clu_dbtest_checkbehavior.xml revision d81978a0815d5b8a75633c35e3e1f8708d36f017
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!--
! CDDL HEADER START
!
! The contents of this file are subject to the terms of the
! Common Development and Distribution License, Version 1.0 only
! (the "License"). You may not use this file except in compliance
! with the License.
!
! You can obtain a copy of the license at
! See the License for the specific language governing permissions
! and limitations under the License.
!
! When distributing Covered Code, exclude this CDDL HEADER in each
! file and exclude the License file at
! trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,
! add the following below this CDDL HEADER, with the fields enclosed
! by brackets "[]" replaced with your own identifying information:
! Portions Copyright [yyyy] [name of copyright owner]
!
! CDDL HEADER END
!
! Copyright 2008 Sun Microsystems, Inc.
! -->
<stax>
<defaultcall function="clu_dbtest_checkbehavior"/>
<function name="clu_dbtest_checkbehavior">
<sequence>
<block name="'clu_dbtest_checkbehavior'">
<sequence>
<!--- Test Suite information
#@TestSuiteName dbtest check behavior tests
#@TestSuitePurpose Test the results of the dbtest command.
#@TestSuiteGroup dbtest check behavior tests
#@TestScript clu_dbtest_checkbehavior.xml
-->
<script>
if not CurrentTestPath.has_key('group'):
CurrentTestPath['group'] = 'clu'
CurrentTestPath['suite'] = STAXCurrentBlock
</script>
<call function="'testSuite_Preamble'"/>
<!--- Test Case information
#@TestMarker dbtest check behavior tests
#@TestName dbtest: list root containers
#@TestIssue none
#@TestPurpose Test dbtest with list-root-containers option
#@TestPreamble none
#@TestStep Do an dbtest with list-root-containers option.
#@TestStep Check the output of the command.
#@TestPostamble none
#@TestResult Success if dbtest returns 0 and if the
output is correct.
-->
<testcase name="getTestCaseName('dbtest: list root containers')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'dbtest: list root containers'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'list-root-containers'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'userRoot db'
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total: 1'
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker dbtest check behavior tests
#@TestName dbtest: list entry containers
#@TestIssue none
#@TestPurpose Test dbtest with list-entry-containers option
for backend userRoot
#@TestPreamble none
#@TestStep Do an dbtest with list-entry-containers option
for backend userRoot.
#@TestStep Check the output of the command.
#@TestPostamble none
#@TestResult Success if dbtest returns 0 and if the
output is correct.
-->
<testcase name="getTestCaseName('dbtest: list entry containers')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'dbtest: list entry containers for backend userRoot'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'list-entry-containers' ,
'dsBackendID' : 'userRoot'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'dc=com dc_com 1208'
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'dc=mycom dc_mycom 11'
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total: 2'
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker dbtest check behavior tests
#@TestName dbtest: list index status
#@TestIssue none
#@TestPurpose Test dbtest with list-index-status option
for backend userRoot and baseDN dc=com
#@TestPreamble none
#@TestStep Do an dbtest with list-index-status option
for backend userRoot and baseDN dc=com.
#@TestStep Check the output of the command.
#@TestPostamble none
#@TestResult Success if dbtest returns 0 and if the
output is correct.
-->
<testcase name="getTestCaseName('dbtest: list index status')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'dbtest: list index status for backend userRoot and \
baseDN dc=com'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'list-index-status' ,
'dsBaseDN' : 'dc=com' ,
'dsBackendID' : 'userRoot'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<script>
msg1 = 'uid.equality Index'
msg2 = 'dc_com_uid.equality true'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : '%s %s' % (msg1, msg2)
}
</call>
<script>
msg1 = 'st.equality Index'
msg2 = 'dc_com_st.equality true'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : '%s %s' % (msg1, msg2)
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total: 20'
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker dbtest check behavior tests
#@TestName dbtest: list database containers
#@TestIssue none
#@TestPurpose Test dbtest with list-database-containers
option for backend userRoot and baseDN dc=com
#@TestPreamble none
#@TestStep Do an dbtest with list-root-containers option.
#@TestStep Check the output of the command.
#@TestPostamble none
#@TestResult Success if dbtest returns 0 and if the
output is correct.
-->
<testcase name="getTestCaseName('dbtest: list database containers')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'dbtest: list database containers for backend userRoot \
and baseDN dc=com'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'list-database-containers' ,
'dsBaseDN' : 'dc=com' ,
'dsBackendID' : 'userRoot'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<script>
msg1 = 'dn2id DN2ID'
msg2 = 'dc_com_dn2id 1208'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : '%s %s' % (msg1, msg2)
}
</call>
<script>
msg1 = 'id2entry ID2Entry'
msg2 = 'dc_com_id2entry 1208'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : '%s %s' % (msg1, msg2)
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total: 24'
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker dbtest check behavior tests
#@TestName dbtest: dump database container
#@TestIssue none
#@TestPurpose Test dbtest with dump database container
option for backend userRoot, baseDN dc=com
and database st.equality
#@TestPreamble none
#@TestStep Do an dbtest with dump database container
option for backend userRoot, baseDN dc=com
and database dn2entry.
#@TestStep Check the output of the command.
#@TestStep Do an dbtest with dump database container
option for backend userRoot, baseDN dc=com,
database st.equality, minSize 176
and maxSize 184.
#@TestStep Check the output of the command.
#@TestStep Do an dbtest with dump database container
option for backend userRoot, baseDN dc=com,
database st.equality, minKey wv
and maxKey wy.
#@TestStep Check the output of the command.
#@TestPostamble none
#@TestResult Success if dbtest returns 0 and if the
output is correct.
-->
<testcase name="getTestCaseName('dbtest: dump database container')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'dbtest: dump database container for backend userRoot, \
baseDN dc=com and database dn2entry'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'dump-database-container' ,
'dsBaseDN' : 'dc=com' ,
'dsBackendID' : 'userRoot' ,
'dsDatabaseName' : 'dn2id'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total Records: 1208'
}
</call>
<message>
'dbtest: dump database container for backend userRoot, \
baseDN dc=com, database st.equality, minSize 176, maxSize 184'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'dump-database-container' ,
'dsBaseDN' : 'dc=com' ,
'dsBackendID' : 'userRoot' ,
'dsDatabaseName' : 'st.equality' ,
'dsMinDataSize' : 176 ,
'dsMaxDataSize' : 184
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total Records: 6'
}
</call>
<message>
'dbtest: dump database container for backend userRoot, \
baseDN dc=com, database st.equality, minKey wv, maxKey wy'
</message>
<call function="'dbtestWithScript'">
{
'subcommand' : 'dump-database-container' ,
'dsBaseDN' : 'dc=com' ,
'dsBackendID' : 'userRoot' ,
'dsDatabaseName' : 'st.equality' ,
'dsMinKeyValue' : 'wv' ,
'dsMaxKeyValue' : 'wy'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Total Records: 2'
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<call function="'testSuite_Postamble'"/>
</sequence>
</block>
</sequence>
</function>
</stax>