incompatible_options.xml revision d81978a0815d5b8a75633c35e3e1f8708d36f017
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!--
! CDDL HEADER START
!
! The contents of this file are subject to the terms of the
! Common Development and Distribution License, Version 1.0 only
! (the "License"). You may not use this file except in compliance
! with the License.
!
! You can obtain a copy of the license at
! See the License for the specific language governing permissions
! and limitations under the License.
!
! When distributing Covered Code, exclude this CDDL HEADER in each
! file and exclude the License file at
! trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,
! add the following below this CDDL HEADER, with the fields enclosed
! by brackets "[]" replaced with your own identifying information:
! Portions Copyright [yyyy] [name of copyright owner]
!
! CDDL HEADER END
!
! Copyright 2008 Sun Microsystems, Inc.
! -->
<stax>
<defaultcall function="incompatible_options"/>
<function name="incompatible_options">
<sequence>
<!--- Test Suite information
#@TestSuiteName Setup-Uninstall incompatible_options Tests
#@TestSuitePurpose Test incompatibilities between options of
both setup and uninstall commands. In other words,
if 2 incompatible options are specified on the
same command line, the command should fail
#@TestSuiteGroup incompatible_options
#@TestSuiteID incompatible_options Tests
#@TestGroup Setup-Uninstall
#@TestScript incompatible_options.xml
#@TestHTMLLink http://opends.dev.java.net/
-->
<script>
if not CurrentTestPath.has_key('group'):
CurrentTestPath['group'] = 'setup'
CurrentTestPath['suite'] = 'incompatible_options'
</script>
<call function="'testSuite_Preamble'"/>
<!--- Test Case information
#@TestMarker Setup-Uninstall incompatible_options Tests
#@TestName Setup-Uninstall: incompatible_options:
inc_base_ldif
#@TestID inc_base_ldif
#@TestPurpose Check that 'addBaseEntry' and 'ldifFile' setup
options cannot be specified together
#@TestPreamble
#@TestStep Setup OpenDS with 'addBaseEntry' and 'ldifFile'
options, and check for error
#@TestPostamble
#@TestResult PASS if all steps ran without errors
-->
<testcase name="getTestCaseName('inc_base_ldif')">
<sequence>
<script>
</script>
<call function="'testCase_Preamble'"/>
<message>'Incompatible Options: addBaseEntry ldifFile'</message>
<script>
p = []
p.append('--cli --no-prompt --ldapPort 10000')
p.append('--rootUserPassword "kangourou"')
p.append('--baseDN "o=o1"')
p.append('--addBaseEntry')
p.append('--ldifFile %s' % INC_LDIF_FILE)
p = ' '.join(p)
</script>
<message>'%s %s' % (c, p)</message>
<call function="'runCommand'">
{ 'location' : STAF_REMOTE_HOSTNAME,
'name' : 'Launch setup command',
'command' : c,
'arguments' : p,
'path' : ODS_UNZIPPED,
'expectedRC': 2,
'outputFile': '%s/inc-base-ldif-setup.txt' % OUT_GROUP,
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker Setup-Uninstall incompatible_options Tests
#@TestName Setup-Uninstall: incompatible_options:
inc_base_data
#@TestID inc_base_data
#@TestPurpose Check that 'addBaseEntry' and 'sampleData' setup
options cannot be specified together
#@TestPreamble
#@TestStep Setup OpenDS with 'addBaseEntry' and 'sampleData'
options, and check for error
#@TestPostamble
#@TestResult PASS if all steps ran without errors
-->
<testcase name="getTestCaseName('inc_base_data')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>'Incompatible Options: addBaseEntry sampleData'</message>
<script>
p = []
p.append('--cli --no-prompt --ldapPort 10000')
p.append('--rootUserPassword "kangourou"')
p.append('--baseDN "o=o1"')
p.append('--addBaseEntry')
p.append('--sampleData 10')
p = ' '.join(p)
</script>
<message>'%s %s' % (c, p)</message>
<call function="'runCommand'">
{ 'location' : STAF_REMOTE_HOSTNAME,
'name' : 'Launch setup command',
'command' : c,
'arguments' : p,
'path' : ODS_UNZIPPED,
'expectedRC': 2,
'outputFile': '%s/inc-base-data-setup.txt' % OUT_GROUP,
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker Setup-Uninstall Incompatible options
#@TestName Setup-Uninstall: incompatible_options:
inc_ldif_data
#@TestID inc_ldif_data
#@TestPurpose Check that 'ldifFile' and 'sampleData' setup
options cannot be specified together
#@TestPreamble
#@TestStep Setup OpenDS with 'ldifFile' and
'sampleData' options, and check for error
#@TestPostamble
#@TestResult PASS if all steps ran without errors
-->
<testcase name="getTestCaseName('inc_ldif_data')">
<sequence>
<script>
</script>
<call function="'testCase_Preamble'"/>
<message>'Incompatible Options: ldifFile sampleData'</message>
<script>
p = []
p.append('--cli --no-prompt --ldapPort 10000')
p.append('--rootUserPassword "kangourou"')
p.append('--baseDN "o=o1"')
p.append('--ldifFile %s' % INC_LDIF_FILE)
p.append('--sampleData 10')
p = ' '.join(p)
</script>
<message>'%s %s' % (c, p)</message>
<call function="'runCommand'">
{ 'location' : STAF_REMOTE_HOSTNAME,
'name' : 'Launch setup command',
'command' : c,
'arguments' : p,
'path' : ODS_UNZIPPED,
'expectedRC': 2,
'outputFile': '%s/inc-ldif-data-setup.txt' % OUT_GROUP,
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker Setup-Uninstall Incompatible options
#@TestName Setup-Uninstall: incompatible_options:
inc_userpwd_userpwdfile
#@TestID inc_userpwd_userpwdfile
#@TestPurpose Check that 'rootUserPassword' and
'rootUserPasswordFile' setup options cannot
be specified together
#@TestPreamble
#@TestStep Setup OpenDS with 'rootUserPassword' and
'rootUserPasswordFile' options, and check
for error
#@TestPostamble
#@TestResult PASS if all steps ran without errors
-->
<testcase name="getTestCaseName('inc_userpwd_userpwdfile')">
<sequence>
<script>
</script>
<call function="'testCase_Preamble'"/>
<message>
'Incompatible Options: rootUserPasswordFile rootUserPassword'
</message>
<script>
p = []
p.append('--cli --no-prompt --ldapPort 10000')
p.append('--rootUserPassword "kangourou"')
p.append('--rootUserPasswordFile %s' % INC_USER_PWD_FILE)
p.append('--baseDN "o=o1"')
p = ' '.join(p)
</script>
<message>'%s %s' % (c, p)</message>
<call function="'runCommand'">
{ 'location' : STAF_REMOTE_HOSTNAME,
'name' : 'Launch setup command',
'command' : c,
'arguments' : p,
'path' : ODS_UNZIPPED,
'expectedRC': 2,
'outputFile': '%s/inc-userpwd-userpwdfile.txt' % OUT_GROUP,
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<call function="'testSuite_Postamble'"/>
</sequence>
</function>
</stax>