admin_tool.properties revision b369c17aec493f598a0fefe8885418cd3db596e9
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License"). You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at
# trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,
# add the following below this CDDL HEADER, with the fields enclosed
# by brackets "[]" replaced with your own identifying information:
# Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Portions Copyright 2006-2007 Sun Microsystems, Inc.
#
# Global directives
#
global.category=ADMIN_TOOL
#
# Format string definitions
#
# Keys must be formatted as follows:
#
# [SEVERITY]_[DESCRIPTION]
#
# where:
#
# SEVERITY is one of:
# [INFO, MILD_WARN, SEVERE_WARN, MILD_ERR, SEVERE_ERR, FATAL_ERR, DEBUG, NOTICE]
#
# DESCRIPTION is an upper case string providing a hint as to the context of
# the message in upper case with the underscore ('_') character serving as
# word separator
#
INFO_ADDRESS_PORT_COLUMN=Address:Port
INFO_ADMINISTRATIVE_USERS_LABEL=Administrative Users:
INFO_AGE_OF_OLDEST_MISSING_CHANGE_COLUMN=<html>Age of Oldest<br>Missing \
Change<br>(hh:mm:ss)
INFO_AGE_OF_OLDEST_MISSING_CHANGE_COLUMN_CLI=Age of Oldest Missing Change \
(hh:mm:ss)
INFO_AUTHENTICATE_BUTTON_LABEL=Authenticate
INFO_AUTHENTICATE_STATUS_PANEL_BUTTON_TOOLTIP=Authenticate as an \
administrative user to view all monitoring information
INFO_BACKENDID_COLUMN=Backend ID
INFO_BASEDN_COLUMN=Base DN
INFO_CANCEL_BUTTON_UNINSTALL_TOOLTIP=Cancel Uninstall
MILD_ERR_CANNOT_CONNECT_TO_LOGIN_WITH_CAUSE=Could not connect to the Directory \
Server with the provided credentials. The possible causes for this are:%n%s
MILD_ERR_CANNOT_CONNECT_TO_LOGIN_WITHOUT_CAUSE=Could not connect to the Directory \
Server with the provided credentials.%nCheck that the Administrative User DN \
and password are valid.
MILD_ERR_CANNOT_CONNECT_WITH_ADS_CREDENTIALS_WITHOUT_CAUSE=Could not connect to \
the Directory Server with the provided credentials.%nCheck that the \
Administrative User ID and password are valid.
INFO_CLI_UNINSTALL_CONFIRM_BACKUPS=Remove Backup Files Contained in bak \
Directory?
INFO_CLI_UNINSTALL_CONFIRM_CONFIGURATION_SCHEMA=Remove Configuration and \
Schema Files?
INFO_CLI_UNINSTALL_CONFIRM_DATABASES=Remove Database Contents?
INFO_CLI_UNINSTALL_CONFIRM_DELETE_FILES=The files will be permanently \
deleted, are you sure you want to continue?
INFO_CLI_UNINSTALL_CONFIRM_LDIFS=Remove LDIF Export Files Contained in ldif \
Directory?
INFO_CLI_UNINSTALL_CONFIRM_LIBRARIES_BINARIES=Remove Server Libraries and \
Administrative Tools?
INFO_CLI_UNINSTALL_CONFIRM_LOGS=Remove Log Files?
INFO_CLI_UNINSTALL_CONFIRM_OUTSIDEDBS=The Directory Server contains database \
files in the following locations outside the server path:%n%s%nRemove these \
files?
INFO_CLI_UNINSTALL_CONFIRM_OUTSIDELOGS=The Directory Server contains log \
files in the following locations outside the server path:%n%s%nRemove these \
files?
INFO_CLI_UNINSTALL_CONFIRM_PROMPT=%s%n[%s]:
INFO_CLI_UNINSTALL_CONFIRM_STOP=The OpenDS server is currently running and \
must be stopped before uninstallation can continue.%nStop the Server and \
permanently delete the files?
SEVERE_ERR_CLI_UNINSTALL_NOTHING_TO_BE_UNINSTALLED_NON_INTERACTIVE=You must \
select the elements to uninstall. Use the options described in the usage to \
specify what must be uninstalled.
SEVERE_ERR_CLI_UNINSTALL_NOTHING_TO_BE_UNINSTALLED=You must select something \
to be uninstalled.
INFO_CLI_UNINSTALL_SERVER_STOPPED=The Server is Stopped.
INFO_CLI_UNINSTALL_CONFIRM_UPDATE_REMOTE=This server is configured \
to do replication. In order to remove references to this server in other \
OpenDS servers you must provide administrator authentication. Do you want to \
provide authentication to remove the remote references?
INFO_CLI_UNINSTALL_CONFIRM_UPDATE_REMOTE_AND_START=This server is configured \
to do replication. In order to remove references to this server in other \
OpenDS servers the server must be started and then you must provide \
administrator authentication. Do you want to start the server and then \
provide authentication to remove the remote references?
INFO_UNINSTALL_CLI_REFERENCED_HOSTNAME_PROMPT=The name of this host (or IP \
address) as it is referenced in remote servers for replication
INFO_UNINSTALL_CONFIRM_PROVIDE_AUTHENTICATION_AGAIN=Do you want to provide \
authentication again? (If you say no, the references to this server in other \
OpenDS servers will not be removed).
INFO_CLI_UNINSTALL_WHAT_TO_DELETE=Do you want to remove all components of \
OpenDS or select the components to remove?%n1. Remove all components%n2. \
Select the components to be removed%n3. Neither; Quit the uninstaller
INFO_CLI_YES_LONG=yes
INFO_CLI_YES_SHORT=y
INFO_CLI_NO_LONG=no
INFO_CLI_NO_SHORT=n
INFO_CLOSE_BUTTON_UNINSTALL_TOOLTIP=Close Uninstall Window
INFO_CONFIRM_CLOSE_UNINSTALL_MSG=OpenDS Uninstall has not yet completed.%nAre \
you sure you want to close the Uninstall Window?
INFO_CONFIRM_CLOSE_UNINSTALL_TITLE=Confirmation Required
INFO_CLI_ACCEPT_CERTIFICATE_LONG=accept
INFO_CLI_ACCEPT_CERTIFICATE_SHORT=a
INFO_CLI_REJECT_CERTIFICATE_LONG=reject
INFO_CLI_REJECT_CERTIFICATE_SHORT=r
INFO_CLI_VIEW_CERTIFICATE_LONG=view
INFO_CLI_VIEW_CERTIFICATE_SHORT=v
INFO_CLI_ACCEPT_CERTIFICATE_PROMPT=Do you want to accept, view or reject the \
certificate?
INFO_CONFIRM_RESTART_MESSAGE=Are you sure you want to Restart the Directory \
Server?
INFO_CONFIRM_RESTART_TITLE=Confirmation Required
INFO_CONFIRM_STOP_MESSAGE=Are you sure you want to Stop the Directory Server?
INFO_CONFIRM_STOP_TITLE=Confirmation Required
INFO_CONFIRM_UNINSTALL_PANEL_INSTRUCTIONS=The OpenDS Uninstall tool will \
remove all parts of the OpenDS server you have selected below from your \
system. If all are selected, the server will be removed entirely.
INFO_CONFIRM_UNINSTALL_PANEL_TITLE=Uninstall Options
INFO_CONFIRM_UNINSTALL_REPLICATION_SERVER_NOT_RUNNING_MSG=This server is \
configured to do replication.%nIn order to remove references to this server \
in other OpenDS servers the server will be started and then you must provide \
administrator authentication.%n%nClick on 'Yes' to start the server and then \
provide authentication to remove the remote references.
INFO_CONFIRM_UNINSTALL_REPLICATION_SERVER_NOT_RUNNING_TITLE=Confirmation \
Required
INFO_CONFIRM_UNINSTALL_REPLICATION_SERVER_RUNNING_MSG=This server is \
configured to do replication.%nIn order to remove references to this server \
in other OpenDS servers you must provide administrator \
authentication.%n%nClick on 'Yes' to provide authentication to remove the \
remote references.
INFO_CONFIRM_UNINSTALL_REPLICATION_SERVER_RUNNING_TITLE=Confirmation Required
INFO_CONFIRM_UNINSTALL_SERVER_NOT_RUNNING_MSG=Confirm Uninstall%nAll selected \
files will be permanently deleted, are you sure you want to continue?
INFO_CONFIRM_UNINSTALL_SERVER_NOT_RUNNING_TITLE=Confirm Uninstall
INFO_CONFIRM_UNINSTALL_SERVER_RUNNING_MSG=Server is Running%nThe OpenDS \
server is currently running and must be stopped before uninstallation can \
continue. Do you want the uninstaller to stop the server for you and continue \
with the uninstall? If you click No, you will need to stop the server \
manually to continue.
MILD_ERR_UNINSTALL_READING_REGISTERED_SERVERS_CONFIRM_UPDATE_REMOTE=The \
following errors were encountered reading the configuration of the existing \
servers:\n%s\nDo you want the uninstaller to try to remove the references to \
this server in a best-effort mode?
INFO_CONFIRM_UNINSTALL_SERVER_RUNNING_TITLE=Server is Running
INFO_CONNECTIONS_LABEL=Open Connections:
MILD_ERR_COULD_NOT_FIND_VALID_LDAPURL=Error reading the configuration file.%n\
This could be caused because there is not an enabled LDAP port for the \
specified connection parameters or because you do not have read rights on the \
configuration file.
INFO_DATABASES_TITLE=Data Sources
INFO_DELETE_OUTSIDE_DBS_LABEL=Delete these Database Files
INFO_DELETE_OUTSIDE_DBS_MSG=The Directory Server contains database files in \
the following locations outside the server path:
INFO_DELETE_OUTSIDE_DBS_TOOLTIP=Check this box to Delete the Database Files \
located outside the install directory
INFO_DELETE_OUTSIDE_LOGS_LABEL=Delete these Log Files
INFO_DELETE_OUTSIDE_LOGS_MSG=The Directory Server contains log files in the \
following locations outside the server path:
INFO_DELETE_OUTSIDE_LOGS_TOOLTIP=Check this box to Delete the Log Files \
located outside the install directory
INFO_DISABLED_LABEL=Disabled
INFO_ENABLED_LABEL=Enabled
MILD_ERR_READING_CONFIG_FILE=Error reading the configuration file.
MILD_ERR_READING_CONFIG_LDAP=Error reading data from server. Verify the \
authentication information provided.%nDetails: %s
SEVERE_ERR_STARTING_SERVER_GENERIC=Could not Start server.
INFO_FINISH_BUTTON_UNINSTALL_LABEL=Uninstall
INFO_FINISH_BUTTON_UNINSTALL_TOOLTIP=Finish Uninstall
INFO_FRAME_UNINSTALL_TITLE=OpenDS Uninstall
INFO_INSTALLATION_PATH_LABEL=Installation Path:
INFO_JAVA_VERSION_LABEL=Java Version:
INFO_JMX_PROTOCOL_LABEL=JMX
INFO_JMX_SECURE_PROTOCOL_LABEL=JMX (Secure)
INFO_LDAP_PROTOCOL_LABEL=LDAP
INFO_LDAPS_PROTOCOL_LABEL=LDAPS
INFO_LISTENERS_TITLE=Listener Ports
INFO_LOGIN_CANCEL_BUTTON_TOOLTIP=Close Login Dialog
INFO_LOGIN_DIALOG_MSG=You must provide an Administrative User DN and password \
to retrieve monitoring information.
INFO_LOGIN_DIALOG_SERVER_NOT_RUNNING_MSG=The Directory Server is not running. \
Click OK to continue to the Status Panel.
INFO_LOGIN_DIALOG_SERVER_NOT_RUNNING_TITLE=Directory Server not Running
INFO_LOGIN_DIALOG_TITLE=Authentication Required
INFO_LOGIN_DN_LABEL=Administrative User DN:
INFO_LOGIN_DN_TOOLTIP=Enter the distinguished name (DN) of the Administrative \
User account that will used to retrieve monitoring information
INFO_LOGIN_OK_BUTTON_TOOLTIP=Proceed with authentication
INFO_LOGIN_PWD_LABEL=Administrative User Password:
INFO_LOGIN_PWD_TOOLTIP=Enter the password of the Administrative User account \
that will used to retrieve monitoring information
INFO_MISSING_CHANGES_COLUMN=Missing Changes
INFO_NO_DBS_FOUND=-No LDAP Databases Found-
INFO_NO_LISTENERS_FOUND=-No Listener Ports Found-
INFO_NOT_APPLICABLE_LABEL=--
INFO_NOT_AVAILABLE_AUTHENTICATION_REQUIRED_CLI_LABEL=<not available> (*)
INFO_NOT_AVAILABLE_AUTHENTICATION_REQUIRED_CLI_LEGEND=* Information only \
available if you provide authentication information when launching the status \
command.
INFO_NOT_AVAILABLE_AUTHENTICATION_REQUIRED_TOOLTIP=<html>Information is only \
available if you are authenticated<br>as an administrative user.
INFO_NOT_AVAILABLE_SERVER_DOWN_CLI_LABEL=<not available> (*)
INFO_NOT_AVAILABLE_SERVER_DOWN_CLI_LEGEND=* Information only available if \
server is running and you provide authentication information when launching \
the status command.
INFO_NOT_AVAILABLE_SERVER_DOWN_TOOLTIP=<html>Information is only available if \
server is running and you are authenticated<br>as an administrative user.
INFO_NOTHING_SELECTED_TO_UNINSTALL=You must select something to be \
uninstalled.
INFO_NUMBER_ENTRIES_COLUMN=Entries
INFO_NUMBER_ENTRIES_MULTIPLE_SUFFIXES_IN_DB=%s (for all base DNs in %s)
INFO_OPENDS_VERSION_LABEL=OpenDS Version:
INFO_PROGRESS_REMOVING_REFERENCES=Removing references on %s
INFO_PROTOCOL_COLUMN=Protocol
INFO_QUIT_STATUS_PANEL_BUTTON_TOOLTIP=Quit Status Panel
INFO_REMOVE_BACKUPS_LABEL=Backup Files Contained in bak Directory
INFO_REMOVE_BACKUPS_TOOLTIP=Remove Backup Files Contained in bak Directory
INFO_REMOVE_DATABASES_LABEL=Database Contents
INFO_REMOVE_DATABASES_TOOLTIP=Remove Database Contents
INFO_REMOVE_LABEL=Remove:
INFO_REMOVE_LDIFS_LABEL=LDIF Export Files Contained in ldif Directory
INFO_REMOVE_LDIFS_TOOLTIP=Remove LDIF Export Files Contained in ldif \
Directory
INFO_REMOVE_LIBRARIES_AND_TOOLS_LABEL=Server Libraries and Administrative \
Tools
INFO_REMOVE_LIBRARIES_AND_TOOLS_TOOLTIP=Remove Server Libraries and \
Administrative Tools
INFO_REMOVE_LOGS_LABEL=Log Files
INFO_REMOVE_LOGS_TOOLTIP=Remove Log Files
INFO_REMOVE_SCHEMA_AND_CONFIGURATION_LABEL=Configuration and Schema Files
INFO_REMOVE_SCHEMA_AND_CONFIGURATION_TOOLTIP=Remove Configuration and Schema \
Files
INFO_REPLICATED_COLUMN=Replication
INFO_RESTART_BUTTON_LABEL=Restart
INFO_RESTART_BUTTON_TOOLTIP=Restarts the Directory Server
INFO_SERVER_DETAILS_TITLE=Server Details
INFO_SERVER_PATH_LABEL=Server Path:
INFO_SERVER_STARTED_LABEL=Started
INFO_SERVER_STARTING_LABEL=Starting
INFO_SERVER_STATUS_LABEL=Server Run Status:
INFO_SERVER_STATUS_TITLE=Server Status
INFO_SERVER_STOPPED_LABEL=Stopped
INFO_SERVER_STOPPING_LABEL=Stopping
INFO_SERVER_UNKNOWN_STATUS_LABEL=Unknown
INFO_START_BUTTON_LABEL=Start
INFO_START_BUTTON_TOOLTIP=Starts the Directory Server
INFO_STATE_COLUMN=State
INFO_STATUS_CLI_USAGE_DESCRIPTION=This utility may be used to display basic \
server information
SEVERE_ERR_STATUS_PANEL_LAUNCHER_GUI_LAUNCH_FAILED=Could not launch Status \
Panel. Check that you have access to the display.
SEVERE_ERR_STATUS_PANEL_LAUNCHER_GUI_LAUNCH_FAILED_DETAILS=Could not launch \
Status Panel. Check that you have access to the display. Check file %s for \
details.
INFO_STATUS_PANEL_LAUNCHER_USAGE_DESCRIPTION=This utility may be used to \
display the Status Panel window which displays basic server information and \
allows to start, stop and restart the server.
INFO_STATUSPANEL_DIALOG_TITLE=OpenDS Status Panel
INFO_STOP_BUTTON_LABEL=Stop
INFO_STOP_BUTTON_TOOLTIP=Stops the Directory Server
INFO_SUFFIX_NOT_REPLICATED_LABEL=Disabled
INFO_SUFFIX_REPLICATED_LABEL=Enabled
INFO_SUMMARY_DELETING_EXTERNAL_DB_FILES=Deleting Database Files outside the \
Installation Path...
INFO_SUMMARY_DELETING_EXTERNAL_LOG_FILES=Deleting Log Files outside the \
Installation Path...
INFO_SUMMARY_DELETING_EXTERNAL_REFERENCES=Deleting External References...
INFO_SUMMARY_DELETING_INSTALLATION_FILES=Deleting Files under the \
Installation Path...
INFO_SUMMARY_DISABLING_WINDOWS_SERVICE=Disabling Windows Service...
INFO_SUMMARY_UNCONFIGURING_REPLICATION=Removing references in remote OpenDS \
servers...
INFO_SUMMARY_UNINSTALL_FINISHED_SUCCESSFULLY=<b>OpenDS Uninstall Completed \
Successfully.</b>
INFO_SUMMARY_UNINSTALL_FINISHED_SUCCESSFULLY_CLI=OpenDS Uninstall Completed \
Successfully.
INFO_SUMMARY_UNINSTALL_FINISHED_SUCCESSFULLY_REMOVE_JARFILES=<b>OpenDS \
Uninstall Completed Successfully.</b><br><br>To complete the uninstallation, \
you must delete manually the following files and directories:<br>%s
INFO_SUMMARY_UNINSTALL_FINISHED_SUCCESSFULLY_REMOVE_JARFILES_CLI=OpenDS \
Uninstall Completed Successfully.%nTo complete the uninstallation, you must \
delete manually the following files and directories:%n%s
INFO_SUMMARY_UNINSTALL_FINISHED_WITH_ERROR=An error occurred. Check \
'Details' text area for more information.
INFO_SUMMARY_UNINSTALL_FINISHED_WITH_ERROR_ON_REMOTE=<b>OpenDS Uninstall \
Succeeded With Warnings</b><br>OpenDS was successfully uninstalled in the \
local machine but some error occurred updating remote servers. Check \
'Details' text area for more information.
INFO_SUMMARY_UNINSTALL_FINISHED_WITH_ERROR_ON_REMOTE_CLI=OpenDS was \
successfully uninstalled in the local machine but some error occurred \
updating remote servers.
INFO_SUMMARY_UNINSTALL_NOT_STARTED=Starting Uninstallation...
INFO_UNDEFINED_PROTOCOL_LABEL=-Unknown-
SEVERE_ERR_UNINSTALL_LAUNCHER_GUI_LAUNCHED_FAILED=%n%nThe graphical Uninstall \
launch failed.%n%nLaunching command line Uninstall...
SEVERE_ERR_UNINSTALL_LAUNCHER_GUI_LAUNCHED_FAILED_DETAILS=%n%nThe graphical \
Uninstall launch failed. Check file %s for more details.%n%nLaunching \
command line Uninstall...
INFO_UNINSTALL_LAUNCHER_LAUNCHING_CLI=Launching command line uninstall...
INFO_UNINSTALL_LAUNCHER_LAUNCHING_GUI=Launching graphical uninstall...
INFO_UNINSTALL_LAUNCHER_USAGE_DESCRIPTION=This utility may be used to \
uninstall the Directory Server.
INFO_UNINSTALL_LOGIN_CANCEL_BUTTON_TOOLTIP=Close this dialog and do not try \
to remove references of this server in other OpenDS servers.
INFO_UNINSTALL_LOGIN_DIALOG_MSG=You must provide a Global Administrative User \
ID to be able to remove the references to this server in other OpenDS \
servers.%nYou must also provide the name of this host (or IP address) as it \
is referenced in remote servers.
INFO_UNINSTALL_LOGIN_HOST_NAME_LABEL=Host Name:
INFO_UNINSTALL_LOGIN_HOST_NAME_TOOLTIP=The name of this host (or IP address) \
as it is referenced in other OpenDS servers.
INFO_UNINSTALL_LOGIN_OK_BUTTON_TOOLTIP=Try to connect with the provided \
authentication.
INFO_UNINSTALL_LOGIN_PWD_TOOLTIP=The password of the Global Administrator to \
be used to read and update configuration in other OpenDS servers.
INFO_UNINSTALL_LOGIN_UID_TOOLTIP=The Global Administrator User ID to be used \
to read and update configuration in other OpenDS servers.
INFO_UNKNOWN_LABEL=--
INFO_UNINSTALLDS_DESCRIPTION_FORCE=Specifies whether the uninstall should \
continue if there is an error updating references to this server in remote \
OpenDS instances or not. This argument is not compatible with interactive \
argument
INFO_DESCRIPTION_REFERENCED_HOST=The name of this host (or IP address) as \
it is referenced in remote servers for replication
INFO_UNINSTALLDS_DESCRIPTION_CLI=Specifies to use the command line \
install. If not specified the graphical interface will be launched. The \
rest of the options (excluding help and version) will only be taken into \
account if this option is specified
INFO_UNINSTALLDS_DESCRIPTION_QUIET=Perform a quiet uninstall (no \
progress information is written to the standard output)
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_ALL=Remove all components of \
OpenDS (this option is not compatible with the rest of remove options)
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_SERVER_LIBRARIES=Remove Server Libraries \
and Administrative Tools
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_DATABASES=Remove database contents
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_LOG_FILES=Remove log files
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_CONFIGURATION_FILES=Remove configuration \
files
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_BACKUP_FILES=Remove backup files
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_LDIF_FILES=Remove LDIF files
INFO_DESCRIPTION_ADMIN_UID=Specifies the User ID of the Global Administrator \
to use to bind to the server
INFO_DESCRIPTION_ENABLE_REPLICATION_HOST1=Directory server hostname or IP \
address of the first server whose contents will be replicated
INFO_DESCRIPTION_ENABLE_REPLICATION_SERVER_PORT1=Directory server port \
number of the first server whose contents will be replicated
INFO_DESCRIPTION_ENABLE_REPLICATION_BINDDN1=Specifies the DN to use to \
bind to the first server whose contents will be replicated. If not specified \
the global administrator will be used to bind
INFO_DESCRIPTION_ENABLE_REPLICATION_BINDPASSWORD1=Specifies the password \
to use to bind to the first server whose contents will be replicated. If no \
bind DN was specified for the first server the password of the global \
administrator will be used to bind
INFO_DESCRIPTION_ENABLE_REPLICATION_BINDPASSWORDFILE1=Specifies the file \
containing the password to use to bind to the first server whose contents \
will be replicated. If no bind DN was specified for the first server the \
password of the global administrator will be used to bind
INFO_DESCRIPTION_ENABLE_REPLICATION_USE_SSL1=Use SSL for secure \
communication with the first server
INFO_DESCRIPTION_ENABLE_REPLICATION_STARTTLS1=Use StartTLS to secure \
communication with the first server
INFO_DESCRIPTION_ENABLE_REPLICATION_PORT1=Specifies the port that will be used by \
the replication mechanism in the first server to communicate with the other \
servers. You have to specify this option only if replication was not \
previously configured in the first server.
INFO_DESCRIPTION_ENABLE_REPLICATION_HOST2=Directory server hostname or IP \
address of the second server whose contents will be replicated
INFO_DESCRIPTION_ENABLE_REPLICATION_SERVER_PORT2=Directory server port \
number of the first server whose contents will be replicated
INFO_DESCRIPTION_ENABLE_REPLICATION_BINDDN2=Specifies the DN to use to \
bind to the second server whose contents will be replicated. If not \
specified the global administrator will be used to bind
INFO_DESCRIPTION_ENABLE_REPLICATION_BINDPASSWORD2=Specifies the password \
to use to bind to the second server whose contents will be replicated. If no \
bind DN was specified for the first server the password of the global \
administrator will be used to bind
INFO_DESCRIPTION_ENABLE_REPLICATION_BINDPASSWORDFILE2=Specifies the file \
containing the password to use to bind to the second server whose contents \
will be replicated. If no bind DN was specified for the first server the \
password of the global administrator will be used to bind
INFO_DESCRIPTION_ENABLE_REPLICATION_USE_SSL2=Use SSL for secure \
communication with the second server
INFO_DESCRIPTION_ENABLE_REPLICATION_PORT2=Specifies the port that will be used by \
the replication mechanism in the second server to communicate with the other \
servers. You have to specify this option only if replication was not \
previously configured in the second server.
INFO_DESCRIPTION_ENABLE_REPLICATION_STARTTLS2=Use StartTLS to secure \
communication with the second server
INFO_DESCRIPTION_REPLICATION_BASEDNS=Specifies the Base DN of \
the data to be replicated, initialized or for which we want to disable \
replication. Multiple base DNs may be provided by using this option multiple \
times
INFO_DESCRIPTION_REPLICATION_ADMIN_UID=Specifies the User ID of the \
Global Administrator to use to bind to the server. For the {%s} subcommand \
if no Global Administrator was defined previously for none of the server one \
will be created using the provided data.
INFO_DESCRIPTION_REPLICATION_ADMIN_BINDPASSWORD=The global \
administrator password
INFO_DESCRIPTION_REPLICATION_ADMIN_BINDPASSWORDFILE=The file \
containing the password of the global administrator
INFO_DESCRIPTION_INITIALIZE_REPLICATION_HOST_SOURCE=Directory server \
hostname or IP address of the source server whose contents will be used to \
initialize the destination server.
INFO_DESCRIPTION_INITIALIZE_REPLICATION_SERVER_PORT_SOURCE=Directory \
server port number of the source server whose contents will be used to \
initialize the destination server.
INFO_DESCRIPTION_INITIALIZE_REPLICATION_USE_SSL_SOURCE=Use SSL for secure \
communication with the source server
INFO_DESCRIPTION_INITIALIZE_REPLICATION_STARTTLS_SOURCE=Use StartTLS to \
secure communication with the source server
INFO_DESCRIPTION_INITIALIZE_REPLICATION_HOST_DESTINATION=Directory server \
hostname or IP address of the source server whose contents will be used to \
initialize the destination server.
INFO_DESCRIPTION_INITIALIZE_REPLICATION_SERVER_PORT_DESTINATION=Directory \
server port number of the source server whose contents will be used to \
initialize the destination server.
INFO_DESCRIPTION_INITIALIZE_REPLICATION_USE_SSL_DESTINATION=Use SSL for \
secure communication with the source server
INFO_DESCRIPTION_INITIALIZE_REPLICATION_STARTTLS_DESTINATION=Use \
StartTLS to secure communication with the source server
INFO_REPLICATION_TOOL_DESCRIPTION=This utility may be used to configure \
replication between servers so that the data of the servers is synchronized.\
In order replication to work you have first to enable replication using the \
{%s} subcommand and then initialize the contents of one of \
servers with the contents of the other using the {%s} subcommand.
INFO_REPLICATION_DESCRIPTION_QUIET=Perform a quiet operation (no \
progress information is written to the standard output)
INFO_DESCRIPTION_SUBCMD_INITIALIZE_REPLICATION=Initialize the contents of the \
data under the specified Bind DN on the destination server with the contents \
on the source server. This operation is required after enabling replication \
in order replication to work.
INFO_DESCRIPTION_SUBCMD_ENABLE_REPLICATION=Updates the configuration of the \
servers to replicate the data under the specified Base DN. If one of the \
specified servers is already replicating the data under the Base DN with \
other servers, executing this subcommand will update the configuration of all \
the servers (so it is sufficient to execute the command line once for each \
server we add to the replication topology).
INFO_DESCRIPTION_SUBCMD_DISABLE_REPLICATION=Disables replication on the \
specified server for the provided Base DN and removes references in the other \
servers with which it is replicating data.
SEVERE_ERR_REPLICATION_NO_BASE_DN_PROVIDED=You must provide at least one base \
DN in no interactive mode.
SEVERE_ERR_REPLICATION_NO_ADMINISTRATOR_PASSWORD_PROVIDED=You must provide the \
password of the global administrator in non interactive mode. You can \
provide it using the {%s} or the {%s} options.
SEVERE_ERR_REPLICATION_NOT_A_VALID_BASEDN=The provided value %s is not a valid \
base DN.
SEVERE_ERR_REPLICATION_SAME_SERVER_PORT=You have to provide two different \
servers to replicate. You have provided twice the server %s:%s
SEVERE_ERR_REPLICATION_SAME_REPLICATION_PORT=You have provided the same \
replication port (%s) for two servers located on the same machine (%s).
SEVERE_ERR_REPLICATION_VALID_SUBCOMMAND_NOT_FOUND=Could not find a valid \
subcommand.
INFO_REPLICATION_SUCCESSFUL=The operation has been successfully completed
INFO_REPLICATION_SUCCESSFUL_NOP=The operation has been successfully completed, \
but no action was required
MILD_ERR_REPLICATION_USER_CANCELLED=User cancelled the operation
SEVERE_ERR_REPLICATION_NO_MESSAGE=
INFO_ADMINISTRATOR_UID_PROMPT=Global Administrator User ID:
INFO_ADMINISTRATOR_PWD_PROMPT=Global Administrator Password:
INFO_ADMINISTRATOR_PWD_CONFIRM_PROMPT=Confirm Password:
MILD_ERR_ADMINISTRATOR_PWD_DO_NOT_MATCH=The provided passwords do not match.
MILD_ERR_ERROR_CONNECTING_TO_SERVER_PROMPT_AGAIN=Could not connect to the \
Directory Server %s with the provided credentials.%nProvide again the \
required information to connect to the server:
INFO_REPLICATION_ENABLE_HOSTNAME1_PROMPT=Host name of the first server:
INFO_REPLICATION_ENABLE_PORT1_PROMPT=LDAP port of the first server:
INFO_REPLICATION_ENABLE_REPLICATIONPORT1_PROMPT=Replication port for the first \
server (the port must be free):
INFO_REPLICATION_ENABLE_HOSTNAME2_PROMPT=Host name of the second server:
INFO_REPLICATION_ENABLE_PORT2_PROMPT=LDAP port of the second server:
INFO_REPLICATION_ENABLE_REPLICATIONPORT2_PROMPT=Replication port for the \
second server (the port must be free):
INFO_REPLICATION_INITIALIZE_HOSTNAMESOURCE_PROMPT=Host name of the source \
server:
INFO_REPLICATION_INITIALIZE_PORTSOURCE_PROMPT=LDAP port of the source server:
INFO_REPLICATION_DISABLE_HOSTNAME_PROMPT=Host name of the server:
INFO_REPLICATION_DISABLE_PORT_PROMPT=LDAP port of the server:
INFO_REPLICATION_INITIALIZE_HOSTNAMEDESTINATION_PROMPT=Host name of the \
destination server:
INFO_REPLICATION_INITIALIZE_PORTDESTINATION_PROMPT=LDAP port of the \
destination server:
INFO_REPLICATION_BINDDN_PROMPT=Bind DN
INFO_REPLICATION_PASSWORD_PROMPT=Password
INFO_REPLICATION_USESSL_PROMPT=Use SSL to connect
INFO_CLI_INVALID_PORT=The provided value is not a valid port
INFO_REPLICATION_USESTARTTLS_PROMPT=Use StartTLS to connect
SEVERE_ERR_REPLICATION_PORT_AND_REPLICATION_PORT_EQUAL=The server LDAP port \
and the replication port cannot have the same value. You provided %s for both.
SEVERE_ERR_NO_SUFFIXES_AVAILABLE_TO_ENABLE_REPLICATION=There are no base DNs \
available to enable replication between the two servers.
INFO_ALREADY_REPLICATED_SUFFIXES=The following base DNs are already replicated \
between the two servers:%n%s
INFO_ALREADY_NOT_REPLICATED_SUFFIXES=The following base DNs are not replicated \
between the two servers:%n%s
MILD_ERR_REPLICATION_ENABLE_SUFFIXES_NOT_FOUND=The following base DNs cannot \
be replicated between the two servers because they could not be found in at \
least one of the servers:%n%s
MILD_ERR_NO_SUFFIXES_SELECTED_TO_REPLICATE=You must choose at least one base \
DN to be replicated.
INFO_REPLICATION_ENABLE_SUFFIX_PROMPT=Replicate base DN %s?
SEVERE_ERR_NO_SUFFIXES_AVAILABLE_TO_INITIALIZE_REPLICATION=There are no base \
DNs replicated between the two servers.
MILD_ERR_SUFFIXES_CANNOT_BE_INITIALIZED=The following base DNs cannot be \
initialized because they are not replicated or they are not configured on \
both servers:%n%s
MILD_ERR_NO_SUFFIXES_SELECTED_TO_INITIALIZE=You must choose at least one \
base DN to be initialized.
INFO_REPLICATION_INITIALIZE_SUFFIX_PROMPT=Initialize base DN %s?
SEVERE_ERR_NO_SUFFIXES_AVAILABLE_TO_DISABLE_REPLICATION=There are no base \
DNs replicated in the server.
MILD_ERR_REPLICATION_DISABLE_SUFFIXES_NOT_FOUND=The following base DNs could \
not be found on the server:%n%s
MILD_ERR_NO_SUFFIXES_SELECTED_TO_DISABLE=You must choose at least one \
base DN to be disabled.
INFO_REPLICATION_DISABLE_SUFFIX_PROMPT=Disable replication on base DN %s?
MILD_ERR_REPLICATION_READING_REGISTERED_SERVERS_CONFIRM_UPDATE_REMOTE=The \
following errors were encountered reading the configuration of the existing \
servers:\n%s\nIf you continue the replication tool will to try to update the \
configuration of all the servers in a best-effort mode. However it cannot \
guarantee that the servers that are generating errors will be updated. Do \
you want to continue?
MILD_ERR_NOT_ADMINISTRATIVE_USER=You do not have access rights to the \
configuration of the server.
INFO_REPLICATION_CONFIRM_DISABLE_ADS=You chose to disable replication on \
base DN %s. This base DN is used by the replication mechanism and by some \
administrative tools and it is not recommended to configure it directly. Do \
you want to continue?
INFO_REPLICATION_CONFIRM_DISABLE_GENERIC=Disabling replication will make the \
data under the selected base DNs not to be synchronized with other servers \
any more. Do you want to continue?
INFO_REPLICATION_CONFIRM_INITIALIZE_ADS=You chose to initialize the contents \
of base DN %s on server %s with the contents in server %s. This base DN is \
used by the replication mechanism and by some administrative tools and it is \
not recommended to configure it directly. Do you want to continue?
INFO_REPLICATION_CONFIRM_INITIALIZE_GENERIC=Initializing the contents of a \
base DN removes all the existing contents of that base DN. Do you want to \
remove the contents of the selected base DNs on server %s and replace them \
with the contents of server %s?
MILD_ERR_REPLICATION_READING_REGISTERED_SERVERS_WARNING=The following errors \
were encountered reading the configuration of the existing servers:\n%s\nThe \
replication tool will to try to update the configuration of all the servers \
in a best-effort mode. However it cannot guarantee that the servers that are \
generating errors will be updated.
INFO_REPLICATION_CONNECTING=Establishing connections
INFO_REPLICATION_ENABLE_UPDATING_ADS_CONTENTS=Checking Registration information
INFO_REPLICATION_ENABLE_CONFIGURING_REPLICATION_SERVER=Configuring Replication \
port on server %s
INFO_REPLICATION_ENABLE_CONFIGURING_BASEDN=Enabling Replication for baseDN %s \
on server %s
INFO_ENABLE_REPLICATION_INITIALIZING_ADS=Initializing Registration information \
on server %s with the contents of server %s
SEVERE_ERR_INITIALIZING_REPLICATIONID_NOT_FOUND=Error initializing. Could not \
find replication ID in the server %s for base DN %s.
SEVERE_ERR_REPLICATION_INITIALIZING_TRIES_COMPLETED=Error initializing. Could \
not find a peer to start the initialization after several tries. Details: %s
SEVERE_ERR_REPLICATION_CONFIGURING_REPLICATIONSERVER=Error configuring \
replication port on server %s.
SEVERE_ERR_REPLICATION_CONFIGURING_BASEDN=Error updating replication \
configuration on base DN %s of server %s.
SEVERE_ERR_REPLICATION_UPDATING_ADS=Error updating Registration information. \
Details: %s
SEVERE_ERR_REPLICATION_READING_ADS=Error reading Registration information. \
Details: %s
SEVERE_ERR_REPLICATION_ADS_MERGE_NOT_SUPPORTED=The registry information found \
in servers %s and %s is different. This tool does not allow to handle this \
scenario.
SEVERE_ERR_REPLICATION_ERROR_READING_CONFIGURATION=Error reading replication \
configuration of server %s. Details: %s
INFO_REPLICATION_REMOVING_REFERENCES_ON_REMOTE=Removing references on base DN \
%s of server %s
INFO_REPLICATION_DISABLING_BASEDN=Disabling replication on base DN %s of \
server %s