Cross Reference: /illumos-gate/usr/src/uts/common/io/usb/scsa2usb/scsa2usb.c

Lines Matching defs:lba
3790 	int lba, dir, opcode;
3811 		lba = SCSA2USB_LBA_6BYTE(pkt);
3817 		lba = SCSA2USB_LBA_6BYTE(pkt);
3824 		lba = SCSA2USB_LBA_10BYTE(pkt);
3830 		lba = SCSA2USB_LBA_10BYTE(pkt);
3841 		lba = SCSA2USB_LBA_10BYTE(pkt);
3849 		lba = SCSA2USB_LBA_12BYTE(pkt);
3854 		lba = SCSA2USB_LBA_12BYTE(pkt);
3911 	scsa2usb_fill_up_cdb_lba(cmd, lba);
3914 	    "bcount=0x%lx lba=0x%x len=0x%lx xfercount=0x%lx total=0x%lx",
3915 	    bp ? bp->b_bcount : 0, lba, len, cmd->cmd_xfercount,
3936 	    "lba 0x%x len 0x%lx xfercount 0x%lx total 0x%lx",
3937 	    lba, len, cmd->cmd_xfercount, cmd->cmd_total_xfercount);
3950  * The lba computation was being done based on scsa2usb_max_bulk_xfer_size
3953  * xfer_count all over again. Adjust lba, based on the previous requests'
3954  * len. Find out the len and add it to cmd->cmd_lba to get the new lba
3967 	    "scsa2usb_setup_next_xfer: opcode = 0x%x lba = 0x%x "
3981 	 * Also adjust len/lba based on the block_size and xfer_count.
3982 	 * NOTE: Always calculate lba first, as it based on previous
3987 		/* calculate lba = current_lba + len_of_prev_cmd */
3997 		/* calculate lba = current_lba + len_of_prev_cmd */
4008 		/* calculate lba = current_lba + len_of_prev_cmd */
4026 	/* fill in the lba */
4673 scsa2usb_fill_up_cdb_lba(scsa2usb_cmd_t *cmd, int lba)
4675 	/* zero cdb1, lba bits so they won't get copied in the new cdb */
4677 	cmd->cmd_cdb[SCSA2USB_LBA_0] = lba >> 24;
4678 	cmd->cmd_cdb[SCSA2USB_LBA_1] = lba >> 16;
4679 	cmd->cmd_cdb[SCSA2USB_LBA_2] = lba >> 8;
4680 	cmd->cmd_cdb[SCSA2USB_LBA_3] = (uchar_t)lba;
4681 	cmd->cmd_lba = lba;