72 #include <sys/hotplug/hpctrl.h>		/* XXX should be included by schpc.h */
127  * There must be a distinction between the available and usable do to a
322  * by DR will remain NULL, as programmed by POST. This can be used to
627 	 * dip doesn't have to be held here as we are called
662 	 * Root node doesn't have to be held in any way.
815 		 * held, or it will be the child of a CMP. In either
1081 		 * root should still be present in the device tree.
1103 			 * If non-NULL, fdip is returned held and must be
1392  * dynamic setting of drmach_to_putmsg (thereby allowing it to be tuned in
1622  * handshake needs to be scheduled.  The handshake can't be performed by the
1669  * that could possibly be sent to us.  However, since that ends up being fairly
1671  * does not need to be MT-safe since it is only invoked by the mailbox
1718 		dr_boardevent_t	*be;
1719 		be = (dr_boardevent_t *)&msg->msgdata;
1722 		if (be->initialized) {
1740 		/* anything else will be a log_sysevent call */
1742 		if (be->board_insertion) {
1747 		if (be->board_removal) {
1752 		if (be->slot_assign) {
1756 		if (be->slot_unassign) {
1760 		if (be->slot_avail) {
1764 		if (be->slot_unavail) {
1768 		if (be->power_on) {
1772 		if (be->power_off) {
2311 			 * type must be changed before returning to caller.
2422 		 * must be sent.
2607 	 * For Starcat, we must be children of the root devinfo node
2614 	 * Only children of the root devinfo node need to be
2789 	 * is for iopause to be enabled/disabled during axq suspend/resume. By
2911 	bp = id; /* bp will be NULL if board not found */
2913 	/* look up should never be out of bounds */
3036 	 * Write idle script for MC on this processor.  A script will be
3085 	 * be produced only if this processor is on the source or target
3308 	/* adjust copy memlist addresses to be relative to copy base pa */
3660 	 * be abandoned after the rename operation. The code is also
3665 	 * This code block must be moved to drmach_copy_rename_init.
3685 	 * the D$ and I$ must be flushed separately and explicitly.
3737 	 * The D$ and I$ must be flushed to ensure that coherency is
3741 	 * flushes are complete the cache line states will be
4053 		 * board cannot be touched.  Mark the status as
4240 	 * valid bit must true for the element to be meaningful.
4292  * CASM element for the local expander. This field is guaranteed to be
4296  * be zero or its valid bit will be false (or both).
4382 				 * MCPU cannot be xcalled.
4396 				 * memory since it will be used for e$ flush
4515 	 * This must be done prior to calling for saf configurator
4589 			 * board cannot be touched.  Mark the status as
4672  * node should be considered for a dr operation according
5218 	 * be a CMP device with a cpuid property.
5768 		 * This RIO could be on XMITS, so get the dip to
5791 		 * The network function of the RIO ASIC will always be
5958 			 * Root node doesn't have to be held in any way.
6028 			 * Root node doesn't have to be held in any way.
6114 	 * root i.e. dip must be present in the device tree.
6141 	 * Root node doesn't have to be held in any way.
6322 		 * that will be visible to the PIM layer.
6341 		 * to be visible to the PIM layer.
6973 	/* the following line must always be last */
7108 			 * If non-NULL, fdip is returned held and must be
7155 					 * Root node doesn't have to be held in
7205  * the cpu after an UNCONFIGURE in which case the cpu will be
7207  * Under normal circumstances the cpu will be coming from a previous
7208  * CONNECT and thus will be spinning in OBP.  In both cases, the
7263 	 * The CPUs remain paused and the prom_mutex is known to be free.
7281 	/* setup xt_mb, will be cleared by drmach_shutdown_asm when ready */
7372 	 * HPOST wants the address of the cage to be 64 megabyte-aligned
7460 	 * Once a fix is implemented in hardware, this code should be updated
7461 	 * to allow Jaguar CPUs that have the fix to be used. However, support
7462 	 * must be retained to skip revisions that do not have this fix.
7535  * a single CMP device. Non CMP devices can be handled as a
7539  * can be acquired. In the failure case, none of the devices
7540  * in the list will be held as acquired.
7710 			 *   2. There will only be a maximum of two cores
7714 			 * this code will have to be revisited.
7721 			 * Get the next device. It may or may not be used.
7923 	 * XXX This dip should really be held (via ndi_hold_devi())
7926 	 * the next suspend. drmach code should be modified to free the
7928 	 * slot 1 board is DRed out. The dip can then be released via
7931 	 * code should be careful about dereferencing the saved dip
8027 	 * XXX This dip should really be held (via ndi_hold_devi())
8030 	 * the next suspend. drmach code should be modified to free the
8032 	 * slot 1 board is DRed out. The dip can then be released via
8035 	 * code should be careful about dereferencing the saved dip as
8052 	 * Root node doesn't have to be held
8515 	/* every dip should be found during resume */
8735  * Only the valid entries are modified, so the array should be zeroed out
8757  * Only the valid entries are modified, so the array should be zeroed out
8775 		ASSERT(rv == 0);	/* should never be out of bounds */
8839 	 * The board flag DRMACH_NULL_PROC_LPA can be set for all board
8841 	 * L1SSFLG_THIS_L1_NULL_PROC_LPA, which can be set (and should be

Indexes created Tue Jul 24 14:28:13 CEST 2018