/* * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. Oracle designates this * particular file as subject to the "Classpath" exception as provided * by Oracle in the LICENSE file that accompanied this code. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. */ /* * This file is available under and governed by the GNU General Public * License version 2 only, as published by the Free Software Foundation. * However, the following notice accompanied the original version of this * file and, per its terms, should not be removed: * * Copyright (c) 2004 World Wide Web Consortium, * * (Massachusetts Institute of Technology, European Research Consortium for * Informatics and Mathematics, Keio University). All Rights Reserved. This * work is distributed under the W3C(r) Software License [1] in the hope that * it will be useful, but WITHOUT ANY WARRANTY; without even the implied * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * * [1] http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231 */ package org.w3c.dom; /** * The DOMConfiguration interface represents the configuration * of a document and maintains a table of recognized parameters. Using the * configuration, it is possible to change * Document.normalizeDocument() behavior, such as replacing the * CDATASection nodes with Text nodes or * specifying the type of the schema that must be used when the validation * of the Document is requested. DOMConfiguration * objects are also used in [DOM Level 3 Load and Save] * in the DOMParser and DOMSerializer interfaces. *

The parameter names used by the DOMConfiguration object * are defined throughout the DOM Level 3 specifications. Names are * case-insensitive. To avoid possible conflicts, as a convention, names * referring to parameters defined outside the DOM specification should be * made unique. Because parameters are exposed as properties in names * are recommended to follow the section 5.16 Identifiers of [Unicode] with the addition of the character '-' (HYPHEN-MINUS) but it is not * enforced by the DOM implementation. DOM Level 3 Core Implementations are * required to recognize all parameters defined in this specification. Some * parameter values may also be required to be supported by the * implementation. Refer to the definition of the parameter to know if a * value must be supported or not. *

Note: Parameters are similar to features and properties used in * SAX2 [SAX]. *

The following list of parameters defined in the DOM: *

*
* "canonical-form"
*
*
*
true
*
[optional] Canonicalize the document according to the rules specified in [Canonical XML], * such as removing the DocumentType node (if any) from the * tree, or removing superfluous namespace declarations from each element. * Note that this is limited to what can be represented in the DOM; in * particular, there is no way to specify the order of the attributes in the * DOM. In addition, Setting this parameter to true will also * set the state of the parameters listed below. Later changes to the state * of one of those parameters will revert "canonical-form" back to * false. Parameters set to false: "entities", " * normalize-characters", "cdata-sections". Parameters set to * true: "namespaces", "namespace-declarations", "well-formed", * "element-content-whitespace". Other parameters are not changed unless * explicitly specified in the description of the parameters.
*
* false
*
[required] (default)Do not canonicalize the document.
*
*
"cdata-sections"
*
*
*
* true
*
[required] (default)Keep CDATASection nodes in the document.
*
false
*
[required]Transform CDATASection nodes in the document into * Text nodes. The new Text node is then combined * with any adjacent Text node.
*
*
* "check-character-normalization"
*
*
*
true
*
[optional] Check if the characters in the document are fully * normalized, as defined in appendix B of [XML 1.1]. When a * sequence of characters is encountered that fails normalization checking, * an error with the DOMError.type equals to * "check-character-normalization-failure" is issued.
*
false
*
[required] (default)Do not check if characters are normalized.
*
*
"comments"
*
*
*
* true
*
[required] (default)Keep Comment nodes in the document.
*
false
*
[required]Discard Comment nodes in the document.
*
*
* "datatype-normalization"
*
*
*
true
*
[optional] Expose schema normalized values in the tree, such as XML * Schema normalized values in the case of XML Schema. Since this parameter requires to have schema * information, the "validate" parameter will also be set to * true. Having this parameter activated when "validate" is * false has no effect and no schema-normalization will happen. *

Note: Since the document contains the result of the XML 1.0 * processing, this parameter does not apply to attribute value * normalization as defined in section 3.3.3 of [XML 1.0] and is only * meant for schema languages other than Document Type Definition (DTD).

*
* false
*
[required] (default) Do not perform schema normalization on the tree.
*
*
* "element-content-whitespace"
*
*
*
true
*
[required] (default)Keep all whitespaces in the document.
*
false
*
[optional] Discard all Text nodes that contain whitespaces in element * content, as described in * [element content whitespace]. The implementation is expected to use the attribute * Text.isElementContentWhitespace to determine if a * Text node should be discarded or not.
*
*
"entities"
*
*
*
* true
*
[required] (default)Keep EntityReference nodes in the document.
*
* false
*
[required] Remove all EntityReference nodes from the document, * putting the entity expansions directly in their place. Text * nodes are normalized, as defined in Node.normalize. Only * unexpanded entity references are kept in the document.
*
*

Note: This parameter does not affect Entity nodes.

*
* "error-handler"
*
[required] Contains a DOMErrorHandler object. If an error is * encountered in the document, the implementation will call back the * DOMErrorHandler registered using this parameter. The * implementation may provide a default DOMErrorHandler object. * When called, DOMError.relatedData will contain the closest * node to where the error occurred. If the implementation is unable to * determine the node where the error occurs, * DOMError.relatedData will contain the Document * node. Mutations to the document from within an error handler will result * in implementation dependent behavior.
*
"infoset"
*
*
*
* true
*
[required]Keep in the document the information defined in the XML Information Set [XML Information Set] * .This forces the following parameters to false: " * validate-if-schema", "entities", "datatype-normalization", "cdata-sections * ".This forces the following parameters to true: " * namespace-declarations", "well-formed", "element-content-whitespace", " * comments", "namespaces".Other parameters are not changed unless * explicitly specified in the description of the parameters. Note that * querying this parameter with getParameter returns * true only if the individual parameters specified above are * appropriately set.
*
false
*
Setting infoset to * false has no effect.
*
*
"namespaces"
*
*
*
* true
*
[required] (default) Perform the namespace processing as defined in .
*
false
*
[optional] Do not perform the namespace processing.
*
*
* "namespace-declarations"
*
This parameter has no effect if the * parameter "namespaces" is set to false. *
*
true
*
[required] (default) Include namespace declaration attributes, specified or defaulted from * the schema, in the document. See also the sections "Declaring Namespaces" * in [XML Namespaces] * and [XML Namespaces 1.1] * .
*
false
*
[required]Discard all namespace declaration attributes. The namespace prefixes ( * Node.prefix) are retained even if this parameter is set to * false.
*
*
"normalize-characters"
*
*
*
true
*
[optional] Fully * normalized the characters in the document as defined in appendix B of [XML 1.1].
*
* false
*
[required] (default)Do not perform character normalization.
*
*
"schema-location"
*
[optional] Represent a DOMString object containing a list of URIs, * separated by whitespaces (characters matching the nonterminal * production S defined in section 2.3 [XML 1.0]), that * represents the schemas against which validation should occur, i.e. the * current schema. The types of schemas referenced in this list must match * the type specified with schema-type, otherwise the behavior * of an implementation is undefined. The schemas specified using this * property take precedence to the schema information specified in the * document itself. For namespace aware schema, if a schema specified using * this property and a schema specified in the document instance (i.e. using * the schemaLocation attribute) in a schema document (i.e. * using schema import mechanisms) share the same * targetNamespace, the schema specified by the user using this * property will be used. If two schemas specified using this property share * the same targetNamespace or have no namespace, the behavior * is implementation dependent. If no location has been provided, this * parameter is null. *

Note: The "schema-location" parameter is ignored * unless the "schema-type" parameter value is set. It is strongly * recommended that Document.documentURI will be set so that an * implementation can successfully resolve any external entities referenced.

*
* "schema-type"
*
[optional] Represent a DOMString object containing an absolute URI * and representing the type of the schema language used to validate a * document against. Note that no lexical checking is done on the absolute * URI. If this parameter is not set, a default value may be provided by * the implementation, based on the schema languages supported and on the * schema language used at load time. If no value is provided, this * parameter is null. *

Note: For XML Schema [XML Schema Part 1] * , applications must use the value * "http://www.w3.org/2001/XMLSchema". For XML DTD [XML 1.0], * applications must use the value * "http://www.w3.org/TR/REC-xml". Other schema languages are * outside the scope of the W3C and therefore should recommend an absolute * URI in order to use this method.

*
"split-cdata-sections"
*
*
*
* true
*
[required] (default)Split CDATA sections containing the CDATA section termination marker * ']]>'. When a CDATA section is split a warning is issued with a * DOMError.type equals to * "cdata-sections-splitted" and * DOMError.relatedData equals to the first * CDATASection node in document order resulting from the split.
*
* false
*
[required]Signal an error if a CDATASection contains an * unrepresentable character.
*
*
"validate"
*
*
*
true
*
[optional] Require the validation against a schema (i.e. XML schema, DTD, any * other type or representation of schema) of the document as it is being * normalized as defined by [XML 1.0]. If * validation errors are found, or no schema was found, the error handler is * notified. Schema-normalized values will not be exposed according to the * schema in used unless the parameter "datatype-normalization" is * true. This parameter will reevaluate: *
    *
  • Attribute nodes with * Attr.specified equals to false, as specified in * the description of the Attr interface; *
  • *
  • The value of the * attribute Text.isElementContentWhitespace for all * Text nodes; *
  • *
  • The value of the attribute * Attr.isId for all Attr nodes; *
  • *
  • The attributes * Element.schemaTypeInfo and Attr.schemaTypeInfo. *
  • *
*

Note: "validate-if-schema" and "validate" are mutually * exclusive, setting one of them to true will set the other * one to false. Applications should also consider setting the * parameter "well-formed" to true, which is the default for * that option, when validating the document.

*
false
*
[required] (default) Do not accomplish schema processing, including the internal subset * processing. Default attribute values information are kept. Note that * validation might still happen if "validate-if-schema" is true * .
*
*
"validate-if-schema"
*
*
*
true
*
[optional]Enable validation only if a declaration for the document element can be * found in a schema (independently of where it is found, i.e. XML schema, * DTD, or any other type or representation of schema). If validation is * enabled, this parameter has the same behavior as the parameter "validate" * set to true. *

Note: "validate-if-schema" and "validate" are mutually * exclusive, setting one of them to true will set the other * one to false.

*
false
*
[required] (default) No schema processing should be performed if the document has a schema, * including internal subset processing. Default attribute values * information are kept. Note that validation must still happen if "validate * " is true.
*
*
"well-formed"
*
*
*
true
*
[required] (default) Check if all nodes are XML well formed according to the XML version in * use in Document.xmlVersion: *
    *
  • check if the attribute * Node.nodeName contains invalid characters according to its * node type and generate a DOMError of type * "wf-invalid-character-in-node-name", with a * DOMError.SEVERITY_ERROR severity, if necessary; *
  • *
  • check if * the text content inside Attr, Element, * Comment, Text, CDATASection nodes * for invalid characters and generate a DOMError of type * "wf-invalid-character", with a * DOMError.SEVERITY_ERROR severity, if necessary; *
  • *
  • check if * the data inside ProcessingInstruction nodes for invalid * characters and generate a DOMError of type * "wf-invalid-character", with a * DOMError.SEVERITY_ERROR severity, if necessary; *
  • *
*
* false
*
[optional] Do not check for XML well-formedness.
*
*
*

The resolution of the system identifiers associated with entities is * done using Document.documentURI. However, when the feature * "LS" defined in [DOM Level 3 Load and Save] * is supported by the DOM implementation, the parameter * "resource-resolver" can also be used on DOMConfiguration * objects attached to Document nodes. If this parameter is * set, Document.normalizeDocument() will invoke the resource * resolver instead of using Document.documentURI. *

See also the Document Object Model (DOM) Level 3 Core Specification. * @since DOM Level 3 */ public interface DOMConfiguration { /** * Set the value of a parameter. * @param name The name of the parameter to set. * @param value The new value or null if the user wishes to * unset the parameter. While the type of the value parameter is * defined as DOMUserData, the object type must match the * type defined by the definition of the parameter. For example, if * the parameter is "error-handler", the value must be of type * DOMErrorHandler. * @exception DOMException * NOT_FOUND_ERR: Raised when the parameter name is not recognized. *
NOT_SUPPORTED_ERR: Raised when the parameter name is recognized * but the requested value cannot be set. *
TYPE_MISMATCH_ERR: Raised if the value type for this parameter * name is incompatible with the expected value type. */ public void setParameter(String name, Object value) throws DOMException; /** * Return the value of a parameter if known. * @param name The name of the parameter. * @return The current object associated with the specified parameter or * null if no object has been associated or if the * parameter is not supported. * @exception DOMException * NOT_FOUND_ERR: Raised when the parameter name is not recognized. */ public Object getParameter(String name) throws DOMException; /** * Check if setting a parameter to a specific value is supported. * @param name The name of the parameter to check. * @param value An object. if null, the returned value is * true. * @return true if the parameter could be successfully set * to the specified value, or false if the parameter is * not recognized or the requested value is not supported. This does * not change the current value of the parameter itself. */ public boolean canSetParameter(String name, Object value); /** * The list of the parameters supported by this * DOMConfiguration object and for which at least one value * can be set by the application. Note that this list can also contain * parameter names defined outside this specification. */ public DOMStringList getParameterNames(); }