# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License, Version 1.0 only

# (the "License"). You may not use this file except in compliance

# with the License.

#

# You can obtain a copy of the license at

# trunk/opends/resource/legal-notices/OpenDS.LICENSE

# or https://OpenDS.dev.java.net/OpenDS.LICENSE.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at

# trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,

# add the following below this CDDL HEADER, with the fields enclosed

# by brackets "[]" replaced with your own identifying information:

# Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

# Copyright 2006-2008 Sun Microsystems, Inc.

#

# Global directives

#

global.category=DSCONFIG

#

# Format string definitions

#

# Keys must be formatted as follows:

#

# [SEVERITY]_[DESCRIPTION]_[ORDINAL]

#

# where:

#

# SEVERITY is one of:

# [INFO, MILD_WARN, SEVERE_WARN, MILD_ERR, SEVERE_ERR, FATAL_ERR, DEBUG, NOTICE]

#

# DESCRIPTION is an upper case string providing a hint as to the context of

# the message in upper case with the underscore ('_') character serving as

# word separator

#

# ORDINAL is an integer unique among other ordinals in this file

#

SEVERE_ERR_DSCFG_ERROR_CANNOT_READ_CONNECTION_PARAMETERS_1000=The connection \

parameters could not be read due to the following error: %s

SEVERE_ERR_DSCFG_ERROR_LDAP_SIMPLE_BIND_FAILED_1001=Unable to authenticate to \

the server as %s

SEVERE_ERR_DSCFG_ERROR_LDAP_FAILED_TO_CONNECT_1002=Unable to connect to the \

server at %s on port %s

SEVERE_ERR_DSCFG_ERROR_LDAP_SIMPLE_BIND_NOT_SUPPORTED_1003=Unable to \

authenticate using simple authentication

INFO_DSCFG_DESCRIPTION_SUBCMD_CREATE_1004=Creates %s

INFO_DSCFG_DESCRIPTION_SUBCMD_DELETE_1005=Deletes %s

INFO_DSCFG_DESCRIPTION_SUBCMD_LIST_1006=Lists existing %s

INFO_DSCFG_DESCRIPTION_SUBCMD_GETPROP_1007=Shows %s properties

INFO_DSCFG_DESCRIPTION_SUBCMD_SETPROP_1008=Modifies %s properties

SEVERE_ERR_DSCFG_ERROR_MISSING_SUBCOMMAND_1009=A sub-command must be \

specified

INFO_DSCFG_DESCRIPTION_TYPE_1010=The type of %s which should be created. The \

value for TYPE can be one of: %s

SEVERE_ERR_DSCFG_ERROR_NO_PASSWORD_1011=No password was specified for \

administrator "%s"

SEVERE_ERR_DSCFG_ERROR_PROPERTY_UNRECOGNIZED_1012=The property "%s" is not a \

recognized property of %s

SEVERE_ERR_DSCFG_ERROR_PROPERTY_INVALID_VALUE_1013=The value "%s" is not a \

valid value for the %s property "%s" which has the following syntax: %s

SEVERE_ERR_DSCFG_ERROR_PROPERTY_READ_ONLY_1014=The %s property "%s" is \

read-only and cannot be modified

SEVERE_ERR_DSCFG_ERROR_PROPERTY_MANDATORY_1015=The %s property "%s" is \

mandatory and must be specified

SEVERE_ERR_DSCFG_ERROR_PROPERTY_SINGLE_VALUED_1016=It is not possible to \

specify multiple values for the %s property "%s" as it is single-valued

INFO_DSCFG_DESCRIPTION_SUBCMD_HELPPROP_1017=Describes managed objects and \

their properties

INFO_DSCFG_HEADING_COMPONENT_NAME_1018=Component

INFO_DSCFG_HEADING_PROPERTY_NAME_1019=Property

INFO_DSCFG_HEADING_PROPERTY_VALUE_1020=Value(s)

INFO_DSCFG_HEADING_PROPERTY_SYNTAX_1021=Syntax

INFO_DSCFG_HEADING_PROPERTY_OPTIONS_1022=Options

INFO_DSCFG_HEADING_PROPERTY_DEFAULT_1023=Default

INFO_DSCFG_HEADING_PROPERTY_DESCRIPTION_1024=Description

INFO_DSCFG_DESCRIPTION_PROPERTY_SYNTAX_HELP_1025=See detailed help

SEVERE_ERR_DSCFG_ERROR_GET_PARENT_DDE_1026=The parent %s could not be \

retrieved because its type could not be determined. This is probably due to \

the %s having an invalid LDAP entry. Check that the %s has the correct object \

classes

SEVERE_ERR_DSCFG_ERROR_GET_PARENT_MODE_1027=The parent %s could not be \

retrieved because of the reasons listed below:

SEVERE_ERR_DSCFG_ERROR_GET_PARENT_MONFE_1028=The parent %s does not exist

SEVERE_ERR_DSCFG_ERROR_GET_PARENT_AUTHZ_1029=The parent %s could not be \

retrieved because you do not have the correct authorization

SEVERE_ERR_DSCFG_ERROR_GET_PARENT_CE_1030=The parent %s could not be \

retrieved due to a communications problem: %s

SEVERE_ERR_DSCFG_ERROR_GET_PARENT_CME_1031=The parent %s could not be \

retrieved because another client is currently making conflicting \

configuration changes

SEVERE_ERR_DSCFG_ERROR_CREATE_MMPE_1032=The %s could not be created because \

the following mandatory properties must be defined:

SEVERE_ERR_DSCFG_ERROR_CREATE_MOAEE_1033=The %s could not be created because \

there is already an existing one with the same name

SEVERE_ERR_DSCFG_ERROR_CREATE_AUTHZ_1034=The %s could not be created because \

you do not have the correct authorization

SEVERE_ERR_DSCFG_ERROR_CREATE_CE_1035=The %s could not be created due to a \

communications problem: %s

SEVERE_ERR_DSCFG_ERROR_CREATE_CME_1036=The %s could not be created because \

another client is currently making conflicting configuration changes

SEVERE_ERR_DSCFG_ERROR_DELETE_MONFE_1038=The %s could not be deleted because \

it does not exist

SEVERE_ERR_DSCFG_ERROR_DELETE_AUTHZ_1039=The %s could not be deleted because \

you do not have the correct authorization

SEVERE_ERR_DSCFG_ERROR_DELETE_CE_1041=The %s could not be deleted due to a \

communications problem: %s

SEVERE_ERR_DSCFG_ERROR_DELETE_CME_1042=The %s could not be deleted because \

another client is currently making conflicting configuration changes

SEVERE_ERR_DSCFG_ERROR_GET_CHILD_DDE_1043=The %s could not be retrieved \

because its type could not be determined. This is probably due to the %s \

having an invalid LDAP entry. Check that the %s object classes are correct

SEVERE_ERR_DSCFG_ERROR_GET_CHILD_MODE_1044=The %s could not be retrieved \

because of the reasons listed below:

SEVERE_ERR_DSCFG_ERROR_GET_CHILD_MONFE_1045=The %s does not exist

SEVERE_ERR_DSCFG_ERROR_GET_CHILD_AUTHZ_1046=The %s could not be accessed \

because you do not have the correct authorization

SEVERE_ERR_DSCFG_ERROR_GET_CHILD_CE_1047=The %s could not be accessed due to \

a communications problem: %s

SEVERE_ERR_DSCFG_ERROR_GET_CHILD_CME_1048=The %s could not be accessed \

because another client is currently making conflicting configuration changes

SEVERE_ERR_DSCFG_ERROR_MODIFY_MONFE_1049=The %s could not be modified because \

it does not exist

SEVERE_ERR_DSCFG_ERROR_MODIFY_AUTHZ_1050=The %s could not be modified because \

you do not have the correct authorization

SEVERE_ERR_DSCFG_ERROR_MODIFY_CE_1051=The %s could not be modified due to a \

communications problem: %s

SEVERE_ERR_DSCFG_ERROR_MODIFY_CME_1052=The %s could not be modified because \

another client is currently making conflicting configuration changes

SEVERE_ERR_DSCFG_ERROR_LIST_DDE_1054=The %s could not be retrieved because \

its type could not be determined. This is probably due to the %s having an \

invalid LDAP entry. Check that the %s object classes are correct

SEVERE_ERR_DSCFG_ERROR_LIST_MODE_1055=The %s could not be retrieved because \

of the reasons listed below:

SEVERE_ERR_DSCFG_ERROR_LIST_MONFE_1056=The %s does not exist

SEVERE_ERR_DSCFG_ERROR_LIST_AUTHZ_1057=The %s could not be listed because you \

do not have the correct authorization

SEVERE_ERR_DSCFG_ERROR_LIST_CE_1058=The %s could not be listed due to a \

communications problem: %s

SEVERE_ERR_DSCFG_ERROR_LIST_CME_1059=The %s could not be listed because \

another client is currently making conflicting configuration changes

SEVERE_ERR_DSCFG_ERROR_PROPERTY_UNKNOWN_ERROR_1060=The value(s) of the %s \

property "%s" could not be determined due to an unknown error: %s

SEVERE_ERR_DSCFG_ERROR_PROPERTY_DEFAULT_BEHAVIOR_1061=The default value(s) of \

the %s property "%s" could not be determined due to the following reason: %s

SEVERE_ERR_DSCFG_ERROR_PROPERTY_INHERITED_DEFAULT_BEHAVIOR_1062=The inherited \

default value(s) of the %s property "%s" could not be determined

SEVERE_ERR_DSCFG_ERROR_NO_SEPARATOR_IN_PROPERTY_VALUE_1063=The property \

argument "%s" does not contain a name/value separator. The argument should \

have the following syntax: property:value

SEVERE_ERR_DSCFG_ERROR_NO_NAME_IN_PROPERTY_VALUE_1064=The property argument \

"%s" does not contain a property name. The argument should have the following \

syntax: property:value

SEVERE_ERR_DSCFG_ERROR_NO_VALUE_IN_PROPERTY_VALUE_1065=The property argument \

"%s" does not contain a property value. The argument should have the \

following syntax: property:value

SEVERE_ERR_DSCFG_ERROR_SUB_TYPE_UNRECOGNIZED_1066=The sub-type "%s" is not a \

recognized type of %s. It should be one of: %s

SEVERE_ERR_DSCFG_ERROR_TYPE_UNRECOGNIZED_FOR_CATEGORY_1067="%s" component \

type that cannot be used with category "%s"

SEVERE_ERR_DSCFG_ERROR_NO_SEPARATOR_IN_PROPERTY_MOD_1068=The property \

modification "%s" does not contain a name/value separator. The argument \

should have the following syntax: property[+|-]:value

SEVERE_ERR_DSCFG_ERROR_NO_NAME_IN_PROPERTY_MOD_1069=The property modification \

"%s" does not contain a property name. The argument should have the following \

syntax: property[+|-]:value

SEVERE_ERR_DSCFG_ERROR_NO_VALUE_IN_PROPERTY_MOD_1070=The property \

modification "%s" does not contain a property value. The argument should have \

the following syntax: property[+|-]:value

SEVERE_ERR_DSCFG_ERROR_INCOMPATIBLE_PROPERTY_MOD_1071=The property \

modification "%s" is incompatible with a previous modification to the same \

property

SEVERE_ERR_DSCFG_ERROR_WRONG_MANAGED_OBJECT_TYPE_1072=The %s could not be \

retrieved because it was the wrong type of managed object: %s

INFO_DSCFG_DESCRIPTION_TYPE_DEFAULT_1073=The type of %s which should be \

created (Default: %s). The value for TYPE can be one of: %s

INFO_DSCFG_DESCRIPTION_RECORD_1074=Modifies the display output to show one \

property value per line

INFO_DSCFG_DESCRIPTION_UNIT_TIME_1078=Display time data using the specified \

unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, \

seconds, minutes, hours, days, or weeks)

INFO_DSCFG_DESCRIPTION_UNIT_SIZE_1079=Display size data using the specified \

unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, \

kilobytes, megabytes, gigabytes, or terabytes)

INFO_DSCFG_ERROR_TIME_UNIT_UNRECOGNIZED_1080=The time unit "%s" is invalid. \

The valid time units are ms, s, m, h, d, or w (milliseconds, seconds, \

minutes, hours, days, or weeks)

INFO_DSCFG_ERROR_SIZE_UNIT_UNRECOGNIZED_1081=The size unit "%s" is invalid. \

The valid size units are b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, \

gigabytes, or terabytes)

INFO_DSCFG_HEADING_COMPONENT_TYPE_1082=Type

INFO_DSCFG_DESCRIPTION_SHOW_GROUP_USAGE_1083=Display subcommands relating to \

%s

INFO_DSCFG_DESCRIPTION_SHOW_GROUP_USAGE_ALL_1084=Display all subcommands

INFO_DSCFG_DESCRIPTION_SHOW_GROUP_USAGE_SUMMARY_1085=Display summary usage \

information

INFO_DSCFG_DESCRIPTION_NAME_1086=The name of the %s

INFO_DSCFG_DESCRIPTION_PROP_1087=The name of a property to be displayed

INFO_DSCFG_DESCRIPTION_PROP_VAL_1088=Assigns a value to a property where PROP \

is the name of the property and VAL is the single value to be assigned. \

Specify the same property multiple times in order to assign more than one \

value to it

INFO_DSCFG_DESCRIPTION_ADD_PROP_VAL_1089=Adds a single value to a property \

where PROP is the name of the property and VAL is the single value to be \

added

INFO_DSCFG_DESCRIPTION_REMOVE_PROP_VAL_1090=Removes a single value from a \

property where PROP is the name of the property and VAL is the single value \

to be removed

INFO_DSCFG_DESCRIPTION_RESET_PROP_1091=Resets a property back to its default \

values where PROP is the name of the property to be reset

INFO_DSCFG_DESCRIPTION_HELP_TYPE_1092=The type of components whose properties \

should be described. The value for TYPE must be one of the component types \

associated with the CATEGORY specified using the "--category" option

SEVERE_ERR_DSCFG_ERROR_BIND_PASSWORD_NONINTERACTIVE_1093=The LDAP bind \

password was not specified and cannot be read interactively

INFO_DSCFG_DESCRIPTION_FORCE_1196=Ignore non-existent %s

SEVERE_ERR_DSCFG_ERROR_UNABLE_TO_RESET_MANDATORY_PROPERTY_1200=The %s \

property "%s" is mandatory cannot be reset. Use the "%s" option to specify a \

new value

SEVERE_ERR_DSCFG_ERROR_ILLEGAL_NAME_SYNTAX_1204=The name "%s" is not a valid \

name for the %s which has the following syntax: %s

SEVERE_ERR_DSCFG_ERROR_ILLEGAL_NAME_EMPTY_1205=Empty names are not permitted \

for %s

SEVERE_ERR_DSCFG_ERROR_ILLEGAL_NAME_BLANK_1206=Blank names are not permitted \

for %s

SEVERE_ERR_DSCFG_ERROR_ILLEGAL_NAME_UNKNOWN_1207=The name "%s" is not a valid \

name for the %s

INFO_DSCFG_DESCRIPTION_NAME_CREATE_1208=The name of the new %s

INFO_DSCFG_DESCRIPTION_NAME_CREATE_EXT_1209=The name of the new %s which will \

also be used as the value of the "%s" property: %s

SEVERE_ERR_DSCFG_ERROR_UNABLE_TO_SET_NAMING_PROPERTY_1210=The property "%s" \

cannot be set as it is defined implicitly by the name of the %s

INFO_DSCFG_DESCRIPTION_ADVANCED_1216=Allows the configuration of advanced \

components and properties

SEVERE_ERR_DSCFG_ERROR_MISSING_NON_INTERACTIVE_ARG_1223=The argument "--%s" \

must be specified when this application is used non-interactively

SEVERE_ERR_DSCFG_ERROR_CANNOT_READ_CONSOLE_INPUT_1224=The response could not \

be read from the console due to the following error: %s

INFO_DSCFG_CREATE_TYPE_PROMPT_1225=>>>> Select the type of %s that you want to \

create:

INFO_DSCFG_CREATE_NAME_PROMPT_1226=>>>> Enter a name for the %s that you want to \

create:

SEVERE_ERR_DSCFG_ERROR_CREATE_NAME_ALREADY_EXISTS_1227=There is already \

another %s with the name "%s"

INFO_DSCFG_DESCRIPTION_CREATE_HELP_HEADING_TYPE_1228=Type

INFO_DSCFG_DESCRIPTION_CREATE_HELP_HEADING_DESCR_1229=Description

SEVERE_ERR_DSCFG_ERROR_FINDER_NO_CHILDREN_1230=Unable to continue since there \

are no %s currently configured on the server

SEVERE_ERR_DSCFG_ERROR_FINDER_SINGLE_CHILD_REJECTED_1231=Unable to continue \

because the only available %s was not selected

INFO_DSCFG_FINDER_PROMPT_SINGLE_1232=>>>> There is only one %s: "%s". Are you sure \

that this is the correct one?

INFO_DSCFG_FINDER_PROMPT_MANY_1233=>>>> Select the %s from the following list:

INFO_DSCFG_GENERAL_CHOICE_PROMPT_NOHELP_1237=Enter choice [1 - %d]:

INFO_DSCFG_GENERAL_CHOICE_PROMPT_HELP_1238=Enter choice [1 - %d, ? - help]:

SEVERE_ERR_DSCFG_ERROR_GENERAL_CHOICE_1239=Invalid response. Please enter a \

value between 1 and %d

INFO_DSCFG_HELP_FIELD_ENUM_1254=one of the following values:

INFO_DSCFG_HELP_FIELD_UNDEFINED_1255=undefined

INFO_DSCFG_HELP_FIELD_INHERITED_ABS_1256=inherits from the property "%s" in \

the %s

INFO_DSCFG_HELP_FIELD_INHERITED_PARENT_1257=inherits from the property "%s" \

in the parent %s

INFO_DSCFG_HELP_FIELD_INHERITED_THIS_1258=inherits from the property "%s" in \

this %s

INFO_DSCFG_HELP_FIELD_SERVER_RESTART_1259=The server must be restarted in \

order for changes to this property to take effect

INFO_DSCFG_HELP_FIELD_COMPONENT_RESTART_1260=The %s must be restarted in \

order for changes to this property to take effect

INFO_DSCFG_HELP_FIELD_READ_ONLY_1261=read-only - this property can only be \

specified when the %s is created

INFO_DSCFG_HELP_FIELD_MONITORING_1262=monitoring - this property is \

automatically generated by the server

INFO_DSCFG_HELP_HEADING_PROPERTY_1263=Property: %s

INFO_DSCFG_HELP_HEADING_COMPONENT_1264=Component name: %s

INFO_DSCFG_HELP_HEADING_DEFAULT_1265=Default behavior

INFO_DSCFG_HELP_HEADING_MANDATORY_1266=Mandatory

INFO_DSCFG_HELP_HEADING_ADVANCED_1267=Advanced

INFO_DSCFG_HELP_HEADING_MULTI_VALUED_1268=Multi-valued

INFO_DSCFG_HELP_HEADING_READ_ONLY_1269=Read-only

INFO_DSCFG_HELP_HEADING_SYNTAX_1270=Syntax

INFO_DSCFG_HELP_DESCRIPTION_OPTION_1271=Option Types:

INFO_DSCFG_HELP_DESCRIPTION_READ_1272=Property value(s) are readable

INFO_DSCFG_HELP_DESCRIPTION_WRITE_1273=Property value(s) are writable

INFO_DSCFG_HELP_DESCRIPTION_MANDATORY_1274=The property is mandatory

INFO_DSCFG_HELP_DESCRIPTION_SINGLE_VALUED_1275=The property is single-valued

INFO_DSCFG_HELP_DESCRIPTION_ADMIN_ACTION_1276=Administrative action is \

required for changes to take effect

INFO_DSCFG_CONFIRM_CREATE_1277=Are you sure that you want to create the %s?

INFO_DSCFG_CONFIRM_DELETE_1278=Are you sure that you want to delete the %s?

INFO_DSCFG_CONFIRM_MODIFY_1279=Are you sure that you want to modify the %s?

INFO_DSCFG_CONFIRM_CREATE_SUCCESS_1280=The %s was created successfully

INFO_DSCFG_CONFIRM_DELETE_SUCCESS_1281=The %s was deleted successfully

INFO_DSCFG_CONFIRM_MODIFY_SUCCESS_1282=The %s was modified successfully

INFO_DSCFG_CONFIRM_CREATE_FAIL_1283=The %s was not created

INFO_DSCFG_CONFIRM_DELETE_FAIL_1284=The %s was not deleted

INFO_DSCFG_CONFIRM_MODIFY_FAIL_1285=The %s was not modified

INFO_DSCFG_DESCRIPTION_HELP_CATEGORY_1286=The category of components whose \

properties should be described

SEVERE_ERR_DSCFG_ERROR_CATEGORY_UNRECOGNIZED_1287="%s" is not a recognized \

component category

SEVERE_ERR_DSCFG_ERROR_CATEGORY_TYPE_UNRECOGNIZED_1288="%s" is not a \

recognized component type in category "%s"

SEVERE_ERR_DSCFG_ERROR_PROPERTY_UNRECOGNIZED_NO_DEFN_1289=The property "%s" \

is not a recognized property

INFO_DSCFG_DESCRIPTION_HELP_INHERITED_1290=Modifies the display output to \

show the inherited properties of components

INFO_VALUE_TRUE_1291=true

INFO_VALUE_FALSE_1292=false

INFO_VALUE_UNLIMITED_1293=unlimited

INFO_EDITOR_PROMPT_SELECT_VALUE_SINGLE_1294=Select a value for the "%s" property:

INFO_EDITOR_PROMPT_SELECT_VALUE_MULTI_1295=Select one or more values for the "%s" property:

INFO_EDITOR_HEADING_SYNTAX_1296=Syntax:

INFO_EDITOR_HEADING_VALUES_SUMMARY_1297=The "%s" property has the following values:

INFO_EDITOR_PROMPT_SELECT_VALUES_ADD_1299=Select the values you wish to add:

INFO_EDITOR_PROMPT_SELECT_VALUES_REMOVE_1302=Select the values you wish to remove:

INFO_EDITOR_PROMPT_MODIFY_MENU_1303=Do you want to modify the "%s" property?

INFO_EDITOR_OPTION_ADD_ALL_VALUES_1300=Add all values

INFO_EDITOR_OPTION_ADD_ONE_OR_MORE_VALUES_1304=Add one or more values

INFO_EDITOR_OPTION_REMOVE_ONE_OR_MORE_VALUES_1305=Remove one or more values

INFO_EDITOR_OPTION_REMOVE_ALL_VALUES_1306=Remove all values

INFO_EDITOR_OPTION_REVERT_CHANGES_1307=Revert changes

INFO_EDITOR_OPTION_LEAVE_UNDEFINED_1311=Leave undefined

INFO_EDITOR_OPTION_USE_DEFAULT_ALIAS_1308=Use the default behavior: %s

INFO_EDITOR_OPTION_USE_DEFAULT_INHERITED_ALIAS_1309=Use the inherited default behavior: %s

INFO_EDITOR_OPTION_USE_DEFAULT_INHERITED_ALIAS_UNDEFINED_1310=Use the inherited default behavior: undefined

INFO_EDITOR_OPTION_USE_VALUE_1312=Use the value: %s

INFO_EDITOR_OPTION_USE_DEFAULT_VALUE_1313=Use the default value: %s

INFO_EDITOR_OPTION_USE_INHERITED_DEFAULT_VALUE_1314=Use the inherited default value: %s

INFO_EDITOR_OPTION_USE_VALUES_1315=Use these values

INFO_EDITOR_OPTION_USE_DEFAULT_VALUES_1316=Use these default values

INFO_EDITOR_OPTION_USE_INHERITED_DEFAULT_VALUES_1317=Use these inherited default values

INFO_EDITOR_OPTION_KEEP_DEFAULT_ALIAS_1318=Keep the default behavior: %s

INFO_EDITOR_OPTION_KEEP_DEFAULT_INHERITED_ALIAS_1319=Keep the inherited default behavior: %s

INFO_EDITOR_OPTION_KEEP_DEFAULT_INHERITED_ALIAS_UNDEFINED_1320=Keep the inherited default behavior: undefined

INFO_EDITOR_OPTION_KEEP_VALUE_1321=Keep the value: %s

INFO_EDITOR_OPTION_KEEP_DEFAULT_VALUE_1322=Keep the default value: %s

INFO_EDITOR_OPTION_KEEP_INHERITED_DEFAULT_VALUE_1323=Keep the inherited default value: %s

INFO_EDITOR_OPTION_KEEP_VALUES_1324=Keep these values

INFO_EDITOR_OPTION_KEEP_DEFAULT_VALUES_1325=Keep these default values

INFO_EDITOR_OPTION_KEEP_INHERITED_DEFAULT_VALUES_1326=Keep these inherited default values

INFO_EDITOR_OPTION_RESET_DEFAULT_ALIAS_1327=Reset to the default behavior: %s

INFO_EDITOR_OPTION_RESET_DEFAULT_INHERITED_ALIAS_1328=Reset to the inherited default behavior: %s

INFO_EDITOR_OPTION_RESET_DEFAULT_INHERITED_ALIAS_UNDEFINED_1329=Reset to the inherited default behavior: undefined

INFO_EDITOR_OPTION_RESET_DEFAULT_VALUE_1331=Reset to the default value: %s

INFO_EDITOR_OPTION_RESET_INHERITED_DEFAULT_VALUE_1332=Reset to the inherited default value: %s

INFO_EDITOR_OPTION_RESET_DEFAULT_VALUES_1334=Reset to the default values: %s

INFO_EDITOR_OPTION_RESET_INHERITED_DEFAULT_VALUES_1335=Reset to the inherited default values: %s

INFO_EDITOR_HEADING_READ_ONLY_ALIAS_UNDEFINED_1336=The "%s" property is undefined

INFO_EDITOR_HEADING_READ_ONLY_ALIAS_1337=The "%s" property is undefined: %s

INFO_EDITOR_HEADING_READ_ONLY_VALUE_1338=The "%s" property has the following value: %s

INFO_EDITOR_HEADING_READ_ONLY_VALUES_1339=The "%s" property has the following values:

INFO_EDITOR_PROMPT_READ_ONLY_1340=This property is read-only and cannot be modified. Would you like to view its help documentation?

INFO_EDITOR_OPTION_CHANGE_TO_DEFAULT_VALUE_1341=Change it to the default value: %s

INFO_EDITOR_OPTION_CHANGE_TO_VALUE_1342=Change it to the value: %s

INFO_EDITOR_OPTION_CHANGE_VALUE_1343=Change the value

INFO_EDITOR_HEADING_CONFIGURE_PROPERTY_1344=>>>> Configuring the "%s" property

INFO_EDITOR_PROMPT_READ_FIRST_VALUE_1345=Enter a value for the "%s" property:

INFO_EDITOR_PROMPT_READ_FIRST_VALUE_OPTIONAL_1346=Enter a value for the "%s" property [continue]:

INFO_EDITOR_PROMPT_READ_NEXT_VALUE_1347=Enter another value for the "%s" property [continue]:

SEVERE_ERR_EDITOR_READ_FIRST_DUPLICATE_1348=This property already contains the value "%s". Please enter a different value

SEVERE_ERR_EDITOR_READ_NEXT_DUPLICATE_1349=This property already contains the value "%s". Please enter a different value, or press RETURN to continue

INFO_EDITOR_HEADING_CONFIGURE_COMPONENT_1350=>>>> Configure the properties of the %s

INFO_EDITOR_OPTION_FINISH_CREATE_COMPONENT_1351=finish - create the new %s

INFO_EDITOR_OPTION_FINISH_MODIFY_COMPONENT_1352=finish - apply any changes to the %s

INFO_EDITOR_OPTION_FINISH_KEY_1353=f

INFO_EDITOR_HEADING_CONFIGURE_PROPERTY_CONT_1354=>>>> Configuring the "%s" property (Continued)

INFO_DSCFG_CREATE_NAME_PROMPT_NAMING_1355=>>>> Specify a name for the %s. This name will be used as the value for the "%s" property which has the following description:

INFO_DSCFG_CREATE_NAME_PROMPT_NAMING_CONT_1356=Enter a name for the %s that you want to create:

INFO_DSCFG_HEADING_MAIN_MENU_TITLE_1357=>>>> OpenDS configuration console main menu

INFO_DSCFG_HEADING_MAIN_MENU_PROMPT_1358=What do you want to configure?

INFO_DSCFG_HEADING_COMPONENT_MENU_TITLE_1359=>>>> %s management menu

INFO_DSCFG_HEADING_COMPONENT_MENU_PROMPT_1360=What would you like to do?

INFO_DSCFG_OPTION_COMPONENT_MENU_CREATE_1361=Create a new %s

INFO_DSCFG_OPTION_COMPONENT_MENU_MODIFY_SINGULAR_1362=View and edit the %s

INFO_DSCFG_OPTION_COMPONENT_MENU_MODIFY_PLURAL_1363=View and edit an existing %s

INFO_DSCFG_OPTION_COMPONENT_MENU_DELETE_1364=Delete an existing %s

INFO_DSCFG_OPTION_COMPONENT_MENU_LIST_PLURAL_1365=List existing %s

INFO_DSCFG_OPTION_COMPONENT_MENU_LIST_SINGULAR_1366=Show the %s

INFO_DSCFG_PROMPT_HOST_NAME_1367=Directory server hostname or IP address [%s]:

INFO_DSCFG_PROMPT_PORT_NUMBER_1368=Directory server administration port number [%d]:

INFO_DSCFG_PROMPT_BIND_DN_1369=Administrator user bind DN [%s]:

SEVERE_ERR_DSCFG_BAD_HOST_NAME_1370=The hostname "%s" could not be resolved. Please check you have provided the correct address

SEVERE_ERR_DSCFG_BAD_PORT_NUMBER_1371=Invalid port number "%s". Please enter a valid port number between 1 and 65535

INFO_DSCFG_GENERIC_TYPE_OPTION_1372=Generic %s

INFO_DSCFG_HEADING_CONNECTION_PARAMETERS_1373=>>>> Specify OpenDS LDAP connection parameters

INFO_DSCFG_PROMPT_SECURITY_USE_SECURE_CTX_1374=How do you want to connect?

INFO_DSCFG_PROMPT_SECURITY_USE_SSL_1375=LDAP with SSL

INFO_DSCFG_PROMPT_SECURITY_USE_START_TLS_1376=LDAP with StartTLS

INFO_DSCFG_PROMPT_SECURITY_USE_TRUST_ALL_1377=Do you want to automatically trust the server certificate?

INFO_DSCFG_PROMPT_SECURITY_TRUSTSTORE_PATH_1378=Truststore path:

INFO_DSCFG_PROMPT_SECURITY_TRUSTSTORE_PASSWORD_1379=Password for truststore '%s':

INFO_DSCFG_PROMPT_SECURITY_KEYSTORE_NEEDED_1380=Do you want to perform secure authentication (client side authentication)?

INFO_DSCFG_PROMPT_SECURITY_KEYSTORE_PATH_1381=Keystore path:

INFO_DSCFG_PROMPT_SECURITY_KEYSTORE_PASSWORD_1382=Password for keystore '%s':

INFO_DSCFG_PROMPT_SECURITY_CERTIFICATE_NAME_1383=Certificate nickname:

SEVERE_ERR_DSCFG_ERROR_CREATE_ORE_SINGLE_1384=The %s could not be created because of the following reason:

SEVERE_ERR_DSCFG_ERROR_CREATE_ORE_PLURAL_1385=The %s could not be created because of the following reasons:

SEVERE_ERR_DSCFG_ERROR_DELETE_ORE_SINGLE_1386=The %s could not be deleted because of the following reason:

SEVERE_ERR_DSCFG_ERROR_DELETE_ORE_PLURAL_1387=The %s could not be deleted because of the following reasons:

SEVERE_ERR_DSCFG_ERROR_MODIFY_ORE_SINGLE_1388=The %s could not be modified because of the following reason:

SEVERE_ERR_DSCFG_ERROR_MODIFY_ORE_PLURAL_1389=The %s could not be modified because of the following reasons:

INFO_DSCFG_PROMPT_SECURITY_LDAP_1390=LDAP

INFO_DSCFG_PROMPT_SECURITY_PROTOCOL_DEFAULT_CHOICE_1391=%d

SEVERE_ERR_DSCFG_PROMPT_SECURITY_INVALID_FILE_PATH_1392=The provided path is not valid

INFO_DSCFG_PROMPT_EDIT_AGAIN_1393=Would you like to edit the properties of the %s again in order to resolve this problem?

SEVERE_ERR_DSCFG_ERROR_TYPE_UNRECOGNIZED_FOR_SUBCOMMAND_1394="%s" component \

type cannot be used with subcommand {%s}

INFO_EDITOR_PROMPT_SELECT_COMPONENT_MULTI_127=Select one or more %s for the "%s" property:

INFO_EDITOR_PROMPT_SELECT_COMPONENT_SINGLE_128=Select a %s for the "%s" property:

INFO_EDITOR_HEADING_COMPONENT_SUMMARY_129=The "%s" property references the following %s:

INFO_EDITOR_PROMPT_SELECT_COMPONENTS_ADD_130=Select the %s you wish to add:

INFO_EDITOR_OPTION_ADD_ALL_COMPONENTS_131=Add all %s

INFO_EDITOR_PROMPT_SELECT_COMPONENTS_REMOVE_132=Select the %s you wish to remove:

INFO_EDITOR_OPTION_CHANGE_TO_DEFAULT_COMPONENT_133=Change it to the default %s: %s

INFO_EDITOR_OPTION_CHANGE_TO_COMPONENT_134=Change it to the %s: %s

INFO_EDITOR_PROMPT_ENABLED_REFERENCED_COMPONENT_135=The referenced %s \

called "%s" must be enabled so that it can be used with this %s. Do \

you want to enable it?

SEVERE_ERR_SET_REFERENCED_COMPONENT_DISABLED_136=The modifications to \

the %s cannot be made because it contains a reference to a \

disabled %s

SEVERE_ERR_CREATE_REFERENCED_COMPONENT_DISABLED_137=The %s cannot be created \

because it contains a reference to a disabled %s

SEVERE_ERR_CREATE_HEADING_MMPE_SINGLE_138=The %s could not be created because the following mandatory property was not defined:

SEVERE_ERR_CREATE_HEADING_MMPE_PLURAL_139=The %s could not be created because the following mandatory properties were not defined:

SEVERE_ERR_MODIFY_HEADING_MMPE_SINGLE_140=The %s could not be modified because the following mandatory property was not defined:

SEVERE_ERR_MODIFY_HEADING_MMPE_PLURAL_141=The %s could not be modified because the following mandatory properties were not defined:

INFO_DSCFG_PROMPT_EDIT_142=Would you like to edit the properties of the %s in order to resolve this problem?

SEVERE_ERR_GET_HEADING_MODE_SINGLE_143=The %s could not be decoded due to the following reason:

SEVERE_ERR_GET_HEADING_MODE_PLURAL_144=The %s could not be decoded due to the following reasons:

INFO_EDITOR_OPTION_CREATE_A_NEW_COMPONENT_145=Create a new %s

INFO_DSCFG_PROMPT_EDIT_TO_ENABLE_146=The referenced %s \

called "%s" must be enabled so that it can be used with this %s. Do \

you want to edit its properties in order to enable it?

INFO_DSCFG_CUSTOM_TYPE_OPTION_147=Custom %s

INFO_DSCFG_CUSTOM_TYPE_SYNOPSIS_148=A Custom %s with a user-defined \

implementation class

INFO_DSCFG_GENERIC_TYPE_SYNOPSIS_149=A Generic %s

INFO_DSCFG_CREATE_TYPE_HELP_HEADING_150=Help: %s

INFO_DSCFG_NON_INTERACTIVE_151=The equivalent non-interactive command-line is:\

%n%s

INFO_DSCFG_DESCRIPTION_DISPLAY_EQUIVALENT_152=Display the equivalent \

non-interactive argument in the standard output when this command is run in \

interactive mode

INFO_DSCFG_DESCRIPTION_EQUIVALENT_COMMAND_FILE_PATH_153=The full path to the \

file where the equivalent non-interactive commands will be written when this \

command is run in interactive mode

MILD_ERR_DSCFG_ERROR_WRITING_EQUIVALENT_COMMAND_LINE_154=An error occurred \

while attempting to write equivalent non-interactive command line to file \

%s. Error details: %s

SEVERE_ERR_DSCFG_CANNOT_WRITE_EQUIVALENT_COMMAND_LINE_FILE_155=Cannot write \

to file %s. Verify that you have access rights to that file and that you \

provided the full path of the file

SEVERE_ERR_DSCFG_EQUIVALENT_COMMAND_LINE_FILE_DIRECTORY_156=The specified \

path %s to write the equivalent command is a directory. You must specify a \

path to a file

SEVERE_ERR_DSCFG_ERROR_LDAP_FAILED_TO_CONNECT_WRONG_PORT_157=Unable to connect to the \

server at %s on port %s. Check this port is an administration port

SEVERE_ERR_DSCFG_ERROR_LDAP_FAILED_TO_CONNECT_NOT_TRUSTED_158=Unable to connect to the \

server at %s on port %s. In non-interactive mode, you must use the '--trustAll' option