Cross Reference: /vbox/src/VBox/Devices/PC/BIOS/ahci.c

Lines Matching defs:DBG_AHCI
27 # define DBG_AHCI(...)        BX_INFO(__VA_ARGS__)
29 # define DBG_AHCI(...)
318         DBG_AHCI("AHCI: Waiting for D2H FIS\n");
334         DBG_AHCI("AHCI: Invalid port given\n");
371     DBG_AHCI("AHCI: S/G list for %lu bytes (skip %u)\n",
392         DBG_AHCI("S/G entry %u: %5lu bytes @ %08lX\n", prdt_idx,
412     DBG_AHCI("AHCI: ERR=%02x, STAT=%02x, SCNT=%02x\n", d2h->error, d2h->status, d2h->sec_cn);
439             DBG_AHCI("AHCI: Waiting for the port to idle\n");
480         DBG_AHCI("AHCI: Waiting for the port to idle\n");
492     DBG_AHCI("AHCI: FIS receive area %lx from %x:%x\n",
497     DBG_AHCI("AHCI: CMD list area %lx\n", ahci_addr_to_phys(&ahci->aCmdHdr));
527     DBG_AHCI("%s: %u sectors @ LBA %lu, device %d, port %d\n", __func__,
534     DBG_AHCI("%s: transferred %lu bytes\n", __func__, ((ahci_t __far *)(bios_dsk->ahci_seg :> 0))->aCmdHdr[1]);
559     DBG_AHCI("%s: %u sectors @ LBA %lu, device %d, port %d\n", __func__,
566     DBG_AHCI("%s: transferred %lu bytes\n", __func__, ((ahci_t __far *)(bios_dsk->ahci_seg :> 0))->aCmdHdr[1]);
591         DBG_AHCI("%s: skip must be even (%04x)\n", __func__, skip_b);
598     DBG_AHCI("%s: reading %lu bytes, skip %u/%u, device %d, port %d\n", __func__,
601     DBG_AHCI("%s: reading %u %u-byte sectors\n", __func__,
630     DBG_AHCI("%s: transferred %lu bytes\n", __func__, ahci->aCmdHdr[1]);
679         DBG_AHCI("AHCI: Device detected on port %d\n", u8Port);
697                 DBG_AHCI("AHCI: Detected hard disk\n");
719                 DBG_AHCI("AHCI: %ld sectors\n", sectors);
779                 DBG_AHCI("AHCI: Detected ATAPI device\n");
806                 DBG_AHCI("AHCI: Ignoring unknown device\n");
812             DBG_AHCI("AHCI: Reached maximum device count, skipping\n");
826     DBG_AHCI("AHCI: %dK of base mem\n", base_mem_kb);
856     DBG_AHCI("AHCI: Controller version: 0x%x (major) 0x%x (minor)\n",
864         DBG_AHCI("AHCI: Could not allocate 1K of memory, can't boot from controller\n");
867     DBG_AHCI("AHCI: ahci_seg=%04x, size=%04x, pointer at EBDA:%04x (EBDA size=%04x)\n",
892     DBG_AHCI("AHCI: HBA has %u ports\n", cPorts);
900             DBG_AHCI("AHCI: Port %u is present\n", i);
928         DBG_AHCI("AHCI HBA at Bus %u DevFn 0x%x (raw 0x%x)\n", u8Bus, u8DevFn, busdevfn);
937             DBG_AHCI("Capability ID 0x%x at 0x%x\n", u8PciCapId, u8PciCapOff);
950             DBG_AHCI("AHCI HBA with SATA Capability register at 0x%x\n", u8PciCapOff);
963                 DBG_AHCI("SATACR1: 0x%x\n", u16BarOff);
988                         DBG_AHCI("BAR 0x%x unsupported\n", u16BarOff & 0xf);
998                     DBG_AHCI("BAR at 0x%x : 0x%x\n", u8Bar, u32Bar);
1005                         DBG_AHCI("I/O base: 0x%x\n", u16AhciIoBase);
1009                         DBG_AHCI("BAR is MMIO\n");
1013                 DBG_AHCI("Invalid revision 0x%x\n", u8Rev);
1016             DBG_AHCI("AHCI HBA with no usable Index/Data register pair!\n");
1019         DBG_AHCI("No AHCI HBA!\n");