Lines Matching refs:drive
34 case that a drive supports LBA access and therefore the BIOS's geometry
48 reliably calculate the capacity of an ATA drive, but I can't make
58 Even assertions in the specs seem to be ignored; I have a drive for
71 with what the BIOS and the drive have figured out unless it
82 >reliably calculate the capacity of an ATA drive, but I can't make
92 >Even assertions in the specs seem to be ignored; I have a drive for
96 If the words [54]*[55]*[56] don't match [57:58] then the drive is
100 Of course Read/Set Max do alter the drive's apparent capacity but assuming
105 53:58. Words 60:61 are the drive capacity. But even if you must use CHS
106 mode, words 60:61 are still the true drive capacity but words 57:58 are
124 - Yes, you know that current CHS geometry of the drive, you are done.
130 2b) Does the drive support LBA and is [1]*[3]*[6] <= [60:61]?
141 The drive capacity is (num-cyl)*(favorite heads)*(favorite sectors).
146 drive capacity. Issue an Init Drv Params to set the default geometry
152 The drive capacity is (num-cyl)*(num-head)*(num-sectors).
158 think is the last sector on the drive. If this read fails with ABRT or
161 All we did here was find a CHS geometry and a drive capacity that should
162 work. If the drive has a Master Boot Record then this geometry may not