snmp_trap_customconf.xml revision d81978a0815d5b8a75633c35e3e1f8708d36f017
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!--
! CDDL HEADER START
!
! The contents of this file are subject to the terms of the
! Common Development and Distribution License, Version 1.0 only
! (the "License"). You may not use this file except in compliance
! with the License.
!
! You can obtain a copy of the license at
! See the License for the specific language governing permissions
! and limitations under the License.
!
! When distributing Covered Code, include this CDDL HEADER in each
! file and include the License file at
! trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,
! add the following below this CDDL HEADER, with the fields enclosed
! by brackets "[]" replaced with your own identifying information:
! Portions Copyright [yyyy] [name of copyright owner]
!
! CDDL HEADER END
!
! Copyright 2008 Sun Microsystems, Inc.
! -->
<stax>
<defaultcall function="snmp_trap_customconf"/>
<function name="snmp_trap_customconf">
<sequence>
<block name="'snmp_trap_customconf'">
<sequence>
<!--- Test Suite information
#@TestSuiteName SNMP trap with custom configuration
#@TestSuitePurpose Check SNMP trap with custom configuration.
#@TestSuiteGroup SNMP trap with custom configuration
#@TestScript snmp_trap_customconf.xml
-->
<script>
if not CurrentTestPath.has_key('group'):
CurrentTestPath['group'] = 'snmp'
CurrentTestPath['suite'] = STAXCurrentBlock
</script>
<call function="'testSuite_Preamble'"/>
<!--- Define default values -->
<script>
defTrapsCommunityProp = '%s' % SNMP_PROPERTIES['traps-community']
newTrapsCommunityProp = 'myCommunity'
newTrapsDestProp = DIRECTORY_INSTANCE_HOST
wrongTrapsDestProp = 'wrongtrapdestination'
timerDuration2 = '5m'
</script>
<!--- Test Case information
#@TestMarker SNMP trap with custom configuration
#@TestName trap_customconf: TODO
#@TestIssue 3435
#@TestPurpose TODO.
#@TestPreamble none
#@TestStep TODO.
#@TestPostamble none
#@TestResult TODO.
-->
<testcase name="getTestCaseName
('trap_customconf: change the community property')">
<sequence>
<message>
'trap_customconf: change the community property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--set traps-community:%s' \
% newTrapsCommunityProp
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<timer duration="timerDuration2">
<sequence>
<parallel>
<sequence>
<message>
'trap_customconf: run the trap listener'
</message>
<call function="'SNMPTrapListener'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'snmpHost' : DIRECTORY_INSTANCE_HOST ,
'snmpTrapPort' : SNMP_TRAP_PORT ,
'snmpTrapCommunity' : defTrapsCommunityProp ,
'snmpTrapNumber' : '0,2,0,0,0,0' ,
'outputFile' : outputFile2
}
</call>
</sequence>
<sequence>
<message>
'trap_customconf: wait event from the trap listener'
</message>
<call function="'WaitEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_customconf: delete event from the trap listener'
</message>
<call function="'DeleteEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_defaultconf: restart the server'
</message>
<call function="'StopDsWithScript'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'dsRestart' : 'True'
}
</call>
<message>
'trap_customconf: send event to the trap listener'
</message>
<call function="'SendEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
}
</call>
</sequence>
</parallel>
</sequence>
</timer>
<script>timerRC2 = RC</script>
<call function="'checkTimerResult'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'outputFile' : outputFile2 ,
'timerDuration' : timerDuration2 ,
'timerRC' : timerRC2
}
</call>
<timer duration="timerDuration2">
<sequence>
<parallel>
<sequence>
<message>
'trap_customconf: run the trap listener'
</message>
<call function="'SNMPTrapListener'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'snmpHost' : DIRECTORY_INSTANCE_HOST ,
'snmpTrapPort' : SNMP_TRAP_PORT ,
'snmpTrapCommunity' : newTrapsCommunityProp ,
'snmpTrapNumber' : '2,0,0,0,0,0' ,
'outputFile' : outputFile2
}
</call>
</sequence>
<sequence>
<message>
'trap_customconf: wait event from the trap listener'
</message>
<call function="'WaitEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_customconf: delete event from the trap listener'
</message>
<call function="'DeleteEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_defaultconf: restart the server'
</message>
<call function="'StopDsWithScript'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'dsRestart' : 'True'
}
</call>
<message>
'trap_customconf: send event to the trap listener'
</message>
<call function="'SendEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
}
</call>
</sequence>
</parallel>
</sequence>
</timer>
<script>timerRC2 = RC</script>
<call function="'checkTimerResult'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'outputFile' : outputFile2 ,
'timerDuration' : timerDuration2 ,
'timerRC' : timerRC2
}
</call>
<message>
'trap_customconf: restore the traps-community property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--set traps-community:%s' \
% defTrapsCommunityProp
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<if expr="is_windows_platform(DIRECTORY_INSTANCE_HOST)">
<script>
knownIssue(3435)
</script>
</if>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker SNMP trap with custom configuration
#@TestName trap_customconf: TODO
#@TestIssue 3435
#@TestPurpose TODO.
#@TestPreamble none
#@TestStep TODO.
#@TestPostamble none
#@TestResult TODO.
-->
<testcase name="getTestCaseName
('trap_customconf: set traps-destination property to correct value')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'trap_customconf: change the traps-destination property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--set traps-destination:%s' \
% newTrapsDestProp
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<timer duration="timerDuration2">
<sequence>
<parallel>
<sequence>
<message>
'trap_customconf: run the trap listener'
</message>
<call function="'SNMPTrapListener'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'snmpHost' : DIRECTORY_INSTANCE_HOST ,
'snmpTrapPort' : SNMP_TRAP_PORT ,
'snmpTrapCommunity' : defTrapsCommunityProp ,
'snmpTrapNumber' : '2,0,0,0,0,0' ,
'outputFile' : outputFile2
}
</call>
</sequence>
<sequence>
<message>
'trap_customconf: wait event from the trap listener'
</message>
<call function="'WaitEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_customconf: delete event from the trap listener'
</message>
<call function="'DeleteEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_defaultconf: restart the server'
</message>
<call function="'StopDsWithScript'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'dsRestart' : 'True'
}
</call>
<message>
'trap_customconf: send event to the trap listener'
</message>
<call function="'SendEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
}
</call>
</sequence>
</parallel>
</sequence>
</timer>
<script>timerRC2 = RC</script>
<call function="'checkTimerResult'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'outputFile' : outputFile2 ,
'timerDuration' : timerDuration2 ,
'timerRC' : timerRC2
}
</call>
<message>
'trap_customconf: restore the traps-destination property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--reset traps-destination'
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<if expr="is_windows_platform(DIRECTORY_INSTANCE_HOST)">
<script>
knownIssue(3435)
</script>
</if>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker SNMP trap with custom configuration
#@TestName trap_customconf: TODO
#@TestIssue none
#@TestPurpose TODO.
#@TestPreamble none
#@TestStep TODO.
#@TestPostamble none
#@TestResult TODO.
-->
<testcase name="getTestCaseName
('trap_customconf: set traps-destination property to a wrong value')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'trap_customconf: change the traps-destination property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--set traps-destination:%s' \
% wrongTrapsDestProp
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<timer duration="timerDuration2">
<sequence>
<parallel>
<sequence>
<message>
'trap_customconf: run the trap listener'
</message>
<call function="'SNMPTrapListener'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'snmpHost' : DIRECTORY_INSTANCE_HOST ,
'snmpTrapPort' : SNMP_TRAP_PORT ,
'snmpTrapCommunity' : defTrapsCommunityProp ,
'snmpTrapNumber' : '0,0,0,0,0,0' ,
'outputFile' : outputFile2
}
</call>
</sequence>
<sequence>
<message>
'trap_customconf: wait event from the trap listener'
</message>
<call function="'WaitEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_customconf: delete event from the trap listener'
</message>
<call function="'DeleteEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_defaultconf: restart the server'
</message>
<call function="'StopDsWithScript'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'dsHost' : DIRECTORY_INSTANCE_HOST ,
'dsPort' : DIRECTORY_INSTANCE_PORT ,
'dsBindDN' : DIRECTORY_INSTANCE_DN ,
'dsBindPwd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<call function="'StartDsWithScript'">
{ 'location' : STAF_REMOTE_HOSTNAME }
</call>
<script>
returnString = STAXResult[0][1]
</script>
<!--- Check that DS started -->
<call function="'isAlive'">
{
'noOfLoops' : 5 ,
'noOfMilliSeconds' : 2000
}
</call>
<script>
msg1 = 'Traps Destination %s is an unknown host.' \
% wrongTrapsDestProp
msg2 = 'Traps will not be sent to this destination'
msg = '%s %s' % (msg1, msg2)
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg
}
</call>
<script>
msg1 = 'No valid trap destinations has been found.'
msg2 = 'No trap will be sent'
msg = '%s %s' % (msg1, msg2)
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg
}
</call>
<message>
'trap_customconf: send event to the trap listener'
</message>
<call function="'SendEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
}
</call>
</sequence>
</parallel>
</sequence>
</timer>
<script>timerRC2 = RC</script>
<call function="'checkTimerResult'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'outputFile' : outputFile2 ,
'timerDuration' : timerDuration2 ,
'timerRC' : timerRC2
}
</call>
<message>
'trap_customconf: restore the traps-destination property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--reset traps-destination'
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker SNMP trap with custom configuration
#@TestName trap_customconf: TODO
#@TestIssue 3435
#@TestPurpose TODO.
#@TestPreamble none
#@TestStep TODO.
#@TestPostamble none
#@TestResult TODO.
-->
<testcase name="getTestCaseName
('trap_customconf: set traps-destination property to a list')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'trap_customconf: set traps-destination property to a list'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--set traps-destination:%s' \
% wrongTrapsDestProp
}
</call>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--add traps-destination:%s' \
% newTrapsDestProp
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<timer duration="timerDuration2">
<sequence>
<parallel>
<sequence>
<message>
'trap_customconf: run the trap listener'
</message>
<call function="'SNMPTrapListener'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'snmpHost' : DIRECTORY_INSTANCE_HOST ,
'snmpTrapPort' : SNMP_TRAP_PORT ,
'snmpTrapCommunity' : defTrapsCommunityProp ,
'snmpTrapNumber' : '2,0,0,0,0,0' ,
'outputFile' : outputFile2
}
</call>
</sequence>
<sequence>
<message>
'trap_customconf: wait event from the trap listener'
</message>
<call function="'WaitEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_customconf: delete event from the trap listener'
</message>
<call function="'DeleteEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'name' : 'SNMPTrapListener/Ready'
}
</call>
<message>
'trap_defaultconf: restart the server'
</message>
<call function="'StopDsWithScript'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'dsHost' : DIRECTORY_INSTANCE_HOST ,
'dsPort' : DIRECTORY_INSTANCE_PORT ,
'dsBindDN' : DIRECTORY_INSTANCE_DN ,
'dsBindPwd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<call function="'StartDsWithScript'">
{ 'location' : STAF_REMOTE_HOSTNAME }
</call>
<script>
returnString = STAXResult[0][1]
</script>
<!--- Check that DS started -->
<call function="'isAlive'">
{
'noOfLoops' : 5 ,
'noOfMilliSeconds' : 2000
}
</call>
<script>
msg1 = 'Traps Destination %s is an unknown host.' \
% wrongTrapsDestProp
msg2 = 'Traps will not be sent to this destination'
msg = '%s %s' % (msg1, msg2)
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg
}
</call>
<message>
'trap_customconf: send event to the trap listener'
</message>
<call function="'SendEvent'">
{
'location' : STAF_REMOTE_HOSTNAME ,
}
</call>
</sequence>
</parallel>
</sequence>
</timer>
<script>timerRC2 = RC</script>
<call function="'checkTimerResult'">
{
'location' : STAF_REMOTE_HOSTNAME ,
'outputFile' : outputFile2 ,
'timerDuration' : timerDuration2 ,
'timerRC' : timerRC2
}
</call>
<message>
'trap_customconf: restore the traps-destination property'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--reset traps-destination'
}
</call>
<message>
'trap_customconf: restart the SNMP Connection Handler'
</message>
<call function="'restartSNMPConnectionHandler'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD
}
</call>
<if expr="is_windows_platform(DIRECTORY_INSTANCE_HOST)">
<script>
knownIssue(3435)
</script>
</if>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker SNMP trap with custom configuration
#@TestName trap_customconf: TODO
#@TestIssue none
#@TestPurpose TODO.
#@TestPreamble none
#@TestStep TODO.
#@TestPostamble none
#@TestResult TODO.
-->
<testcase name="getTestCaseName
('trap_customconf: set the traps-community property to a list')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'trap_customconf: set the traps-community property to a list'
</message>
<call function="'dsconfig'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : 'set-connection-handler-prop' ,
'objectType' : 'handler-name' ,
'objectName' : 'SNMP Connection Handler' ,
'optionsString' : '--add traps-community:%s' \
% newTrapsCommunityProp ,
'expectedRC' : 1
}
</call>
<script>
returnString = STAXResult[0][1]
if is_windows_platform(DIRECTORY_INSTANCE_HOST):
newline = '\r\n'
else:
newline = '\n'
returnString = STAXResult[0][1]
msg1 = 'It is not possible to specify multiple values for the'
msg2 = 'SNMP Connection Handler%sproperty "traps-community"' \
% newline
msg3 = 'as it is single-valued'
msg = '%s %s %s' % (msg1, msg2, msg3)
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<call function="'testSuite_Postamble'"/>
</sequence>
</block>
</sequence>
</function>
</stax>