tests.sh revision 41f11644387cf54e4affe496c0532165ac41eb87
#
# Copyright (C) 2010, 2012 Internet Systems Consortium, Inc. ("ISC")
#
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
# $Id: tests.sh,v 1.4 2012/01/31 23:47:31 tbox Exp $
status=0
n=0
DIGOPTS="+tcp +noadd +nosea +nostat +nocmd -p 5300"
do
n=`expr $n + 1`
echo "I:checking that $conf is accepted ($n)"
ret=0
done
do
n=`expr $n + 1`
echo "I:checking that $conf is rejected ($n)"
ret=0
done
#
# Authoritative tests against:
# filter-aaaa-on-v4 yes;
# filter-aaaa { 10.53.0.1; };
#
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, signed ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, unsigned ($n)"
ret=0
n=`expr $n + 1`
ret=0
n=`expr $n + 1`
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A records exist, signed and DO set ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned and DO set ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A records exist and query source does not match acl ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, signed and qtype=ANY ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned and qtype=ANY ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that both A and AAAA are returned when both AAAA and A records exist, signed, qtype=ANY and DO is set ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned, qtype=ANY and DO is set ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that both A and AAAA are returned when both AAAA and A records exist, qtype=ANY and query source does not match acl ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A record exists, unsigned over IPv6 ($n)"
then
ret=0
$DIG $DIGOPTS aaaa dual.unsigned -b fd92:7065:b8e:ffff::1 @fd92:7065:b8e:ffff::1 > dig.out.ns1.test$n || ret=1
else
echo "I: skipped."
fi
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=NS ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=MX, unsigned ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is included in additional section, qtype=MX, signed ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is included in additional section, qtype=MX, unsigned, over IPV6 ($n)"
then
ret=0
$DIG $DIGOPTS +add +dnssec mx unsigned -b fd92:7065:b8e:ffff::1 @fd92:7065:b8e:ffff::1 > dig.out.ns1.test$n || ret=1
else
echo "I: skipped."
fi
#
# Authoritative tests against:
# filter-aaaa-on-v4 break-dnssec;
# filter-aaaa { 10.53.0.4; };
#
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, signed with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, unsigned with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, signed with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, signed and DO set with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned and DO set with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A records exist and query source does not match acl with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, signed and qtype=ANY with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned and qtype=ANY with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, signed, qtype=ANY and DO is set with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned, qtype=ANY and DO is set with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that both A and AAAA are returned when both AAAA and A records exist, qtype=ANY and query source does not match acl with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A record exists, unsigned over IPv6 with break-dnssec ($n)"
then
ret=0
$DIG $DIGOPTS aaaa dual.unsigned -b fd92:7065:b8e:ffff::4 @fd92:7065:b8e:ffff::4 > dig.out.ns4.test$n || ret=1
else
echo "I: skipped."
fi
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=NS, with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=MX, unsigned, with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=MX, signed, with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is included in additional section, qtype=MX, unsigned, over IPV6, with break-dnssec ($n)"
then
ret=0
$DIG $DIGOPTS +add +dnssec mx unsigned -b fd92:7065:b8e:ffff::4 @fd92:7065:b8e:ffff::4 > dig.out.ns4.test$n || ret=1
else
echo "I: skipped."
fi
#
# Recursive tests against:
# filter-aaaa-on-v4 yes;
# filter-aaaa { 10.53.0.2; };
#
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, signed, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, unsigned, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, signed, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A records exist, signed and DO set, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned and DO set, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A records exist and query source does not match acl, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, signed and qtype=ANY recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned and qtype=ANY recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that both A and AAAA are returned when both AAAA and A records exist, signed, qtype=ANY and DO is set, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned, qtype=ANY and DO is set, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that both A and AAAA are returned when both AAAA and A records exist, qtype=ANY and query source does not match acl, recursive ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A record exists, unsigned over IPv6, recursive ($n)"
then
ret=0
$DIG $DIGOPTS aaaa dual.unsigned -b fd92:7065:b8e:ffff::2 @fd92:7065:b8e:ffff::2 > dig.out.ns2.test$n || ret=1
else
echo "I: skipped."
fi
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=NS ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=MX, unsigned ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is included in additional section, qtype=MX, signed ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is included in additional section, qtype=MX, unsigned, over IPV6 ($n)"
then
ret=0
$DIG $DIGOPTS +add +dnssec mx unsigned -b fd92:7065:b8e:ffff::2 @fd92:7065:b8e:ffff::2 > dig.out.ns2.test$n || ret=1
else
echo "I: skipped."
fi
#
# Recursive tests against:
# filter-aaaa-on-v4 break-dnssec;
# filter-aaaa { 10.53.0.3; };
#
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, signed, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when only AAAA record exists, unsigned, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, signed, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, signed and DO set, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that NODATA/NOERROR is returned when both AAAA and A records exist, unsigned and DO set, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A records exist and query source does not match acl, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, signed and qtype=ANY with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned and qtype=ANY with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, signed, qtype=ANY and DO is set with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that A and not AAAA is returned when both AAAA and A records exist, unsigned, qtype=ANY and DO is set with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that both A and AAAA are returned when both AAAA and A records exist, qtype=ANY and query source does not match acl, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is returned when both AAAA and A record exists, unsigned over IPv6, recursive with break-dnssec ($n)"
then
ret=0
$DIG $DIGOPTS aaaa dual.unsigned -b fd92:7065:b8e:ffff::3 @fd92:7065:b8e:ffff::3 > dig.out.ns3.test$n || ret=1
else
echo "I: skipped."
fi
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=NS, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=MX, unsigned, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is omitted from additional section, qtype=MX, signed, recursive with break-dnssec ($n)"
ret=0
n=`expr $n + 1`
echo "I:checking that AAAA is included in additional section, qtype=MX, unsigned, over IPV6, recursive with break-dnssec ($n)"
then
ret=0
$DIG $DIGOPTS +add +dnssec mx unsigned -b fd92:7065:b8e:ffff::3 @fd92:7065:b8e:ffff::3 > dig.out.ns3.test$n || ret=1
else
echo "I: skipped."
fi
echo "I:exit status: $status"
exit $status