/* * Copyright (c) 1996, 2011, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. Oracle designates this * particular file as subject to the "Classpath" exception as provided * by Oracle in the LICENSE file that accompanied this code. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. */ /* * (C) Copyright Taligent, Inc. 1996 - All Rights Reserved * (C) Copyright IBM Corp. 1996 - All Rights Reserved * * The original version of this source code and documentation is copyrighted * and owned by Taligent, Inc., a wholly-owned subsidiary of IBM. These * materials are provided under terms of a License Agreement between Taligent * and Sun. This technology is protected by multiple US and International * patents. This notice and attribution to Taligent may not be removed. * Taligent is a registered trademark of Taligent, Inc. * */ package java.util; import java.io.ObjectInputStream; import java.io.ObjectOutputStream; import java.io.IOException; import sun.util.calendar.CalendarSystem; import sun.util.calendar.CalendarUtils; import sun.util.calendar.BaseCalendar; import sun.util.calendar.Gregorian; /** * SimpleTimeZone is a concrete subclass of TimeZone * that represents a time zone for use with a Gregorian calendar. * The class holds an offset from GMT, called raw offset, and start * and end rules for a daylight saving time schedule. Since it only holds * single values for each, it cannot handle historical changes in the offset * from GMT and the daylight saving schedule, except that the {@link * #setStartYear setStartYear} method can specify the year when the daylight * saving time schedule starts in effect. *

* To construct a SimpleTimeZone with a daylight saving time * schedule, the schedule can be described with a set of rules, * start-rule and end-rule. A day when daylight saving time * starts or ends is specified by a combination of month, * day-of-month, and day-of-week values. The month * value is represented by a Calendar {@link Calendar#MONTH MONTH} field * value, such as {@link Calendar#MARCH}. The day-of-week value is * represented by a Calendar {@link Calendar#DAY_OF_WEEK DAY_OF_WEEK} value, * such as {@link Calendar#SUNDAY SUNDAY}. The meanings of value combinations * are as follows. * *

* The time of the day at which daylight saving time starts or ends is * specified by a millisecond value within the day. There are three kinds of * modes to specify the time: {@link #WALL_TIME}, {@link * #STANDARD_TIME} and {@link #UTC_TIME}. For example, if daylight * saving time ends * at 2:00 am in the wall clock time, it can be specified by 7200000 * milliseconds in the {@link #WALL_TIME} mode. In this case, the wall clock time * for an end-rule means the same thing as the daylight time. *

* The following are examples of parameters for constructing time zone objects. *


 *      // Base GMT offset: -8:00
 *      // DST starts:      at 2:00am in standard time
 *      //                  on the first Sunday in April
 *      // DST ends:        at 2:00am in daylight time
 *      //                  on the last Sunday in October
 *      // Save:            1 hour
 *      SimpleTimeZone(-28800000,
 *                     "America/Los_Angeles",
 *                     Calendar.APRIL, 1, -Calendar.SUNDAY,
 *                     7200000,
 *                     Calendar.OCTOBER, -1, Calendar.SUNDAY,
 *                     7200000,
 *                     3600000)
 *
 *      // Base GMT offset: +1:00
 *      // DST starts:      at 1:00am in UTC time
 *      //                  on the last Sunday in March
 *      // DST ends:        at 1:00am in UTC time
 *      //                  on the last Sunday in October
 *      // Save:            1 hour
 *      SimpleTimeZone(3600000,
 *                     "Europe/Paris",
 *                     Calendar.MARCH, -1, Calendar.SUNDAY,
 *                     3600000, SimpleTimeZone.UTC_TIME,
 *                     Calendar.OCTOBER, -1, Calendar.SUNDAY,
 *                     3600000, SimpleTimeZone.UTC_TIME,
 *                     3600000)
 * 
* These parameter rules are also applicable to the set rule methods, such as * setStartRule. * * @since 1.1 * @see Calendar * @see GregorianCalendar * @see TimeZone * @author David Goldsmith, Mark Davis, Chen-Lieh Huang, Alan Liu */ public class SimpleTimeZone extends TimeZone { /** * Constructs a SimpleTimeZone with the given base time zone offset from GMT * and time zone ID with no daylight saving time schedule. * * @param rawOffset The base time zone offset in milliseconds to GMT. * @param ID The time zone name that is given to this instance. */ public SimpleTimeZone(int rawOffset, String ID) { this.rawOffset = rawOffset; setID (ID); dstSavings = millisPerHour; // In case user sets rules later } /** * Constructs a SimpleTimeZone with the given base time zone offset from * GMT, time zone ID, and rules for starting and ending the daylight * time. * Both startTime and endTime are specified to be * represented in the wall clock time. The amount of daylight saving is * assumed to be 3600000 milliseconds (i.e., one hour). This constructor is * equivalent to: *

     *     SimpleTimeZone(rawOffset,
     *                    ID,
     *                    startMonth,
     *                    startDay,
     *                    startDayOfWeek,
     *                    startTime,
     *                    SimpleTimeZone.{@link #WALL_TIME},
     *                    endMonth,
     *                    endDay,
     *                    endDayOfWeek,
     *                    endTime,
     *                    SimpleTimeZone.{@link #WALL_TIME},
     *                    3600000)
     * 
* * @param rawOffset The given base time zone offset from GMT. * @param ID The time zone ID which is given to this object. * @param startMonth The daylight saving time starting month. Month is * a {@link Calendar#MONTH MONTH} field value (0-based. e.g., 0 * for January). * @param startDay The day of the month on which the daylight saving time starts. * See the class description for the special cases of this parameter. * @param startDayOfWeek The daylight saving time starting day-of-week. * See the class description for the special cases of this parameter. * @param startTime The daylight saving time starting time in local wall clock * time (in milliseconds within the day), which is local * standard time in this case. * @param endMonth The daylight saving time ending month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 9 for October). * @param endDay The day of the month on which the daylight saving time ends. * See the class description for the special cases of this parameter. * @param endDayOfWeek The daylight saving time ending day-of-week. * See the class description for the special cases of this parameter. * @param endTime The daylight saving ending time in local wall clock time, * (in milliseconds within the day) which is local daylight * time in this case. * @exception IllegalArgumentException if the month, day, dayOfWeek, or time * parameters are out of range for the start or end rule */ public SimpleTimeZone(int rawOffset, String ID, int startMonth, int startDay, int startDayOfWeek, int startTime, int endMonth, int endDay, int endDayOfWeek, int endTime) { this(rawOffset, ID, startMonth, startDay, startDayOfWeek, startTime, WALL_TIME, endMonth, endDay, endDayOfWeek, endTime, WALL_TIME, millisPerHour); } /** * Constructs a SimpleTimeZone with the given base time zone offset from * GMT, time zone ID, and rules for starting and ending the daylight * time. * Both startTime and endTime are assumed to be * represented in the wall clock time. This constructor is equivalent to: *

     *     SimpleTimeZone(rawOffset,
     *                    ID,
     *                    startMonth,
     *                    startDay,
     *                    startDayOfWeek,
     *                    startTime,
     *                    SimpleTimeZone.{@link #WALL_TIME},
     *                    endMonth,
     *                    endDay,
     *                    endDayOfWeek,
     *                    endTime,
     *                    SimpleTimeZone.{@link #WALL_TIME},
     *                    dstSavings)
     * 
* * @param rawOffset The given base time zone offset from GMT. * @param ID The time zone ID which is given to this object. * @param startMonth The daylight saving time starting month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 0 for January). * @param startDay The day of the month on which the daylight saving time starts. * See the class description for the special cases of this parameter. * @param startDayOfWeek The daylight saving time starting day-of-week. * See the class description for the special cases of this parameter. * @param startTime The daylight saving time starting time in local wall clock * time, which is local standard time in this case. * @param endMonth The daylight saving time ending month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 9 for October). * @param endDay The day of the month on which the daylight saving time ends. * See the class description for the special cases of this parameter. * @param endDayOfWeek The daylight saving time ending day-of-week. * See the class description for the special cases of this parameter. * @param endTime The daylight saving ending time in local wall clock time, * which is local daylight time in this case. * @param dstSavings The amount of time in milliseconds saved during * daylight saving time. * @exception IllegalArgumentException if the month, day, dayOfWeek, or time * parameters are out of range for the start or end rule * @since 1.2 */ public SimpleTimeZone(int rawOffset, String ID, int startMonth, int startDay, int startDayOfWeek, int startTime, int endMonth, int endDay, int endDayOfWeek, int endTime, int dstSavings) { this(rawOffset, ID, startMonth, startDay, startDayOfWeek, startTime, WALL_TIME, endMonth, endDay, endDayOfWeek, endTime, WALL_TIME, dstSavings); } /** * Constructs a SimpleTimeZone with the given base time zone offset from * GMT, time zone ID, and rules for starting and ending the daylight * time. * This constructor takes the full set of the start and end rules * parameters, including modes of startTime and * endTime. The mode specifies either {@link #WALL_TIME wall * time} or {@link #STANDARD_TIME standard time} or {@link #UTC_TIME UTC * time}. * * @param rawOffset The given base time zone offset from GMT. * @param ID The time zone ID which is given to this object. * @param startMonth The daylight saving time starting month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 0 for January). * @param startDay The day of the month on which the daylight saving time starts. * See the class description for the special cases of this parameter. * @param startDayOfWeek The daylight saving time starting day-of-week. * See the class description for the special cases of this parameter. * @param startTime The daylight saving time starting time in the time mode * specified by startTimeMode. * @param startTimeMode The mode of the start time specified by startTime. * @param endMonth The daylight saving time ending month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 9 for October). * @param endDay The day of the month on which the daylight saving time ends. * See the class description for the special cases of this parameter. * @param endDayOfWeek The daylight saving time ending day-of-week. * See the class description for the special cases of this parameter. * @param endTime The daylight saving ending time in time time mode * specified by endTimeMode. * @param endTimeMode The mode of the end time specified by endTime * @param dstSavings The amount of time in milliseconds saved during * daylight saving time. * * @exception IllegalArgumentException if the month, day, dayOfWeek, time more, or * time parameters are out of range for the start or end rule, or if a time mode * value is invalid. * * @see #WALL_TIME * @see #STANDARD_TIME * @see #UTC_TIME * * @since 1.4 */ public SimpleTimeZone(int rawOffset, String ID, int startMonth, int startDay, int startDayOfWeek, int startTime, int startTimeMode, int endMonth, int endDay, int endDayOfWeek, int endTime, int endTimeMode, int dstSavings) { setID(ID); this.rawOffset = rawOffset; this.startMonth = startMonth; this.startDay = startDay; this.startDayOfWeek = startDayOfWeek; this.startTime = startTime; this.startTimeMode = startTimeMode; this.endMonth = endMonth; this.endDay = endDay; this.endDayOfWeek = endDayOfWeek; this.endTime = endTime; this.endTimeMode = endTimeMode; this.dstSavings = dstSavings; // this.useDaylight is set by decodeRules decodeRules(); if (dstSavings <= 0) { throw new IllegalArgumentException("Illegal daylight saving value: " + dstSavings); } } /** * Sets the daylight saving time starting year. * * @param year The daylight saving starting year. */ public void setStartYear(int year) { startYear = year; invalidateCache(); } /** * Sets the daylight saving time start rule. For example, if daylight saving * time starts on the first Sunday in April at 2 am in local wall clock * time, you can set the start rule by calling: *
setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2*60*60*1000);
* * @param startMonth The daylight saving time starting month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 0 for January). * @param startDay The day of the month on which the daylight saving time starts. * See the class description for the special cases of this parameter. * @param startDayOfWeek The daylight saving time starting day-of-week. * See the class description for the special cases of this parameter. * @param startTime The daylight saving time starting time in local wall clock * time, which is local standard time in this case. * @exception IllegalArgumentException if the startMonth, startDay, * startDayOfWeek, or startTime parameters are out of range */ public void setStartRule(int startMonth, int startDay, int startDayOfWeek, int startTime) { this.startMonth = startMonth; this.startDay = startDay; this.startDayOfWeek = startDayOfWeek; this.startTime = startTime; startTimeMode = WALL_TIME; decodeStartRule(); invalidateCache(); } /** * Sets the daylight saving time start rule to a fixed date within a month. * This method is equivalent to: *
setStartRule(startMonth, startDay, 0, startTime)
* * @param startMonth The daylight saving time starting month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 0 for January). * @param startDay The day of the month on which the daylight saving time starts. * @param startTime The daylight saving time starting time in local wall clock * time, which is local standard time in this case. * See the class description for the special cases of this parameter. * @exception IllegalArgumentException if the startMonth, * startDayOfMonth, or startTime parameters are out of range * @since 1.2 */ public void setStartRule(int startMonth, int startDay, int startTime) { setStartRule(startMonth, startDay, 0, startTime); } /** * Sets the daylight saving time start rule to a weekday before or after the given date within * a month, e.g., the first Monday on or after the 8th. * * @param startMonth The daylight saving time starting month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 0 for January). * @param startDay The day of the month on which the daylight saving time starts. * @param startDayOfWeek The daylight saving time starting day-of-week. * @param startTime The daylight saving time starting time in local wall clock * time, which is local standard time in this case. * @param after If true, this rule selects the first dayOfWeek on or * after dayOfMonth. If false, this rule * selects the last dayOfWeek on or before * dayOfMonth. * @exception IllegalArgumentException if the startMonth, startDay, * startDayOfWeek, or startTime parameters are out of range * @since 1.2 */ public void setStartRule(int startMonth, int startDay, int startDayOfWeek, int startTime, boolean after) { // TODO: this method doesn't check the initial values of dayOfMonth or dayOfWeek. if (after) { setStartRule(startMonth, startDay, -startDayOfWeek, startTime); } else { setStartRule(startMonth, -startDay, -startDayOfWeek, startTime); } } /** * Sets the daylight saving time end rule. For example, if daylight saving time * ends on the last Sunday in October at 2 am in wall clock time, * you can set the end rule by calling: * setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2*60*60*1000); * * @param endMonth The daylight saving time ending month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 9 for October). * @param endDay The day of the month on which the daylight saving time ends. * See the class description for the special cases of this parameter. * @param endDayOfWeek The daylight saving time ending day-of-week. * See the class description for the special cases of this parameter. * @param endTime The daylight saving ending time in local wall clock time, * (in milliseconds within the day) which is local daylight * time in this case. * @exception IllegalArgumentException if the endMonth, endDay, * endDayOfWeek, or endTime parameters are out of range */ public void setEndRule(int endMonth, int endDay, int endDayOfWeek, int endTime) { this.endMonth = endMonth; this.endDay = endDay; this.endDayOfWeek = endDayOfWeek; this.endTime = endTime; this.endTimeMode = WALL_TIME; decodeEndRule(); invalidateCache(); } /** * Sets the daylight saving time end rule to a fixed date within a month. * This method is equivalent to: *
setEndRule(endMonth, endDay, 0, endTime)
* * @param endMonth The daylight saving time ending month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 9 for October). * @param endDay The day of the month on which the daylight saving time ends. * @param endTime The daylight saving ending time in local wall clock time, * (in milliseconds within the day) which is local daylight * time in this case. * @exception IllegalArgumentException the endMonth, endDay, * or endTime parameters are out of range * @since 1.2 */ public void setEndRule(int endMonth, int endDay, int endTime) { setEndRule(endMonth, endDay, 0, endTime); } /** * Sets the daylight saving time end rule to a weekday before or after the given date within * a month, e.g., the first Monday on or after the 8th. * * @param endMonth The daylight saving time ending month. Month is * a {@link Calendar#MONTH MONTH} field * value (0-based. e.g., 9 for October). * @param endDay The day of the month on which the daylight saving time ends. * @param endDayOfWeek The daylight saving time ending day-of-week. * @param endTime The daylight saving ending time in local wall clock time, * (in milliseconds within the day) which is local daylight * time in this case. * @param after If true, this rule selects the first endDayOfWeek on * or after endDay. If false, this rule * selects the last endDayOfWeek on or before * endDay of the month. * @exception IllegalArgumentException the endMonth, endDay, * endDayOfWeek, or endTime parameters are out of range * @since 1.2 */ public void setEndRule(int endMonth, int endDay, int endDayOfWeek, int endTime, boolean after) { if (after) { setEndRule(endMonth, endDay, -endDayOfWeek, endTime); } else { setEndRule(endMonth, -endDay, -endDayOfWeek, endTime); } } /** * Returns the offset of this time zone from UTC at the given * time. If daylight saving time is in effect at the given time, * the offset value is adjusted with the amount of daylight * saving. * * @param date the time at which the time zone offset is found * @return the amount of time in milliseconds to add to UTC to get * local time. * @since 1.4 */ public int getOffset(long date) { return getOffsets(date, null); } /** * @see TimeZone#getOffsets */ int getOffsets(long date, int[] offsets) { int offset = rawOffset; computeOffset: if (useDaylight) { synchronized (this) { if (cacheStart != 0) { if (date >= cacheStart && date < cacheEnd) { offset += dstSavings; break computeOffset; } } } BaseCalendar cal = date >= GregorianCalendar.DEFAULT_GREGORIAN_CUTOVER ? gcal : (BaseCalendar) CalendarSystem.forName("julian"); BaseCalendar.Date cdate = (BaseCalendar.Date) cal.newCalendarDate(TimeZone.NO_TIMEZONE); // Get the year in local time cal.getCalendarDate(date + rawOffset, cdate); int year = cdate.getNormalizedYear(); if (year >= startYear) { // Clear time elements for the transition calculations cdate.setTimeOfDay(0, 0, 0, 0); offset = getOffset(cal, cdate, year, date); } } if (offsets != null) { offsets[0] = rawOffset; offsets[1] = offset - rawOffset; } return offset; } /** * Returns the difference in milliseconds between local time and * UTC, taking into account both the raw offset and the effect of * daylight saving, for the specified date and time. This method * assumes that the start and end month are distinct. It also * uses a default {@link GregorianCalendar} object as its * underlying calendar, such as for determining leap years. Do * not use the result of this method with a calendar other than a * default GregorianCalendar. * *

Note: In general, clients should use * Calendar.get(ZONE_OFFSET) + Calendar.get(DST_OFFSET) * instead of calling this method. * * @param era The era of the given date. * @param year The year in the given date. * @param month The month in the given date. Month is 0-based. e.g., * 0 for January. * @param day The day-in-month of the given date. * @param dayOfWeek The day-of-week of the given date. * @param millis The milliseconds in day in standard local time. * @return The milliseconds to add to UTC to get local time. * @exception IllegalArgumentException the era, * month, day, dayOfWeek, * or millis parameters are out of range */ public int getOffset(int era, int year, int month, int day, int dayOfWeek, int millis) { if (era != GregorianCalendar.AD && era != GregorianCalendar.BC) { throw new IllegalArgumentException("Illegal era " + era); } int y = year; if (era == GregorianCalendar.BC) { // adjust y with the GregorianCalendar-style year numbering. y = 1 - y; } // If the year isn't representable with the 64-bit long // integer in milliseconds, convert the year to an // equivalent year. This is required to pass some JCK test cases // which are actually useless though because the specified years // can't be supported by the Java time system. if (y >= 292278994) { y = 2800 + y % 2800; } else if (y <= -292269054) { // y %= 28 also produces an equivalent year, but positive // year numbers would be convenient to use the UNIX cal // command. y = (int) CalendarUtils.mod((long) y, 28); } // convert year to its 1-based month value int m = month + 1; // First, calculate time as a Gregorian date. BaseCalendar cal = gcal; BaseCalendar.Date cdate = (BaseCalendar.Date) cal.newCalendarDate(TimeZone.NO_TIMEZONE); cdate.setDate(y, m, day); long time = cal.getTime(cdate); // normalize cdate time += millis - rawOffset; // UTC time // If the time value represents a time before the default // Gregorian cutover, recalculate time using the Julian // calendar system. For the Julian calendar system, the // normalized year numbering is ..., -2 (BCE 2), -1 (BCE 1), // 1, 2 ... which is different from the GregorianCalendar // style year numbering (..., -1, 0 (BCE 1), 1, 2, ...). if (time < GregorianCalendar.DEFAULT_GREGORIAN_CUTOVER) { cal = (BaseCalendar) CalendarSystem.forName("julian"); cdate = (BaseCalendar.Date) cal.newCalendarDate(TimeZone.NO_TIMEZONE); cdate.setNormalizedDate(y, m, day); time = cal.getTime(cdate) + millis - rawOffset; } if ((cdate.getNormalizedYear() != y) || (cdate.getMonth() != m) || (cdate.getDayOfMonth() != day) // The validation should be cdate.getDayOfWeek() == // dayOfWeek. However, we don't check dayOfWeek for // compatibility. || (dayOfWeek < Calendar.SUNDAY || dayOfWeek > Calendar.SATURDAY) || (millis < 0 || millis >= (24*60*60*1000))) { throw new IllegalArgumentException(); } if (!useDaylight || year < startYear || era != GregorianCalendar.CE) { return rawOffset; } return getOffset(cal, cdate, y, time); } private int getOffset(BaseCalendar cal, BaseCalendar.Date cdate, int year, long time) { synchronized (this) { if (cacheStart != 0) { if (time >= cacheStart && time < cacheEnd) { return rawOffset + dstSavings; } if (year == cacheYear) { return rawOffset; } } } long start = getStart(cal, cdate, year); long end = getEnd(cal, cdate, year); int offset = rawOffset; if (start <= end) { if (time >= start && time < end) { offset += dstSavings; } synchronized (this) { cacheYear = year; cacheStart = start; cacheEnd = end; } } else { if (time < end) { // TODO: support Gregorian cutover. The previous year // may be in the other calendar system. start = getStart(cal, cdate, year - 1); if (time >= start) { offset += dstSavings; } } else if (time >= start) { // TODO: support Gregorian cutover. The next year // may be in the other calendar system. end = getEnd(cal, cdate, year + 1); if (time < end) { offset += dstSavings; } } if (start <= end) { synchronized (this) { // The start and end transitions are in multiple years. cacheYear = (long) startYear - 1; cacheStart = start; cacheEnd = end; } } } return offset; } private long getStart(BaseCalendar cal, BaseCalendar.Date cdate, int year) { int time = startTime; if (startTimeMode != UTC_TIME) { time -= rawOffset; } return getTransition(cal, cdate, startMode, year, startMonth, startDay, startDayOfWeek, time); } private long getEnd(BaseCalendar cal, BaseCalendar.Date cdate, int year) { int time = endTime; if (endTimeMode != UTC_TIME) { time -= rawOffset; } if (endTimeMode == WALL_TIME) { time -= dstSavings; } return getTransition(cal, cdate, endMode, year, endMonth, endDay, endDayOfWeek, time); } private long getTransition(BaseCalendar cal, BaseCalendar.Date cdate, int mode, int year, int month, int dayOfMonth, int dayOfWeek, int timeOfDay) { cdate.setNormalizedYear(year); cdate.setMonth(month + 1); switch (mode) { case DOM_MODE: cdate.setDayOfMonth(dayOfMonth); break; case DOW_IN_MONTH_MODE: cdate.setDayOfMonth(1); if (dayOfMonth < 0) { cdate.setDayOfMonth(cal.getMonthLength(cdate)); } cdate = (BaseCalendar.Date) cal.getNthDayOfWeek(dayOfMonth, dayOfWeek, cdate); break; case DOW_GE_DOM_MODE: cdate.setDayOfMonth(dayOfMonth); cdate = (BaseCalendar.Date) cal.getNthDayOfWeek(1, dayOfWeek, cdate); break; case DOW_LE_DOM_MODE: cdate.setDayOfMonth(dayOfMonth); cdate = (BaseCalendar.Date) cal.getNthDayOfWeek(-1, dayOfWeek, cdate); break; } return cal.getTime(cdate) + timeOfDay; } /** * Gets the GMT offset for this time zone. * @return the GMT offset value in milliseconds * @see #setRawOffset */ public int getRawOffset() { // The given date will be taken into account while // we have the historical time zone data in place. return rawOffset; } /** * Sets the base time zone offset to GMT. * This is the offset to add to UTC to get local time. * @see #getRawOffset */ public void setRawOffset(int offsetMillis) { this.rawOffset = offsetMillis; } /** * Sets the amount of time in milliseconds that the clock is advanced * during daylight saving time. * @param millisSavedDuringDST the number of milliseconds the time is * advanced with respect to standard time when the daylight saving time rules * are in effect. A positive number, typically one hour (3600000). * @see #getDSTSavings * @since 1.2 */ public void setDSTSavings(int millisSavedDuringDST) { if (millisSavedDuringDST <= 0) { throw new IllegalArgumentException("Illegal daylight saving value: " + millisSavedDuringDST); } dstSavings = millisSavedDuringDST; } /** * Returns the amount of time in milliseconds that the clock is * advanced during daylight saving time. * * @return the number of milliseconds the time is advanced with * respect to standard time when the daylight saving rules are in * effect, or 0 (zero) if this time zone doesn't observe daylight * saving time. * * @see #setDSTSavings * @since 1.2 */ public int getDSTSavings() { return useDaylight ? dstSavings : 0; } /** * Queries if this time zone uses daylight saving time. * @return true if this time zone uses daylight saving time; * false otherwise. */ public boolean useDaylightTime() { return useDaylight; } /** * Returns {@code true} if this {@code SimpleTimeZone} observes * Daylight Saving Time. This method is equivalent to {@link * #useDaylightTime()}. * * @return {@code true} if this {@code SimpleTimeZone} observes * Daylight Saving Time; {@code false} otherwise. * @since 1.7 */ @Override public boolean observesDaylightTime() { return useDaylightTime(); } /** * Queries if the given date is in daylight saving time. * @return true if daylight saving time is in effective at the * given date; false otherwise. */ public boolean inDaylightTime(Date date) { return (getOffset(date.getTime()) != rawOffset); } /** * Returns a clone of this SimpleTimeZone instance. * @return a clone of this instance. */ public Object clone() { return super.clone(); } /** * Generates the hash code for the SimpleDateFormat object. * @return the hash code for this object */ public synchronized int hashCode() { return startMonth ^ startDay ^ startDayOfWeek ^ startTime ^ endMonth ^ endDay ^ endDayOfWeek ^ endTime ^ rawOffset; } /** * Compares the equality of two SimpleTimeZone objects. * * @param obj The SimpleTimeZone object to be compared with. * @return True if the given obj is the same as this * SimpleTimeZone object; false otherwise. */ public boolean equals(Object obj) { if (this == obj) { return true; } if (!(obj instanceof SimpleTimeZone)) { return false; } SimpleTimeZone that = (SimpleTimeZone) obj; return getID().equals(that.getID()) && hasSameRules(that); } /** * Returns true if this zone has the same rules and offset as another zone. * @param other the TimeZone object to be compared with * @return true if the given zone is a SimpleTimeZone and has the * same rules and offset as this one * @since 1.2 */ public boolean hasSameRules(TimeZone other) { if (this == other) { return true; } if (!(other instanceof SimpleTimeZone)) { return false; } SimpleTimeZone that = (SimpleTimeZone) other; return rawOffset == that.rawOffset && useDaylight == that.useDaylight && (!useDaylight // Only check rules if using DST || (dstSavings == that.dstSavings && startMode == that.startMode && startMonth == that.startMonth && startDay == that.startDay && startDayOfWeek == that.startDayOfWeek && startTime == that.startTime && startTimeMode == that.startTimeMode && endMode == that.endMode && endMonth == that.endMonth && endDay == that.endDay && endDayOfWeek == that.endDayOfWeek && endTime == that.endTime && endTimeMode == that.endTimeMode && startYear == that.startYear)); } /** * Returns a string representation of this time zone. * @return a string representation of this time zone. */ public String toString() { return getClass().getName() + "[id=" + getID() + ",offset=" + rawOffset + ",dstSavings=" + dstSavings + ",useDaylight=" + useDaylight + ",startYear=" + startYear + ",startMode=" + startMode + ",startMonth=" + startMonth + ",startDay=" + startDay + ",startDayOfWeek=" + startDayOfWeek + ",startTime=" + startTime + ",startTimeMode=" + startTimeMode + ",endMode=" + endMode + ",endMonth=" + endMonth + ",endDay=" + endDay + ",endDayOfWeek=" + endDayOfWeek + ",endTime=" + endTime + ",endTimeMode=" + endTimeMode + ']'; } // =======================privates=============================== /** * The month in which daylight saving time starts. This value must be * between Calendar.JANUARY and * Calendar.DECEMBER inclusive. This value must not equal * endMonth. *

If useDaylight is false, this value is ignored. * @serial */ private int startMonth; /** * This field has two possible interpretations: *

*
startMode == DOW_IN_MONTH
*
* startDay indicates the day of the month of * startMonth on which daylight * saving time starts, from 1 to 28, 30, or 31, depending on the * startMonth. *
*
startMode != DOW_IN_MONTH
*
* startDay indicates which startDayOfWeek in the * month startMonth daylight * saving time starts on. For example, a value of +1 and a * startDayOfWeek of Calendar.SUNDAY indicates the * first Sunday of startMonth. Likewise, +2 would indicate the * second Sunday, and -1 the last Sunday. A value of 0 is illegal. *
*
*

If useDaylight is false, this value is ignored. * @serial */ private int startDay; /** * The day of the week on which daylight saving time starts. This value * must be between Calendar.SUNDAY and * Calendar.SATURDAY inclusive. *

If useDaylight is false or * startMode == DAY_OF_MONTH, this value is ignored. * @serial */ private int startDayOfWeek; /** * The time in milliseconds after midnight at which daylight saving * time starts. This value is expressed as wall time, standard time, * or UTC time, depending on the setting of startTimeMode. *

If useDaylight is false, this value is ignored. * @serial */ private int startTime; /** * The format of startTime, either WALL_TIME, STANDARD_TIME, or UTC_TIME. * @serial * @since 1.3 */ private int startTimeMode; /** * The month in which daylight saving time ends. This value must be * between Calendar.JANUARY and * Calendar.UNDECIMBER. This value must not equal * startMonth. *

If useDaylight is false, this value is ignored. * @serial */ private int endMonth; /** * This field has two possible interpretations: *

*
endMode == DOW_IN_MONTH
*
* endDay indicates the day of the month of * endMonth on which daylight * saving time ends, from 1 to 28, 30, or 31, depending on the * endMonth. *
*
endMode != DOW_IN_MONTH
*
* endDay indicates which endDayOfWeek in th * month endMonth daylight * saving time ends on. For example, a value of +1 and a * endDayOfWeek of Calendar.SUNDAY indicates the * first Sunday of endMonth. Likewise, +2 would indicate the * second Sunday, and -1 the last Sunday. A value of 0 is illegal. *
*
*

If useDaylight is false, this value is ignored. * @serial */ private int endDay; /** * The day of the week on which daylight saving time ends. This value * must be between Calendar.SUNDAY and * Calendar.SATURDAY inclusive. *

If useDaylight is false or * endMode == DAY_OF_MONTH, this value is ignored. * @serial */ private int endDayOfWeek; /** * The time in milliseconds after midnight at which daylight saving * time ends. This value is expressed as wall time, standard time, * or UTC time, depending on the setting of endTimeMode. *

If useDaylight is false, this value is ignored. * @serial */ private int endTime; /** * The format of endTime, either WALL_TIME, * STANDARD_TIME, or UTC_TIME. * @serial * @since 1.3 */ private int endTimeMode; /** * The year in which daylight saving time is first observed. This is an {@link GregorianCalendar#AD AD} * value. If this value is less than 1 then daylight saving time is observed * for all AD years. *

If useDaylight is false, this value is ignored. * @serial */ private int startYear; /** * The offset in milliseconds between this zone and GMT. Negative offsets * are to the west of Greenwich. To obtain local standard time, * add the offset to GMT time. To obtain local wall time it may also be * necessary to add dstSavings. * @serial */ private int rawOffset; /** * A boolean value which is true if and only if this zone uses daylight * saving time. If this value is false, several other fields are ignored. * @serial */ private boolean useDaylight=false; // indicate if this time zone uses DST private static final int millisPerHour = 60*60*1000; private static final int millisPerDay = 24*millisPerHour; /** * This field was serialized in JDK 1.1, so we have to keep it that way * to maintain serialization compatibility. However, there's no need to * recreate the array each time we create a new time zone. * @serial An array of bytes containing the values {31, 28, 31, 30, 31, 30, * 31, 31, 30, 31, 30, 31}. This is ignored as of the Java 2 platform v1.2, however, it must * be streamed out for compatibility with JDK 1.1. */ private final byte monthLength[] = staticMonthLength; private final static byte staticMonthLength[] = {31,28,31,30,31,30,31,31,30,31,30,31}; private final static byte staticLeapMonthLength[] = {31,29,31,30,31,30,31,31,30,31,30,31}; /** * Variables specifying the mode of the start rule. Takes the following * values: *

*
DOM_MODE
*
* Exact day of week; e.g., March 1. *
*
DOW_IN_MONTH_MODE
*
* Day of week in month; e.g., last Sunday in March. *
*
DOW_GE_DOM_MODE
*
* Day of week after day of month; e.g., Sunday on or after March 15. *
*
DOW_LE_DOM_MODE
*
* Day of week before day of month; e.g., Sunday on or before March 15. *
*
* The setting of this field affects the interpretation of the * startDay field. *

If useDaylight is false, this value is ignored. * @serial * @since 1.1.4 */ private int startMode; /** * Variables specifying the mode of the end rule. Takes the following * values: *

*
DOM_MODE
*
* Exact day of week; e.g., March 1. *
*
DOW_IN_MONTH_MODE
*
* Day of week in month; e.g., last Sunday in March. *
*
DOW_GE_DOM_MODE
*
* Day of week after day of month; e.g., Sunday on or after March 15. *
*
DOW_LE_DOM_MODE
*
* Day of week before day of month; e.g., Sunday on or before March 15. *
*
* The setting of this field affects the interpretation of the * endDay field. *

If useDaylight is false, this value is ignored. * @serial * @since 1.1.4 */ private int endMode; /** * A positive value indicating the amount of time saved during DST in * milliseconds. * Typically one hour (3600000); sometimes 30 minutes (1800000). *

If useDaylight is false, this value is ignored. * @serial * @since 1.1.4 */ private int dstSavings; private static final Gregorian gcal = CalendarSystem.getGregorianCalendar(); /** * Cache values representing a single period of daylight saving * time. When the cache values are valid, cacheStart is the start * time (inclusive) of daylight saving time and cacheEnd is the * end time (exclusive). * * cacheYear has a year value if both cacheStart and cacheEnd are * in the same year. cacheYear is set to startYear - 1 if * cacheStart and cacheEnd are in different years. cacheStart is 0 * if the cache values are void. cacheYear is a long to support * Integer.MIN_VALUE - 1 (JCK requirement). */ private transient long cacheYear; private transient long cacheStart; private transient long cacheEnd; /** * Constants specifying values of startMode and endMode. */ private static final int DOM_MODE = 1; // Exact day of month, "Mar 1" private static final int DOW_IN_MONTH_MODE = 2; // Day of week in month, "lastSun" private static final int DOW_GE_DOM_MODE = 3; // Day of week after day of month, "Sun>=15" private static final int DOW_LE_DOM_MODE = 4; // Day of week before day of month, "Sun<=21" /** * Constant for a mode of start or end time specified as wall clock * time. Wall clock time is standard time for the onset rule, and * daylight time for the end rule. * @since 1.4 */ public static final int WALL_TIME = 0; // Zero for backward compatibility /** * Constant for a mode of start or end time specified as standard time. * @since 1.4 */ public static final int STANDARD_TIME = 1; /** * Constant for a mode of start or end time specified as UTC. European * Union rules are specified as UTC time, for example. * @since 1.4 */ public static final int UTC_TIME = 2; // Proclaim compatibility with 1.1 static final long serialVersionUID = -403250971215465050L; // the internal serial version which says which version was written // - 0 (default) for version up to JDK 1.1.3 // - 1 for version from JDK 1.1.4, which includes 3 new fields // - 2 for JDK 1.3, which includes 2 new fields static final int currentSerialVersion = 2; /** * The version of the serialized data on the stream. Possible values: *

*
0 or not present on stream
*
* JDK 1.1.3 or earlier. *
*
1
*
* JDK 1.1.4 or later. Includes three new fields: startMode, * endMode, and dstSavings. *
*
2
*
* JDK 1.3 or later. Includes two new fields: startTimeMode * and endTimeMode. *
*
* When streaming out this class, the most recent format * and the highest allowable serialVersionOnStream * is written. * @serial * @since 1.1.4 */ private int serialVersionOnStream = currentSerialVersion; synchronized private void invalidateCache() { cacheYear = startYear - 1; cacheStart = cacheEnd = 0; } //---------------------------------------------------------------------- // Rule representation // // We represent the following flavors of rules: // 5 the fifth of the month // lastSun the last Sunday in the month // lastMon the last Monday in the month // Sun>=8 first Sunday on or after the eighth // Sun<=25 last Sunday on or before the 25th // This is further complicated by the fact that we need to remain // backward compatible with the 1.1 FCS. Finally, we need to minimize // API changes. In order to satisfy these requirements, we support // three representation systems, and we translate between them. // // INTERNAL REPRESENTATION // This is the format SimpleTimeZone objects take after construction or // streaming in is complete. Rules are represented directly, using an // unencoded format. We will discuss the start rule only below; the end // rule is analogous. // startMode Takes on enumerated values DAY_OF_MONTH, // DOW_IN_MONTH, DOW_AFTER_DOM, or DOW_BEFORE_DOM. // startDay The day of the month, or for DOW_IN_MONTH mode, a // value indicating which DOW, such as +1 for first, // +2 for second, -1 for last, etc. // startDayOfWeek The day of the week. Ignored for DAY_OF_MONTH. // // ENCODED REPRESENTATION // This is the format accepted by the constructor and by setStartRule() // and setEndRule(). It uses various combinations of positive, negative, // and zero values to encode the different rules. This representation // allows us to specify all the different rule flavors without altering // the API. // MODE startMonth startDay startDayOfWeek // DOW_IN_MONTH_MODE >=0 !=0 >0 // DOM_MODE >=0 >0 ==0 // DOW_GE_DOM_MODE >=0 >0 <0 // DOW_LE_DOM_MODE >=0 <0 <0 // (no DST) don't care ==0 don't care // // STREAMED REPRESENTATION // We must retain binary compatibility with the 1.1 FCS. The 1.1 code only // handles DOW_IN_MONTH_MODE and non-DST mode, the latter indicated by the // flag useDaylight. When we stream an object out, we translate into an // approximate DOW_IN_MONTH_MODE representation so the object can be parsed // and used by 1.1 code. Following that, we write out the full // representation separately so that contemporary code can recognize and // parse it. The full representation is written in a "packed" format, // consisting of a version number, a length, and an array of bytes. Future // versions of this class may specify different versions. If they wish to // include additional data, they should do so by storing them after the // packed representation below. //---------------------------------------------------------------------- /** * Given a set of encoded rules in startDay and startDayOfMonth, decode * them and set the startMode appropriately. Do the same for endDay and * endDayOfMonth. Upon entry, the day of week variables may be zero or * negative, in order to indicate special modes. The day of month * variables may also be negative. Upon exit, the mode variables will be * set, and the day of week and day of month variables will be positive. * This method also recognizes a startDay or endDay of zero as indicating * no DST. */ private void decodeRules() { decodeStartRule(); decodeEndRule(); } /** * Decode the start rule and validate the parameters. The parameters are * expected to be in encoded form, which represents the various rule modes * by negating or zeroing certain values. Representation formats are: *

*

     *            DOW_IN_MONTH  DOM    DOW>=DOM  DOW<=DOM  no DST
     *            ------------  -----  --------  --------  ----------
     * month       0..11        same    same      same     don't care
     * day        -5..5         1..31   1..31    -1..-31   0
     * dayOfWeek   1..7         0      -1..-7    -1..-7    don't care
     * time        0..ONEDAY    same    same      same     don't care
     * 
* The range for month does not include UNDECIMBER since this class is * really specific to GregorianCalendar, which does not use that month. * The range for time includes ONEDAY (vs. ending at ONEDAY-1) because the * end rule is an exclusive limit point. That is, the range of times that * are in DST include those >= the start and < the end. For this reason, * it should be possible to specify an end of ONEDAY in order to include the * entire day. Although this is equivalent to time 0 of the following day, * it's not always possible to specify that, for example, on December 31. * While arguably the start range should still be 0..ONEDAY-1, we keep * the start and end ranges the same for consistency. */ private void decodeStartRule() { useDaylight = (startDay != 0) && (endDay != 0); if (startDay != 0) { if (startMonth < Calendar.JANUARY || startMonth > Calendar.DECEMBER) { throw new IllegalArgumentException( "Illegal start month " + startMonth); } if (startTime < 0 || startTime > millisPerDay) { throw new IllegalArgumentException( "Illegal start time " + startTime); } if (startDayOfWeek == 0) { startMode = DOM_MODE; } else { if (startDayOfWeek > 0) { startMode = DOW_IN_MONTH_MODE; } else { startDayOfWeek = -startDayOfWeek; if (startDay > 0) { startMode = DOW_GE_DOM_MODE; } else { startDay = -startDay; startMode = DOW_LE_DOM_MODE; } } if (startDayOfWeek > Calendar.SATURDAY) { throw new IllegalArgumentException( "Illegal start day of week " + startDayOfWeek); } } if (startMode == DOW_IN_MONTH_MODE) { if (startDay < -5 || startDay > 5) { throw new IllegalArgumentException( "Illegal start day of week in month " + startDay); } } else if (startDay < 1 || startDay > staticMonthLength[startMonth]) { throw new IllegalArgumentException( "Illegal start day " + startDay); } } } /** * Decode the end rule and validate the parameters. This method is exactly * analogous to decodeStartRule(). * @see decodeStartRule */ private void decodeEndRule() { useDaylight = (startDay != 0) && (endDay != 0); if (endDay != 0) { if (endMonth < Calendar.JANUARY || endMonth > Calendar.DECEMBER) { throw new IllegalArgumentException( "Illegal end month " + endMonth); } if (endTime < 0 || endTime > millisPerDay) { throw new IllegalArgumentException( "Illegal end time " + endTime); } if (endDayOfWeek == 0) { endMode = DOM_MODE; } else { if (endDayOfWeek > 0) { endMode = DOW_IN_MONTH_MODE; } else { endDayOfWeek = -endDayOfWeek; if (endDay > 0) { endMode = DOW_GE_DOM_MODE; } else { endDay = -endDay; endMode = DOW_LE_DOM_MODE; } } if (endDayOfWeek > Calendar.SATURDAY) { throw new IllegalArgumentException( "Illegal end day of week " + endDayOfWeek); } } if (endMode == DOW_IN_MONTH_MODE) { if (endDay < -5 || endDay > 5) { throw new IllegalArgumentException( "Illegal end day of week in month " + endDay); } } else if (endDay < 1 || endDay > staticMonthLength[endMonth]) { throw new IllegalArgumentException( "Illegal end day " + endDay); } } } /** * Make rules compatible to 1.1 FCS code. Since 1.1 FCS code only understands * day-of-week-in-month rules, we must modify other modes of rules to their * approximate equivalent in 1.1 FCS terms. This method is used when streaming * out objects of this class. After it is called, the rules will be modified, * with a possible loss of information. startMode and endMode will NOT be * altered, even though semantically they should be set to DOW_IN_MONTH_MODE, * since the rule modification is only intended to be temporary. */ private void makeRulesCompatible() { switch (startMode) { case DOM_MODE: startDay = 1 + (startDay / 7); startDayOfWeek = Calendar.SUNDAY; break; case DOW_GE_DOM_MODE: // A day-of-month of 1 is equivalent to DOW_IN_MONTH_MODE // that is, Sun>=1 == firstSun. if (startDay != 1) { startDay = 1 + (startDay / 7); } break; case DOW_LE_DOM_MODE: if (startDay >= 30) { startDay = -1; } else { startDay = 1 + (startDay / 7); } break; } switch (endMode) { case DOM_MODE: endDay = 1 + (endDay / 7); endDayOfWeek = Calendar.SUNDAY; break; case DOW_GE_DOM_MODE: // A day-of-month of 1 is equivalent to DOW_IN_MONTH_MODE // that is, Sun>=1 == firstSun. if (endDay != 1) { endDay = 1 + (endDay / 7); } break; case DOW_LE_DOM_MODE: if (endDay >= 30) { endDay = -1; } else { endDay = 1 + (endDay / 7); } break; } /* * Adjust the start and end times to wall time. This works perfectly * well unless it pushes into the next or previous day. If that * happens, we attempt to adjust the day rule somewhat crudely. The day * rules have been forced into DOW_IN_MONTH mode already, so we change * the day of week to move forward or back by a day. It's possible to * make a more refined adjustment of the original rules first, but in * most cases this extra effort will go to waste once we adjust the day * rules anyway. */ switch (startTimeMode) { case UTC_TIME: startTime += rawOffset; break; } while (startTime < 0) { startTime += millisPerDay; startDayOfWeek = 1 + ((startDayOfWeek+5) % 7); // Back 1 day } while (startTime >= millisPerDay) { startTime -= millisPerDay; startDayOfWeek = 1 + (startDayOfWeek % 7); // Forward 1 day } switch (endTimeMode) { case UTC_TIME: endTime += rawOffset + dstSavings; break; case STANDARD_TIME: endTime += dstSavings; } while (endTime < 0) { endTime += millisPerDay; endDayOfWeek = 1 + ((endDayOfWeek+5) % 7); // Back 1 day } while (endTime >= millisPerDay) { endTime -= millisPerDay; endDayOfWeek = 1 + (endDayOfWeek % 7); // Forward 1 day } } /** * Pack the start and end rules into an array of bytes. Only pack * data which is not preserved by makeRulesCompatible. */ private byte[] packRules() { byte[] rules = new byte[6]; rules[0] = (byte)startDay; rules[1] = (byte)startDayOfWeek; rules[2] = (byte)endDay; rules[3] = (byte)endDayOfWeek; // As of serial version 2, include time modes rules[4] = (byte)startTimeMode; rules[5] = (byte)endTimeMode; return rules; } /** * Given an array of bytes produced by packRules, interpret them * as the start and end rules. */ private void unpackRules(byte[] rules) { startDay = rules[0]; startDayOfWeek = rules[1]; endDay = rules[2]; endDayOfWeek = rules[3]; // As of serial version 2, include time modes if (rules.length >= 6) { startTimeMode = rules[4]; endTimeMode = rules[5]; } } /** * Pack the start and end times into an array of bytes. This is required * as of serial version 2. */ private int[] packTimes() { int[] times = new int[2]; times[0] = startTime; times[1] = endTime; return times; } /** * Unpack the start and end times from an array of bytes. This is required * as of serial version 2. */ private void unpackTimes(int[] times) { startTime = times[0]; endTime = times[1]; } /** * Save the state of this object to a stream (i.e., serialize it). * * @serialData We write out two formats, a JDK 1.1 compatible format, using * DOW_IN_MONTH_MODE rules, in the required section, followed * by the full rules, in packed format, in the optional section. The * optional section will be ignored by JDK 1.1 code upon stream in. *

Contents of the optional section: The length of a byte array is * emitted (int); this is 4 as of this release. The byte array of the given * length is emitted. The contents of the byte array are the true values of * the fields startDay, startDayOfWeek, * endDay, and endDayOfWeek. The values of these * fields in the required section are approximate values suited to the rule * mode DOW_IN_MONTH_MODE, which is the only mode recognized by * JDK 1.1. */ private void writeObject(ObjectOutputStream stream) throws IOException { // Construct a binary rule byte[] rules = packRules(); int[] times = packTimes(); // Convert to 1.1 FCS rules. This step may cause us to lose information. makeRulesCompatible(); // Write out the 1.1 FCS rules stream.defaultWriteObject(); // Write out the binary rules in the optional data area of the stream. stream.writeInt(rules.length); stream.write(rules); stream.writeObject(times); // Recover the original rules. This recovers the information lost // by makeRulesCompatible. unpackRules(rules); unpackTimes(times); } /** * Reconstitute this object from a stream (i.e., deserialize it). * * We handle both JDK 1.1 * binary formats and full formats with a packed byte array. */ private void readObject(ObjectInputStream stream) throws IOException, ClassNotFoundException { stream.defaultReadObject(); if (serialVersionOnStream < 1) { // Fix a bug in the 1.1 SimpleTimeZone code -- namely, // startDayOfWeek and endDayOfWeek were usually uninitialized. We can't do // too much, so we assume SUNDAY, which actually works most of the time. if (startDayOfWeek == 0) { startDayOfWeek = Calendar.SUNDAY; } if (endDayOfWeek == 0) { endDayOfWeek = Calendar.SUNDAY; } // The variables dstSavings, startMode, and endMode are post-1.1, so they // won't be present if we're reading from a 1.1 stream. Fix them up. startMode = endMode = DOW_IN_MONTH_MODE; dstSavings = millisPerHour; } else { // For 1.1.4, in addition to the 3 new instance variables, we also // store the actual rules (which have not be made compatible with 1.1) // in the optional area. Read them in here and parse them. int length = stream.readInt(); byte[] rules = new byte[length]; stream.readFully(rules); unpackRules(rules); } if (serialVersionOnStream >= 2) { int[] times = (int[]) stream.readObject(); unpackTimes(times); } serialVersionOnStream = currentSerialVersion; } }