system/dnstap/tests.sh

	tests.sh revision 0c27b3fe77ac1d5094ba3521e8142d9e7973133f
#!/bin/sh
#
# Copyright (C) 2015, 2016  Internet Systems Consortium, Inc. ("ISC")
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.

SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh

RNDCCMD="$RNDC -p 9953 -c ../common/rndc.conf"

status=0

$DIG +short @10.53.0.3 -p 5300 a.example > dig.out

mv ns1/dnstap.out ns1/dnstap.out.save
mv ns2/dnstap.out ns2/dnstap.out.save
mv ns3/dnstap.out ns3/dnstap.out.save

sleep 2

$RNDCCMD -s 10.53.0.1 dnstap-reopen | sed 's/^/I:ns1 /'
$RNDCCMD -s 10.53.0.2 dnstap-reopen | sed 's/^/I:ns2 /'
$RNDCCMD -s 10.53.0.3 dnstap-reopen | sed 's/^/I:ns3 /'

$DIG +short @10.53.0.3 -p 5300 a.example > dig.out
sleep 1

# XXX: file output should be flushed once a second according
# to the libfstrm source, but it doesn't seem to happen until
# enough data has accumulated. to get all the output, we stop
# the name servers, forcing a flush on shutdown. it would be
# nice to find a better way to do this.
$RNDCCMD -s 10.53.0.1 stop | sed 's/^/I:ns1 /'
$RNDCCMD -s 10.53.0.2 stop | sed 's/^/I:ns2 /'
$RNDCCMD -s 10.53.0.3 stop | sed 's/^/I:ns3 /'
sleep 1

udp1=`$DNSTAPREAD ns1/dnstap.out.save | grep "UDP " | wc -l`
tcp1=`$DNSTAPREAD ns1/dnstap.out.save | grep "TCP " | wc -l`
aq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "AQ " | wc -l`
ar1=`$DNSTAPREAD ns1/dnstap.out.save | grep "AR " | wc -l`
cq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "CQ " | wc -l`
cr1=`$DNSTAPREAD ns1/dnstap.out.save | grep "CR " | wc -l`
rq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "RQ " | wc -l`
rr1=`$DNSTAPREAD ns1/dnstap.out.save | grep "RR " | wc -l`

udp2=`$DNSTAPREAD ns2/dnstap.out.save | grep "UDP " | wc -l`
tcp2=`$DNSTAPREAD ns2/dnstap.out.save | grep "TCP " | wc -l`
aq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "AQ " | wc -l`
ar2=`$DNSTAPREAD ns2/dnstap.out.save | grep "AR " | wc -l`
cq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "CQ " | wc -l`
cr2=`$DNSTAPREAD ns2/dnstap.out.save | grep "CR " | wc -l`
rq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "RQ " | wc -l`
rr2=`$DNSTAPREAD ns2/dnstap.out.save | grep "RR " | wc -l`

udp3=`$DNSTAPREAD ns3/dnstap.out.save | grep "UDP " | wc -l`
tcp3=`$DNSTAPREAD ns3/dnstap.out.save | grep "TCP " | wc -l`
aq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "AQ " | wc -l`
ar3=`$DNSTAPREAD ns3/dnstap.out.save | grep "AR " | wc -l`
cq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "CQ " | wc -l`
cr3=`$DNSTAPREAD ns3/dnstap.out.save | grep "CR " | wc -l`
rq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "RQ " | wc -l`
rr3=`$DNSTAPREAD ns3/dnstap.out.save | grep "RR " | wc -l`

echo "I:checking initial message counts"
echo "I: checking UDP message counts"
ret=0
[ $udp1 -eq 0 ] || {
        echo "ns1 $udp1 expected 0" ; ret=1
}
[ $udp2 -eq 2 ] || {
        echo "ns2 $udp2 expected 2" ; ret=1
}
[ $udp3 -eq 4 ] || {
        echo "ns3 $udp3 expected 4" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking TCP message counts"
ret=0
[ $tcp1 -eq 6 ] || {
        echo "ns1 $tcp1 expected 6" ; ret=1
}
[ $tcp2 -eq 2 ] || {
        echo "ns2 $tcp2 expected 2" ; ret=1
}
[ $tcp3 -eq 6 ] || {
        echo "ns3 $tcp3 expected 6" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking AUTH_QUERY message counts"
ret=0
[ $aq1 -eq 2 ] || {
        echo "ns1 $aq1 exepcted 2" ; ret=1
}
[ $aq2 -eq 1 ] || {
        echo "ns2 $aq2 expected 1" ; ret=1
}
[ $aq3 -eq 0 ] || {
        echo "ns3 $aq3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking AUTH_RESPONSE message counts"
ret=0
[ $ar1 -eq 2 ] || {
        echo "ns1 $ar1 expected 2" ; ret=1
}
[ $ar2 -eq 1 ] || {
        echo "ns2 $ar2 expected 1" ; ret=1
}
[ $ar3 -eq 0 ] || {
        echo "ns3 $ar3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking CLIENT_QUERY message counts"
ret=0
[ $cq1 -eq 1 ] || {
        echo "ns1 $cq1 expected 1" ; ret=1
}
[ $cq2 -eq 1 ] || {
        echo "ns2 $cq2 expected 1" ; ret=1
}
[ $cq3 -eq 2 ] || {
        echo "ns3 $cq3 expected 2" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking CLIENT_RESPONSE message counts"
ret=0
[ $cr1 -eq 1 ] || {
        echo "ns1 $cr1 expected 1" ; ret=1
}
[ $cr2 -eq 1 ] || {
        echo "ns2 $cr2 expected 1" ; ret=1
}
[ $cr3 -eq 2 ] || {
        echo "ns3 $cr3 expected 2" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking RESOLVER_QUERY message counts"
ret=0
[ $rq1 -eq 0 ] || {
        echo "ns1 $rq1 expected 0" ; ret=1
}
[ $rq2 -eq 0 ] || {
        echo "ns2 $rq2 expected 0" ; ret=1
}
[ $rq3 -eq 3 ] || {
        echo "ns3 $rq3 expected 3" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking RESOLVER_RESPONSE message counts"
ret=0
[ $rr1 -eq 0 ] || {
        echo "ns1 $rr1 expected 0" ; ret=1
}
[ $rr2 -eq 0 ] || {
        echo "ns2 $rr2 expected 0" ; ret=1
}
[ $rr3 -eq 3 ] || {
        echo "ns3 $rr3 expected 3" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

udp1=`$DNSTAPREAD ns1/dnstap.out | grep "UDP " | wc -l`
tcp1=`$DNSTAPREAD ns1/dnstap.out | grep "TCP " | wc -l`
aq1=`$DNSTAPREAD ns1/dnstap.out | grep "AQ " | wc -l`
ar1=`$DNSTAPREAD ns1/dnstap.out | grep "AR " | wc -l`
cq1=`$DNSTAPREAD ns1/dnstap.out | grep "CQ " | wc -l`
cr1=`$DNSTAPREAD ns1/dnstap.out | grep "CR " | wc -l`
rq1=`$DNSTAPREAD ns1/dnstap.out | grep "RQ " | wc -l`
rr1=`$DNSTAPREAD ns1/dnstap.out | grep "RR " | wc -l`

udp2=`$DNSTAPREAD ns2/dnstap.out | grep "UDP " | wc -l`
tcp2=`$DNSTAPREAD ns2/dnstap.out | grep "TCP " | wc -l`
aq2=`$DNSTAPREAD ns2/dnstap.out | grep "AQ " | wc -l`
ar2=`$DNSTAPREAD ns2/dnstap.out | grep "AR " | wc -l`
cq2=`$DNSTAPREAD ns2/dnstap.out | grep "CQ " | wc -l`
cr2=`$DNSTAPREAD ns2/dnstap.out | grep "CR " | wc -l`
rq2=`$DNSTAPREAD ns2/dnstap.out | grep "RQ " | wc -l`
rr2=`$DNSTAPREAD ns2/dnstap.out | grep "RR " | wc -l`

udp3=`$DNSTAPREAD ns3/dnstap.out | grep "UDP " | wc -l`
tcp3=`$DNSTAPREAD ns3/dnstap.out | grep "TCP " | wc -l`
aq3=`$DNSTAPREAD ns3/dnstap.out | grep "AQ " | wc -l`
ar3=`$DNSTAPREAD ns3/dnstap.out | grep "AR " | wc -l`
cq3=`$DNSTAPREAD ns3/dnstap.out | grep "CQ " | wc -l`
cr3=`$DNSTAPREAD ns3/dnstap.out | grep "CR " | wc -l`
rq3=`$DNSTAPREAD ns3/dnstap.out | grep "RQ " | wc -l`
rr3=`$DNSTAPREAD ns3/dnstap.out | grep "RR " | wc -l`

echo "I:checking reopened message counts"

echo "I: checking UDP message counts"
ret=0
[ $udp1 -eq 0 ] || {
        echo "ns1 $udp1 expected 0" ; ret=1
}
[ $udp2 -eq 0 ] || {
        echo "ns2 $udp2 expected 0" ; ret=1
}
[ $udp3 -eq 2 ] || {
        echo "ns3 $udp3 expected 2" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking TCP message counts"
ret=0
[ $tcp1 -eq 0 ] || {
        echo "ns1 $tcp1 expected 0" ; ret=1
}
[ $tcp2 -eq 0 ] || {
        echo "ns2 $tcp2 expected 0" ; ret=1
}
[ $tcp3 -eq 0 ] || {
        echo "ns3 $tcp3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking AUTH_QUERY message counts"
ret=0
[ $aq1 -eq 0 ] || {
        echo "ns1 $aq1 exepcted 0" ; ret=1
}
[ $aq2 -eq 0 ] || {
        echo "ns2 $aq2 expected 0" ; ret=1
}
[ $aq3 -eq 0 ] || {
        echo "ns3 $aq3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking AUTH_RESPONSE message counts"
ret=0
[ $ar1 -eq 0 ] || {
        echo "ns1 $ar1 expected 0" ; ret=1
}
[ $ar2 -eq 0 ] || {
        echo "ns2 $ar2 expected 0" ; ret=1
}
[ $ar3 -eq 0 ] || {
        echo "ns3 $ar3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking CLIENT_QUERY message counts"
ret=0
[ $cq1 -eq 0 ] || {
        echo "ns1 $cq1 expected 0" ; ret=1
}
[ $cq2 -eq 0 ] || {
        echo "ns2 $cq2 expected 0" ; ret=1
}
[ $cq3 -eq 1 ] || {
        echo "ns3 $cq3 expected 1" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking CLIENT_RESPONSE message counts"
ret=0
[ $cr1 -eq 0 ] || {
        echo "ns1 $cr1 expected 0" ; ret=1
}
[ $cr2 -eq 0 ] || {
        echo "ns2 $cr2 expected 0" ; ret=1
}
[ $cr3 -eq 1 ] || {
        echo "ns3 $cr3 expected 1" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking RESOLVER_QUERY message counts"
ret=0
[ $rq1 -eq 0 ] || {
        echo "ns1 $rq1 expected 0" ; ret=1
}
[ $rq2 -eq 0 ] || {
        echo "ns2 $rq2 expected 0" ; ret=1
}
[ $rq3 -eq 0 ] || {
        echo "ns3 $rq3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I: checking RESOLVER_RESPONSE message counts"
ret=0
[ $rr1 -eq 0 ] || {
        echo "ns1 $rr1 expected 0" ; ret=1
}
[ $rr2 -eq 0 ] || {
        echo "ns2 $rr2 expected 0" ; ret=1
}
[ $rr3 -eq 0 ] || {
        echo "ns3 $rr3 expected 0" ; ret=1
}
if [ $ret != 0 ]; then echo "I: failed"; fi
status=`expr $status + $ret`

echo "I:exit status: $status"
[ $status -eq 0 ] || exit 1