clu_manage-tasks_checkbehavior.xml revision 4618
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!--
! CDDL HEADER START
!
! The contents of this file are subject to the terms of the
! Common Development and Distribution License, Version 1.0 only
! (the "License"). You may not use this file except in compliance
! with the License.
!
! You can obtain a copy of the license at
! See the License for the specific language governing permissions
! and limitations under the License.
!
! When distributing Covered Code, exclude this CDDL HEADER in each
! file and exclude the License file at
! trunk/opends/resource/legal-notices/OpenDS.LICENSE. If applicable,
! add the following below this CDDL HEADER, with the fields enclosed
! by brackets "[]" replaced with your own identifying information:
! Portions Copyright [yyyy] [name of copyright owner]
!
! CDDL HEADER END
!
! Copyright 2008-2009 Sun Microsystems, Inc.
! -->
<stax>
<defaultcall function="clu_manage-tasks_checkbehavior"/>
<function name="clu_manage-tasks_checkbehavior">
<sequence>
<block name="'clu_manage-tasks_checkbehavior'">
<try>
<sequence>
<!--- Test Suite information
#@TestSuiteName manage-tasks check behavior tests
#@TestSuitePurpose Test the results of the manage-tasks command.
#@TestSuiteGroup manage-tasks check behavior tests
#@TestScript clu_manage-tasks_checkbehavior.xml
-->
<script>
if not CurrentTestPath.has_key('group'):
CurrentTestPath['group'] = 'clu'
CurrentTestPath['suite'] = STAXCurrentBlock
</script>
<call function="'testSuite_Preamble'"/>
<call function="'common_setup'">
{
'quickStart' : False ,
'loadData' : True ,
'startServer' : True ,
'stopServer' : False ,
'allowPreEncodePassword' : True
}
</call>
<!--- Define default value for template -->
<script>
</script>
<!--- Test Case information
#@TestMarker manage-tasks check behavior tests
#@TestName manage-tasks: summary of tasks
#@TestIssue none
#@TestPurpose Test manage-tasks with summary option
#@TestPreamble none
#@TestStep Do an manage-tasks with -s option.
#@TestStep Check that task 125 and 126 are displayed.
#@TestPostamble none
#@TestResult Success if manage-tasks returns 0 and if the
output is correct.
-->
<testcase name="getTestCaseName
('manage-tasks: get summary of tasks')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'manage-tasks: create two tasks with taskID 125 and 126'
</message>
<call function="'ldapModifyWithScript'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstancePort' : DIRECTORY_INSTANCE_PORT ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsAdd' : 'True' ,
'dsFilename' : task
}
</call>
<message>
'manage-tasks: check that these tasks appear in the summary'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsSummary' : 'True' ,
'dsQuiet' : 'True'
}
</call>
<script>
returnString = STAXResult[0][1]
msg1 = '125 Disconnect Client Completed with errors'
msg2 = '126 Disconnect Client Waiting on start time'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg1
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg2
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker manage-tasks check behavior tests
#@TestName manage-tasks: info option
#@TestIssue none
#@TestPurpose Test manage-tasks with info option
#@TestPreamble none
#@TestStep Do an manage-tasks with -i option on task 125.
#@TestStep Check some information for task 125.
#@TestStep Do an manage-tasks with -i option on task 126.
#@TestStep Check some information for task 126.
#@TestPostamble none
#@TestResult Success if manage-tasks returns 0 and if the
outputs are correct.
-->
<testcase name="getTestCaseName
('manage-tasks: get task information')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'manage-tasks: get information for task 125'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsInfo' : 125 ,
'dsQuiet' : 'True'
}
</call>
<script>
returnString = STAXResult[0][1]
msg1 = 'ID 125'
msg2 = 'Type Disconnect Client'
msg3 = 'Status Completed with errors'
msg4 = 'Scheduled Start Time Immediate execution'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg1
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg2
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg3
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg4
}
</call>
<message>
'manage-tasks: get information for task 126'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsInfo' : 126 ,
'dsQuiet' : 'True'
}
</call>
<script>
returnString = STAXResult[0][1]
msg1 = 'ID 126'
msg2 = 'Type Disconnect Client'
msg3 = 'Status Waiting on start time'
msg4 = 'Scheduled Start Time Dec 12, 2048 12:00:00 AM'
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg1
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg2
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg3
}
</call>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : msg4
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker manage-tasks check behavior tests
#@TestName manage-tasks: cancel option
#@TestIssue none
#@TestPurpose Test manage-tasks with cancel option
with seed 0
#@TestPreamble none
#@TestStep Do an manage-tasks with -c option on task 125.
#@TestStep Check the output of the previous command.
#@TestStep Do an manage-tasks with -c option on task 126.
#@TestStep Check the output of the previous command.
#@TestPostamble none
#@TestResult Success if manage-tasks return 1 for task 125,
0 for task 126 and if the outputs are correct.
-->
<testcase name="getTestCaseName('manage-tasks: cancel task')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'manage-tasks: cancel the task 125'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsCancel' : 125 ,
'dsQuiet' : 'True' ,
'expectedRC' : 1
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'task 125 is not in a cancelable state'
}
</call>
<message>
'manage-tasks: cancel the task 126'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsCancel' : 126 ,
'dsQuiet' : 'True'
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : 'Task 126 canceled'
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
<!--- Test Case information
#@TestMarker manage-tasks check behavior tests
#@TestName manage-tasks: invalid task
#@TestIssue none
#@TestPurpose Test manage-tasks with an invalid task
#@TestPreamble none
#@TestStep Do an manage-tasks with -c option and an
invalid task.
#@TestStep Check the output of the previous command.
#@TestStep Do an manage-tasks with -i option and an
invalid task.
#@TestStep Check the output of the previous command.
#@TestPostamble none
#@TestResult Success if manage-tasks return 1 and if
the outputs are correct.
-->
<testcase name="getTestCaseName('manage-tasks: invalid task')">
<sequence>
<call function="'testCase_Preamble'"/>
<message>
'manage-tasks: information for an invalid task'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsCancel' : 124 ,
'dsQuiet' : 'True' ,
'expectedRC' : 1
}
</call>
<script>
returnString = STAXResult[0][1]
msg1 = 'Error canceling task \'124\': There are no tasks'
msg2 = 'defined with ID \'124\''
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : '%s %s' % (msg1, msg2)
}
</call>
<message>
'manage-tasks: information on an invalid task'
</message>
<call function="'manage-tasks'">
{
'dsInstanceHost' : DIRECTORY_INSTANCE_HOST ,
'dsInstanceDn' : DIRECTORY_INSTANCE_DN ,
'dsInstancePswd' : DIRECTORY_INSTANCE_PSWD ,
'dsCancel' : 124 ,
'dsQuiet' : 'True' ,
'expectedRC' : 1
}
</call>
<script>
returnString = STAXResult[0][1]
</script>
<call function="'checktestString'">
{
'returnString' : returnString ,
'expectedString' : '%s %s' % (msg1, msg2)
}
</call>
<call function="'testCase_Postamble'"/>
</sequence>
</testcase>
</sequence>
<finally>
<sequence>
<!-- Test Suite Cleanup -->
<message>'Finally: Global CLU Cleanup.'</message>
<try>
<call function="'common_cleanup'" />
<catch exception="'STAFException'">
<sequence>
<message log="1" level="'fatal'">'Cleanup of test suite failed.'</message>
</sequence>
</catch>
<finally>
<call function="'testSuite_Postamble'"/>
</finally>
</try>
</sequence>
</finally>
</try>
</block>
</sequence>
</function>
</stax>