configure revision f620c5e527746a2ec3d90a11d21abd8a114746df
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.53.
#
# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
else
as_expr=false
fi
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
# Be Bourne compatible
NULLCMD=:
set -o posix
fi
# NLS nuisances.
# Support unset when possible.
as_unset=unset
else
as_unset=false
fi
{ LC_COLLATE=C; export LC_COLLATE; }
{ LC_NUMERIC=C; export LC_NUMERIC; }
{ LC_MESSAGES=C; export LC_MESSAGES; }
# Name of the executable.
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
/^X\/\(\/\/\)$/{ s//\1/; q; }
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_digits='0123456789'
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conftest.sh
echo "exit 0" >>conftest.sh
chmod +x conftest.sh
PATH_SEPARATOR=';'
else
fi
rm -f conftest.sh
fi
test "x$as_lineno_1" != "x$as_lineno_2" &&
# Find who we are. Look in the path if we contain no path at all
# relative or not.
case $0 in
*[\\/]* ) as_myself=$0 ;;
do
done
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
as_myself=$0
fi
{ (exit 1); exit 1; }; }
fi
case $CONFIG_SHELL in
'')
do
/*)
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
export CONFIG_SHELL
fi;;
esac
done
done
;;
esac
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line before each line; the second 'sed' does the real
# work. The second script uses 'N' to pair each line-number line
# with the numbered line, and appends trailing '-' during
# substitution so that $LINENO is not a special case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
sed '
N
s,$,-,
: loop
t loop
s,-$,,
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensible to this).
# Exit status is that of the last command.
exit
}
esac
else
as_expr=false
fi
# We could just check for DJGPP; but this test a) works b) is more generic
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
# Don't use ln at all; we don't have any links
as_ln_s='cp -p'
else
as_ln_s='ln -s'
fi
else
as_ln_s='cp -p'
fi
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
# CDPATH.
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
exec 6>&1
#
# Initializations.
#
# Maximum number of lines to put in a shell here document.
# This variable seems obsolete. It should probably be removed, and
# only ac_max_sed_lines should be used.
: ${ac_max_here_lines=38}
# Identity of this package.
# Initialize some variables set by options.
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
program_transform_name=s,x,x,
site=
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
continue
fi
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_option in
bindir=$ac_optarg ;;
| --da=*)
# Reject names that are not valid shell variable names.
{ (exit 1); exit 1; }; }
eval "enable_$ac_feature=no" ;;
# Reject names that are not valid shell variable names.
{ (exit 1); exit 1; }; }
case $ac_option in
esac
eval "enable_$ac_feature='$ac_optarg'" ;;
# Obsolete; use --with-gas.
ac_init_help=long ;;
libdir=$ac_optarg ;;
mandir=$ac_optarg ;;
# Obsolete; use --without-fp.
no_recursion=yes ;;
prefix=$ac_optarg ;;
site=$ac_optarg ;;
srcdir=$ac_optarg ;;
ac_init_version=: ;;
# Reject names that are not valid shell variable names.
{ (exit 1); exit 1; }; }
case $ac_option in
esac
eval "with_$ac_package='$ac_optarg'" ;;
# Reject names that are not valid shell variable names.
{ (exit 1); exit 1; }; }
eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
-*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
*=*)
# Reject names that are not valid shell variable names.
{ (exit 1); exit 1; }; }
eval "$ac_envvar='$ac_optarg'"
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
echo "$as_me: WARNING: you should use --build, --host, --target" >&2
echo "$as_me: WARNING: invalid host type: $ac_option" >&2
;;
esac
done
if test -n "$ac_prev"; then
{ (exit 1); exit 1; }; }
fi
# Be sure to have absolute paths.
do
[\\/$]* | ?:[\\/]* | NONE | '' ) ;;
{ (exit 1); exit 1; }; };;
esac
done
# Be sure to have absolute paths.
do
[\\/$]* | ?:[\\/]* ) ;;
{ (exit 1); exit 1; }; };;
esac
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
# FIXME: To remove some day.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
fi
fi
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
# Try the directory containing this script, then its parent.
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| \
echo X"$0" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ (exit 1); exit 1; }; }
else
{ (exit 1); exit 1; }; }
fi
fi
ac_env_host_alias_set=${host_alias+set}
ac_env_CC_set=${CC+set}
ac_cv_env_CC_set=${CC+set}
ac_env_CFLAGS_set=${CFLAGS+set}
ac_cv_env_CFLAGS_set=${CFLAGS+set}
ac_env_LDFLAGS_set=${LDFLAGS+set}
ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
ac_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
cat <<_ACEOF
\`configure' configures this package to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
_ACEOF
cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--infodir=DIR info documentation [PREFIX/info]
--mandir=DIR man documentation [PREFIX/man]
_ACEOF
fi
if test -n "$ac_init_help"; then
_ACEOF
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
ac_popdir=`pwd`
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
test -d $ac_dir || continue
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# absolute.
cd $ac_dir
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_srcdir/configure.gnu; then
echo
elif test -f $ac_srcdir/configure; then
echo
elif test -f $ac_srcdir/configure.ac ||
test -f $ac_srcdir/configure.in; then
echo
else
fi
cd $ac_popdir
done
fi
if $ac_init_version; then
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
exit 0
fi
exec 5>config.log
cat >&5 <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
generated by GNU Autoconf 2.53. Invocation command line was
$ $0 $@
_ACEOF
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
_ASUNAME
do
echo "PATH: $as_dir"
done
} >&5
cat >&5 <<_ACEOF
## ----------- ##
## Core tests. ##
## ----------- ##
_ACEOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell meta-characters.
for ac_arg
do
continue ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
esac
esac
# Get rid of the leading space.
done
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Be sure not to use single quotes in there, as some shells,
# such as our DU 5.0 friend, will then `close' the trap.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
echo
cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
## ---------------- ##
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
{
(set) 2>&1 |
case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
*ac_space=\ *)
sed -n \
"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
;;
*)
sed -n \
;;
esac;
}
echo
if test -s confdefs.h; then
cat <<\_ASBOX
## ----------- ##
## confdefs.h. ##
## ----------- ##
_ASBOX
echo
echo
fi
} >&5
rm -f core core.* *.core &&
rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
_ACEOF
cat >>confdefs.h <<_ACEOF
_ACEOF
cat >>confdefs.h <<_ACEOF
_ACEOF
cat >>confdefs.h <<_ACEOF
_ACEOF
cat >>confdefs.h <<_ACEOF
_ACEOF
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
else
fi
fi
for ac_site_file in $CONFIG_SITE; do
fi
done
# files actually), so we avoid doing that.
case $cache_file in
[\\/]* | ?:[\\/]* ) . $cache_file;;
*) . ./$cache_file;;
esac
fi
else
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
case $ac_old_set,$ac_new_set in
set,)
ac_cache_corrupted=: ;;
,set)
ac_cache_corrupted=: ;;
,);;
*)
ac_cache_corrupted=:
fi;;
esac
# Pass precious variables to config.status.
case $ac_new_val in
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
*) ac_arg=$ac_var=$ac_new_val ;;
esac
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
esac
fi
done
if $ac_cache_corrupted; then
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_ext=c
ac_compiler_gnu=$ac_cv_c_compiler_gnu
set dummy ${ac_tool_prefix}gcc; ac_word=$2
else
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
break 2
fi
done
done
fi
fi
else
fi
fi
ac_ct_CC=$CC
set dummy gcc; ac_word=$2
else
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
break 2
fi
done
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
else
fi
CC=$ac_ct_CC
else
fi
set dummy ${ac_tool_prefix}cc; ac_word=$2
else
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
break 2
fi
done
done
fi
fi
else
fi
fi
ac_ct_CC=$CC
set dummy cc; ac_word=$2
else
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
break 2
fi
done
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
else
fi
CC=$ac_ct_CC
else
fi
fi
set dummy cc; ac_word=$2
else
else
ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
ac_prog_rejected=yes
continue
fi
break 2
fi
done
done
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
else
fi
fi
for ac_prog in cl
do
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
else
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
break 2
fi
done
done
fi
fi
else
fi
done
fi
ac_ct_CC=$CC
for ac_prog in cl
do
set dummy $ac_prog; ac_word=$2
else
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
for ac_exec_ext in '' $ac_executable_extensions; do
break 2
fi
done
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
else
fi
done
CC=$ac_ct_CC
fi
fi
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
ac_compiler=`set X $ac_compile; echo $2`
(eval $ac_compiler --version </dev/null >&5) 2>&5
ac_status=$?
(exit $ac_status); }
(eval $ac_compiler -v </dev/null >&5) 2>&5
ac_status=$?
(exit $ac_status); }
(eval $ac_compiler -V </dev/null >&5) 2>&5
ac_status=$?
(exit $ac_status); }
cat >conftest.$ac_ext <<_ACEOF
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
(eval $ac_link_default) 2>&5
ac_status=$?
(exit $ac_status); }; then
# Find the output, starting from the most likely. This scheme is
# not robust to junk in `.', hence go to wildcards (a.*) only as a last
# resort.
# Be careful to initialize this variable, since it used to be cached.
ac_cv_exeext=
case $ac_file in
*.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
a.out ) # We found the default executable, but exeext='' is most
# certainly right.
break;;
# FIXME: I believe we export ac_cv_exeext for Libtool --akim.
export ac_cv_exeext
break;;
* ) break;;
esac
done
else
cat conftest.$ac_ext >&5
{ (exit 77); exit 77; }; }
fi
ac_exeext=$ac_cv_exeext
# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if { ac_try='./$ac_file'
(eval $ac_try) 2>&5
ac_status=$?
(exit $ac_status); }; }; then
cross_compiling=no
else
cross_compiling=yes
else
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
fi
rm -f a.out a.exe conftest$ac_cv_exeext
ac_clean_files=$ac_clean_files_save
# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
(eval $ac_link) 2>&5
ac_status=$?
(exit $ac_status); }; then
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
export ac_cv_exeext
break;;
* ) break;;
esac
done
else
{ (exit 1); exit 1; }; }
fi
if test "${ac_cv_objext+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
;
return 0;
}
_ACEOF
ac_status=$?
break;;
esac
done
else
{ (exit 1); exit 1; }; }
fi
fi
if test "${ac_cv_c_compiler_gnu+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
else
fi
fi
ac_test_CFLAGS=${CFLAGS+set}
CFLAGS="-g"
if test "${ac_cv_prog_cc_g+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
else
fi
fi
elif test $ac_cv_prog_cc_g = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
CFLAGS="-O2"
else
fi
fi
# Some people use a C++ compiler to compile C. Since we use `exit',
# in C++ we need to declare it. In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
# the declaration of exit, since it's the most demanding environment.
#ifndef __cplusplus
choke me
#endif
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
for ac_declaration in \
''\
'extern "C" void std::exit (int) throw (); using std::exit;' \
'extern "C" void std::exit (int); using std::exit;' \
'extern "C" void exit (int) throw ();' \
'extern "C" void exit (int);' \
'void exit (int);'
do
#line $LINENO "configure"
#include "confdefs.h"
#include <stdlib.h>
$ac_declaration
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
:
else
continue
fi
#line $LINENO "configure"
#include "confdefs.h"
$ac_declaration
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
break
else
fi
done
echo $ac_declaration >>confdefs.h
fi
else
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
if test "${ac_cv_search_res_mkquery+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char res_mkquery ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
res_mkquery ();
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
ac_cv_search_res_mkquery="none required"
else
fi
#line $LINENO "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char res_mkquery ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
res_mkquery ();
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
break
else
fi
done
fi
fi
fi
if test "${ac_cv_lib_socket_socket+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char socket ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
socket ();
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
else
fi
fi
if test $ac_cv_lib_socket_socket = yes; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBSOCKET 1
_ACEOF
fi
if test "${ac_cv_lib_nsl_inet_ntoa+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char inet_ntoa ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
inet_ntoa ();
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
else
fi
fi
if test $ac_cv_lib_nsl_inet_ntoa = yes; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBNSL 1
_ACEOF
fi
for ac_func in gethostbyname2
do
else
#line $LINENO "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func ();
char (*f) ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
f = $ac_func;
#endif
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
eval "$as_ac_var=yes"
else
eval "$as_ac_var=no"
fi
fi
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
fi
done
if test "${ac_cv_func_getaddrinfo+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char getaddrinfo (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char getaddrinfo ();
char (*f) ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_getaddrinfo) || defined (__stub___getaddrinfo)
choke me
#else
f = getaddrinfo;
#endif
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
else
fi
fi
if test $ac_cv_func_getaddrinfo = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_GETADDRINFO 1
else
LIBOBJS="$LIBOBJS getaddrinfo.$ac_objext"
fi
if test "${ac_cv_func_getnameinfo+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char getnameinfo (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char getnameinfo ();
char (*f) ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_getnameinfo) || defined (__stub___getnameinfo)
choke me
#else
f = getnameinfo;
#endif
;
return 0;
}
_ACEOF
ac_status=$?
ac_status=$?
else
fi
fi
if test $ac_cv_func_getnameinfo = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_GETNAMEINFO 1
else
LIBOBJS="$LIBOBJS getnameinfo.$ac_objext"
fi
if test "${ac_cv_type_socklen_t+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
socklen_t len = 42; return len;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
else
fi
fi
if test $ac_cv_type_socklen_t != yes; then
cat >>confdefs.h <<\_ACEOF
#define socklen_t int
fi
if test "${ac_cv_sa_len+set}" = set; then
else
#line $LINENO "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
struct sockaddr sa; sa.sa_len = 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
ac_status=$?
ac_status=$?
else
fi
fi
if test $ac_cv_sa_len = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_SA_LEN 1
fi
ac_config_files="$ac_config_files Makefile"
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overriden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
(set) 2>&1 |
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n \
"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
esac;
} |
sed '
t clear
: clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
/^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
: end' >>confcache
if cmp -s $cache_file confcache; then :; else
if test -w $cache_file; then
else
echo "not updating unwritable cache $cache_file"
fi
fi
# Let make expand exec_prefix.
# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
ac_vpsub='/^[ ]*VPATH[ ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[ ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[ ]*$//;
}'
fi
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
# take arguments), then we branch to the quote section. Otherwise,
# look for a macro that doesn't take arguments.
cat >confdef2opt.sed <<\_ACEOF
t clear
: clear
s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
t quote
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
t quote
d
: quote
s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
s,\[,\\&,g
s,\],\\&,g
s,\$,$$,g
p
# We use echo to avoid assuming a particular line-breaking character.
# The extra dot is to prevent the shell from consuming trailing
# line-breaks from the sub-command output. A line-break within
# single-quotes doesn't work because, if this script is created in a
# platform that uses two characters for line-breaks (e.g., DOS), tr
# would break.
ac_LF_and_DOT=`echo; echo .`
: ${CONFIG_STATUS=./config.status}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
# Be Bourne compatible
NULLCMD=:
set -o posix
fi
# NLS nuisances.
# Support unset when possible.
as_unset=unset
else
as_unset=false
fi
{ LC_COLLATE=C; export LC_COLLATE; }
{ LC_NUMERIC=C; export LC_NUMERIC; }
{ LC_MESSAGES=C; export LC_MESSAGES; }
# Name of the executable.
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)$' \| \
echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
/^X\/\(\/\/\)$/{ s//\1/; q; }
/^X\/\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_digits='0123456789'
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
chmod +x conftest.sh
PATH_SEPARATOR=';'
else
fi
rm -f conftest.sh
fi
# Find who we are. Look in the path if we contain no path at all
# relative or not.
case $0 in
*[\\/]* ) as_myself=$0 ;;
do
done
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
as_myself=$0
fi
{ (exit 1); exit 1; }; }
fi
case $CONFIG_SHELL in
'')
do
/*)
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
export CONFIG_SHELL
fi;;
esac
done
done
;;
esac
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line before each line; the second 'sed' does the real
# work. The second script uses 'N' to pair each line-number line
# with the numbered line, and appends trailing '-' during
# substitution so that $LINENO is not a special case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
sed '
N
s,$,-,
: loop
t loop
s,-$,,
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensible to this).
# Exit status is that of the last command.
exit
}
esac
else
as_expr=false
fi
# We could just check for DJGPP; but this test a) works b) is more generic
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
# Don't use ln at all; we don't have any links
as_ln_s='cp -p'
else
as_ln_s='ln -s'
fi
else
as_ln_s='cp -p'
fi
as_executable_p="test -f"
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
# CDPATH.
exec 6>&1
# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling. Logging --version etc. is OK.
exec 5>>config.log
{
echo
## Running $as_me. ##
_ASBOX
} >&5
cat >&5 <<_CSEOF
This file was extended by $as_me, which was
generated by GNU Autoconf 2.53. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
_CSEOF
echo >&5
# Files that config.status was made for.
fi
fi
fi
fi
cat >>$CONFIG_STATUS <<\_ACEOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
-V, --version print version number, then exit
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
Configuration files:
Report bugs to <bug-autoconf@gnu.org>."
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.53,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value. By we need to know if files were specified by the user.
while test $# != 0
do
case $1 in
--*=*)
shift
shift
;;
-*);;
*) # This is not an option, so the user has probably given explicit
# arguments.
ac_need_defaults=false;;
esac
case $1 in
# Handling of the options.
cat >>$CONFIG_STATUS <<_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
--he | --h)
# Conflict between --help and --header
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; };;
--debug | --d* | -d )
debug=: ;;
shift
ac_need_defaults=false;;
shift
ac_need_defaults=false;;
# This is an error.
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; } ;;
esac
shift
done
cat >>$CONFIG_STATUS <<\_ACEOF
do
# Handling of arguments.
{ (exit 1); exit 1; }; };;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
fi
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
} ||
{
} ||
{
{ (exit 1); exit 1; }
}
cat >>$CONFIG_STATUS <<_ACEOF
#
# CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "\$CONFIG_FILES"; then
# Protect against being on the right side of a sed subst in config.status.
sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
s,@SHELL@,$SHELL,;t t
s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
s,@exec_prefix@,$exec_prefix,;t t
s,@prefix@,$prefix,;t t
s,@program_transform_name@,$program_transform_name,;t t
s,@bindir@,$bindir,;t t
s,@sbindir@,$sbindir,;t t
s,@libexecdir@,$libexecdir,;t t
s,@datadir@,$datadir,;t t
s,@sysconfdir@,$sysconfdir,;t t
s,@sharedstatedir@,$sharedstatedir,;t t
s,@localstatedir@,$localstatedir,;t t
s,@libdir@,$libdir,;t t
s,@includedir@,$includedir,;t t
s,@oldincludedir@,$oldincludedir,;t t
s,@infodir@,$infodir,;t t
s,@mandir@,$mandir,;t t
s,@build_alias@,$build_alias,;t t
s,@host_alias@,$host_alias,;t t
s,@target_alias@,$target_alias,;t t
s,@DEFS@,$DEFS,;t t
s,@ECHO_C@,$ECHO_C,;t t
s,@ECHO_N@,$ECHO_N,;t t
s,@ECHO_T@,$ECHO_T,;t t
s,@LIBS@,$LIBS,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t
s,@CPPFLAGS@,$CPPFLAGS,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
CEOF
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_sed_frag=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_lines # Line after last line for current file.
while $ac_more_lines; do
else
fi
ac_more_lines=false
else
# The purpose of the label and of the branching condition is to
# speed up the sed processing (if there are no `@' at all, there
# is no need to browse any of the substitutions).
# These are the two extra sed commands mentioned above.
(echo ':t
ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
else
ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
fi
fi
done
fi
fi # test -n "$CONFIG_FILES"
cat >>$CONFIG_STATUS <<\_ACEOF
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- | *:- | *:-:* ) # input from stdin
* ) ac_file_in=$ac_file.in ;;
esac
# Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
[\\/]* | ?:[\\/]* ) as_incr_dir=;;
*) as_incr_dir=.;;
esac
case $as_mkdir_dir in
# Skip DOS drivespec
?:) as_incr_dir=$as_mkdir_dir ;;
*)
as_incr_dir=$as_incr_dir/$as_mkdir_dir
test -d "$as_incr_dir" ||
mkdir "$as_incr_dir" ||
{ { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }
;;
esac
done; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# absolute.
fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
else
fi
# First look for the input files in the build tree, otherwise in the
# src tree.
for f in $ac_file_in; do
case $f in
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
{ (exit 1); exit 1; }; }
echo $f;;
*) # Relative
if test -f "$f"; then
# Build tree
echo $f
# Source tree
echo $srcdir/$f
else
{ (exit 1); exit 1; }; }
fi;;
esac
done` || { (exit 1); exit 1; }
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
rm -f $tmp/stdin
else
cat $tmp/out
rm -f $tmp/out
fi
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
ac_cs_success=:
$SHELL $CONFIG_STATUS || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi