>
<directive module="core">ServerAlias</directive>
<directive module="core">ServerName</directive>
<directive module="core">ServerPath</directive>
<directive module="core">VirtualHost</directive>
</directivelist>
</related>
<p>To use name-based virtual hosting, you must designate the IP
address (and possibly port) on the server that will be accepting
requests for the hosts. This is configured using the <directive
module="core">NameVirtualHost</directive> directive.
In the normal case where any and all IP addresses on the server should
be used, you can use <code>*</code> as the argument to
<code>NameVirtualHost</code>. Note that mentioning an IP address in a
<code>NameVirtualHost</code> directive does not automatically make the
server listen to that IP address. See <a href="/bind.html">Setting
which addresses and ports Apache uses</a> for more details. In addition,
any IP address specified here must be associated with a network interface
on the server.</p>
<p>The next step is to create a <directive type="section"
module="core">VirtualHost</directive> block for
each different host that you would like to serve. The argument to the
<code><VirtualHost></code> directive should be the same as the
argument to the <code>NameVirtualHost</code> directive (ie, an IP
address, or <code>*</code> for all addresses). Inside each
<code><VirtualHost></code> block, you will need at minimum a /
<directive module="core">ServerName</directive> directive to
designate which host is served and a <directive
module="core">DocumentRoot</directive> directive to
show where in the filesystem the content for that host lives.</p>
<p>If you are adding virtual hosts to an existing web server, you
must also create a <VirtualHost> block for the existing host.
The <code>ServerName</code> and <code>DocumentRoot</code> included in
this virtual host should be the same as the global
<code>ServerName</code> and <code>DocumentRoot</code>. List this
virtual host first in the configuration file so that it will act as
the default host.</p>
<p>For example, suppose that you are serving the domain
<example>
NameVirtualHost *<br />
<br />
<VirtualHost *><br />
ServerName www.domain.tld<br />
</VirtualHost><br />
<br />
<VirtualHost *><br />
ServerName www.otherdomain.tld<br />
</VirtualHost><br />
</example>
<p>You can alternatively specify an explicit IP address in place of
the * in both the <code>NameVirtualHost</code> and
<code><VirtualHost></code> directives.</p>
<p>Many servers want to be accessible by more than one name. This is
possible with the <directive module="core">ServerAlias</directive>
directive, placed inside the <VirtualHost> section. For
example if you add this to the first <VirtualHost> block
above</p>
<example>
ServerAlias domain.tld *.domain.tld
</example>
wildcard characters * and ? can be used to match names. Of course,
you can't just make up names and place them in <code>ServerName</code>
or <code>ServerAlias</code>. You must first have your DNS server
properly configured to map those names to an IP address associated
with your server.</p>
<p>Finally, you can fine-tune the configuration of the virtual hosts
by placing other directives inside the
<code><VirtualHost></code> containers. Most directives can be
placed in these containers and will then change the configuration only
of the relevant virtual host. To find out if a particular directive
is allowed, check the <a
href="/mod/directive-dict.html#Context">Context</a> of the
directive. Configuration directives set in the <em>main server
context</em> (outside any <code><VirtualHost></code> container)
will be used only if they are not overriden by the virtual host
settings.</p>
<p>Now when a request arrives, the server will first check if it is
using an IP address that matches the <code>NameVirtualHost</code>. If
it is, then it will look at each <code><VirtualHost></code>
section with a matching IP address and try to find one where the
<code>ServerName</code> or <code>ServerAlias</code> matches the
requested hostname. If it finds one, then it uses the configuration
for that server. If no matching virtual host is found, then
<strong>the first listed virtual host</strong> that matches the IP
address will be used.</p>
<p>As a consequence, the first listed virtual host is the
<em>default</em> virtual host. The <code>DocumentRoot</code> from the
<em>main server</em> will <strong>never</strong> be used when an IP
address matches the <code>NameVirtualHost</code> directive. If you
would like to have a special configuration for requests that do not
match any particular virtual host, simply put that configuration in a
<code><VirtualHost></code> container and list it first in the
configuration file.</p>
</section>
<section id="compat"><title>Compatibility with Older Browsers</title>
<p>As mentioned earlier, there are some clients
who do not send the required data for the name-based virtual
hosts to work properly. These clients will always be sent the
pages from the first virtual host listed for that IP address
(the <cite>primary</cite> name-based virtual host).</p>
<p>There is a possible workaround with the <directive
module="core">ServerPath</directive>
directive, albeit a slightly cumbersome one:</p>
<p>Example configuration:</p>
<example>
NameVirtualHost 111.22.33.44<br />
<br />
<VirtualHost 111.22.33.44><br />
ServerName www.domain.tld<br />
ServerPath /domain<br />
</VirtualHost><br />
</example>
<p>What does this mean? It means that a request for any URI
beginning with "<code>/domain</code>" will be served from the
pages can be accessed as
although clients sending a <code>Host:</code> header can also
<p>In order to make this work, put a link on your primary
virtual host's page to
host's pages, be sure to use either purely relative links
<p>This requires a bit of discipline, but adherence to these
guidelines will, for the most part, ensure that your pages will
work with all browsers, new and old.</p>
</section>
</manualpage>