security_lockout_fail_cnt.xml revision d25372dc8e65a9ed019a88fdf659ca61313f1b31
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!--
! CDDL HEADER START
!
! The contents of this file are subject to the terms of the
! Common Development and Distribution License, Version 1.0 only
! (the "License"). You may not use this file except in compliance
! with the License.
!
! You can obtain a copy of the license at
! See the License for the specific language governing permissions
! and limitations under the License.
!
! When distributing Covered Code, include this CDDL HEADER in each
! file and include the License file at
! trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,
! add the following below this CDDL HEADER, with the fields enclosed
! by brackets "[]" replaced with your own identifying information:
! Portions Copyright [yyyy] [name of copyright owner]
!
! CDDL HEADER END
!
! Copyright 2006-2008 Sun Microsystems, Inc.
! -->
<stax>
<defaultcall function="lockout_fail_cnt"/>
<function name="lockout_fail_cnt">
<sequence>
<!--- Test Suite information
#@TestSuiteName Lockout Failure Count
#@TestSuitePurpose Test the password Policy Lockout Failure Count
#@TestSuiteGroup Lockout Failure Count
#@TestScript security_lockout_fail_cnt.xml
-->
<!--- Define default value for basedn,basepwp, msg -->
<script>
basedn = 'ou=people,ou=password tests,o=Pwd Policy Tests,dc=example,dc=com'
basepwp = 'cn=Default Password Policy,cn=Password Policies,cn=config'
msg = 'Security: Lockout Fail Cnt:'
msg1 = 'get-remaining-authentication-failure-count'
msg2 = 'Remaining Authentication Failure Count:'
</script>
<!--- Test Case information
#@TestMarker Lockout Failure Count
#@TestName Test Preamble
#@TestIssue none
#@TestPurpose Check Default value ds-cfg-lockout-failure-count
#@TestPreamble none
#@TestStep Step 1. Check for existence of
ds-cfg-lockout-failure-count and value is 0
#@TestStep Step 2. Default Bind With Bad Pwd 3x RC 49
then User search with good password returns 0
#@TestStep Step 3. check manage-account
get-remaining-authentication-failure-count
#@TestPostamble none
#@TestResult Success if the 3 steps are PASS
-->
<testcase name="getTestCaseName('Preamble')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'%s Preamble Step 1. Check for existence of ds-cfg-lockout-failure-count' % msg
</message>
<call function="'compareEntry'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'attrToBeCompared' : 'ds-cfg-lockout-failure-count:0',
'entryToBeCompared' : basepwp }
</call>
<message>
'%s Preamble Step 2. Default Bind With Bad Pwd 3x' % msg
</message>
<script>
search_pwds = ['bad', 'bad', 'bad']
</script>
<iterate var="pwds" in="search_pwds" indexvar="index">
<call function="'SearchObject'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : 'uid=bhall,%s' % basedn ,
'dsInstancePswd' : '%s' % pwds,
'dsBaseDN' : 'dc=example,dc=com' ,
'dsFilter' : 'objectclass=*' ,
'extraParams' : '-s base' ,
'expectedRC' : 49 }
</call>
</iterate>
<call function="'SearchObject'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : 'uid=bhall,%s' % basedn ,
'dsInstancePswd' : 'oranges',
'dsBaseDN' : 'dc=example,dc=com' ,
'dsFilter' : 'objectclass=*' ,
'extraParams' : '-s base' }
</call>
<message>
'%s Preamble Step 3. Check manage-account %s' % (msg,msg1)
</message>
<call function="'manageAccountWithScript'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : msg1 ,
'targetDn' : 'uid=bhall,%s' % basedn }
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{ 'returnString' : returnString ,
'expectedString' : msg2 }
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker Lockout Failure Count
#@TestName Admin Change Lockout Count
#@TestIssue none
#@TestPurpose Admin Change Lockout Count
#@TestPreamble none
#@TestStep Admin Changing Lockout Count set
lockout-failure-count to 3
#@TestStep check manage-account
get-remaining-authentication-failure-count
#@TestPostamble none
#@TestResult Success if all tests are PASS
-->
<testcase name="getTestCaseName('Admin Change Lockout Cnt')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'Security: Lockout Fail Cnt: Admin Changing Lockout Count'
</message>
<call function="'modifyPwdPolicy'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'propertyName' : 'Default Password Policy' ,
'attributeName' : 'lockout-failure-count' ,
'attributeValue' : '3' }
</call>
<message>
'%s Check manage-account %s' % (msg,msg1)
</message>
<call function="'manageAccountWithScript'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : msg1 ,
'targetDn' : 'uid=bhall,%s' % basedn }
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{ 'returnString' : returnString ,
'expectedString' : '%s 3' % msg2 }
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker Lockout Failure Count
#@TestName Lockout With Bad Pwd 3x
#@TestIssue none
#@TestPurpose Lockout With Bad Pwd 3x
#@TestPreamble none
#@TestStep Lockout With Bad Pwd 3x SearchObject RC 49 3x
#@TestStep check manage-account
get-remaining-authentication-failure-count
#@TestPostamble none
#@TestResult Success if all tests are PASS
-->
<testcase name="getTestCaseName('Lockout With Bad Pwd 3x')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'%s Lockout With Bad Pwd 3x' % msg
</message>
<script>
search_pwds = ['bad', 'bad', 'bad', 'oranges']
</script>
<iterate var="pwds" in="search_pwds" indexvar="index">
<call function="'SearchObject'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : 'uid=bhall,%s' % basedn ,
'dsInstancePswd' : '%s' % pwds,
'dsBaseDN' : 'dc=example,dc=com' ,
'dsFilter' : 'objectclass=*' ,
'extraParams' : '-s base' ,
'expectedRC' : 49 }
</call>
</iterate>
<message>
'%s Check manage-account %s' % (msg,msg1)
</message>
<call function="'manageAccountWithScript'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'subcommand' : msg1 ,
'targetDn' : 'uid=bhall,%s' % basedn }
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{ 'returnString' : returnString ,
'expectedString' : '%s 0' % msg2 }
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker Lockout Failure Count
#@TestName Postamble Reset
#@TestIssue none
#@TestPurpose Reseting the Password policy and verify it
#@TestPreamble none
#@TestStep Step 1. Admin Resetting Lockout Fail Count
set lockout-failure-count to 0
#@TestStep Step 2. Check Bind With Previous User Lockout RC 0
#@TestStep Step 3. Check Bind With Bad Pwd 3x RC 49 3x
then User search with good password returns 0
#@TestPostamble none
#@TestResult Success if the 3 steps are PASS
-->
<testcase name="getTestCaseName('Postamble Reset')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'%s Postamble Reset: Step 1. Admin Resetting Lockout Fail Count' % msg
</message>
<call function="'modifyPwdPolicy'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'propertyName' : 'Default Password Policy' ,
'attributeName' : 'lockout-failure-count' ,
'attributeValue' : '0' }
</call>
<message>
'%s Postamble Step 2. Check Bind With Previous User Lockout' % msg
</message>
<!--- Check Lockouted User -->
<call function="'SearchObject'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : 'uid=bhall,%s' % basedn ,
'dsInstancePswd' : 'oranges' ,
'dsBaseDN' : 'dc=example,dc=com' ,
'dsFilter' : 'objectclass=*' ,
'extraParams' : '-s base' }
</call>
<message>
'%s Postamble Step 3. Check Bind With Bad Pwd 3x' % msg
</message>
<script>
search_pwds = ['bad', 'bad', 'bad']
</script>
<iterate var="pwds" in="search_pwds" indexvar="index">
<call function="'SearchObject'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : 'uid=gfarmer,%s' % basedn ,
'dsInstancePswd' : '%s' % pwds,
'dsBaseDN' : 'dc=example,dc=com' ,
'dsFilter' : 'objectclass=*' ,
'extraParams' : '-s base',
'expectedRC' : 49 }
</call>
</iterate>
<call function="'SearchObject'">
{ 'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : 'uid=gfarmer,%s' % basedn ,
'dsInstancePswd' : 'ruling',
'dsBaseDN' : 'dc=example,dc=com' ,
'dsFilter' : 'objectclass=*' ,
'extraParams' : '-s base'}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
</sequence>
</function>
</stax>